User manual BLAUPUNKT ACAPULCO MP54

Radio / CD / MP3 Acapulco MP54 US Casablanca MP54 US Operating instructions 7 644 275 310 7 644 295 310 http://www.blaupunkt.com Open here 2 1 16 2 15 3 17 4 14 5 13 12 6 11 10 9 7 8 3 SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH DANSK PORTUGUÊS ESPAÑOL CONTROLS 1 Button to switch the device on/ off and operate the volume mute feature button to open the flip-release control panel RDS button to switch the RDS function on/off (Radio Data System). FM button to select FM radio mode as the source and select the FM memory banks. TS to start the Travelstore function Volume control Keys 1 - 3 Arrow buttons DIS·ESC button to change the display content and close menus. MENU button to open the basic settings menu. Long press: Deactivate / activate demo mode. : OK button to confirm menu entries and activate the scan function. Keys 4 - 6 Display AM button to select AM radio mode as the source and select the AM memory banks. AUDIO button to adjust the bass, treble, balance and fader. DEQ button to activate/deactivate and set up the equalizer. SRC button to switch between the CD/MP3, CD changer (if connected) and AUX sources. button to eject the CD from the device 2 3 ; < = 4 > ? @ 5 6 7 8 A 9 4 CONTENTS Road safety ..................................... 7 Installation ....................................... 7 Accessories .................................... 7 Activating / deactivating demo mode .................. 8 DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Notes and accessories ............ 7 Switching bandwidth during interference (SHARX) .................... 16 Configuring the display .................. 16 Naming radio stations (only FM) .... 17 Activating/deactivating the radio text display .................................... 17 Detachable control panel ......... 8 Theft protection ............................... 8 Detaching the control panel ............. 8 Attaching the control panel .............. 9 CD mode ................................ 18 Switching to CD mode .................. 18 Selecting tracks ............................ 18 Fast track selection ....................... 18 Fast searching (audible) ................ 18 Random track play (MIX) ............... 18 Scanning tracks (SCAN) ............... 19 Repeating tracks (REPEAT) ........... 19 Pausing playback (PAUSE) ............ 19 Changing the display ..................... 19 Displaying CD text/CD name ......... 20 Naming CDs ................................. 20 Ejecting a CD ................................ 22 Switching on/off ...................... 9 Adjusting the volume ............. 10 Setting the power-on volume ......... 10 Instantaneously decreasing the volume (mute) ................................ 10 Telephone audio / navigation audio .. 10 Setting the volume of the confirmation beep .......................... 11 Automatic sound ........................... 11 MP3 mode .............................. 22 Preparing an MP3-CD ................... 22 Switching to MP3 mode ................ 24 Configuring the display .................. 24 Selecting a directory ...................... 24 Selecting tracks ............................ 25 Fast searching (not in MP3 browse mode) ............ 25 Random track play ­ MIX (not in MP3 browse mode) ............ 25 Scanning tracks ­ SCAN (not in MP3 browse mode) ............ 26 Repeating individual tracks or whole directories ­ REPEAT (not in MP3 browse mode) ............ 26 Pausing playback (PAUSE) ............ 26 Radio mode ............................ 12 Switching to radio mode ................ 12 RDS function (only FM) ................. 12 Selecting the waveband / memory bank ................................. 13 Tuning into a station ....................... 13 Setting the sensitivity of station seek tuning .................................... 13 Storing stations ............................. 14 Storing stations automatically (Travelstore) .................................. 14 Listening to stored stations ............ 14 Scanning receivable stations (SCAN) ......................................... 14 Setting the scanning time .............. 14 Programme type (PTY) .................. 15 Optimising radio reception ............. 16 5 CONTENTS CD-changer mode ................. 27 Switching to CD-changer mode ..... 27 Selecting CDs ............................... 27 Selecting tracks ............................ 27 Fast searching (audible) ................ 27 Changing the display ..................... 28 Repeating individual tracks or whole CDs (REPEAT) .................... 28 Random track play (MIX) ............... 28 Scanning all tracks on all CDs (SCAN) ......................................... 29 Pausing playback (PAUSE) ............ 29 Naming CDs ................................. 29 Equalizer ................................ 34 Switching the equalizer on/off ........ 34 Selecting sound presets ................ 34 Selecting vehicle presets ............... 34 Automatic equalizer calibration (only Acapulco MP54) ................... 35 Manually adjusting the equalizer ..... 36 Help adjusting the equalizer ........... 37 Adjusting the display settings 38 Switching the bar graph on/off ....... 38 Switching the power meter on/off .. 38 Adjusting the display brightness ..... 38 Adjusting the viewing angle ........... 39 Setting the display illumination colour (only Acapulco MP54) ......... 39 CLOCK time ........................... 31 Displaying the time ........................ 31 Setting the clock automatically ....... 31 Setting the clock manually ............. 31 Selecting 12/24-hour clock mode .. 31 Displaying the time continuously when the device is off and the ignition is on .................................. 32 External audio sources .......... 41 Switching the AUX input on/off ...... 41 Specifications ........................ 42 Amplifier ........................................ 42 Tuner ............................................. 42 CD ................................................ 42 Pre-amp out .................................. 42 Input sensitivity .............................. 42 Sound ..................................... 32 Adjusting the bass ......................... 32 Adjusting the treble ....................... 32 Setting the left/right volume distribution (balance) ..................... 33 Adjusting the front/rear volume distribution (fader) ......................... 33 X-BASS .................................. 33 6 NOTES AND ACCESSORIES Thank you for choosing a Blaupunkt product. We hope you enjoy using this new piece of equipment. Please read these operating instructions before using the equipment for the first time. The Blaupunkt editors are constantly working on making the operating instructions clearer and easier to understand. However, if you still have any questions on how to operate the device, please contact your dealer or the telephone hotline for your country. You will find the telephone number printed at the back of this booklet. We provide a manufacturer guarantee for our products bought within the European Union. You can view the guarantee conditions at www.blaupunkt.de or ask for them directly at: Blaupunkt GmbH Hotline Robert Bosch Str. 200 31139 Hildesheim Germany Road safety has absolute priority. Only operate your car sound system if the road and traffic conditions allow you to do so. Familiarise yourself with the device before setting off on your journey. You should always be able to hear police, fire and ambulance sirens in good time from inside your vehicle. For this reason, listen to your car sound system at a suitable volume level during your journey. DEUTSCH Notes and accessories Road safety Installation If you want to install your car sound system yourself, please read the installation and connection instructions that follow these operating instructions. Accessories Only use accessories approved by Blaupunkt. Remote control The optional RC08 or RC10 remote control allows you to access the most important functions of your car sound system safely and conveniently from your steering wheel. You cannot switch the device on/off using the remote control. Amplifiers You can use all Blaupunkt and Velocity amplifiers. 7 DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH NOTES AND ACCESSORIES CD changers You can connect the following Blaupunkt CD changers: CDC A 08, IDC A 09 and CDC A 03. Compact Drive MP3 You can connect the Compact Drive MP3 instead of a CD-changer in order to play MP3 music tracks. If you decide to connect a Compact Drive MP3, you will first need to use a computer to store the MP3 music tracks on the MicrodriveTM hard disk that is inside the Compact Drive MP3. Then, when the Compact Drive MP3 is connected to the car sound system, you can play the tracks like normal CD music tracks. The Compact Drive MP3 is operated in a similar way to a CD-changer. Most of the CD-changer functions can also be used with the Compact Drive MP3. CONTROL PANEL Detachable control panel Theft protection The device is equipped with a detachable control panel (flip-release panel) as a way of protecting your equipment against theft. The device is worthless to a thief without this control panel. Protect your device against theft by taking the control panel with you whenever you leave your vehicle. Do not leave the control panel inside your vehicle not even in a hiding place. The control panel has been designed to be easy to use. Note: Never drop the control panel. Never expose the control panel to direct sunlight or other heat sources. Avoid direct skin contact with the control panel's electrical contacts. If necessary, clean the contacts with a lint-free cloth and some alcohol. Activating / deactivating demo mode The device is supplied from the factory with demo mode activated. The various functions of the device are displayed graphically as animations in the display during demo mode. You can also deactivate demo mode. Detaching the control panel Press button 2. The control panel opens out towards you. Press and hold down the MENU button 9 for longer than four seconds to activate/deactivate demo mode. Hold the control panel by its right side and then pull the control panel straight out of the bracket. 8 CONTROL PANEL Note: All the current settings are saved. Any CD already inserted in the device remains there. The device switches off automatically after approx. one minute. SWITCHING ON/OFF There are various ways of switching the device on/off: Switching on/off using the vehicle ignition The device will switch on/off simultaneously with the ignition if the device is correctly connected to the vehicle's ignition and you did not switch the device off by pressing button 1. Switching the device on/off using the detachable control panel DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Switching on/off Attaching the control panel Hold the control panel at approximately right angles to the device. Slide the control panel into the device's guides that are positioned on the left and right at the lower edge of the housing. Push the control panel carefully into the bracket until it clicks into place. Detach the control panel. The device switches off automatically after approx. one minute. Flip up the control panel and carefully press it into the device until it clicks into place. Attach the control panel again. The device switches on. The last setting (radio, CD, CD changer or AUX) will be reactivated. Switching on/off using button 1 To switch on the device, press but2. 1. Note: When attaching the control panel, make sure you do not press the display. If the device was still switched on when you removed the control panel, it will automatically switch on with the last setting activated (radio, CD/MP3, CD changer or AUX) when the panel is replaced. ton 1. To switch off the device, press and hold down button 1 for longer than two seconds. The device switches off. Note: To protect the vehicle battery, the device will switch off automatically after one hour if the ignition is off. 9 ADJUSTING THE VOLUME Adjusting the volume You can adjust the volume in steps from 0 (off) to 50 (maximum). To increase the volume, Risk of injury! If the power-on volume is set to maximum, the volume level can be very high when the device is switched on. If the volume was set to maximum before the device was switched off and the power-on volume is set to "LAST VOLUME", the volume level can be very high when the device is switched on again. Severe damage to your hearing can be caused in both cases! When you have finished making your changes, turn the volume control 5 clockwise. To decrease the volume, turn the volume control 5 anticlockwise. Setting the power-on volume You can set the default volume level at which the device plays when it is switched on. Press the MENU button 9. Press the or button 7 repeatedly until "VOLUME MENU" appears in the display. press the MENU button 9. Instantaneously decreasing the volume (mute) You can instantaneously decrease the volume (mute) to a level preset by you. Press the OK button : to display the volume menu. "ON VOLUME" and the currently set value are displayed or "LAST VOLUME" is displayed. Briefly press button 1. "MUTE" appears in the display. Cancelling mute To return to your previously set volume level, Adjust the power-on volume using the buttons 7. To help you adjust the setting more easily, the device will increase or decrease the volume as you make your changes. If you change the setting to "LAST VOLUME", the volume when the device switches on will be the same as the volume level that was set the last time you switched the device off. briefly press button 1 again. Telephone audio / navigation audio If your car sound system is connected to a mobile telephone or a navigation system, the sound system's volume will be muted as soon as you "pick up" the phone or as soon as a navigation announcement is made. You will then hear the caller or navigation announcement over the car sound system's loudspeak- 10 ADJUSTING THE VOLUME ers. In order for this feature to work, the mobile telephone or navigation system must be connected to the car sound system as described in the installation instructions. You will need a cable for this with the following Blaupunkt number: 7 607 001 503. You can find out from your Blaupunkt dealer which navigation systems can be used with your car sound system. You can set the volume level at which telephone calls and navigation announcements will initially be heard. Press the MENU button 9. Press the or button 7 repeatedly until "VOLUME MENU" appears in the display. DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Setting the volume of the confirmation beep The system will output a confirmation beep for some functions if you keep a button pressed down for longer than two seconds, for instance, when assigning a radio station to a station preset button. You can adjust the volume of this beep. Press the MENU button 9. Press the or button 7 repeatedly until "VOLUME MENU" appears in the display. Press the OK button : to display the volume menu. Press the Press the OK button : to display the volume menu. or button 7 repeatedly until "PHONE/NAVI" appears in the display. Set your preferred volume level usbuttons 7. ing the When you have finished making your changes, press the MENU button 9. or button 7 repeatedly until "BEEP VOL" appears in the display. Adjust the volume using the buttons 7. "0" means that the beep is deactivated, "6" means that the maximum beep volume is set. When you have finished making your changes, Press the press the MENU button 9. Automatic sound This feature automatically adjusts the volume of the car sound system to suit the speed at which the vehicle is travelling. In order for this to work, your car sound system must be connected as described in the installation instructions. You can adjust the automatic volume boost feature in six steps from (0 to 5). Note: You can use the volume control 5 to adjust the volume of telephone calls and navigation announcements whilst you are listening to them. 11 ADJUSTING THE VOLUME Press the MENU button 9. Press the button 7 repeatedly until "VOLUME MENU" appears in the display. RADIO MODE Radio mode This device is equipped with an RDS radio receiver. Many of the receivable FM stations broadcast a signal that not only carries the programme but also additional information such as the station name and programme type (PTY). The station name appears in the display as soon as the tuner receives it. Press the OK button : to display the volume menu. or button 7 repeatedly until "AUTO SOUND" appears in the display. Set the volume adjustment level buttons 7. (0 - 5) using the When you have finished making your changes, press the MENU button 9. Press the Switching to radio mode If you are in CD/MP3, CD-changer or AUX mode, press the FM·TS button 4 for FM radio mode. Or Note: The optimum setting (0 - 5) for the speed-dependent volume adjustment feature depends on how noise levels develop in your particular vehicle. You will need to test various settings in order to find out which is best suited to your vehicle. press the AM button = for AM radio mode. RDS function (only FM) The RDS function extends your radio's range of functions. If the RDS function is activated, the device automatically tunes into the best receivable frequency for the station that is currently set. Switching the RDS function on/off To use the RDS function, press the RDS button 3. The RDS function is active when RDS lights up in the display. 12 RADIO MODE DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Selecting the waveband / memory bank Selecting the waveband / memory bank You can use this device to receive programmes broadcast over the FM and AM wavebands. There are three memory banks (FM1, FM2 and FMT) for the FM waveband and two memory banks (AM and AMT) for the AM waveband. Six stations can be stored in each memory bank. To switch between the FM1, FM2 and FMT memory banks, Setting the sensitivity of station seek tuning You can choose whether the radio should only tune into stations providing good reception or whether it can also tune into those with a weak reception. Press the MENU button 9. "TUNER MENU" appears in the display. Press the OK button : to display the tuner menu. Press the briefly press the FM·TS button 4. To switch between the AM and AMT memory banks, briefly press the AM button =. Tuning into a station There are various ways of tuning into a station. Automatic station seek tuning or button 7 repeatedly until "SENS" appears in the display. The display shows the currently set sensitivity level. "SENS HI3" means that the tuner is set to the highest sensitivity setting. "SENS LO1" means it is set to the lowest sensitivity setting. buttons 7. want using the When you have finished making your changes, Set the sensitivity level that you Press the or button 7. press the MENU button 9. Note: You can set different sensitivity levels for FM and AM. The radio tunes into the next receivable station. Tuning into stations manually You can also tune into stations manually. Note: You can only tune into stations manually if the RDS function is deactivated. Press the or button 7. 13 RADIO MODE Storing stations Storing stations manually Scanning receivable stations (SCAN) You can use the scan function to play all the receivable stations briefly. You can set the scanning time in the menu to between 5 and 30 seconds. Starting SCAN Select the memory bank that you want: FM1, FM2, FMT or AM, AMT. Tune into the station that you want. Press and hold down one of the station buttons 1 - 3 6 or 4 - 6 ; for longer than two seconds to assign the station to that button. Press and hold down the OK button : for longer than two seconds. Scanning begins. "SCAN" appears briefly in the display followed by a flashing display of the current station name or frequency. Cancelling SCAN and continuing listening to a station Storing stations automatically (Travelstore) You can automatically store the six stations offering the best reception in the region. The stations are stored in the FMT or AMT memory bank. Note: Any stations that were previously stored in this memory bank are deleted in the process. Press the OK button :. Scanning stops and the radio continues playing the station that it tuned into last. Press and hold down the FM·TS button 4 or AM button = for longer than two seconds. The storing procedure begins. "TRAVEL STORE" appears in the display. After the process is completed, the station stored in location 1 of the FMT or AMT memory bank will be played. Setting the scanning time Press the MENU button 9. "TUNER MENU" appears in the display. Press the or button 7 repeatedly until "VARIOUS MENU" appears in the display. Press the OK button : to display the menu. "SCAN TIME" and the currently set time are displayed. Listening to stored stations Select the memory bank. Press the station button 1 - 3 6 or 4 - 6 ; that the station you want to listen to is assigned to. Set the scanning time that you want using the buttons 7. 14 RADIO MODE DEUTSCH When you have finished making your changes, Selecting a programme type and starting seek tuning press the MENU button 9. Note: The scanning time that you set is also applied by the system to scanning carried out in CD/MP3 mode and CD-changer mode. Press the or button 7. If you want to select another programme type, you can do so by pressing the or button 7 whilst this display is visible. Or Switching PTY on/off Press the MENU button 9. "TUNER MENU" appears in the display. Press the OK button : to display the tuner menu. "PTY" and the current setting appear in the display. Note: If the tuner does not find a station that corresponds to the selected programme type, you will hear a beep and "NO PTY" appears briefly in the display. The radio will then retune to the station that it received last. Press the or button 7 to switch PTY ON or OFF. Press the OK button :. 15 DANSK PORTUGUÊS ESPAÑOL SVENSKA Besides transmitting the station name, some FM stations also provide information on the type of programme that they are broadcasting. Your car radio can receive and display this information. For example, the programme types can be: CULTURE TRAVEL JAZZ SPORT NEWS POP ROCK CLASSICS You can use the PTY function to select stations of a particular programme type. Press one of the buttons 1 - 3 6 or 4 - 6 ; to select a programme type that is assigned to one of these buttons. The selected programme type appears briefly in the display. or button 7 to start seek tuning. The radio will then tune into the next station that it finds that corresponds to your selected programme type. NEDERLANDS Press the ITALIANO FRANÇAIS Programme type (PTY) ENGLISH The programme type that you selected last appears in the display. RADIO MODE Assigning a programme type to a station button Switching bandwidth during interference (SHARX) The SHARX function allows you to largely avoid interference caused by neighbouring radio stations (FM only). Switch on the SHARX function if the density of radio stations in your area is very high. Switching SHARX on/off Select a programme type using the or button 7. Press and hold down the station button 1 - 3 6 or 4 - 6 ; that you want for longer than two seconds. The programme type will then be assigned to the selected button 1 - 3 6 or 4 - 6 ;. Press the MENU button 9. "TUNER MENU" appears in the display. Optimising radio reception Treble reduction feature during interference (HICUT) The HICUT function improves reception during poor radio reception (only FM). If interference occurs, the system automatically reduces the treble thus reducing the interference level. Switching HICUT on/off Press the OK button : to display the tuner menu. Press the or button 7 repeatedly until "SHARX" appears in the display. Press the MENU button 9. "TUNER MENU" appears in the display. or button 7 to switch SHARX on/off. "SHARX OFF" means automatic bandwidth switching is deactivated, "SHARX ON" means it is activated. Press the Press the OK button : to display the tuner menu. Press the MENU button 9. Configuring the display You have the option in radio mode of displaying the frequency / radio text or the frequency / radio text and the time in the lower display area. You can also make the system show just the station name (if receivable) in the entire display. Press the or button 7 repeatedly until "HICUT" appears in the display. or button 7 to adjust the HICUT setting. "HICUT 0" means that no automatic reduction of the interference level will be made; "HICUT 2" means that a maximum reduction will be made. Press the Briefly press the DIS·ESC button 8 to switch between the options. Press the MENU button 9. 16 RADIO MODE This device allows you to give stored radio stations their own name. The name can be up to eight characters long. This name is displayed in the second line of the display beneath the frequency. You can only give stations a name that you have stored together with their frequency and which do not already have their own RDS name. DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Naming radio stations (only FM) Activating/deactivating the radio text display Some stations use the RDS signal to broadcast scrolling texts known as radio texts. You can allow radio texts to be displayed or you can block them. Press the MENU button 9. "TUNER MENU" appears in the display. Press the OK button : to display the tuner menu. Press the MENU button 9. "TUNER MENU" appears in the display. Press the Press the OK button : to display the tuner menu. or button 7 repeatedly until "R-TEXT" appears in the display. Press the or button 7 repeatedly until "STATION NAME" appears in the display. button 7. Press the or button 7 to switch radio text on/off. "R-TEXT OFF" means that no radio texts will be displayed and "R-TEXT ON" means they will be displayed. Press the You will now enter editing mode. The currently set name is displayed and the first text input position flashes. Press the MENU button 9. Use the / buttons 7 to select the character that you want. If you want an empty space, simply select the underscore. or button 7 to move from one text input position to another. Use the Press the MENU button 9. 17 CD MODE CD mode You can use this device to play standard audio CDs, CD-Rs and CD-RWs with a diameter of 12 cm. To avoid problems when playing CDs, you should not burn CDs at speeds greater than 16speed. Besides being able to play audio CDs on this device, you can also play CDs containing MP3 music files. For further information, please read the chapter entitled "MP3 mode". Risk of severe damage to the CD drive! CD singles with a diameter of 8 cm and non-circular contoured CDs (shape CDs) must not be used. We accept no responsibility for any damage to the CD drive that may occur as a result of the use of unsuitable CDs. Note: If the device was switched off before you inserted the CD, you will first have to switch on the device by pressing button 1 in order to start playing the CD. If a CD is already inserted in the drive, press the SRC button @ repeatedly until "CD" appears in the display. Playback begins from the point at which it was last interrupted. Selecting tracks Press one of the arrow buttons 7 to select the next or previous track. If you press the or button 7 once, the player will play the current track again from the beginning. Fast track selection To quickly select tracks backwards or forwards, Switching to CD mode If there is no CD inserted in the drive, press the button 2. The flip-release panel opens. Gently insert the CD with its printed side uppermost into the drive until you feel some resistance. The drive draws in the CD automatically. You must not hinder or assist the drive as it draws in the CD. Gently close the control panel whilst exerting a little pressure until you feel it click into place. The CD starts playing. press and hold down one of the / buttons 7 until fast-reverse / fast-forward track selection begins. Fast searching (audible) To fast search backwards or forwards, press and hold down one of the buttons 7 until fast searching backwards / forwards begins. Random track play (MIX) Press the 4 MIX button ;. "MIX CD ON" appears briefly in the display and the MIX symbol lights up. The next randomly selected track will then be played. 18 CD MODE Press the 4 MIX button ; again. "MIX CD OFF" appears briefly in the display and the MIX symbol disappears. DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Cancelling MIX Cancelling REPEAT If you want to cancel the repeat function, press the 5 RPT button ; again. "RPT TRK OFF" appears briefly in the display and the RPT symbol disappears. Normal playback is then resumed. Scanning tracks (SCAN) You can scan (briefly play) all the tracks on the CD. Press and hold down the OK button : for longer than two seconds. The next track will then be scanned. Note: You can set the scanning time. For further information, please read the section entitled "Setting the scanning time" in the "Radio mode" chapter. Cancelling SCAN and continuing listening to a track Pausing playback (PAUSE) Press the 6 button ;. "PAUSE" appears in the display. Cancelling pause button ; while in pause mode. Playback is resumed. Press the 6 Changing the display You can choose from various display options in CD mode: "NORMAL MODE": First line: Track number Second line: Playing time "INFO MODE": First line: Track number and playing time. Second line: CD text or CD name "CLOCK TIME": First line: Track number and playing time. Second line: CD text or CD name and clock time To stop scanning, press the OK button :. The currently scanned track will then continue to be played normally. Repeating tracks (REPEAT) If you want to repeat a track, press the 5 RPT button ;. "RPT TRK ON" appears briefly in the display and the RPT symbol lights up. The track is repeated continuously until you deactivate RPT. 19 CD MODE Note: In the menu you can configure whether you want to display the CD text or the CD name. For further information, please read the following section entitled "Displaying CD text". CD text can only be displayed if the appropriate information is contained on the CD. The CD name can only be displayed if you have already named the CD. For further information, please read the section entitled "Naming CDs". To switch between the display options, Press the OK button :. Press the or button 7 repeatedly until "CD TEXT" or "CD NAME" appears in the display. buttons 7 to switch between the "CD TEXT" and "CD NAME" options. When you have finished making your changes, Use the press the MENU button 9. Scrolling CD text If the CD that is inserted in the drive contains CD text, you can make the system display the text as scrolling text during playback. press the DIS·ESC button 8 once or several times until the display that you want appears. Briefly press the 1 SCL button 6. Naming CDs The car sound system allows you to assign names for up to 30 CDs so that you can recognise them more easily. The names can be up to eight characters long. "CD NAME FULL" will appear in the display if you try assigning more than 30 names. Entering/editing CD names Displaying CD text/CD name Some CDs include CD text. The CD text might contain the names of the artist, album and tracks. The CD text is displayed in the second line of the display instead of the CD name. You can allow the CD text to be displayed as scrolling text every time you switch to another track. The default display will appear again after the whole CD text has been shown once. For further information, please read the section entitled "Changing the display". Switching CD text on/off Listen to the CD that you want. Press the MENU button 9. Press the or button 7 repeatedly until "VARIOUS MENU" appears in the display. Press the MENU button 9. Press the or button 7 repeatedly until "VARIOUS MENU" appears in the display. Press the OK button :. Press the or button 7 repeatedly until "CD NAME EDIT" appears in the display. 20