User manual BLAUPUNKT ACAPULCO MP52

Radio / CD Acapulco MP52 US version Operating instructions http://www.blaupunkt.com Open here Ouvrir s.v.p. Por favor, abrir Favor abrir 2 1 2 3 4 16 15 5 6 14 7 8 9 13 12 11 10 3 PORTUGUÊS ESPAÑOL FRANÇAIS ENGLISH CONTROLS 1 2 3 4 button - unlatches the flip/ release panel Volume control Button - switches the radio and mute function on/off RDS button, to switch the RDS function on/off (Radio Data System). FM button, to select the FM radio mode source and select the FM memory banks TS, to start the Travelstore function Display (display field) DIS, change display contents button - indicates the time on the display MENU button - selects the menu for basic settings 9 : ; < = button - opens the flip/release panel Arrow-key block OK button - confirms menu entries and starts the scan function DEQ button (digital equalizer) switches the equalizer on/off AUDIO button - adjusts bass, treble, X-BASS, balance and fader Key block 1 - 6 AM button, to select the AM radio mode source and select the AM memory banks SRC button - selects between CD, MP3, CD changer/Compact Drive MP3 (if connected) and AUX sources 5 > ? 6 7 @ 8 4 TABLE OF CONTENTS Notes and accessories ............... 6 Flip/release panel ....................... 7 Switching on/off ......................... 8 Volume adjustment ..................... 9 Radio mode ............................... 10 Setting the tuner ............................... 10 Switching to radio mode ................... 11 Switching the RDS function on/off .... 11 Selecting the waveband / memory bank ................................... 11 Tuning into a station .......................... 11 Setting the sensitivity of station seek tuning ....................................... 11 Storing stations ................................ 12 Storing stations automatically (Travelstore) ..................................... 12 Listening to stored stations ............... 12 Scanning receivable stations (SCAN) .. 12 Setting the scantime ......................... 12 Programme type (PTY) ..................... 13 Optimising radio reception ................ 13 Displaying scrolling text .................... 14 Setting the display ............................ 14 Preparing the MP3 CD ..................... 18 Switching to MP3 mode ................... 19 Selecting a directory ......................... 19 Selecting tracks ............................... 20 Fast searching (audible) ................... 20 Random track play (MIX) .................. 20 Scanning tracks (SCAN) .................. 20 Repeating individual tracks or whole directories (REPEAT) ............. 21 Pausing playback (PAUSE) ............... 21 Setting the display ............................ 21 ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS MP3 mode ................................. 18 CD changer mode ..................... 22 Starting CD changer mode ............... 22 Selecting a CD ................................. 22 Selecting a track .............................. 22 Fast search (audible) ........................ 22 Changing the display ........................ 22 Repeating individual tracks or whole CDs (REPEAT) ....................... 22 Random play (MIX) ........................... 22 Scanning all tracks on all CDs (SCAN).. 23 Interrupting Play (PAUSE) ................ 23 Naming CDs .................................... 23 CD Mode ................................... 15 Starting CD mode ............................ 15 Selecting a track .............................. 15 Quick track selection ........................ 15 Fast search (audible) ........................ 15 Random play (MIX) ........................... 16 Scanning tracks (SCAN) .................. 16 Repeating a track (REPEAT) ............. 16 Interrupting play (PAUSE) ................. 16 Changing the display ........................ 16 Naming CDs .................................... 17 Displaying CD text ............................ 17 Removing a CD ................................ 18 CLOCK - Time ........................... 24 Tone and volume balance ......... 25 Equalizer ................................... 27 Notes on adjusting the equalizer ....... 27 Switching the equalizer on/off ........... 27 Setting the equalizer ......................... 27 Selecting sound presets ................... 28 Selecting car presets ....................... 28 Setting the level indicator .................. 28 Setting aid for the equalizer .............. 29 External audio sources ............. 30 Technical data ........................... 30 Installation instructions ........... 117 5 NOTES AND ACCESSORIES Notes and accessories Thank you for deciding to use a Blaupunkt product. We hope you enjoy using this new piece of equipment. Please read these operating instructions before using the equipment for the first time. The Blaupunkt editors are constantly working on making the operating instructions clearer and easier to understand. However, if you still have any questions on how to operate the equipment, please contact your dealer or the telephone hotline for your country. You will find the telephone numbers printed at the back of this booklet. We provide a manufacturer guarantee for our products bought within the European Union. You can view the guarantee conditions at www.blaupunkt.de or ask for them directly at: Blaupunkt GmbH Hotline Robert Bosch Str. 200 D-31139 Hildesheim Road safety Road safety has priority. Only operate your car radio if road and traffic conditions allow. Familiarise yourself with the unit before setting off on your journey. You should always be able to hear police, fire and ambulance sirens in good time. For this reason, set the volume of your car radio at a suitable level. Installation If you would like to install your car radio yourself, please read the installation and connection instructions at the end of the manual. Accessories Please use only Blaupunkt-approved accessories. Remote controls The most important functions of your car radio can be selected safely and conveniently from the steering wheel using the remote controls RC 08, RC 10 or RC 10H (available as an optional extra). The radio cannot be switched on/off via remote control. Amplifiers All Blaupunkt amplifiers are suitable for use with the radio. 6 NOTES AND ACCESSORIES CD changer The following Blaupunkt CD changers can be connected to the radio: CDC A 02, CDC A 08 and IDC A 09. Compact Drive MP3 As an alternative to a CD changer, you can connect a Compact Drive MP3 to access MP3 music tracks. If you connect a Compact Drive MP3, you will first need to use a computer to store the MP3 music tracks on the MicrodriveTM hard disk inside the Compact Drive MP3. Then, when the Compact Drive MP3 is connected to the car radio, you can play the tracks like normal CD music tracks. The Compact Drive MP3 is operated in the same way as a CD changer. Most of the CD changer functions can also be used with the Compact Drive MP3. Amplifier / sub-out The car radio provides connections for connecting external amplifiers and a subwoofer. We recommend you use well-matched products from the Blaupunkt or Velocity product ranges. FLIP/RELEASE PANEL Theft protection Your car radio is fitted with a flip/release panel to guard against theft. Without this panel, the unit is worthless to the thief. Protect your unit from theft by taking the flip/release panel with you every time you leave the car. Do not leave the panel behind in the car, even if it is out of sight. The constructive design of the panel makes for simple handling. Note: Do not drop the flip/release panel. Do not expose the flip/release panel to direct sunshine or other sources of heat. Keep the flip/release panel in the case provided. Avoid direct skin contact with the flip/release panel. Please clean it when necessary with some white spirit on a lint-free cloth. ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Flip/release panel Removing the flip/release panel 1 7 FLIP/RELEASE PANEL Press the button 1. This unlatches the flip/release panel. SWITCHING ON/OFF Switching on/off There are various ways of switching the car radio on and off, as described below. Switching on/off using the ignition If the car radio is correctly connected to the ignition and has not been switched off using the button 3, it is switched on/off simultaneously with the ignition. You can also switch on your car radio when the vehicle ignition is off. First pull the flip/release panel straight and then to the left out of the unit. After removing the flip/release panel, the unit switches itself off. All the current settings are saved. If there is a CD in the unit, it remains there. Attaching the flip/release panel Slide the flip/release panel from left to right into the unit guide. To do so, press the button 3. Note: To protect the vehicle battery, the unit switches off automatically after one hour. Switching on/off using the flip/ release panel Press the left side of the panel into the unit until it slots into place. Remove the flip/release panel. The unit switches itself off. Replace the flip/release panel once Note: Do not press against the display while attaching the flip/release panel. If the device was still switched on when you removed the control panel, it will automatically switch on again with the last settings activated (i.e. radio, CD, CD changer/Compact Drive MP3 or AUX) when the panel is replaced. more. The car radio is switched on. The last settings (radio, CD, CD changer/Compact Drive MP3 or AUX) are activated. Switching on/off using the button 3 To switch the unit on, press the button 3. To switch the unit off, hold the button 3 down for more than two seconds. The car radio is now switched off. 8 VOLUME ADJUSTMENT The system volume can be adjusted in steps from 0 (off) to 66 (maximum). This feature enables you to lower the system volume instantaneously (mute). ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Volume adjustment Mute setting To raise the system volume, turn the volume control 2 to the right. Briefly press button 3. "MUTE" appears on the display. To lower the system volume, turn the volume control 2 to the left. Telephone Audio/Navigation Audio If your car radio is connected to a mobile telephone or a navigation system, the volume will be muted as soon as you "pick up" the telephone or the radio relays voice output from the navigation system and the conversation or voice output is heard through the radio's loudspeakers. In order for this to work, the mobile telephone or navigation system has to be connected to the car radio as described in the instructions. For this, you need adapter cable Blaupunkt no. 7 607 001 503. To find out which navigation systems are compatible with your car radio, please consult your Blaupunkt dealer. The volume at which telephone conversations and voice output from the navigation system are switched on is adjustable. Setting the switch-on volume You can set the volume at which you wish the car radio to play when switched on. Press the MENU button 8. Press the or button : repeatedly until "ON VOLUME" appears on the display. buttons : to set the switch-on volume. If you select "LAST VOL", the volume played before the unit was last switched off will be reactivated. Use the Note: To protect your hearing, the maximum switch-on volume under the "LAST VOL" setting is "38". If the volume was higher before the unit was switched off and "LAST VOL" has been selected, the volume will be set at "38" the next time the radio is switched on. When you have completed setting the volume, Press the MENU button 8. Press the button : repeatedly until "TEL/NAVI VOL" appears on the display. buttons : to set the desired volume. tings, press either the MENU button 8 or OK ;. 9 Use the press the MENU button 8 or OK ;. When you have completed the set- VOLUME ADJUSTMENT Note: You can adjust the volume for telephone conversations and voice output while they are being heard by using the volume control 2. RADIO MODE Radio mode This unit is equipped with an RDS radio receiver. Many of the receivable FM stations transmit a signal that not only carries the programme but also additional information such as the station name and programme type (PTY). The station name appears in the display as soon as the radio is able to receive it and the RDS function is activated. You can optionally display the programme type. For further details, please read the section entitled "Programme type (PTY)". Automatic Sound This function adjusts the volume of your car radio automatically to your driving speed. This requires your device to be connected as described in the installation guide. The automatic volume booster can be set in six stages (0-5). Press the MENU button 8. Press the button : until "AUTO SOUND" appears in the display. Set the volume adjustment with the buttons :. When the setting process is complete, press the MENU button 8 or OK ;. Note: The right speed-adjusted volume setting depends on noise levels inside your car. Try various values (0-5) until you find the best setting. Setting the tuner To ensure that the tuner works properly, the device must be configured for your region. You can choose between Europe (EUROPE) and the USA (N AMERICA). By default, the tuner is set to the region in which the device was sold. If you experience problems with radio reception, please check this setting. These operating instructions refer to the "N AMERICA" setting. Press the MENU button 8. Keep pressing the button : until "TUNER AREA" appears in the display. Press the or button : for longer than two seconds to switch between "EUROPE" and "N AMERICA". Press the MENU button 8 or OK ;. 10 RADIO MODE If you are in CD, CD changer/Compact Drive MP3 or AUX mode, There are various ways of tuning into a station. Automatic seek tuning ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Switching to radio mode Tuning into a station press the FM TS button 5 for FM radio mode. or Press the or button :. press the AM button ? for AM radio mode. The unit tunes into the next receivable station. Tuning into stations manually You can also tune into stations manually. Switching the RDS function on/ off To use the RDS functions, press the RDS button 4. The RDS function is active when RDS lights up in the display with a symbol. Press the or button :. Selecting the waveband / memory bank This unit can receive programmes broadcast over the FM and AM wavebands. There are three memory banks (FM1, FM2 and FMT) for the FM waveband and two memory banks (AM and AMT) for the AM waveband. Six stations can be stored in each memory bank. To switch between the FM memory banks, Note: You can only tune into stations manually on the FM waveband if the RDS and PTY functions are deactivated. Setting the sensitivity of station seek tuning You can choose whether to only tune into stations with a strong reception or to also tune into those with a weak reception. Press the MENU button 8. Keep pressing the button : until "SENS" appears in the display. "SENS 6" means that the tuner is set to the highest sensitivity setting. "SENS 1" is the lowest setting. briefly press the FM TS button 5 repeatedly until the required memory bank appears in the display. To switch between the AM memory banks, Set the required sensitivity using the or button :. When you have finished making your changes, briefly press the AM button ? repeatedly until the required memory bank appears in the display. press the MENU button 8 or OK ;. 11 RADIO MODE Storing stations Storing stations manually Scanning receivable stations (SCAN) You can briefly play (scan) all the receivable stations. You can set the scanning time (scantime) to between 5 and 30 seconds in the menu. Starting SCAN Select the required memory bank (FM1, FM2 or FMT) or the AM waveband. Tune into the required station. Press one of the station buttons 1 6 > for longer than two seconds to store the station to that button. Keep the OK button ; pressed for longer than two seconds. Scanning begins. "SCAN" appears briefly in the display followed by a flashing display of the current station name or frequency. Stopping SCAN and continuing listening to a station Storing stations automatically (Travelstore) You can automatically store the six stations with the strongest reception in the region. The stations are stored in the FMT memory bank in FM radio mode or in the AMT memory bank in AM radio mode. Note: Any stations that were previously stored in these memory banks are deleted in the process. Press the OK button ;. Scanning is stopped and the station that was tuned into last will remain active. Keep the FM TS button 5 pressed for longer than two seconds. The station storing procedure begins. "TRAVEL-STORE" appears in the display. After the process is completed, the station stored in location 1 of the FMT or AMT memory bank will be played. Setting the scantime Press the MENU button 8. Keep pressing the button : until "SCANTIME" appears in the display. Set the required scantime using the or buttons :. When you have finished making your changes, press the MENU button 8 or OK ;. Note: The set scantime also applies to scanning in CD mode but not to scanning in CD changer mode. Listening to stored stations Select the memory bank or waveband. Press the station button 1 - 6 > that corresponds to the station you want to listen to. 12 RADIO MODE Besides transmitting the station name, some FM stations also provide information on the type of programme that they are broadcasting. Your radio can receive and display this information. For example, the programme types can be: ROCK CLS_ROCK TOP_40 ADLT_HIT COUNTRY OLDIES SOFT_RCK SPORTS TALK Using the PTY function, you can directly select stations of a particular programme type. Switching PTY on/off to select a programme type that is stored on one of these buttons. The selected programme type is displayed briefly. or button : to start seek tuning. The next station corresponding to your selected programme type will then be tuned into. ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Programme type (PTY) Press one of the buttons 1 - 6 > Press the Storing a programme type on a station button Select a programme type using the or button :. Keep the required station button 1 6 > pressed for longer than two seconds. The programme type is now stored on the selected button 1 - 6 >. Press the MENU button 8. Keep pressing the or button : until "PTY ON" or "PTY OFF" appears in the display. Press the or button : to switch PTY ON or OFF. When PTY is switched on, PTY lights up in the display. ;. Optimising radio reception Treble reduction feature during interference (HICUT) The HICUT function improves reception during poor radio reception (only FM). If interference occurs, the treble is automatically reduced thus reducing the interference level. Switching HICUT on/off Press the MENU button 8 or OK Selecting a programme type and starting seek tuning Press the or button :. The current programme type appears in the display. Press the MENU button 8. Keep pressing the button : until "HICUT" appears in the display. or button : to adjust HICUT. "HICUT 0" means that no reduction will be made, "HICUT 3" means a maximum 13 If you want to select another programme type, you can do so by pressing the or button : whilst this display is visible. Or Press the RADIO MODE automatic reduction of the treble and interference level will be applied. Displaying scrolling text Some radio stations use the RDS signal to transmit advertising or other information instead of their station name. These scrolling texts appear in the display. You can deactivate the "scrolling text" display for stations that you have stored on the station buttons. Press the MENU button 8 or OK ;. Switching bandwidth during interference (SHARX) The SHARX function allows you to largely avoid interference caused by neighbouring radio stations (FM only). Switch on the SHARX function if you experience a high radio station density. Switching SHARX on/off Keep the RDS button 4 pressed until "NAME FIX" appears in the display. Press the MENU button 8. Keep pressing the button : until "SHARX" appears in the display. or button : to switch SHARX on/off. "SHARX OFF" means automatic bandwidth switching is deactivated, "SHARX ON" means it is activated. ;. To allow scrolling texts to appear in the display again, keep the RDS button 4 pressed until "NAME VAR" appears in the display. Note: If you tune into an already stored station using a different means (e.g. using SCAN or by searching), the "scrolling texts" will be displayed. Press the Setting the display When in radio mode, you have the option of continuously displaying the time or continuously displaying the station name or frequency. Press the MENU button 8 or OK Keep the DIS button 7 pressed until the required display appears. 14 CD MODE You can use this device for playing standard CDs, CD-Rs and CD-RWs with a diameter of 12 cm. Besides playing CDs containing audio data on this device, you can also play CDs containing MP3 files. For further details, please read the chapter entitled "MP3 mode" that follows this chapter. To ensure the system functions properly, only use CDs labelled with the compact disc logo. Problems might be experienced when trying to play copy-protected CDs. Blaupunkt cannot guarantee the proper functioning of copy-protected CDs! Risk of damage to CD drive! Single CDs with a diameter of 8 cm and CDs which are not circular ("shape CDs") should not be used. We accept no liability for any damage to the CD drive that may occur as a result of the use of unsuitable CDs. sure until you feel it latch into place. CD playback begins. If there is already a CD in the drive, press the SRC button @ repeatedly until "CD" appears on the display. Playback begins from the point at which it was last interrupted. ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS CD Mode Close the panel using light pres- Selecting a track Press one of the buttons on the arrow block : to select the next or previous track. If the or button : is pressed once, the current track is played again from the beginning. Quick track selection To quickly select tracks backwards or forwards, keep one of the buttons : pressed until fast reverse / forward track selection begins. Starting CD mode If there is no CD in the drive, Press the button 9. The flip/release panel opens. Gently insert the CD into the CD compartment with the printed side uppermost until you feel some resistance. The CD will be drawn into the drive. Do not hinder or assist the drive as it draws the CD in. Fast search (audible) For a fast search backwards or forwards keep the buttons : pressed until the fast search backwards or forwards begins. 15 CD MODE Random play (MIX) Press the button 5 MIX >. "MIX CD" appears briefly on the display, the MIX symbol lights up. The next track played will be randomly selected. Stopping MIX Repeating a track (REPEAT) If you would like to repeat a track, press button 4 RPT >. "REPEAT TRCK" appears briefly on the display, the RPT symbol lights up. The track is then repeated until RPT is deactivated. Stopping REPEAT Press the button 5 MIX > once again. "MIX OFF" appears briefly on the display, the MIX symbol goes out. If you would like to end repeat, press the button 4 RPT > once again. "REPEAT OFF" appears briefly on the display, the RPT symbol goes out. Normal playback is resumed. Scanning tracks (SCAN) You can briefly listen in to all the tracks on a CD. Hold down the OK button ; for more than two seconds. The next track starts to play. Note: The scanning time is adjustable. Read about setting the scanning time in the section "Setting the scanning time" in the chapter "Radio mode". Stopping SCAN and continuing playback Interrupting play (PAUSE) Press the button 1 >. "PAUSE" appears on the display. Ending Pause Press the button 1 pause. Play then resumes. > during the Press the OK button ; to end scanning. The current track will then continue to play. Changing the display To alter the display between track number and time or track number and playing time or track number 7 and CD name, press the DIS button once or several times for more than two seconds until the desired elements appear on the display. 16 CD MODE To make it easier for you to recognise your CDs, the car radio offers an individual name option for 30 CDs. The names should have a maximum of eight digits. If you attempt to allocate more than 30 names, "FULL" will appear on the display. Entering/altering CD names beep sounds at the end of four seconds and "DELETE NAME" appears on the display. ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Naming CDs Hold down the MENU button 8. A Release the MENU button 8. The CD name is now deleted. Press the OK button ; to return to the menu. Listen to the desired CD. Press the MENU button 8. Use the buttons : to select "CD NAME". Displaying CD text Some CDs feature so-called CD text. The CD text may include the name of the performer, the album and the track name. You can have the CD text displayed as running text at every change of track. After the CD text has been displayed once, the standard display is used. Please see the section "Changing the display". If the CD in the player contains no CD text, "NO TEXT" will appear on the display when the CD text function is activated. Switching CD text on/off Press the or button : twice. You are now in the edit mode. If the CD you have selected is still unnamed, eight underlines appear on the display. The current input position flashes. Use the buttons : to select your characters. If a position is left blank, you have selected the underline. Use the or button : to proceed to your next input position. ; to save the name entered. Press the MENU button 8 or OK Clearing a CD name Listen to the CD whose name you wish to clear. Press the MENU button 8. Press the button : repeatedly until "CD TEXT" appears on the display. Switch on the CD text function by pressing the buttons : ("CD TEXT ON") or off ("CD TEXT OFF"). Press the MENU button 8. Use the buttons : to select "CD NAME". When you have completed the setting procedure, press the MENU button 8 or OK ;. Press the or button :. 17 CD MODE Removing a CD Press the button 9. The flip/release panel opens to the front and the CD is ejected. MP3 MODE MP3 mode You can also use this car radio for playing CD-Rs and CD-RWs containing MP3 music files. MP3 is a process developed by the Fraunhofer Institute for compressing CD audio data. Compression allows data to be reduced to around 10% of their original size without a noticeable loss in quality (at a bit rate of 128 Kbit/s). If a lower bit rate is used to convert CD audio data to MP3, you can create smaller files but there will be a loss in quality. Carefully remove the CD and close the flip/release panel. Preparing the MP3-CD The various combinations of CD burners, CD burning software and CD blanks may lead to problems arising with the ability to play certain CDs. If problems occur with your own burned CDs, you should try another brand of CD blank or choose another blank colour. Best results are achieved with CD blanks that provide 74 minutes of playing time. The format of the CD must be ISO 9660 Level 1 / Level 2 or Joliet. Other formats cannot be played reliably. Avoid multi-sessions. If you write more than one session to the CD, only the first session will be detected. You can create a maximum of 255 directories on a CD. Each of these directories can be accessed using this device. Each directory can in turn contain up to 255 tracks and subdirectories that can also be accessed. A maximum of 8 levels of directories are allowed. 18 MP3 MODE manually. To do so, you should place a number (e.g. "001", "002", etc.) in front of each file name - the leading zeros must also be included. MP3 tracks can contain addition information such as the artist, track and album names (ID3 tags). This device can display ID3 tags if they are version 1. When creating (encoding) MP3 files from audio files, you should use bit rates up to a maximum of 256 kB/sec. Only MP3 files with the ".MP3" file extension can be played on this device. Note: To ensure uninterrupted playback, do not attempt to change the file extension to ".MP3" of any files other than MP3 files and then attempt to play them! Do not use "mixed" CDs containing both non-MP3 data and MP3 tracks. Do not use mix-mode CDs containing both audio tracks and MP3 tracks. ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS D01 D02 D03 T001 T002 T003 T004 T005 T001 T002 T003 T004 T005 T006 D04 T001 T002 T003 T004 T005 T006 T007 T008 T009 T010 T011 Each directory can be named using a PC. The directory name can be displayed in the device's display. Name the directories and tracks using your CD burner software. The software's operating instructions will provide details on how to do this. Note: When naming directories and tracks you should avoid using special characters. Use a maximum of 32 characters for track names and directory names. If you like your files to be in the correct order, you should use burner software that places files in alphanumerical order. If your software does not provide this feature, you can also sort the files Switching to MP3 mode MP3 mode is activated in the same way as normal CD mode. For further details, please read the section entitled "Switching to CD mode / Inserting a CD" in the "CD mode" chapter. Selecting a directory To move up or down to another directory, press the or several times. button : once or 19 MP3 MODE Note: Any directories not containing MP3 files will be skipped automatically. If, for instance, you are listening to tracks in directory D01 and you select the next directory by pressing the or button :, directory D02 (which does not contain any MP3 tracks) will be skipped and D03 will be played. The display will then automatically switch from "D02" to "D03". "MIX CD" appears in the display and the MIX symbol lights up. All the tracks in the current directory are played randomly. After that, all the tracks in the next directory are played randomly. Cancelling MIX To cancel MIX, keep pressing button 5 MIX > until "MIX OFF" appears in the display and the MIX symbol disappears. Selecting tracks To move up or down to another track in the current directory, Scanning tracks (SCAN) You can briefly play all the tracks on the CD. press the or button : once or several times. If you press the button : once, the current track will be played again from the beginning. Press the OK button ; for longer than two seconds. The next track will then be played briefly. "SCAN" appears in the display. The tracks on the CD are briefly played in ascending order. Note: You can set the scanning time (scantime). For further details on setting the scantime, please read the section entitled "Setting the scantime" in the "Radio mode" chapter. Stopping SCAN and continuing playback Fast searching (audible) To fast search backwards or forwards, keep one of the or button : pressed until fast searching backwards / forwards begins. Random track play (MIX) To play the tracks in the current directory in random order, briefly press button 5 MIX >. "MIX DIR" appears in the display and the MIX symbol lights up. To play all the tracks on the inserted MP3-CD in random order, Briefly press the OK button ;. The currently scanned track will then continue to be played normally. briefly press button 5 MIX > again. 20