Table of Contents 1. 2. Safety Guidelines: ------------------------------------------------------------------------------------- 1 Before Use:-------------------------------------------------------------------------------------------- 2 2.1 2.2 3. 4. 5. 6. Open the Package Installation Safety -------------------------------------------------------------------------------------------------- 3 Product Features -------------------------------------------------------------------------------------- 9 Standard Components-------------------------------------------------------------------------------- 10 Names and Functions of Parts: --------------------------------------------------------------------- 11 6.1 6.2 6.3 6.4 Side View Front View Rear View Remote Controller PC Module PC Module + Video Module PC Module + Enhanced PC Module Connection to External Laud Speakers Power ON/OFF Selection of Input Mode OSD Option Adjustment Sound Adjustment Zooming of the Screen Other Functions OSD Functions 7. Connection to External Equipment----------------------------------------------------------------- 20 7.1 7.2 7.3 7.4 8. Basic Operation--------------------------------------------------------------------------------------- 24 8.1 8.2 8.3 8.4 8.5 8.6 8.7 9. Optional Accessories--------------------------------------------------------------------------------- 33 10. Specifications ----------------------------------------------------------------------------------------- 34 11. Factory Settings--------------------------------------------------------------------------------------- 34 12. Cleaning and Simple Troubleshooting------------------------------------------------------------- 36 i 1. Safety Guidelines: Caution: Use a power cable is properly grounded. Always use the AC cords listed below for each area: USA ........................ UL Canada....................... CSA Germany.....................VDE Britain........................BASEC/BS Japan.........................Electric Appliance Control Act FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause unacceptable interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help FCC Warning To assure continued FCC compliance, the user must use the provided grounded power supply cord and the provided shielded video interface cables to connect to this equipment. Also, any unauthorized changes or modifications to this equipment would void the user's authority to operate this device. 1 2. Before Use: The product is a 46" WVGA (wide-screen with VGA resolution) Plasma Display with the features of super thinness, high quality, flat display and non-radiation. It has passed the Class-B EMC test and the UL and CSA safety certifications, and is an ideal product for individual users and commercial exhibitioners. The product is a precise electronic product. Users shall read the following instructions carefully to bring the performance of the product into full play: 2.1 Open the Package: The product is packaged in a carton together containing a host and other standard accessories. The optional accessories are packed separately in another carton. The weight of the host is about 37 kg. Since the size of the host is big, it is recommend moving it by two persons. The protective glass and the glass substrate are installed on the front of the product. Since both glasses are broken and scraped easily, move then gently. Don't put the glasses with their faces downward without protecting them with pads. When opening the carton, check whether the product is in good condition and all the parts and components are packed without shortage. Whenever possible, use the handles on the back of the Display for transport. 2.2 Installation: Read the User Manual carefully before conducting the installation. The power of the product is about 340~350W, somewhat higher than ordinary TV sets. Use the jack exclusively designed for the product. When an extended line is required, consult with your service agent to select an extended line with higher power to avoid any risk. The product shall be installed on a flat ground to avoid declining. The distance between the back of the product and the wall shall be maintained for proper ventilation. Don't install the product in kitchen, bathroom and other places with higher smoke, humidity or dust to so as not to shorten the service life of the electronic components. Please ensure the product be installed horizontally, any 90° clockwise or counterclockwise installation may induce poor ventilation and components damage should be avoided. To protect the screen and elongate the usage life, do not hold on a static picture for a long time. In order to get the best warranty, the product must be installed by specific technician from distributor or authorized agent. 2 3. Safety: Safety of operators is taken into consideration at the phrase of design and manufacturing, but inappropriate operation may cause electric shock or fire. To prevent the product from being damaged, the following rules shall be observed for the installation, use and maintenance of the product. Read the following safety instructions before starting the operation. The User Manual uses the following symbols to ensure a safe operation and prevent any damage to operators or properties: WARNING--- Ignorance or inappropriate use may cause damage or vital errors to operators. ATTENTION--- Ignorance or inappropriate use may cause injury or material damage. Examples: Prohibition Warning (Attention) symbol (indicating "Electric Shock"). WARNING Don't install the product on an unstable ground: Don't install the product on an swinging or declining ground; Otherwise it may drop and cause damage. Only the marked power source can be used for the product: The power source other than the marked one may cause fire or electric shock. 3 Keep the product away from moisture: * Don't install the product close to water. * When the product is used close to windows or outdoors, keep it away from water. * When water penetrates into the product, stop the operation; unplug the connector and contact with your dealer. Continuous use in this case may cause fire or electric shock. WARNING Don't put water containers or small metal objects on the top of the product: * Don't put any water-injected cups, small potted plants, cosmetics, medicine liquid, small containers, or metal objects on the top of the product. The spoiled water may cause short circuit, fire or electric shock when it penetrates into the housing of the product. Don't damage the power cable: Don't damage or change the power cable. Heavy objects, heat or tensile force may damage the power cable and cause fire or electric shock. Don't change or open the back cover: Changing the product may cause fire or electric shock. Don't remove the back cover of the product to avoid possible electric shock. Contact the manufacturer when inspection or adjustment is required. Don't use the product when any abnormality occurs: Continuous use of the product in the case of smoking or odor spreading may cause fire or electric shock. Unplug the connector and contact the manufacturer immediately. Don't try to repair the product by yourself to avoid any risk. 4 WARNING Don't drop or damage the housing: In the case the product is dropped and the housing is damaged, the internal components may function abnormally. Unplug the connector immediately and contact the manufacturer for repair. Continuous use of the product may cause fire or electric shock. WARNING Don't touch the power jack during lightening: Don't touch the power jack during lightening to avoid electric shock. ATTENTION Don't install the product close to smoke or moisture: Fire or electric shock may be caused when the product is installed close to smoke or moisture. Don't installed the product in a place with heavy dust or high humidity: Fire or electric shock may be caused when the product is installed in a place with heavy dust or high humidity. Instructions about moving the product: Make sure that the power connector and other plugs are all unplugged before moving the product. The product shall be moved by at least two persons. 5 The power cable shall be kept away from heat sources: The heat produced by any heat source may fuse the covering of the power cable. Hold the power connector when remove the power cable: Pulling the power cable may damage the wires inside the cable and cause fire or electric shock. Unplug the connector Don't touch the connector with wet hands: Electric shock may be caused in this case. ATTENTION Insert batteries instructions: in accordance with Insert the batteries with correct polarities (positive + and negative -). Incorrect polarities may case breakage and leakage of the batteries, hurt operators and contaminate the remote controller. Don't charge the batteries attached with the product to avoid any risk. Don't put any object on the vents: Blocking the vents may raise the internal temperature and make the housing hot or cause fire. Touching the hot housing may hurt operators. Don't install the product in a place with narrow space or bad ventilation. Don't cover the vents with towels, blankets or dusters. When the product is unused for a long time: Unplug the power connector and other plugs when the product will not be used for a long time. Unplug the connector 6 3.1 Read all safety instructions and the User Manual before using the product. 3.2 The safety instructions and User Manual shall be maintained in good condition for future use. 3.3 Special attention shall be paid to the warnings on the User Manual. 3.4 The User Manual shall be observed when using the product. 3.5 Unplug the power connector before cleaning the product. A wet cloth is sufficient for the cleaning of the product and don't use liquid or spraying cleaner for cleaning purpose. 3.6 Use the accessories recommended by the manufacturer to avoid any risk. 3.7 Keep the product away from any water source. When moving the product from lower temperature to high temperature environments, drops of water may condense on the housing. Don't turn on the Display immediately so as not to cause fire, electric shock or other risks. 3.8 Don't install the product on unstable wagons, racks or tables to avoid falling, hurt or material damage. The installation of the product shall be conducted in accordance with the instructions of the manufacturer and by using the support recommended by the manufacturer. 3.9 When installing the product on a wagon, emergency stop or forceful push of the wagon is prohibited. It is also not allowed to drive the wagon through an uneven ground to avoid falling, hurt or material damage. 3.10 The openings on the back of the product provide a ventilation function and can ensure the reliability of the operation from being affected by overheats. The vents shall not be blocked or closed, especially when the product is installed on your bed, sofa, blanket or other similar surfaces. Expect for a good ventilation condition is available, don't installed the product in an embedded rack or bookcase. The installation shall be conducted in accordance with the instructions of the manufacturer. To ensure good ventilation, a distance of more than 10cm shall be maintained between the Display and any other furniture. 3.11 Energize the product with the voltage specified on the power supply label. Contact your dealer or local power station when you don't know the voltage of your power source. 3.12 The three-wire power connector attached to the product shall only plug into the jack with a grounding terminal. When you encounter any difficult in the plugging of the power connector, contact electricity technicians for assistance and don't damage the ground terminal of the power connector. 3.13 The power cable shall be fixed along with its patch. Don't lead the power cable through the passageway or have it pressed by other objects. Special attention shall be paid to the wiring at the door and of the power connector and other plu ...