Update 01/2004 The NOCK ADAPTER The Beiter Nock Adapter is a very useful tool. The most important function of the Beiter Nock Adapter is to allow fletching your vanes or feathers with a perfect angle on your fletching jig (normally 120°). The Beiter Nock Adapter can be used with any fletching jig on the market and is included in all Beiter Tri-Liner. The Beiter Nock Adapter may also be used to mark arrows, e.g. on spare shafts, to avoid accidentally shooting arrows from your quiver . Engaging the Nock Adapter Disengage the Nock Adapter The PUSH'N'PULL The Beiter Push'n'Pull is a tool to install, turn or exchange all type of Beiter Nocks. For a correct use, insert the Push'n'Pull from behind the nock (do not try to click it in from the back!), take the Push'n'Pull... ...Between two finger. Now you can install or extract nocks by turning the Push'n'Pull and applying the requested force, without damaging the rear end of the nock!! Werner Beiter Daimlerstr. 18 DE-78083 Dauchingen www.WernerBeiter.com Tel. +49 7720 856860 Fax +49 7720 4238 email: info@wernerbeiter.com ...