Detailed instructions for use are in the User's Guide.
- SCOPE Ø29 - DLX
D C B Basic Unit: A
A: 1 Scope-Body B: 1 ZEISS - Lens Ø29mm C: 1 O-Ring for lens 1 O-Ring 4x2 or 5x2 D: 1 Clear Threadring
Update 10/01
The Basic Unit has to be combined with one or more of the following aiming kits. Colours: Red, Green, Orange, Black. Aiming Kit I: - 1 support for level Ø10mm with pin - 1 support for level Ø10mm - 1 holder for support - 1 ring ea. Ø4mm, Ø6mm, Ø9mm - 1 square ea. 6mm and 9mm - 1 level Ø10mm Aiming Kit II: - 1 shield for level - 1 shield for level with pin - 1 ring ea. Ø4mm, Ø6mm, Ø9mm - 1 square ea. 6mm and 9mm - 1 standard level in the desired combination
Options:
Right- or Lefthanded Threads: #10-32, #8-32 Colours: Black, Clear, Red, Green
Lenses:
Convex/concave ZEISS-Lenses, extra-coated, Ø29mm.. Power: + 0.25,+ 0.50, + 0.75, + 1.00, +1.25
ACCESSORIES:
WEATHERSHIELD Colours: Black, Red, Light THREADRINGS Colours :Black, Clear, Red, Green - without Crosshair - Crosshair, Hole-Ø1,5mm - Crosshair, Hole-Ø2,5mm FLUORPINS Colours: Red, Green Orange, Blue, Black - for Hole-Ø1,5mm/sightn1,5mm - for Hole-Ø2,5mm/sight n2,5mm Colours: Red, Green Orange - for Hole-Ø1,5mm/sight n2,5mm - for Hole-Ø2,5mm/sight n3,5mm LEVEL IN HOLDER - green level in clear holder - red level in clear holder - green level in black holder - red level in black holder LEVEL Ø10MM SYSTEM The Level Ø10mm system consists out of: 1 support with or without pin, 1 Holder for support and 1 level Ø10mm Colours: Black, Red, Green, Orange, Clear Mounting Advice: mount the desired sight insert on the support. Clip the level into the support and insert it (pins backwards) in the device of the scope body. Now clip in the holder for support. Effect: the level will turn into the colour of the used support/holder combination!
SHIELD for LEVEL Without Pin (d), with or without pin, Colours: Black, Red, Green, Orange, Clear MOUNTING ADVICE To install the shield, first push out the level, than insert the shield (pins backwards) in the device of the scope body. Reinstall and clip in the level.
i d e
MOUNTING ADVICE ATTENTION: The Scope must be fixed tight to the sight! Use following Beiter Spacers: - #8-32 (black) 2mm (a) and 5mm (b) - #10-32 (grey) 2mm (a) and 5mm (b) - O-Ring 4x2 for #8-32 (c) - O-Ring 5x2 for #10-32 (c)
b c a
g
SIGHT INSERTS Rings and Square in following colours: Black, Red, Green, Orange Rings: 4mm (f), 6mm (i) or 9mm (g) Square: 6mm (j) or 9mm (h) Use the 4mm Ring only on the shield for level without pin! Using sight inserts, the cross in the thread ring should be cut out with small pliers.
f h j
Werner Beiter - Daimlerstraße 18 - D-78083 Dauchingen Tel. +49/7720/85680 Fax+49/7720/4238 www.wernerbeiter.com MADE IN GERMANY e-mail: info@wernerbeiter.com
...
