2-Port KVM Switch with Audio Support and Built-In Cabling Control two computers using one video monitor, and a PS/2 keyboard and mouse User Manual F1DL102P TABLE OF CONTENTS Introduction Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Overview Feature Overview . . Operating Systems . Unit Display Diagram Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 .3 .4 .5 Installation Pre-Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Step-By-Step Installation Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Using your Switch Powering Up the Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 AutoScan Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 FAQs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 INTRODUCTION Congratulations on your purchase of this Belkin 2-Port KVM Switch with Audio Support and Built-In Cabling (the Switch). The diverse line of market-leading KVM solutions from Belkin exemplifies our commitment to delivering high-quality, durable products at a competitive price. Engineered to give you control over multiple computers and/or servers from one console, Belkin KVM switches come in a variety of capacities suitable for all configurations, large or small. This Switch is backed by a Belkin Three-Year Warranty and free technical support. This manual will provide you details about your new Switch, from installation and operation, to troubleshooting--in the unlikely event of a problem. For easy installation, please refer to the Quick Installation Guide included with your Switch. Thank you for purchasing the Belkin 2-Port KVM Switch with Audio Support and Built-In Cabling. We appreciate your business. Package Contents · 2-Port KVM Switch with Audio Support and Built-In Cabling · User Manual · Quick Installation Guide · Registration Card 1 OVERVIEW The Belkin 2-Port KVM Switch with Audio Support and Built-In Cabling allows you to control multiple computers with one keyboard, monitor, and mouse. The Switch supports PS/2 input devices (keyboard and mouse), VGA, SVGA, XGA, and PS/2 computers. Feature Overview Complete Compact Solution Built-in cables and color-coded connectors make operation and organization easy. Microphone/Audio Support Built-in microphone, speaker jacks, and cables support your small- and home-office multimedia add-ons. This feature reduces clutter by eliminating the need to unplug and re-plug speakers and mics when you switch between computers. Hot Keys Hot keys allow you to select ports using designated key commands. Control multiple computers using a simple hot key sequence on your keyboard. AutoScan The AutoScan feature allows you to automatically scan and monitor the activities of all operating computers connected to your Switch one by one. Video Resolution The Switch is able to support video resolutions of up to 2048x1536@65Hz. To preserve signal integrity at high resolutions, 75-Ohm coaxial VGA cabling is built-in to your Switch. 2 OVERVIEW Light-Emitting Diode Display LEDs on the top of the Switch function as status monitors. The LEDs light to indicate which corresponding monitor port is currently active. Operating Systems Your Switch is for use on CPUs using: Platforms · Windows® 95, 98, 2000, Me, NT®, XP · DOS · Linux® · Novell® NetWare® 4.x/5.x Keyboards · Supports 101-, 102-, and 104-key keyboards Mice · Microsoft® system-compatible PS/2 mice with 2, 3, 4, or 5 buttons Monitors · VGA · SVGA · MultiSync® Speakers · Stereo 3 OVERVIEW Unit Display Diagram The 2-Port KVM Switch with Audio Support and Built-In Cabling: Port Status Indicator LEDs Built-In Cables Console Speaker Jack Console Mouse Port Console VGA Monitor Port Console Keyboard Port Console Mic Jack 4 OVERVIEW Specifications Part No.: F1DL102P PCs Supported: 2 Keyboard Emulation: PS/2 Mouse Emulation: PS/2 Monitors Supported: VGA, SVGA, MultiSync, and LCD (with use of adapter cable) Max. Resolution: 2048x1536@65Hz Keyboard Input: 6-pin miniDIN (PS/2) Mouse Input: 6-pin miniDIN (PS/2) Audio/Mic Input: 3.5mm jack VGA Port: 15-pin HDDB type LED Indicators: 2 Enclosure: Plastic Dimensions: (H) 27.5 x (W) 82 x (D) 81.25mm Weight: 1.3 lbs. Operating Temp: 32° to 104° F (0° to 40° C) Storage Temp: -4° to 140° F (-20° to 60° C) Humidity: 0-80% RH, non-condensing Warranty: 3 years NOTE: Specifications are subject to change without notice. 5 INSTALLATION Pre-Configuration Where to Place the Switch The Switch is designed for positioning on the desktop. The exact placement will be based on the location of your CPUs and length of your cables. Cable Distance Requirements For PS/2 computers: VGA signals are best retained when transmitted up to eight feet. Beyond eight feet, probability of video degradation increases with an increase in distance. For this reason, your PS/2 computer should be placed within eight feet of the KVM Switch. Note: If your computer needs to be more than eight feet from the KVM Switch, you can use the Belkin CAT5 Extender (part number F1D084) to extend your PS/2 keyboard, PS/2 mouse, and monitor up to 500 feet (152.4m) away using a standard CAT5 UTP cable. Cautions and Warnings Avoid placing cables near fluorescent lights, air conditioning equipment, or machines that create electrical noise (e.g., vacuum cleaners). 6 INSTALLATION Step-by-Step Installation Guide This section provides complete instructions for the hardware setup of a single Switch. Important Note Before attempting to connect anything to the Switch or to any computer, make sure that everything is powered off. Plugging and unplugging cables while computers are powered on can cause irreversible damage to your computers, data, and/or to the Switch. Belkin Corporation will not be responsible for damage caused in this way. Connecting the Console 1. Power down all computers. 2. Connect your PS/2-type keyboard and mouse to the purple keyboard and green mouse ports located on the front panel of your Switch. 3. Take the video cable that is attached to your monitor and connect it to the VGA port on the front panel of your Switch. 4. Connect your speaker cable to the green speaker jack on the front panel of your Switch. 5. Connect your mic cable to the pink mic jack on the front panel of your Switch. 7 INSTALLATION Connecting Computers to the Switch 1. Using the attached cables, take the VGA cable and connect it to the VGA port on the first computer. 2. Connect the PS/2 keyboard KVM cable to the keyboard port on the computer. 3. Connect the PS/2 mouse KVM cable to the mouse port on the computer. 4. Connect the green speaker KVM cable to the speaker jack on the computer. 5. Connect the pink mic KVM cable to the mic jack on the computer. 6. Repeat steps 1 through 5 for the additional computer to be connected to the Switch. 8 USING YOUR SWITCH Powering Up the Systems Once all cables have been connected, power up your CPUs that are attached to the Switch. All computers can be powered on simultaneously. The Switch emulates a mouse and keyboard on each port and will allow your computer to boot normally. Your Switch should now be ready for use. You can select which computer to operate through hot key commands. Note that it will take 1-2 seconds for the video to display after switching. This is due to the refresh of the video signal. A re-synchronization of the mouse and keyboard signal also takes place. This is normal operation and ensures that proper synchronization is established. You can conveniently change ports on the Switch through a keyboard command sequence using the "SCROLL LOCK" key and up and down arrow keys. To send commands to the Switch, press the "SCROLL LOCK" key twice within two seconds. Then you can press the up or down arrow keys to switch between ports. Switch to next active port, up arrow 9 Switch to previous active port, down arrow USING YOUR SWITCH You can switch directly to any port by entering the Switch port number you wish to use. For example, if you press "SCROLL LOCK", "SCROLL LOCK", "2", the computer on port 2 will be selected. + AutoScan Mode + Switch to Port 2--(2) In AutoScan mode, the Switch remains on one port for eight seconds before switching to the next. This time interval cannot be changed. To enable AutoScan mode, press "SCROLL LOCK", "SCROLL LOCK", "S". Note: There is no mouse or keyboard control in this mode by design, in order to prevent errors. If it were enabled, the user could move the mouse or use the keyboard while the KVM Switch is switching to the next port. This could interrupt communication between the computer and Switch that might cause erratic mouse movement, or result in errant display of characters when using the keyboard. To disable AutoScan mode, press the space bar. 10 FAQs Q: What operating system does the Switch support? A: The Switch will support any operating system that runs on a PS/2 platform. It will also work with SunTM and Mac® operating systems using the appropriate adapters (Belkin OmniViewTM Sun Adapter F1D082, OmniView Mac Adapter F1D080). Operating systems include, but are not limited to, DOS, Windows 95, 98, 2000, Me, NT, XP, Linux, and Novell NetWare 4.x/5.x. Q: Does the Switch function with the Microsoft IntelliMouse®? A: Yes, the Switch will function with Microsoft, Logitech, Kensington, as well as with all Belkin mice. The Switch will support only two mouse buttons. Please contact Belkin Technical Support for any compatibility questions you may have. Q: How does the Switch allow the user to toggle between ports? A: The user can choose computers using specially designated hot keys from the keyboard. Q: How far can the user be from the Switch? A: When using PS/2 connections, the Switch can be up to eight feet away from your computer. If your computer needs to be more than eight feet from the KVM Switch, you can use the Belkin CAT5 Extender (part number F1D084) to extend the operation distance of your PS/2 keyboard, PS/2 mouse, and monitor up to 500 feet away using standard CAT5 UTP cable. 11 FAQs Q: What is the maximum video resolution the Switch supports? A: The advanced video circuit in the Switch supports a maximum resolution of 2048x1536@65Hz. This higher resolution support is ideal for graphic artists and designers who depend on high-quality video. Q: What is the difference between the 2-Port KVM Switch with Audio Support and Built-In Cabling and the SOHO Series KVM Switch? A: The SOHO Series KVM Switch offers a sculpted, space-saving design; cable management; flash-upgrade capability; and a USB option. Q: What are the benefits of the Belkin 2-Port KVM Switch with Audio Support and Built-In Cabling over a similar competitor product? A: The Belkin 2-Port KVM Switch with Audio Support and Built-In Cabling is an affordable solution, packed with features usually found in higher-priced units. It offers hot key command switching, resolution support of up to 2048x1536@65Hz, AutoScan, and a Belkin Three-Year Limited Warranty--all at a very affordable price. Q: Can I use the Switch on my Sun computer? A: Yes, the Switch works with Sun computers when used with the Belkin Sun Adapter, part number F1D082. 12 FAQs Q: Do I have to install any software to use the Switch? A: No, the Switch does not require any drivers or software to be installed on your computers. Simply connect all your computers to the PC ports on the Switch, then attach one monitor, mouse, and keyboard to the corresponding console ports and your Switch is ready for use. Q: Does the Switch require an AC adapter? A: No, the Switch is powered by the PS/2 ports of your computer. Q: Can I use the Switch to switch video signals only? A: No, you cannot use the Switch to switch between video signals only. The Switch requires power from the PS/2 ports in order to operate. Q: How long is the warranty for the Switch? A: The Switch comes with a Three-Year Limited Warranty. 13 TROUBLESHOOTING Video I am getting ghosting, shadowing, or fuzzy images on my monitor. · Check that all video cables are inserted properly. · Check that the monitor you are using supports the resolution and refresh-rate setting on your computer. · Check that the graphics card you are using supports the resolution and refresh-rate setting on your computer. · Connect the monitor directly into the computer you are having trouble with to see if the problem ...