User manual BLAUPUNKT ALASKA CJ70

Radio / MD Alaska CJ70 Dallas MD70 New Orleans MD70 Operating instructions Bitte aufklappen Open here Ouvrir s.v.p. Aprite la pagina Hier openslaan a.u.b. Öppna Por favor, abrir Favor abrir 2 1 14 2 13 3 12 4 11 10 5 9 8 6 7 3 ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH PORTUGUÊS OPERATING ELEMENTS DEUTSCH 1 2 3 4 5 6 7 8 9 : ; < = 31 PORTUGUÊS ESPAÑOL SVENSKA > button for opening the control unit Button for switching the device on and off and for muting the device Volume control Softkeys. The function of the Softkeys depends on the contents of the display at the time OK button for confirming menu entries and for leaving the menu DEQ button for calling up the equalizer menu Multi-function rocker MENU button, which calls up the basic settings menu AUD button for adjusting bass, treble, balance, fader and loudness DIS button, to change the contents of the display Display MD button to start MiniDisc playback CDC button, to start play from the CD changer (only if connected) or play from an external audio source (only if connected) TUNE button, to begin radio operation Calling up the radio function menu (only possible when the radio is switched on) NEDERLANDS ITALIANO FRANÇAIS ENGLISH CONTENTS Notes ............................................. 33 Road safety ........................................... 33 Fitting .................................................... 33 Accessories ........................................... 33 Guarantee ............................................. 33 International telephone information ....... 33 Selecting tracks ..................................... 47 Fast search (audible) ............................. 47 Random track replay (MIX) ................... 47 SCAN function ....................................... 47 Repeating tracks ................................... 47 Changing display contents: MD text .................................................. 47 Scrolling MD Text .................................. 48 Traffic announcements during MD operation ............................................... 48 Programming favourite MD tracks ......... 48 KeyCard theft protection ............. 34 Inserting the KeyCard ........................... 34 Removing the KeyCard ......................... 34 "Training" a second KeyCard / Replacing the KeyCard ......................... 34 KeyCard lost or damaged ...................... 35 Training a new KeyCard / entering the master code .......................................... 35 Visual theft protection (LED) ................. 35 Display Radio Passport Data ................ 36 Care of the KeyCard .............................. 36 CD changer operation (optional) 49 Starting CD changer operation ............. 49 Selecting a CD ...................................... 49 Selecting a track .................................... 49 Fast searching (audible) ........................ 49 Changing the display contents .............. 50 Repeat play of individual tracks or whole CDs (REPEAT) ........................... 50 Playing tracks in random sequence (MIX) ..................................................... 50 Sampling all tracks on all CDs (SCAN) . 50 Naming CDs .......................................... 51 Programming favourite CD tracks ......... 51 Switching on and off .................... Adjusting the volume ................... Tone and volume .......................... Adjusting the display ................... Radio Operation ........................... 36 37 38 39 40 Switching on radio operation ................. 40 RDS convenience function (AF, REG) ... 40 Select waveband/memory level ............. 41 Setting the station ................................. 41 Adjusting the sensitivity of the station search ................................................... 41 Saving a station ..................................... 42 Saving a station automatically (Travelstore) .......................................... 42 Going to a preset station ....................... 42 Scanning through stations .................... 42 Adjusting the sample duration (Scantime) ............................................. 43 Program type (PTY) .............................. 43 Optimising radio reception .................... 44 Switching between stereo and mono .... 45 Changing the displayed information ...... 45 CLOCK - Time ............................... 53 Setting the time ..................................... 53 Selecting 12/24-hour clock mode .......... 53 Having the time displayed constantly when the device is switched off ............. 53 Equalizer ....................................... 54 Adjustment instructions ......................... 54 Switching the equalizer on and off ........ 54 Adjusting the equalizer .......................... 54 Adjusting the sharpness of the filter ...... 54 Selecting the tone preset ...................... 54 Level meter / Spectrometer ................... 55 Equalizer adjustment guide ................... 55 Traffic Information ........................ 45 MiniDisc operation ....................... 46 Starting MiniDisc operation, Inserting MiniDisc .................................. 46 Removing MiniDisc ............................... 46 32 External audio sources ................ 56 TMC for dynamic navigation systems ......................................... 56 Pre-amplifier / subout .................. 57 Technical data .............................. 57 Installation instructions ............ 220 NOTES The Alaska DJ70 package includes a CD changer. For Dallas MD70 and New Orleans MD70, the following Blaupunkt CD changers can be connected: CDC A 06, CDC A 08, CDC A 072 and IDC A 09. If an adapter cable is used (Blaupunkt no. 7 607 889 093) the CDC A 05 or CDC A 071 CD changers can also be connected. DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Thank you for choosing a Blaupunkt product. We hope your new device brings you a lot of pleasure. CD changer Note Before you use your car radio for the first time, please read this guide carefully and make yourself familiar with the device. Keep this guide in the car for later reference. Road safety Road safety has the first priority. Only make adjustments to your car radio when the traffic conditions allow. Familiarise yourself with the device before you start driving. You must be able to hear audible alarms from police vehicles, fire engines or ambulances promptly when inside the vehicle. You must therefore listen at an appropriate volume when travelling. Guarantee The extent of the guarantee depends on the statutory conditions applicable in the country where the device was bought. Regardless of statutory requirements, Blaupunkt offer a twelve month guarantee. If you have any questions about your guarantee, please refer to your authorised Blaupunkt dealer. In every case the purchase receipt constitutes the guarantee documentation. Fitting If you want to fit your car radio yourself, read the fitting and connecting notes at the end of the guide. International telephone information If you have any questions about the operation of the device, or if you need any other information, please call us! The numbers for the telephone information are on the last page of this guide. Accessories Only use accessories approved by Blaupunkt. Remote control The optional RC 10, RC 10 H, and RC 08 remote controls allow you to control your car radio's basic functions safely and conveniently. Amplifier Any Blaupunkt amplifier can be used. 33 THEFT PROTECTION KeyCard theft protection A KeyCard is included with your car radio. The radio can also be operated with a second KeyCard. If one KeyCard becomes lost or damaged you can obtain a replacement through your Blaupunkt dealer. If you use two KeyCards, the settings of the first KeyCard are adopted by the first KeyCard. You can, however, store the following functions separately: station button allocation, bass, treble, balance and fader settings, loudness, traffic announcement volume, beep volume and equalizer adjustment. In addition to this, the last values selected for the waveband, station setting, traffic announcements, RDS, REG, scan time, search sensitivity, initial volume and SHARX are stored. This means that the basic settings you have selected are made as soon as the KeyCard is inserted. Push the KeyCard with the carriage in the direction of the arrow (2) carefully as far as the stop. Close the control unit (arrow 3). Note: If the wrong kind of card, such as a cashpoint card, is inserted into the device, "Wrong KC" will appear on the display. Remove the incorrect card, and insert a KeyCard that is known to the device. Removing the KeyCard In order to unlock the control unit press the button, 1. The control unit opens. Push the card with the "carriage" to the right as far as the stop. Remove the card from the control unit. Close the control unit. Note: In order to prevent theft, remove the KeyCard whenever you leave the vehicle, and leave the control unit opened. For reasons of safety the control unit must always be closed when the vehicle is moving. Inserting the KeyCard Press the button, 1. The control unit opens. Insert the KeyCard, as shown in the diagram (arrow 1), with the contact surfaces downwards. "Training" a second KeyCard / Replacing the KeyCard A second KeyCard can be "trained" as a substitute if the device is operating with the first KeyCard. If you want to "train" a second KeyCard 2 insert the first KeyCard and switch the device on. 1 3 Press the MENU button, 8. 34 THEFT PROTECTION DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Press the Press the or button, 7, until "LEARN KC" appears in the display. button, 7. Close the control unit. If necessary, switch the device off. Hold down the TUNE and ST1 buttons, > and 4, at the same time. "CHANGE" appears in the display. Remove the first KeyCard. Insert the new KeyCard. "LEARN OK" appears in the display. To leave the menu Switch the device on with the main button, 2. "0000" appears in the display. Enter the four-figure master code from the Car Radio Passport as follows: Press the MENU button, 8. The radio can now be operated with the new KeyCard. Note: Two KeyCards is the maximum that can be used with one device. If you already have two KeyCards for the device and then "train" a third KeyCard, the device can no longer be used with the KeyCard that was not involved in the training process. Enter each of the numbers for the master code using the and buttons, 7. Press this button as many times as is necessary to obtain the desired number in the display. Change the location of your input with the and buttons, 7. When the master code is correctly shown, press the OK button, 5. If the device switches to play, the new KeyCard has been accepted. KeyCard lost or damaged If all the KeyCards belonging to a device are damaged or lost, you can "train" a new KeyCard. You can obtain a new KeyCard from your dealer. In order to be able to use the new KeyCard you will require the device's master code. You will find this in the device's Car Radio Passport. The instructions for this are in the section on "Training a new KeyCard". Keep your Car Radio Passport in a safe place, but never in the car itself. Visual theft protection (LED) When the device is switched off and the KeyCard has been removed, the power button and the CD slot illumination can flash if desired. This requires the "LED" setting in the menu to be set to "ON". Press the MENU button, 8. Press the or button, 7, until either "LED ON" or "LED OFF" appears in the display. Press the Training a new KeyCard / entering the master code If you no longer have a valid KeyCard for your device, and would like to train a new KeyCard or button, 7, in order to switch between the settings ON and OFF. Press the OK button, 5, or the MENU button, 8, to leave the menu. The settings are then saved. insert the new, unknown KeyCard into the device. 35 THEFT PROTECTION Display Radio Passport Data Using the supplied KeyCard you can show the Radio Passport data such as the device name, type number (7 6 ...) and the device number in the display. SWITCHING ON AND OFF Switching on and off There are a number of methods for switching the device on or off. Press the MENU button, 8. Press the or button, 7, until "LEARN KC" appears in the display. Switching on and off with the button 2 Press the main button, 2, to switch on. The device switches on. Press the button, 7. To switch off, hold the main button, 2, pressed for longer than two seconds. The device switches off. The Radio Passport data is shown on the display as moving text. To leave the menu Press the OK button, 5, or the MENU button, 8, to leave the menu. The settings are then saved. Switching on and off with the vehicle ignition If the device is correctly connected to the vehicle ignition, and has not been switched off with the main button, 2, it is switched on and off along with the ignition. You can also switch the device on when the ignition is off. Care of the KeyCard The KeyCard can only function properly if the contacts are free from foreign particles. Avoid touching the contacts with your skin. If necessary, clean the KeyCard contacts using a lint-free cloth dipped in alcohol. Press the main button, 2. Note: In order to protect the vehicle battery, the device is automatically switched off after an hour if the vehicle ignition is off. Switching on and off with the KeyCard You can also switch the device on and off by inserting and removing the KeyCard, if the device was not previously switched off with the main button, 2. Read the chapter on "KeyCard theft protection" for information about inserting and removing the KeyCard. 36 VOLUME The volume can be adjusted in steps from 0 (off) to 66 (maximum). You can reduce the level of the volume (mute) suddenly. Press the main button, 2. "MUTE" is shown on the display. Cancelling the mute DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Adjusting the volume To increase the volume, turn the volume control to the right. Muting To reduce the volume, turn the volume control to the left. Press the main button, 2. or Adjusting the switch-on volume The volume level of the device when it is switched on can be adjusted. Turn the volume control, 3. Press the MENU button, 8. Press the button, 7, as often as is necessary for "ON VOL" to appear in the display. Muting during telephone operation If your car radio is connected to a mobile telephone, the radio is muted when the telephone is taken "off the hook". This requires the mobile telephone to be connected to the car radio as described in the fitting instructions. If, in the course of a telephone call, a traffic announcement is made, and if traffic announcements have been given priority, the traffic announcement will be played. For more information, read the section on "Traffic Information". Adjust the switch-on volume with the buttons, 7, or with the volume control. If you set a volume level below "1", "LAST VOL" will appear in the display. This means that whatever volume was in use before the device was switched off will be activated again when the device is switched on. Risk of serious injury! If the level of switch-on volume is set to maximum, the volume when switching on can be very high. If the volume was set to maximum before switching off, and the value for the switch-on volume is set to "LAST VOL", the volume when switching on can be very high. Either case can result in serious injury to hearing! Adjusting the volume for the confirmation tone (beep) With certain functions, if you hold a button pressed for longer than two seconds, for instance in order to save a station frequency to a station button, a confirmation tone, or beep, is generated. The volume level of the beep can be adjusted. Press the MENU button, 8. Press the button, 7, as often as is necessary for "BEEP" to appear in the display. Adjust the volume with the buttons, 7, or with the volume control. "0" means that the beep is off, while "9" is the maximum beep volume. Press the OK button, 5, or the MENU button, 8, to leave the menu. The settings are then saved. 37 Press the OK button, 5, or the MENU button, 8, to leave the menu. The settings are then saved. TONE AND VOLUME Tone and volume Note: You can make separate adjustments to the bass, treble and loudness for each audio source. Adjusting the left/right volume balance In order to adjust the balance, press the AUD button, 9. "BASS" appears in the display. Adjusting the bass Press the AUD button, 9. "BASS" appears in the display. or buttons, 7, in order to adjust the bass. When you have finished the adjustment Press the AUD button, 9. Press the or button, 7, as often as is necessary for "BAL" to appear in the display. Press the or buttons, 7, in order to adjust the balance between left and right. When you have finished the adjustment Press the AUD button, 9. Press the Adjusting the treble Press the AUD button, 9. "BASS" appears in the display. Adjusting the front/rear volume ratio (fader) In order to adjust the fader, press the AUD button, 9. "BASS" appears in the display. Press the or button, 7, as often as is necessary for "TREBLE" to appear in the display. Press the or buttons, 7, in order to adjust the treble. When you have finished the adjustment Press the AUD button, 9. Press the or button, 7, as often as is necessary for "FADER" to appear in the display. Loudness Loudness refers to a bass boost at low volume levels matching the ear's sensitivity. or buttons, 7, in order to adjust the balance between front and rear. When you have finished the adjustment Press the AUD button, 9. Press the TA-SOUND You can make separate adjustments to the tone and volume for traffic announcements. Press the AUD button, 9. "BASS" appears in the display. Press the or button, 7, as often as is necessary for "LOUD" to appear in the display. Hold down the softkey, 4, indicating "TA" for longer than two seconds. "TA-SOUND" appears in the display. or buttons, 7, in order to adjust the loudness. "LOUD OFF" means that the loudness function is inactive, while "LOUD 6" indicates the maximum loudness boost. When you have finished the adjustment Press the AUD button, 9. Press the Press the or button, 7, as often as is necessary for the desired parameter to appear in the display. Perform the adjustments using the or key, 7. When you have finished the adjustment Press the AUD button, 9. 38 DISPLAY You can adjust the display to its location in your vehicle and to your taste. Press the MENU button, 8. Press the or button, 7, as often as is necessary for "DIM NGHT" to appear in the display. Adjusting the viewing angle Press the MENU button, 8. Press the or button, 7, as often as is necessary for "ANGLE" to appear in the display. Adjust the brightness with the 7. key, Press the OK button, 5 or the MENU button, 8, to leave the menu. The settings are then saved. Adjust the viewing angle with the key, 7. Press the OK button, 5 or the MENU button, 8, to leave the menu. The settings are then saved. Adjusting the display brightness If your car radio has been connected as described in the fitting instructions, the display brightness will switch with the headlights. The display brightness can be set at separate levels for day and night in steps from 1 to 9. Daytime display brightness as is necessary for "DIM DAY" to appear in the display. 7. Press the OK button, 5 or the MENU button, 8, to leave the menu. The settings are then saved. 39 PORTUGUÊS ESPAÑOL Adjust the brightness with the key, SVENSKA Press the MENU button, 8. Press the or button, 7, as often NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH Adjusting the display Night-time display brightness RADIO OPERATION Radio Operation This device is equipped with an RDS radio receiver. Many of the FM stations that can be received transmit a signal in addition to the program itself that contains information such as the name of the station and the type of program (PTY). As soon as it can be received, the name of the station is shown in the display . If desired, the program type can be displayed. You may read more about this in the section on "Program Type (PTY)". Switching the RDS convenience function on and off In order to use the RDS convenience functions AF and REG press the TUNE button, >, when the radio is operating. The radio function menu is shown on the display. Press the softkey, 4, indicating "RDS". The RDS convenience functions are active if "RDS" is displayed with light and shade reversed. "REG ON" or "REG OFF" is displayed briefly when the RDS convenience functions are switched on or off. To return to the basic radio menu Switching on radio operation If the radio is in one of the other operating modes Press the TUNE button, >. press the TUNE button, >, or wait for eight seconds. The settings are then saved. Switching REG on and off In order to use the RDS convenience function REG RDS convenience function (AF, REG) The RDS convenience functions AF (alternative frequency) and REG (regional) extend the capabilities of your radio (only in FM radio operation). q AF: If the RDS convenience function has been activated, the device searches automatically in the background for the best frequency on which the set station can be received. q REG: Some stations divide their programs at certain times into regional programs with different content. The REG function prevents the car radio from switching to alternative frequencies that have a different regional program content. Note: REG must be separately activated or deactivated in the radio function menu. press the TUNE button, >, when the radio is operating. The radio function menu is shown on the display. Press the softkey, 4, indicating "REG". "REG ON" or "REG OFF" is displayed briefly when the REG function is switched on or off. To return to the basic radio menu press the TUNE button, >, or wait for eight seconds. The settings are then saved. 40 RADIO OPERATION This radio receives stations in the VHF (FM) waveband as well as MW and LW (AM) stations. Three memory levels are available for the FM waveband, and one memory level is available for each of the MW and LW bands. Six stations can be stored on each memory level. Selecting the FM memory level In order to switch between the FM memory levels You can also tune to the station manually. DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Select waveband/memory level Manual station tuning Press the or button, 7. Note: Manual station tuning is only possible if the RDS convenience function is deactivated. Browsing a chain of stations (FM only) If a station is providing several programs it is possible to browse through this "chain" of stations. press the softkey, 4, indicating "NEXT" as often as necessary for the desired memory level to be shown in the display. The memory levels are called up in the sequence FM I, FM II and FMT. Selecting the waveband In order to select one of the FM, MW or LW bands Press the or button, 7, in order to change to the next link in the station chain. press the TUNE button, >, when the radio is operating. The radio function menu is shown on the display. Note: In order to use this function, the RDS convenience function must be active. You can only change in this way to a station that you have already received once. To do this, use the Scan or Travelstore functions. Adjusting the sensitivity of the station search You can choose whether to search only for stations with strong signals, or whether weak stations should be included. Press the softkey, 4, indicating "BND" as often as necessary for the desired waveband to be shown in the display. To return to the basic radio menu Press the TUNE button, >, or wait for eight seconds. The settings are then saved. Press the MENU button, 8. Press the or button, 7, as often as is necessary for "FM-SENS" to appear in the display. The current value of the sensitivity is shown on the display. "SENS 6" indicates the maximum sensitivity for the reception of distant transmitters, and "SENS 1" indicates the lowest sensitivity. Setting the station There are a number of ways to set the station. Automatic station search Adjust the desired sensitivity with the key, 7. Press the or button, 7. The next station that can be received is tuned in. Press the OK button, 5 or the MENU button, 8, to leave the menu. The settings are then saved. 41 RADIO OPERATION Saving a station Saving a station manually Scanning through stations Scanning through available stations (radio SCAN) You can listen to short samples from all the stations that can currently be received. The length of the samples can be set, in the menu, at between 5 and 30 seconds. Starting radio SCAN To start the radio scan Choose the desired memory level from FM I, FM II, FMT or one of the other wavebands, MW or LW. Tune in the desired station as described under "Setting the station". Hold down the softkey, 4, indicating the station "ST1" - "ST6" in which the station is to be stored for longer than two seconds. press the TUNE button, >, when the radio is operating. The radio function menu is shown on the display. Saving a station automatically (Travelstore) You can also save the six strongest stations in the area automatically (FM only). This is done in the FMT memory level. Note: Any stations previously saved on this level will be deleted. In order to use the Travelstore function Press the softkey, 4, indicating "SCA". The scanning process starts. "SCAN" is shown on the display for a short time, after which the current station name or the frequency is displayed, flashing. Scanning through the preset stations You can listen to short samples from all the stations saved on the various memory levels that can currently be received. The length of the samples can be set, in the menu, to between 5 and 30 seconds. Starting preset SCAN To start the preset scan press the TUNE button, >, when the radio is operating. The radio function menu is shown on the display. Press the softkey, 4, indicating "TS". Storing starts. "T-STORE" appears in the display. When the procedure is complete, the station in memory location one on the FMT level is played. press the TUNE button, >, when the radio is operating. The radio function menu is shown on the display. Going to a preset station Select the memory level or waveband. Press the softkey, 4, indicating from "ST1" to "ST6" for the desired station. Hold down the softkey, 4, indicating "SCA" for longer than one second. The scanning process starts. "SCAN" is shown on the display for a short time. The memory levels are scanned one after another, and the memory location from "ST1" to "ST6" currently being sampled is displayed with light and shade reversed. 42 RADIO OPERATION DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Stopping the SCAN, continue listening to a station Press the softkey, 4, indicating "SCA" again. The scanning process is stopped, and the last station sampled remains active. As soon as a station of the selected type is found, the device changes over from the present station, or out of CD, cassette tape, MiniDisc or CD changer operation (depending on how the radio is equipped) to the station with the selected program type. Switching PTY on and off In order to use the PTY function Adjusting the sample duration (Scantime) Press the MENU button, 8. Press the or button, 7, as often as is necessary for "SCANTIME" to appear in the display. press the TUNE button, >, when the radio is operating. The radio function menu is shown on the display. Press the softkey, 4, indicating "PTY". When PTY is switched on, the display briefly shows the last program type that was selected. PTY appears in the display. To return to the basic radio menu Adjust the desired sampling time with the < key, 7. Press the OK button, 5 or the MENU button, 8, to leave the menu. The settings are then saved. Note: The sampling duration that is selected is also applied to the scanning in CD, tape cassette, MiniDisc and CD changer operation (depending on how the radio is equipped). press the TUNE button, >, or wait for eight seconds. The settings are then saved. Selecting the program type and starting the search Press the or button, 7. Program type (PTY) As well as the station name itself, some FM stations also supply information about the type of program being transmitted. This information can be received and displayed by your radio. Examples of these program types could be: CULTURE TRAVEL JAZZ SPORT NEWS POP ROCK CLASSICS Using the PTY function it is possible to specifically select stations transmitting a particular program type. If you have started a PTY search, but no matching station is found, the search will be continued in the background. The current program type is shown on the display. If you want to change to a different program type press the or button, 7, as often as necessary, until the desired program type is displayed. Or In order to select a saved program type, press one of the softkeys, 4, indicating "ST1" to "ST6". The selected program type is briefly displayed. In order to start the search press the or button, 7. The next receivable station with the selected program type is tuned in. 43 RADIO OPERATION Note: If no station is found with the chosen program type, a beep is sounded, and the display briefly shows "NO PTY". The tuner returns to the most recently received station. Storing the program type on the station button Adjusting HICUT Press the MENU button, 8. Press the or button, 7, as often as is necessary for "HICUT" to appear in the display. or buttons, 7, in order to adjust the HICUT. "NO HICUT" means that the function is inactive, while "HICUT 3" indicates the strongest automatic reduction of the treble and the interference. Press the Select a program type with the button, 7. or In order to save a program type, hold down one of the softkeys, 4, indicating "ST1" to "ST6", for more than one second. The program type is saved at the chosen location. Setting the PTY language You can select the language in which program types are displayed. Press the OK button, 5 or the MENU button, 8, to leave the menu. The settings are then saved. Bandwidth selection in the presence of interference (SHARX) The SHARX function provides you with the facility of eliminating interference from neighbouring stations as far as possible. Switch on the SHARX function when stations are crowded. Switching SHARX on and off Press the MENU button, 8. Press the or button, 7, as often as is necessary for "PTY LANG" to appear in the display. or button, 7, in order to switch between the languages "DEUTSCH", "ENGLISH" or "FRANCAIS". Press the Press the MENU button, 8. Press the or button, 7, as often as is necessary for "SHARX" to appear in the display. or buttons, 7, in order to switch SHARX on or off. "NO SHARX" means that the function is not active, while "SHARX ON" means that the bandwidth selection is operating automatically. Press the OK button, 5 or the MENU button, 8, to leave the menu. The settings are then saved. Press the Optimising radio reception Treble cut in the presence of interference (HICUT) The HICUT function improves the sound when radio reception is poor. When interference is being received, the treble is automatically cut, which therefore also reduces the level of interference. Press the OK button, 5 or the MENU button, 8, to leave the menu. The settings are then saved. 44 RADIO OPERATION Switching between stereo and mono When radio reception is poor you can switch the mode to mono. The changeover from stereo to mono is executed smoothly. The radio plays in stereo after being switched on. The selection of stereo or mono is made via the menu. TRAFFIC INFORMATION You car radio is equipped with an RDS-EON receiver. EON (Enhanced Other Network) stands for the broadcasting of station information within a broadcasting network. If a traffic announcement (TA) is made, your radio will tune automatically from a non-traffic-information station to a traffic-information station with the broadcasting network. The radio then reverts to the programme previously heard once the traffic announcement is over. DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Traffic Information Press the MENU button, 8. Press the or button, 7, as often as is necessary for "STEREO" or "MONO" to appear in the display. Press the or button, 7, to choose between stereo and mono. Press the OK button, 5 or the MENU button, 8, to leave the menu. The settings are then saved. Switching traffic information priority on and off Press the softkey, 4, indicating "TA". Traffic announcement priority is activated if "TA" appears with light and shade reversed. Note: You will hear a warning tone q if you leave the reception area of a traffic radio station to which you are listening, q if, when you are listening to a CD, tape cassette or MiniDisc (according to how the radio is equipped) the reception area of the selected traffic radio station, and the automatic search which then follows fails to find a new traffic radio station, q if you change from a traffic radio station to a station with no traffic information. Either switch off the traffic information priority or change over to a station with traffic information. Changing the displayed information You can select the information shown on the display. The upper display line (the headline) can display the station name, frequency or the program type. The lower display line (DOT field) can display the time or the memory level. Changing the headline Hold down the DIS button, :, until the desired information, i.e. the station name, frequency or program type, appears. Changing the DOT field Hold down the DIS button, :, for longer than one second. The display switches between time and memory level. 45 TRAFFIC INFORMATION Adjusting the volume for traffic announcements Press the MENU button, 8. Press the or button, 7, until "TA VOLUME" appears in the display. MINIDISC OPERATION MiniDisc operation You can use this equipment to play any standard MiniDisc. Adjust the volume with the 7, or with the volume control. buttons, Starting MiniDisc operation, Inserting MiniDisc q If there is no MiniDisc in the disc-drive: button, 1. Press the OK button, 5 or the MENU button, 8, to leave the menu. The settings are then saved. Press the The console opens. Gently push the MiniDisc with the printed side upwards into the drive until you feel it stop. The MiniDisc is automatically drawn into the disc-drive. This process should not be interfered with manually, neither hindered nor accelerated. Gently close the console until you feel it click into place. The MiniDisc menu appears, the disc begins to play. q If there is already a MiniDisc in the drive: Press the MD button, <. The MiniDisc menu appears and the disc begins playing exactly where it cut off. Removing MiniDisc Press the Press the button, 1. The console opens. button on the opened console. The MiniDisc ejects. Carefully remove the MiniDisc. Note: If you do not remove the MiniDisc within 30 seconds, it will be drawn back into the drive. 46 MINIDISC OPERATION Press any arrow button, 7, until the number of the track you wish to hear appears in the display. Press the or the button, 7, once to restart the track currently playing. Press the softkey, 4, indicating "RPT". "RPT TRCK" appears briefly in the display. The track is repeated until RPT is deactivated. Ending REPEAT Fast search (audible) For a fast forward or reverse search, Press softkey, 4, indicating "RPT" again. "RPT OFF" appears briefly in the display. Playing continues as normal. the fast forward or reverse search begins. Changing display contents: MD text During operation, you can choose between various display modes: q Track number and clock q Track number and playtime q MD text and playtime q MD text and clock. To switch between display modes: Random track replay (MIX) Press the softkey, 4, indicating "MIX". "MIX MiniDisc" appears briefly in the display. The next track played will be selected at random. Ending MIX Press the softkey, 4, indicating "MIX" again. "MIX OFF" appears briefly in the display. Press the DIS button, :, until the information you require appears in the display. To activate/deactivate MD text (disc name and track name): SCAN function Use this function to hear the start of each track on the MD: Hold down the DIS button, :, until ESPAÑOL PORTUGUÊS Press the softkey, 4, indicating "SCA" "SCAN" appears in the display. The start of each track is played in ascending order. Note: You can set the amount of each track played. Please read the section entitled "Setting Scantime" in the chapter entitled "Radio Operation". Ending SCAN: Continue listening "MDTXT ON" or "NO MDTXT" appears briefly in the display. Note: You can choose whether the MD text is displayed continually or just once when a new track begins or a new MD is inserted. Please read the section entitled "Scrolling MD Text". Press the softkey, 4, indicating "SCA" again The current track continues playing. 47 SVENSKA NEDERLANDS ITALIANO FRANÇAIS Hold down any arrow button, 7, until ENGLISH DEUTSCH Selecting tracks Repeating tracks MINIDISC OPERATION Scrolling MD Text You can choose whether the information stored on the MiniDisc (e.g. disc and tracks names) is displayed continually or just once when a new track begins or a new MD is inserted. Switching scrolling text on/off Select your first favourite. Press the softkey, 4, indicating "TPM" for longer than one second. "TPM PROG" appears briefly in the display. The track is added to the list of favourite tracks for that MD.