User manual BELKIN F1DA108T

OmniView PRO2 Series KVM Switch User Manual F1DA104T F1DA108T F1DA116T TM PRO2 Series 13 TABLE OF CONTENTS Overview Feature Overview . . . . . . Equipment Requirements Operating Systems . . . . . Unit Display Diagrams . . Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 .3 .4 .5 .7 Installation Pre-Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Step-by-Step Installation Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Single PRO2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Connecting Multiple PRO2s (Daisy-Chaining) . . . . . . . . . . . . . . . . . . .12 Powering up the Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Using your PRO2 Selecting a Computer Using Keyboard Hot Key Commands AutoScan Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Selecting a Computer Using Direct-Access Port Selectors . . Bank Up and Bank Down Scroll Buttons . . . . . . . . . . . . . . On-Screen Display Menu Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 . . .18 . . .18 . . .18 . . .20 Belkin KVM Switches and Accessories OmniView KVM Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 OmniView All-In-One KVM Cables . . . . . . . . . . . . . . . . . . . . . . . . . . .25 OmniView Accessories and Adapters . . . . . . . . . . . . . . . . . . . . . . . . . .26 PRO2 Series FAQs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 OmniView PRO2 Series KVM Switch TM Congratulations on your purchase of this Belkin OmniView PRO2 Series KVM Switch (the PRO2). Our diverse line of KVM solutions exemplifies the Belkin commitment to delivering high-quality, durable products at a reasonable price. Designed to give you control over multiple computers and servers from one console, Belkin PRO2s come in a variety of capacities suitable for all configurations, large or small. Belkin has designed and developed this PRO2 with the server administrator in mind. The result is a KVM Switch that surpasses any other switch on the market. The PRO2 is engineered to work with the most advanced server room and laboratory environments, offering intuitive port indicators, direct-access port selectors, high video resolution support, and flash upgradeable firmware. The PRO2 also comes with an unparalleled Belkin Five-Year Warranty. This manual will provide details about your new PRO2, from installation and operation to troubleshooting--in the unlikely event of a problem. For quick and easy installation, please refer to the Quick Installation Guide included in your PRO2 packaging. Thank you for purchasing the PRO2. We appreciate your business and have confidence that you will soon see for yourself why over 1 million Belkin OmniView products are being used worldwide. Package Contents · · · · · · · OmniView PRO2 Series KVM Switch Adjustable Rack-mount Brackets with Screws DB25-to-RJ45 Parallel Flash Cable User Manual Quick Installation Guide 12-Volt DC, 1-Amp Power Supply Registration Card 1 OVERVIEW The PRO2s allow you to control up to a maximum of 256 computers with one keyboard, monitor, and mouse. They support PS/2 input devices (keyboard and mouse) as well as VGA, SVGA, XGA, and XGA-2 video. They support both PS/2 and USB output. This enables cross-platform control over PCs and USB-based computers including USB SunTM workstations and Mac® computers. Feature Overview Hot Keys: Hot key functionality allows you to select a desired port using designated key commands. By using a simple hot key sequence on your keyboard, selecting one computer from as many as 256 computers is instantaneous. For a listing of complete hot key instructions and commands, see pages 17-19. AutoScan: The AutoScan feature allows you to set your PRO2 to scan and monitor the activities of all operating computers connected to the switch--one by one. The time interval allotted for each computer can be defined or adjusted through the On-Screen Display (OSD) menu. For complete instructions on AutoScan usage, please refer to page 18. Video Resolution: Through a 400MHz bandwidth, the PRO2s support video resolutions of up to 2048x1536@85Hz. To preserve signal integrity at these higher resolutions, your PRO2 requires 75-Ohm coaxial VGA cabling. Flash Upgrade: Flash upgradeable firmware allows you to install the latest firmware for your PRO2. This enables your PRO2 to maintain consistent compatibility with the latest devices and computers. Firmware upgrades are free for the life of your PRO2. Refer to the enclosed flash upgrade instruction document or visit us at belkin.com for complete upgrade information and support. On-Screen Display (OSD): The OSD feature simplifies server management by allowing you to assign individual names to each connected server throughout the system. It provides a visual means of switching between computers and setting the time interval for the AutoScan function. 2 OVERVIEW Front-Panel Push Button: Direct-access port selectors, located conveniently on the front panel of the PRO2, allow for simple, manual port-selection. Each button controls a port. LED Display: An LED display on the face of the PRO2 serves as a status monitor. An LED next to each direct-access port selector illuminates to indicate that the console currently controls the corresponding computer. As a port selector is pushed, the LED next to it will light up. A flashing port LED indicates that there is no computer connected to that port. Seven-Segment LED Display: When daisy-chaining multiple PRO2s together, the seven-segment LED display serves as a quick indicator of the selected BANK. Equipment Requirements Cables: To connect to the PRO2, each PS/2 computer requires one VGA cable, one PS/2 keyboard cable, and one PS/2 mouse cable. Keyboard and mouse cables must have PS/2 male-to-PS/2 male connectors. Each USB computer requires one VGA cable and one USB A-to-B cable. Video resolution support of up to 2048x1536@85Hz requires use of a 75-Ohm coaxial VGA cable to preserve signal integrity. VGA cables must have HDDB15 female-to-HDDB15 male connectors. Belkin highly recommends that you use OmniView All-In-One PRO Series Plus or Gold Series Cables. These cables offer the highest quality possible to ensure optimal data transmission. All-In-One Cables are molded together for a clean and organized setup; are double-shielded to reduce EMI/RFI interference; have strain-relief construction for added durability; come with a ferrite bead for noise immunity; and include PC99 color-coded connectors for easy identification and connection. The PRO Series Plus Cables include an industry-standard, 14-pin, coaxial VGA cable and nickel-plated connectors for high-resolution applications. The Gold Series Cables have a custom, 15-pin, coaxial VGA cable and gold-plated connectors for superior clarity, connectivity, and error-free data transmission. OmniView Cables are 3 OVERVIEW available in both USB and PS/2 connector types. The following cables are recommended for your PRO2: OmniView All-In-One PRO Series Plus F3X1105-XX F3X1962-XX (PS/2 Style) (USB Style) USB Style (PS/2 Style) (USB Style) OmniView All-In-One Gold Series F3X1835-XX-GLD F3X1895-XX-GLD PS/2 Style (-XX denotes length in feet) Operating Systems OmniView PRO2 Series KVM Switches are for use on CPUs using: Platforms: · Windows® 95/98/2000/Me/NT®/XP · DOS · Turbolinux® and all Linux® distributions · Novell® NetWare® 4.x/5.x · Mac (with USB support) · Sun (with USB support) Keyboards: · Supports 101-/102-/104-key keyboards Mice: · Microsoft® system-compatible PS/2 or PS/2 & USB combo mice (with PS/2 adapter) having 2, 3, 4, or 5 buttons · Microsoft system-compatible PS/2 wireless or optical mice Monitor: · VGA · SVGA · MultiSync® 4 OVERVIEW Side View of the PRO2: F1DA108T BANK DIP switch (may be located on the back in some models) FLASH DIP switch (may be located on the back in some models) ON 1 2 3 4 5 6 ON BANK 1 2 3 4 FLASH 5 OVERVIEW Front View of the PRO2: F1DA108T AutoScan button LED for selected port identification 7-segment LED for selected BANK identification Direct-access port selector Manual BANK scroll buttons Back View of the PRO2: F1DA108T Console VGA Computer VGA port Computer USB port USB 04 USB 03 Console PS/2 mouse/keyboard ports Master Input/Slave Output Slave Input Computer PS/2 mouse/keyboard ports Flash upgrade port DC power jack 6 OVERVIEW Specifications Part No.: F1DA104T, F1DA108T & F1DA116T Power: 12-Volt DC, 1-Amp power adapter with center-pin positive polarity Daisy-Chain: Maximum of 16 KVM Switches Computer Connections Supported: 4 (F1DA104T) 8 (F1DA108T) 16 (F1DA116T) Keyboard Emulation: PS/2 Mouse Emulation: PS/2 Monitors Supported: VGA, SVGA, MultiSync, and LCD (optional adapter may be required) Max. Resolution: 2048x1536@85Hz Bandwidth: 400MHz Keyboard Input: 6-pin miniDIN (PS/2) Mouse Input: 6-pin miniDIN (PS/2) VGA Port: 15-pin HDDB type Port LED Indicators: 4 (F1DA104T) 8 (F1DA108T) 16 (F1DA116T) Enclosure: Metal enclosure with high-impact plastic faceplate Dimensions: (F1DA104T) 11 x 1.75 x 6 inch (279mm x 44.5mm x 150mm) (F1DA108T)17.25 x 1.75 x 7.5 inch (438mm x 44.5mm x 190mm) (F1DA116T) 17.25 x 3.5 x 7.5 inch (438mm x 89mm x 190mm) Weight: (F1DA104T) 5.3 lbs. (2414.5 grams) (F1DA108T) 9.2 lbs. (4181.5 grams) (F1DA116T) 12 lbs. (5472.5 grams) Operating Temp.: 32° to 104° F (0~40° C) Storage Temp.: -4° to 140° F (20~60° C) Humidity: 0-80% RH, non-condensing Warranty: 5 years Note: Specifications are subject to change without notice. 7 INSTALLATION Pre-Configuration Where to Place the PRO2: The enclosure of the PRO2 is designed for standalone or rack-mount configuration. The 8- and 16-port PRO2s are natively rack-mountable in standard 19-inch server racks. Rack-mount hardware is included with these switches for a study rack installation. An optional rack-mount kit (F1D005) is available for use with the 4-Port PRO2. Consider the following when deciding where to place the PRO2: · whether or not you intend to use the direct-access port selectors; · the lengths of the cables attached to your keyboard, monitor, and mouse; · the location of your CPUs in relation to your console; · and the lengths of the cables you use to connect your computers to the PRO2. Cable Distance Requirements: For PS/2 computers: VGA signals transmit best up to 25 feet. Beyond that length, the probability of video degradation increases. For this reason, we recommend that the length of the cables between the PRO2 and the connected computers does not exceed 25 feet. Note: If you need your console to reside further than 25 feet from the PRO2, we recommend using the Belkin CAT5 Extender (F1D084) with a standard CAT5 UPT cable. By using this device, you may increase the distance between your PRO2 and your keyboard, mouse, and monitor by as much as 500 feet without risking signal degradation. For USB computers: USB signals can be transmitted up to 15 feet between the PRO2 and the CPU. Beyond 15 feet, the probability of signal failure is likely, and this may cause the device to fail. Cautions and Warnings: Avoid placing cables near fluorescent lights, air conditioning equipment, or machines that create electrical noise (e.g., vacuum cleaners). 8 INSTALLATION Step-by-Step Installation Guide Cautions and Warnings: Before attempting to connect anything to the PRO2 or your computer(s), please ensure that everything is powered off. Plugging and unplugging cables while computer(s) are powered on may cause irreversible damage to the computer(s) and/or the PRO2(s). Belkin Components is not responsible for damage caused in this way. Installing the PRO2 into a Server Rack: Bracket Installation (F1DA108T and F1DA116T only) Eight- or 16-Port PRO2s include adjustable mounting brackets ideal for installation in 19-inch racks. The mounting brackets feature three adjustment positions to allow the faceplate of the PRO2 to mount flush to your rack-mounted servers, or to the rack. Please follow these simple steps to achieve the desired adjustment. The 4-Port PRO2 requires an optional mounting kit (F1D005). 1. Remove the adjustable brackets from the box. (The adjustable brackets allow you to set the PRO2's face flush with the ends of the rails or to extend the PRO2 past the front of the rails). 2. Determine how far you would like the PRO2 to protrude from the rack. Select a bracket-hole scheme. 3. Attach the bracket to the side of your PRO2 using the Phillips screws provided. (Refer to diagram above). 4. Mount the PRO2 to the rack rail assembly. Note: If this PRO2 will be daisy-chained to another PRO2, set the BANK address prior to installing on a rack. Refer to the section in this user manual labeled "Connecting Multiple PRO2s (Daisy-Chaining)". 9 INSTALLATION Your PRO2 is now mounted securely into the bracket and you are ready to connect cables to the back of the unit. Note for Belkin PRO Series owners (F1D104-OSD, F1D108-OSD, F1D116-OSD): Installation for the PRO has changed. Please follow this installation manual completely to assure proper installation. Failure to do so may result in keyboard or mouse errors, and/or faulty operation. Single PRO2 Installation This section provides complete instructions for the hardware setup of a single PRO2. (F1DA104T, F1DA108T, and F1DA116T) PS/2 Installation: Keyboard, Video, and Mouse Connections Connect the Console: 1. Connect the monitor to the PRO2. Attach your monitor cable to the HDDB15 female port on the back of the PRO2 labeled "Console VGA". 2. Connect the PS/2 keyboard cable to the keyboard port on the back of the PRO2 in the "Console" section. 3. Connect the PS/2 mouse cable to the mouse port on the back of the PRO2 in the "Console" section. VGA VGA08 USB 08 VGA07 06 VGA 06 USB 06 VGA 05 VGA 04 USB 04 VGA03 VGA 02 USB 02 VGA 01 08 USB 07 07 06 USB 05 05 04 USB 03 03 02 USB 01 01 VGA VGA08 USB 08 VGA07 06 VGA 06 USB 06 VGA 05 VGA 04 USB 04 VGA03 VGA 02 USB 02 VGA 01 08 USB 07 07 06 USB 05 05 04 USB 03 03 02 USB 01 01 F9 F10 F11 num lock cap lock pg up 1 2 3 4 5 6 7 8 9 P 0 [ - = delete HOME PG UP PG DN = 7 4 1 8 5 2 / 9 - ] HELP CAPS ` + K L ;: '" return ESC OPT PC 6 3 shift clt ^ < alt + > 0 Attach the power supply to the DC power jack labeled "DC 12V, 1A" located on the rear of the PRO2. Once the power is connected to a power source, the LED for port 01 will begin flashing. Sequentially push the direct-access port selectors for ports 01 through 08 (04 for F1DA104T and 16 for F1DA116T). The corresponding LED should flash as each button is pressed, indicating that the port is ready for connecting your servers (computer connection). 10 INSTALLATION Connect the Computer: PS/2 Installation 1. Using an OmniView KVM Cable (Belkin part# F3X1105-XX or F3X1835-XX-GLD), plug in the male VGA connector to the VGA port on the computer. Connect the other end (the female connector) of the VGA cable to the back of the PRO2 labeled "VGA 01". 2. Connect the PS/2 keyboard and PS/2 mouse connectors of the cable to the keyboard and mouse ports on the computer. Connect the other ends of the cables to the keyboard and mouse ports located directly underneath VGA 01 on the PRO2 (Belkin part # F3X1105-XX or F3X1835-XX-GLD). VGA VGA08 USB 08 VGA07 06 VGA 06 USB 06 VGA 05 VGA 04 USB 04 VGA03 VGA 02 USB 02 VGA 01 08 USB 07 07 06 USB 05 05 04 USB 03 03 02 USB 01 01 3. Repeat steps 1 and 2 for each additional PS/2 computer you wish to connect. USB Installation: Boot the computer you wish to connect via USB as you would normally with the keyboard, monitor, and mouse connected directly to the computer. After the operating system finishes loading, connect the PRO2 to the USB computer using the USB A-to-B cable that is part of your USB KVM Cable (Belkin part# F3X1962-XX or F3X1895-XX-GLD). Your computer should recognize your PRO2 and automatically install the HID USB driver if necessary. Once your computer finishes installing the USB driver, you can power down your computer to connect it to the PRO2. 11 INSTALLATION 1. Using a USB KVM Cable (Belkin part# F3X1962-XX or F3X1895-XX-GLD), plug the male VGA connector into the VGA port on the computer. Connect the other end (the female connector) of the VGA cable to the back of the PRO2 for the appropriate port you wish to connect to (for example, "VGA 02"). 2. Connect the USB cable's "A-type" connector to an available USB port on your USB computer. Connect the other end of the USB cable (with the "B-type" connector) to the corresponding port on the back of the PRO2 (for example, "USB 02"). VGA VGA08 USB 08 VGA07 06 VGA 06 USB 06 VGA 05 VGA 04 USB 04 VGA03 VGA 02 USB 02 08 USB 07 07 06 USB 05 05 04 USB 03 03 02 USB 01 VGA 01 01 NOTE: We recommend you attach the KVM cable directly to a free USB port on your computer. Repeat steps 1 and 2 above for each additional USB computer you wish to connect. Connecting Multiple PRO2s (Daisy-Chaining) You can daisy-chain up to 16 PRO2s together, giving a server administrator control over a maximum of 256 computers. When daisy-chained together, each unit is referred to as a "BANK" and assigned an address. The Console keyboard, mouse, and monitor connects to BANK 00 and is referred to as the "Master" switch. BANKs 01 through 15 are referred to as "Slave" switches. Note: A daisy-chain cable (F1D108-CBL) is required to daisy-chain each PRO2 and is available through your Belkin reseller or online at belkin.com. All PRO2s feature a "BANK DIP" switch. The BANK DIP switch is used for proper identification and use of PRO2s in a single-unit or daisy-chain configuration. · For a single-unit configuration, set the BANK DIP switch on the PRO2 to the "Master" (BANK address 00) setting. This is the factory default setting. · For multi-unit configuration, the BANK DIP switch on the Master unit must be set to "BANK address 00". Slave units must be set to a unique BANK address (from 01 through 15). Refer to the chart below for BANK DIP switch settings. 12 INSTALLATION BANK DIP Switch Configuration Chart DIP SWITCH# 1 ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON 2 ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON 3 ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF 4 ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF 5 ON ON ON ON OFF OFF OFF OFF ON ON ON ON OFF OFF OFF OFF 6 ON BANK 00 MASTER (default) ON BANK 01 SLAVE ON BANK 02 SLAVE ON BANK 03 SLAVE ON BANK 04 SLAVE ON BANK 05 SLAVE ON BANK 06 SLAVE ON BANK 07 SLAVE OFF BANK 08 SLAVE OFF BANK 09 SLAVE OFF BANK 10 SLAVE OFF BANK 11 SLAVE OFF BANK 12 SLAVE OFF BANK 13 SLAVE OFF BANK 14 SLAVE OFF BANK 15 SLAVE BANK ADDRESS Note: "On" is the down position. Example: Four 8-Port PRO2s (F1DA108T) are daisy-chained together for controlling up to 32 computers. The DIP switch on the Master unit is set to "BANK 00" (factory default) and the Slave units are each set to a unique BANK (between 01 and 15). 13 INSTALLATION Installation Before You Begin: 1. Make sure that all computers are powered off and that each PRO2 has been assigned a unique BANK address. 2. Place Master and Slave switches in the desired location. Make sure all are turned off and unplugged from the power source. 3. Connect the Console monitor, keyboard, and mouse to the Console ports of the Master switch or Bank 00, as described previously in this installation guide. Connecting the Master Switch to the First Slave Switch: 4. Using the daisy-chain cable (F1D108-CBL), connect one end of the cable to the "Master Input/Slave Output" port on the Master switch (BANK 00). 5. Connect the other end of the daisy-chain cable to the "Master Input/Slave Output" port of the first Slave switch (BANK 01). Adding Additional Slave Units: 6. Using the daisy-chain cable (F1D108-CBL), connect one end of the cable to the available daisy-chain port labeled "Slave Input" on the Slave switch (for example, BANK 01). 7. Connect the other end of the daisy-chain cable to the "Master Input/Slave Output" port of the Slave switch that you are adding (for example, BANK 02). 8. Repeat steps 6 and 7 for additional PRO2s you wish to daisy-chain together. 14 INSTALLATION Example of Daisy-Chain Configuration: Slave Input VGA VGA08 VGA07 06 VGA 06 USB 06 VGA 05 VGA 04 USB 04 VGA03 VGA 02 VGA 01 Master Input /Slave Output USB 08 USB 02 08 USB 07 07 06 USB 05 05 04 USB 03 03 02 USB 01 01 cable 1 Slave Input VGA VGA08 Master unit (BANK 00) Master Input /Slave Output USB 08 VGA07 06 VGA 06 USB 06 VGA 05 VGA 04 USB 04 VGA03 VGA 02 USB 02 VGA 01 08 USB 07 07 06 USB 05 05 04 USB 03 03 02 USB 01 01 Slave unit cable 2 Slave Input VGA VGA08 VGA07 06 VGA 06 (BANK 01) Master Input /Slave Output USB 08 USB 06 VGA 05 VGA 04 USB 04 VGA03 VGA 02 USB 02 VGA 01 08 USB 07 07 06 USB 05 05 04 USB 03 03 02 USB 01 01 Slave unit cable 3 Slave Input VGA VGA08 VGA07 06 VGA 06 USB 06 (BANK 02) Master Input /Slave Output USB 08 VGA 05 VGA 04 USB 04 VGA03 VGA 02 USB 02 VGA 01 08 USB 07 07 06 USB 05 05 04 USB 03 03 02 USB 01 01 Slave unit (BANK 03) Connecting the Computers: 9. Connect all computers to the Master and Slave switches. Refer to "Single PRO2 Installation" on page 10 for instruction on how to connect the Console and the computers to the PRO2. 10. Connect the power supply to the Master switch. Power up the Master switch. You should see the Master switch light up and display the digits "00", indicating its BANK address. 11. Power up the Slave switches sequentially, beginning with Bank 01, by connecting each unit's power supply. Each switch should display its corresponding BANK address number as it is powered up. Note: If the PRO2s do not enumerate correctly, reset the Master switch (BANK 00) by simultaneously pressing the "BANK +" and "BANK ­" buttons. You can also reset the Master switch to detect newly added Slave switches. If the switches still do not enumerate correctly, check that all switches have the correct BANK address assigned to them and that all daisy-chain cables are connected properly. 12. Verify that the Master unit has detected all Slave switches by scrolling through the BANKS using the BANK up and BANK down buttons. If all Slave switches are detected properly, the LED display on the Master switch will register and display the attached Slave switch's BANK address. 15 USING YOUR PRO2 Powering up the Systems Once all cables have been connected, power up the computers that are attached to the PRO2. All computers can be powered on simultaneously. The PRO2 emulates both a mouse and keyboard on each port and allows your computer to boot normally. The computer connected to port "1" will be displayed on the monitor. Check to see that the keyboard, monitor, and mouse are working normally. Proceed to do this with all occupied ports to verify that all computers are connected and responding correctly. If you encounter an error, check your cable connections for that computer and reboot. If the problem persists, please refer to the Troubleshooting section in this manual. Using Your PRO2: Now that you have connected your Console and computers to your PRO2, it is ready for use. Select connected computers by either the direct-access port selectors, located on the front panel of the PRO2, using the On-Screen Display, or by using hot key commands through the Console keyboard. It takes approximately 1-2 seconds for the video signal to refresh after switching computers. Re-synchronization of the mouse and keyboard signals also occurs. This is normal operation and ensures that proper synchronization is established between the Console and the connected computers. 16 USING YOUR PRO2 Selecting a Computer Using Keyboard Hot Key Commands: Switch to the next or previous port with simple keyboard key sequences using the "Scroll Lock" key and either the up or down arrow keys. To send commands to the PRO2, the "Scroll Lock" key must be pressed twice within two seconds. The PRO2 will beep, confirming that it is in hot key mode. Next, press the up or down arrow keys, and the PRO2 will switch to either the prior port or the next port. + + + + Switch to next active port--Down arrow Switch to previous active port--Up arrow With a single-switch configuration (no daisy-chained switches), you can switch directly to any port by entering the two-digit number of the port you wish to access. For example, if you press "Scroll Lock", "Scroll Lock", "02", the PRO2 will switch to the computer on port 2 located on BANK 00. + + Switch to BANK 00, Port 2--(02) Note: You will have approximately five seconds to complete each hot key sequence. With daisy-chain switch configuration, you can switch between BANKs by pressing "Scroll Lock", "Scroll Lock", "Page Up", to switch to the previous BANK. Press "Scroll Lock", "Scroll Lock", "Page Down", to switch to the next BANK. + + Page Up + + Page Down Switch to previous BANK--Page Up Switch to next BANK-- Page Down 17 USING YOUR KVM SWITCH With a daisy-chain switch configuration, you can switch directly to any port on any BANK by pressing "Scroll Lock", "Scroll Lock", BANK address, and port number. For example, if you press "Scroll Lock", "Scroll Lock", "03", "05", the computer on BANK 03, Port 5 will become active. + AutoScan Mode: + 3+ 5 Pressing the AutoScan button on the PRO2 will activate the AutoScan function. In AutoScan mode, the PRO2 remains on one port for a pre-set number of seconds, before switching to the next computer. This time interval can be adjusted via the On-Screen Display menu. Note: There is no mouse or keyboard control in AutoScan mode. This is necessary to prevent data and synchronization errors. If the user is using the mouse or keyboard when the PRO2 is switching between ports, data flow may become interrupted and could result in erratic mouse movement and/or wrong-character input when using the keyboard. Press any button on the front panel or any key on the keyboard to disable AutoScan. Selecting a Computer Using Direct-Access Port Selectors: You can directly select which computer you wish to control by pressing the direct-access port selector next to the corresponding port. The LED will illuminate to indicate the port is currently selected. If you are installing multiple PRO2s that are daisy-chained, use the BANK scroll keys located on the front panel of the Master switch to access other computers that are connected to the Slave switches. BANK Up and BANK Down Scroll Buttons: Pressing the BANK + and BANK ­ scroll buttons on the Master switch will allow you to switch between the daisy-chained PRO2s. Pressing both buttons simultaneously will reset the PRO2. The BANK + button will take you to the next BANK. For example, when you are at the Master switch (BANK 00) and want to check computers on BANK 02, pressing the BANK + button will take you to BANK 02. As a default, the 18 USING YOUR PRO2 first active computer will be displayed on the Console monitor. Use the direct-access port selectors to go to the desired computer on BANK 02. The "BANK ­ " button will take you to the previous BANK. For example, when you are at BANK 02 and want to check computers in BANK 01. Pressing the "BANK ­ " button will take you to BANK 01. As default, the first active computer will be displayed on the Console monitor. Use the direct-access port selectors to go to the desired computer on BANK 01. Keyboard Hot Key Commands: Conveniently command the PRO2 to switch ports through simple keyboard key sequences. To send commands to the PRO2, the "Scroll Lock" key must be pressed twice within two seconds. You will hear a beep for confirmation. Below is a complete list of hot key commands: Note: you will have approximately five seconds to complete each hot key sequence. SL SL SL Switch to PREVIOUS ACTIVE port Switch to NEXT ACTIVE port Switch to PREVIOUS BANK (By default, selects first active port on the BANK) SL SL Page Down Switch to NEXT BANK (By default, selects first active port on the BANK) SL SL Y Directly switches to PORT Y on BANK 00 (Single-Switch Configuration) Y=01 to 16 SL SL X Y Directly switches to PORT Y on BANK X (Daisy-Chain Configuration) (X=00 to 15) (Y=01 to 04 for F1DA104T) (X=00 to 15) (Y=01 to 08 for F1DA108T) (X=00 to 15) (Y=01 to 16 for F1DA116T) SL SL Delete Reset On-Screen Display menu SL SL S Disable sound in AutoScan mode SL SL Space Bar Activate On-Screen Display SL SL A Enable AutoScan mode (Refer to AutoScan button) SL SL SL Up Arrow Down Arrow Page Up 19 USING YOUR PRO2 On-Screen Display Menu Control: