USER'S GUIDE 5200 Series 220-240V Thanks 2 3 4 5 6 7-9 Consumer Services Safety Instructions Product View Features / Assembly Operation Clean-Up / Storage 9-10 Troubleshooting 10 Replacement Parts 11 About Your Warranty 12 ug603_6719_5200E_305.indd 1 1/16/08 2:07:37 PM Thanks for buying a BISSELL Flip-It TM We're glad you purchased a BISSELL Flip-It . Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your Flip-It is well made, and we back it with a limited two-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services Department, so, should you ever have a problem, you'll receive fast, considerate assistance. My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your Flip-It. Thanks again, from all of us at BISSELL. TM Mark J. Bissell President and Chief Executive Officer 2 ug603_6719_5200E_305.indd 2 1/16/08 2:07:38 PM Thanks for buying a BISSELL Flip-It TM For information about repairs or replacement parts, or questions about your warranty, call or write us as indicated below or contact your local in country distributor: For UK inquiries: Monday - Thursday 9 am -- 5 pm Friday 9 am -- 4 pm BISSELL Homecare (Overseas) Inc. The Boat Yard 105 Straight Road Old Windsor Berkshire, SL4 2SE United Kingdom Telephone: 0870-225-0109 For Australian inquiries: 24 hours a day, 7 days a week E.D. Oates Pty Ltd 76 - 82 Newlands Road Reservoir VIC 3073 Australia Telephone: 1-800-811-183 For all other inquiries: Monday - Friday 8 am -- 4 pm BISSELL Homecare, Inc. PO Box 1888 Grand Rapids Michigan 49501 USA Telephone: 01-616-453-4451 Fax: 01-616-453-1383 Or visit the BISSELL website - www.bissell.com When contacting BISSELL, have model number of unit available. Please record your Model Number: ___________________ Please record your Purchase Date: ___________________ NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the event of a warranty claim. See "About Your Warranty" on page 12 for details. 3 ug603_6719_5200E_305.indd 3 1/16/08 2:07:38 PM IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: Read all instructions before using your Flip-ItTM Always connect to a properly Earthed Outlet. Unplug from outlet when not in use and before conducting maintenance or troubleshooting. To reduce the risk of fire, electric shock or injury: Use indoors only . Do not leave FLIP-ITTM when it is plugged in. Do not service FLIP-ITTM when it is plugged in. Do not use with damaged cord or plug. Do not use FLIP-ITTM if it has been dropped, damaged, left outdoors or dropped into water, have it repaired at an Authorized Service Center. Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners or edges, run appliance over cord, or expose cord to heated surfaces. Do not carry the appliance while in use. Do not handle FLIP-ITTM plug or appliance with wet hands. Do not put any object into appliance openings, use with blocked opening, or restrict air flow. Do not expose hair, loose clothing, fingers or body parts to openings or moving parts. Do not pick up hot or burning objects. Do not pick up flammable or combustible materials (lighter fluid, petrol, kerosene, etc.) or use in the presence of explosive liquids or vapour. Do not use appliance in an enclosed space filled with vapours given off by oil base paint, paint thinner, some moth proofing substances, flammable dust, or other explosive or toxic vapours. Do not pick up toxic material (chlorine bleach, ammonia, drain cleaner, petrol, etc.). Do not allow to be used as a toy. Do not use for any purpose other than described in this User's Guide. Remove plug from electrical outlet before cleaning or maintaining the appliance. Do not unplug by pulling on cord. Unplug by grasping plug. Use only manufacturer's recommended attachments. Use only cleaning products formulated by BISSELL for use in this appliance to prevent internal component damage. See Cleaning Formula Section of the User's Guide. Keep openings free of dust, lint, hair, etc. Keep appliance on a level surface. Turn off all controls before unplugging. Do not unplug by pulling on cord. Unplug by grasping the plug, not the cord. Be extra careful when cleaning stairs. Do not use without Filter in place. Close attention is necessary when used by or near children Not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent in order to avoid a hazard. Do not expose to rain, store indoors. WARNING: SAVE THESE INSTRUCTIONS. THIS MODEL IS FOR HOUSEHOLD USE ONLY. This appliance must be Earthed. WARNING: IMPORTANT VOLT A.C. 50/60 Hz FOR OPERATION ON A 220-240 POWER SUPPLY ONLY. FOR RESIDENTS OF THE UNITED KINGDOM ONLY If your appliance is fitted with a nonrewireable BS 1363 plug it must not be used unless a 13 amp (ASTA approved to BS 1362) fuse is fitted in the carrier contained in the plug. (Spares may be obtained from your BISSELL supplier). If for any reason the plug is cut off, it must be disposed of, as it is an electric shock hazard should it be inserted into a 13 amp socket. 4 ug603_6719_5200E_305.indd 4 1/16/08 2:07:38 PM Product View Spray Trigger Cord Clip Quick Release Cord Wrap Carry Handle Power Cord On/Off Switch Clean Tank Pleated Filter Dirty Tank Removable Gentle CleanTM Brush & Pad Wet Vacuum Suction Path Removable Wet Cleaning Nozzle Dry Vacuum Suction Path Do not over wet the floor. Apply Formula by depressing the Spray Trigger on the forward stroke only and release the Spray Trigger on the rearward stroke. Over wetting the floor surface may cause delamination of certain laminated flooring materials. CAUTION: 5 ug603_6719_5200E_305.indd 5 1/16/08 2:07:38 PM Specialized Cleaning Features Included with the purchase of your Flip-It are the following Specialized Cleaning Accessories... The Flip-It was designed to give the user the ability to easily change between the Gentle CleanTM Brushes and Pads. TM 1. The Gentle Clean Brush is recommended for WARNING: Do not plug in your cleaner until you have completely assembled it per the following instructions and operating procedures. use on Hard Floor surfaces such as tile, vinyl, slate or surfaces that have grout or crevices where dirt and grime collect. WARNING: To reduce the risk of fire, 2. The Gentle CleanTM Pad is intended for use on more delicate surfaces such as sealed hardwood, laminates or vinyl. use only BISSELL Hard and Wood Floor Cleaning Solutions in your Flip-It. Use of cleaning formulas that contain lemon or pine oil may damage this appliance and void the warranty. Chemical spot cleaners or solvent based soil removers should not be used. These products may react with the plastic materials used in your Flip-It causing cracking or pitting. 3. The Pleated Filter, located in the lid of the Dirty Tank should be cleaned periodically. 1. Putting It Together Assembling your new BISSELL Flip-It is a simple 2 Step Process: NOTE: Remove Clean Tank from unit first. Insert the Handle into the top of the unit, making 1. sure the Spray Trigger is on the Wet Vacuum side. Make sure the screw opening in the Handle is aligned with the hole in the housing of the unit. 2. Insert screw; gently screw in until tight with the 2. body of the unit. 6 ug603_6719_5200E_305.indd 6 1/16/08 2:07:38 PM How To Use Your Flip-It Hard Floor Cleaner Getting Ready 1. Remove the Clean Tank from the machine. Tip: When using a Dry Gentle CleanTM Pad, you may want to get it slightly damp by squeezing the trigger to saturate the pad. This will aid in the flow of water and Formula to clean sticky grime and spots. 2. Unscrew the black Cap on the bottom of the Clean Tank and remove the Insert. 3. Filling the Clean Tank: Fill with BISSELL Formula to the Formula fill line and fill with water to the Water line. Replace the Insert and Cap Assembly. Place the full Tank back into the unit. Tip: Inserting The Gentle CleanTM Brush or Pad The first time you use your unit, the Gentle CleanTM Pad will be in the unit. Based on your flooring type and personal preference, you may want to change to the Gentle CleanTM Brush. Cleaning Formula Section Keep plenty of genuine BISSELL Hard and Wood Floor Cleaning Solutions on hand so you can clean when it fits your schedule. Always use genuine BISSELL cleaning formulas. When plugging the unit in, make sure to hook the power cord into the Cord Clip. This will help guide the power cord when you flip from Dry to Wet Cleaning. Tip: Use only specially formulated BISSELL Hard and Wood Floor Cleaning Solutions. Non-BISSELL cleaning formulas may harm the machine and void the warranty. WARNING: Fire and Electric Shock To Reduce the Risk of due to internal componet damage, use only BISSELL cleaning formula intended for use with the hard floor cleaner. 32 oz. 0482 32 oz. 0484 7 ug603_6719_5200E_305.indd 7 1/16/08 2:07:39 PM Dry Vacuuming With the Dry Vacuum Side of the unit facing forward, turn the unit on and begin cleaning. You will see dry dirt, crumbs and debris being collected in the Dirty Tank. You do not have to empty the dry debris before Wet Cleaning. Flipping from Dry to Wet Cleaning To change from Dry Vacuuming, to Wet Cleaning simply flip the unit around to the Wet Vacuum side! The Gentle CleanTM Brush or Pad and Squeegee will automatically be lowered to effectively clean and dry all your Hard Floor Surfaces. Tip: To extend the life of your Filter and to maintain maximum dry suction, check the Filter for lint and debris frequently. Wet Cleaning/Vacuuming To begin Wet Cleaning, simply pull the Spray Trigger. Water and Formula will be dispensed through the Gentle CleanTM Brush or Pad. Tip: To make sure water and Formula are flowing, squeeze the Spray Trigger without the Gentle CleanTM Brush or Pad inserted. You should see a light stream of water and Formula dispensed onto the floor. To maximize the area to be cleaned, it is recommended that the Spray Trigger is squeezed on the forward stroke and released on the rearward stroke. CAUTION:floor. Apply Do not over wet the Formula by depressing the Spray Trigger on the forward stroke only and release the Spray Trigger on the rearward stroke. Over wetting the floor surface may cause delamination of certain laminated flooring materials. This will dispense water and Formula going forward and on the pull back, the Squeegee will leave the floor essentially dry and ready to walk on. 8 ug603_6719_5200E_305.indd 8 1/16/08 2:07:40 PM Dirty Tank Is Full While Wet Cleaning, you will see dirty water collected in the Dirty Tank. When the Tank is full, the white Float in the Dirty Tank will rise to the top, making a noticeable sound to let you know it is time to empty the Dirty Tank. Tip: While using the Flip-It in the Wet Cleaning mode, make sure to listen for the change in the sound to alert you when the Dirty Tank is full. When You're Finished Emptying the Dirty Tank Remove the Dirty Tank Lid. Dump the dirty water and debris into the sink, toilet, laundry tub or outside. Rinse the Tank out with warm water and replace it in the unit. Tip: If there are large pieces of debris in the water, you may not want to empty the Tank into your sink. Checking The Filter While the Dirty Tank is out of the unit, remove the Pleated Filter from the top of the Tank. Remove dirt and debris from the pleats by gently tapping the Filter over the wastebasket or outside. The Pleated Filter can also be rinsed under water to clean. NOTE: If the Pleated Filter is rinsed with warm water to clean, it is recommended to leave it out of the unit to air dry before placing it back in the unit. WARNING: To reduce the risk of fire, electric shock or injury unplug from outlet before servicing. Cleaning The Gentle CleanTM Brush or Pad Gentle CleanTM Brush Remove the Gentle Clean Brush from the unit and rinse under warm water. Gentle CleanTM Pad Remove the Gentle Clean Pad Card from the unit. Peel the Pad from the Pad Card and toss in the wash! Removing Wet Cleaning Nozzle Remove the Wet Cleaning Nozzle by pulling tab on right side of Nozzle. Rinse any dirt and grime off the Nozzle under warm tap water. To replace the Wet Cleaning Nozzle, insert the 4 tabs along the bottom of the Nozzle Window first and gently snap the Wet Cleaning Nozzle back into place. 9 ug603_6719_5200E_305.indd 9 1/16/08 2:07:40 PM Storing The Flip-It Your Flip-It can be stored Ready-to-Use, by leaving water and Formula in the unit. Be sure to remove wet Gentle CleanTM Pad befo ...