User manual BEITER ARM

Update 01/2004 The ARMGUARD Insert the Rubber Bands as displayed to avoid malfunction. Do not knot the Rubber Band ends together, but do knot the ends separately! If you have to cut the Rubber Band insert the fastener and use a lighter to burn the ends of the Rubber Band. Make a knot at both ends of the Rubber Band! If you want to fit the Armguard to your arm, simply pull one end of the Rubber Band. Pressing the Fastener you release it. It is possible to combine 2 or more Amguard bodies as shown in the drawing. So you may avoid any bigger string contact, for example if the archer are wearing a loose fit clothing. A fastener can be used in combination with a rubber band to make an ideal fit for almost any finger tab. Following items can be ordered for this purpose: ARG15 Rubber Band 15cm ARF35 Fastener Heavy Orange HINT: Fluor Pins may be easily stored in the Beiter Armguard (as shown in the picture!) Tel. +49 7720 856860 Fax +49 7720 4238 email: info@wernerbeiter.com Werner Beiter Daimlerstr. 18 DE-78083 Dauchingen www.WernerBeiter.com