Update 01/2004 The TWISTER Features of the BEITER TWISTER: The Beiter Twister is a tool, to easier serve a serving with the Beiter Winder. Developed together with the Beiter Winder, the Beiter Twister is available as an option. It is a device, which helps the archer in different ways, for example: On one side it stabilises the serving jig - your Winder! - , while serving. (pic.1) Than it can be engaged and used as to serve the serving faster, tighter and more accurate. (pic.2) A third option is that you can open the serving - without losing tension -, if you served too much or in the wrong way. (pic.3) The Beiter Twister can be ordered as a single spare part (and used an all Beiter Winder already on the market), but it can be also ordered in combination with the Beiter Winder. In any case instructions are enclosed! Instructions: Start to serve as usual. Install the Beiter Twister on the string and turn the black cap so, that the Beiter Twister can not leave the string (pic.4). Fix the Twister on the Winder, klicking it in on the opposite side of the slot - there are two guiding "noses" on the correct side (pic.5). You can engage and dis-engage the Twister from the Winder. pic. 1 pic. 2 pic. 3 pic. 4 Code-numbers: WIETWISTERBL -> Winder, Twister Blue , WIETWSITERGRBL -> Winder, Twister for Winder Profi pic. 5 Werner Beiter Daimlerstr. 18 DE-78083 Dauchingen www.WernerBeiter.com Tel. +49 7720 856860 Fax +49 7720 4238 email: info@wernerbeiter.com ...