User manual BENQ FP783

FP783 LCD Color Monitor 17.0" (43.2 cm) LCD Panel Size User's Manual Welcome i Copyright Copyright © 2004 by BENQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BENQ Corporation. ii Disclaimer BENQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BENQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of BENQ Corporation to notify any person of such revision or changes. Please follow these safety instructions for best performance, and long life for your monitor iii Power Safety · The AC plug isolates this equipment from the AC supply. · The power supply cord serves as a power disconnect device for pluggable equipment. The socket outlet should be installed near the equipment and be easily accessible. · This product should be operated from the type of power indicated on the marked label. If you are not sure of the type of power available, consult your dealer or local power company. iv Care And Cleaning · Cleaning. Always unplug your monitor from the wall outlet before cleaning. Clean the LCD monitor surface with a lint-free, non-abrasive cloth. Avoid using any liquid, aerosol or glass cleaners. · Slots and openings on the back or top of the cabinet are for ventilation. They must not be blocked or covered. Your monitor should never be placed near or over a radiator or heat source, or in a built-in installation unless proper ventilation is provided. · Never push objects or spill liquid of any kind into this product. v Servicing · Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltages or other risks. If any of the above mentioned misuse or other accident such as dropping or mishandling occurs, contact qualified service personnel for servicing. 2 Copyright i Table of Contents Getting started ...................................................................................................................... 5 Getting to know your Monitor ............................................................................................ 7 Front View ...................................................................................................................7 Side View (1) ................................................................................................................7 Side View (2) ................................................................................................................8 Back View (1) ...............................................................................................................8 Back View (2): Locations of plugs & sockets ..............................................................9 How to install your monitor hardware ............................................................................. 10 Adjust the viewing angle ...........................................................................................12 How to install your monitor's software ............................................................................ 13 Choosing the best picture resolution ................................................................................. 40 How to choose the right Refresh Rate ............................................................................... 42 How to set the Picture Optimization ................................................................................ 45 How to adjust your Monitor .............................................................................................. 46 An Overview of the Control Panel ...........................................................................46 Hot Key Mode ...........................................................................................................46 Main Menu Mode ......................................................................................................47 Troubleshooting ................................................................................................................. 55 Frequently Asked Questions (FAQ) .........................................................................55 Need More Help? .......................................................................................................56 Supported operating modes ............................................................................................... 57 Specifications ...................................................................................................................... 58 Table of Contents 3 4 Table of Contents 1 Getting started When unpacking please check you have the following items. If they are missing or are damaged, please immediately contact the dealer at which you purchased the goods. BenQ LCD Monitor Quick Start Guide 7 7 CD-ROM Disk Power Cord Power Adapter USB Cable Getting started 5 Signal Cable: D-Sub Signal Cable: DVI-D (Optional) 6 Getting started 2 Getting to know your Monitor Front View Side View (1) Getting to know your Monitor 7 Side View (2) Back View (1) 8 Getting to know your Monitor Back View (2): Locations of plugs & sockets WebCam Plug-In DV12V Connector DVI-D Connector Power AC Input Jack D-Sub Connector USB Ports USB Connectors Getting to know your Monitor 9 3 How to install your monitor hardware Make sure that the computer and monitor's power are both turned off. 1. Pull the monitor screen forward to keep it upright. There will be a clicking sound. 2. Press the jutting edge to detach the back cover. 3. Connect the D-Sub cable (the end with no core attached) to the monitor. 10 How to install your monitor hardware 4. Connect the other end of the D-Sub cable to your computer. 5. Connect the USB cable from the monitor to your computer. 6. Connect one end of the DVI-D cable to the monitor and the other end to the signal connector of your computer. (Optional) 7. Connect the power cord to your monitor. How to install your monitor hardware 11 8. Collect cables in order and fix the back cover to the place. After connecting the power cord to an AC power socket, turn on your computer and press the Power button on the side panel of the monitor. The power indicator will light up to notify the status of power. Note: The USB port on the top panel of your monitor is specifically designed for plugging your WebCam in. If you wish to attach other USB devices, we recommend you to plug them into the USB ports on the side panel of the monitor. Adjust the viewing angle Your LCD monitor is designed to allow you to adjust it to an optimal viewing angle. 12 How to install your monitor hardware 4 How to install your monitor's software You need to set up the correct monitor driver to suit your operating system. To set up Windows 95, start on this page. Windows 98, turn to page 17. Windows 2000, turn to page 22. Windows ME, turn to page 29. Windows XP, turn to page 35. Windows 95. The first time you start Windows with a new monitor, the system will detect it and automatically install the driver for plug and play displays. To install the current driver from CD, proceed as follows: 1. Insert "BenQ LCD Monitor" CD-ROM into your CD-ROM Driver. 2. Click "Start" then "Settings". How to install your monitor's software 13 3. Double click the "Display" icon in the Control Panel. 4. From the "Display properties" window, select the "Settings" tab. Click the "Advanced..." button in the bottom right corner. 14 How to install your monitor's software 5. Select the "Monitor" tab. Click the "Change" button in the top right corner. How to install your monitor's software 15 6. Now click the "Have Disk" button in the bottom right corner. Another window appears. Select the "Browse" button. 7. Insert the supplied CD into your computer. Select the CD-drive from the drop-down menu. 8. In the field above the drive selection, change to the "Drivers" folder. The current driver files are located there. Press "OK" and the window closes. 16 How to install your monitor's software 9. By pressing "OK" again in the next window you will be given a list of compatible devices. Select "FP783" from the list and press "OK" again. 10. Now you are back to "Advanced Display Properties". Close this window by clicking "OK" and confirm the following messages with "Yes". Click "OK" and "Yes" again. The installation is now completed. You can close "Display Properties". Windows 98. To manually install or update the driver, perform the following steps: How to install your monitor's software 17 1. Open the control panel and double-click "Display" icon. 2. From the "Display Properties" window, select the "Settings" tab. Click the "Advanced..." button in the bottom right corner. 18 How to install your monitor's software 3. Select the "Monitor" tab. Click the "Change" button in the top right corner. 4. The "Update Device Driver Wizard" opens. Confirm by clicking "Next". How to install your monitor's software 19 5. Select "Display a list of all drivers in a specific location, so you can select the driver you want." and press "Next". 6. Now click the "Have Disk" button in the bottom right corner. Another window appears. Select the "Browse" button. 20 How to install your monitor's software 7. Insert the supplied CD into your computer. Select the CD-drive from the drop-down menu. 8. By pressing "OK" again in the next window you will be given a list of compatible devices. Select "FP783" from the list and press "Next" again. How to install your monitor's software 21 9. An "Insert Disk" dialogue box appears. Click "OK", and then click "Skip File". 10. Close "Update Device Driver Wizard" by clicking "Finish" to complete the installation. Windows 2000. The first time you start Windows with a new monitor, the system will detect it and automatically start the "Add New Hardware Wizard". Carry out the instructions beginning at step 4. 1. Insert "BenQ LCD Monitor" CD-ROM into your CD-ROM Driver. 22 How to install your monitor's software 2. Click "Start" then "Settings". 3. Open the Control Panel and double click on the "Display" icon. How to install your monitor's software 23 4. From the "Display Properties" window, select the "Settings" tab. Click the "Advanced Properties" button in the bottom right corner. 24 How to install your monitor's software 5. Select "Monitor" then click "Properties". How to install your monitor's software 25 6. Select "Driver" tab then click "Update Driver". 7. The "Upgrade Device Driver Wizard" will pop up. Then click "Next". 26 How to install your monitor's software 8. Select "Display a list of the known drivers for this device so that I can choose a specific driver" then click "Next". 9. In the next window, click "Have Disk", then "Install From Disk" window will pop up. Click "Browse", the "Located File" will pop up. How to install your monitor's software 27 10. Scroll down and select your CD ROM Driver, then click "Next" . 28 How to install your monitor's software 11. In the list of folders within the CD-ROM, select "Drivers" folder then click "Open" twice, then click "OK". Select your LCD Mode (FP783) from the list in the next window then click "Next" twice. 12. The new drivers are now installed on your computer. Windows ME. To manually install or update the driver, perform the following steps: 1. Click "Start", "Settings", "Control Panel" and then double-click "Display". 2. In the Display Properties window, click the "Settings" tab and click "Advanced...". How to install your monitor's software 29 3. Click the "Monitor" tab and then click "Change". 4. "Update Device Driver Wizard" dialogue box appears. Choose "Specify the location of the driver (Advanced)" and then click "Next". 30 How to install your monitor's software 5. Choose "Display a list of all the drivers in a specific location, so you can select the driver you want" and click "Next". 6. Choose "Monitor" from the list and then click "Next". How to install your monitor's software 31 7. Choose "Display a list of all the drivers in a specific location, so you can select the driver you want.". 8. Click "Have disk" and then click "Browse...". 32 How to install your monitor's software 9. Insert "BenQ LCD Monitor's CD" into your CD-ROM and type d:\ (change the driver letter to match your CD-ROM driver if it is not drive D). Enter "Drivers" folder to select the model from the list left. Click "OK". How to install your monitor's software 33 10. Click "OK" on the "Install From Disk" window. The dialogue box "Update Device Driver Wizard" appears. Choose the model from the list, then click "Next". 11. Click "Next". 34 How to install your monitor's software 12. Click "Finish" to complete the installation. Windows XP. 1. Right click mouse on the desktop and choose "Properties". Select "Settings" tab and click the "Advanced" button. A small window will pop up. Select the "Monitor" tab in the new window and then click "Properties". How to install your monitor's software 35 2. Select "Driver" tab and then click "Update Driver..." 3. The "Hardware Update Wizard" will pop up. Then click "Next". 36 How to install your monitor's software 4. Select "Don't search. I will choose the driver to install" and then click "Next". How to install your monitor's software 37 5. In the next window, click "Have Disk...", an "Install From Disk" window will pop up. Click "Browse". The "Locate File" window will pop up. 38 How to install your monitor's software 6. Select your driver and then click "Next". 7. The new drivers are now installed to your computer. Click "Finish" to exit installation. How to install your monitor's software 39 5 Choosing the best picture resolution Due to the nature of LC display technology, the picture resolution is always fixed. The best picture possible for your FP783 is achieved with a resolution of 1280x1024. This is called "Native Resolution" or maximal resolution - that is, the clearest picture. Lower resolutions are displayed on a full screen through an interpolation circuit. However flaws do occur with the interpolated resolution. So if you want to have all the advantages of LCD technology you must use the native resolution. If you are using Windows 95/98/2000/ME or XP you can change the picture resolution as follows: 1. Double-click the "Display" icon in the Control Panel. 2. From the "Display Properties" window, select the "Settings" tab. You can alter the resolution by using the slider on the right-hand side. 40 Choosing the best picture resolution 3. Select a resolution of 1280x1024. Then click "Apply". 4. In the subsequent windows, press "OK" and "Yes" 5. You can now close "Display Properties". Choosing the best picture resolution 41 6 How to choose the right Refresh Rate You don't have to choose the highest possible refresh rate on an LCD display, because it is not technically possible for an LCD display to flicker. The best results are obtained by using the factory modes already set in your computer. There is a table with the factory modes in this user's guide. Youc an choose 60, 70 and 75 Hertz, (but not 72Hz) for the native resolution of 1280x1024. In Windows 95/98/2000/ME/XP you can change the refresh rate as follows: 1. Double click the "Display" icon in the Control Panel. 42 How to choose the right Refresh Rate 2. From the "Display Properties" window, select the "Settings" tab. Click the "Advanced..." button in the bottom right corner. How to choose the right Refresh Rate 43 3. Select the "Adapter" tab. The refresh rate selection field is located in the center at the bottom of the window. 4. Choose a refresh rate from the table with the factory modes, which can be found in the user's guide, and select this in the settings field. 5. In the subsequent windows press "Change", "OK" and "Yes". 6. You can now close "Display Properties". 44 How to choose the right Refresh Rate 7 How to set the Picture Optimization The easiest way to obtain an optimal display is to use the ikey function. Press the "ikey" on the control panel and the monitor will adjust automatically. If you are still not satisfied with the result, you can still adjust the image manually. 1. Run the test program auto.exe from CD-ROM; this is the best way to observe possible changes. You can also use any other image, such as the desktop of your operating system. However, we recommend that you use auto.exe. As you run auto.exe, a test pattern emerges. 2. Press "Enter" on control panel to access OSD. 3. If there is vertical noise observed, press t or u key to select "Geometry" and press "Enter" key. Then press t or u key to select "Pixel Clock" and also press "Enter" key again. Now, press t or u key to adjust the monitor untill the noise disappears. 4. If there is horizontal noise observed, press t or u key to select "Geometry" and press "Enter" key. Then press t or u key to select "Phase" and also press "Enter" key again. Now, press t or u to adjust the monitor untill the noise disappears. To make sure the "iKey" function performs well, you have to use one of the supported modes. If the "iKey" does not work properly and the "NON PRESET MODE" message is on the OSD, it means you are not using one of the supported modes. Please set your computer to use one of the supported modes. You will find a list of supported modes in this manual. How to set the Picture Optimization 45 8 How to adjust your Monitor An Overview of the Control Panel Power "Enter" Key "Up" Key "Down" Key "Exit" Key iKey There are 6 keys for user's control including "Enter", "Up" , "Down", "Exit", and "iKey" and a power switch. The following descriptions are the introduction of these keys & switch. 1. "Power": Turn the power on or off. 2. "Enter" key: Activate OSD, enter sub menu, select items, confirm selection and hot key for OSD Lock.. 3. 4. t (Up) key: For Up/Increase adjustment. Up key is the hot key for Brightness. u (Down) key: For Down/Decrease adjustment. Down key is the hot key for Contrast. 5. "Exit" key: Back to previous menu or exit OSD. 6. "iKey" : Adjust vertical position, phase, horizontal position and pixel clock automatically Hot Key Mode Brightness and Contrast hot keys Press t to enter Brightness menu, press t or u key to adjust the degree of brightness and press "Exit" to exit OSD. 46 How to adjust your Monitor Press u to enter Contrast menu, press t or u key to adjust the degree of Contrast and press "Exit" to exit OSD. Input Selection hot key Press "Exit" to enter the Input Select menu. Choose D-sub or DVI input source by pressing t or u key and save your choice with "Enter". Main Menu Mode Control Functions Available in Main Menu Main Menu Luminance sub menu How to adjust your Monitor 47 Press t or u key to adjust the degree of Brightness, press "Exit" to return to the previous menu. Press t or u key to adjust the degree of Contrast, press "Exit" to return to the previous menu. 48 How to adjust your Monitor Geometry sub menu Press t or u key to adjust the Horizontal Position, press "Exit" to return to previous menu. Press t or u key to adjust the Vertical Position, press "Exit" key to return to previous menu. Press t or u key to adjust the value of the Pixel Clock, press "Exit" to return to previous menu. Press t or u key to adjust the degree of Phase, press "Exit" to return to previous menu. How to adjust your Monitor 49 Color sub menu User Preset: User may set the color balance of Red, Green and Blue. 50 How to adjust your Monitor