User manual BELKIN F5C791-C8

Notebook Travel Surge Protector Thank you for choosing the Belkin Notebook Travel Surge Protector (the Travel Surge Protector) for your mobile computer power protection needs. Your Notebook Travel Surge Protector safeguards your laptop from power imbalances as you travel, in both domestic and international venues. Please read the general instructions and safety information provided below for both Notebook Travel Surge Protector models: F5C791-C6 and F5C791-C8. File in a safe place for future reference. Over-Current Detection Test (Fig. A) 1. Pull one end from the retractable 7 ft. phone cable and plug it into the telephone wall jack. Take the other end and plug it into the Travel Surge Protector jack marked with the icon. 2. Depress the test button. If red indicator light turns on, an over-current exists and may damage your modem device or cause a malfunction. IMPORTANT: IF THE RED LIGHT IS ON, DO NOT PLUG EQUIPMENT INTO THIS JACK. Seek a different phone jack or retest the same jack at a later time. If the red light remains off, the line is OK and ready for safe use. AC Line Installation (Fig. B) Please verify that your laptop and telephone line are functioning properly before you install the Travel Surge Protector. It easily connects in-line between the laptop power adapter and the adapter power cord. 1. Unplug the power cord from the power adapter. 2. Plug power adapter cord into the female end of the Travel Surge Protector. 3. Plug the male end of the Travel Surge Protector cord into the power adapter. Telephone/Modem Installation (Fig. C) 1. Plug one end of the phone cable into the telephone wall jack and the other end into the Travel Surge Protector jack marked with the icon. 2. Plug the cord from the telephone into the Travel Surge Protector jack marked with the icon. 3. Pull one end from the retractable 7 ft. phone cable and plug into the Travel Surge Protector jack marked with the icon and plug the other end into your laptop. The "Protected" light should be illuminated during use. If this light goes out at any time while in use, your Travel Surge Protector has sacrificed itself to protect your equipment and should be replaced. Please contact Belkin Corporation for a free replacement Travel Surge Protector. Safety Information This unit is designed for use in countries with 100VAC­240VAC electrical utilities. Use in some countries may require a plug adapter. Not for use with telephone ISDN or digital telephone lines. Prior to installing unit, turn off and unplug all intended protected equipment. For use in dry environments only. For absolute protection, do not use ELECTRIC equipment during an electrical storm. Plug Type C6 Connector UL Suppressed Voltage Rating LN Surge Entry Capacity @ 8/20uS Phone Protection Peak Surge Current @ 8/20uS Telephone Breakover Voltage Over-Current Detection Indicator Phone Cable Agency Approvals Warranty Connected Warranty *C6 Connector 3-Prong, C8 Connector 2-Prong Specifications C6 Connector or C8 Connector* 100VAC--240VAC AC 50/60Hz <800 Volts at 220VAC--240VAC 238 Joules at 220VAC--240VAC Solid State Phone Protection 6500 Amps 275VAC Yes Includes 7' Retractable RJ11 Cable UL, cUL and FCC Lifetime Product Warranty $75,000 Life 1. Plug phone cord into wall jack. 3. Plug the Travel Surge Protector's cord into the power adapter. 1. Plug the phone cord into the wall jack. 3. Plug the computer modem cable into the Travel Surge Protector. test 2. Depress test button indicator to test. 1. Unplug the power cord from the power adapter. 2. Plug power cord into the male end of the Travel Surge Protector. 2. Plug the telephone cord into the Travel Surge Protector. Figure A Figure B Figure C