Radio / CD Alicante CD30 Kiel CD30 Lausanne CD30 Operating instructions 2 1 3 4 5 6 14 13 7 12 11 10 9 8 3 SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH PORTUGUÊS ESPAÑOL CONTROLS 1 2 Button to release the control panel FM button ­ selects the FM memory FMT button ­ Travelstore (not on the Kiel CD30) Volume control ON button ­ switches the unit on/off RDS button ­ switches the RDS function on/off M·L button ­ selects the MW and LW frequency ranges TS button ­ activates the Travelstore function on the Kiel CD30 CD compartment CD eject CD·C button ­ selects CD, radio and CD changer (if connected) sources AUDIO button ­ sets bass and treble LD button ­ switches the loudness function on/off Arrow buttons GEO button ­ sets balance and fader MENU button ­ opens the basic settings menu Buttons 1-5 TRAFFIC button ­ activates/ deactivates traffic information standby 3 4 5 6 7 8 9 : ; < = > 22 CONTENTS Road safety ................................... 24 Installation ..................................... 24 Accessories .................................. 24 Guarantee ..................................... 24 International telephone hotline ........ 24 Switching to CD mode .................. 33 Selecting a track ........................... 33 Random play (MIX) ........................ 34 Scanning tracks (SCAN) ............... 34 Setting the scantime ...................... 34 Repeating a track (REPEAT) .......... 34 Pausing playback (PAUSE) ............ 34 Changing the display ..................... 34 Traffic announcements in CD mode 35 Ejecting a CD ................................ 35 DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Important information ............ 24 CD mode ................................ 33 Theft protection ..................... 25 Removable control panel ............... 25 Theft protection CODE .................. 26 Switching on/off .................... 27 Volume adjustment ................ 27 Setting the power-on volume ......... 27 Mute setting .................................. 28 Mute while telephoning .................. 28 CD changer mode .................. 35 Switching to CD changer mode ..... 35 Selecting a CD .............................. 35 Selecting a track ........................... 35 Changing the display ..................... 35 Repeating individual tracks or whole CDs (REPEAT) .................... 36 Random play (MIX) ........................ 36 Scanning all tracks on all CDs (SCAN) ......................................... 36 Pausing playback (PAUSE) ............ 36 Radio mode ............................ 28 Switching to radio mode ................ 28 Changing the display ..................... 28 RDS functions (AF, REG) .............. 28 Selecting the frequency range / memory ......................................... 29 Tuning into a station ....................... 29 Setting the sensitivity of the station search mode ................................. 29 Storing stations ............................. 30 Storing stations automatically (Travelstore) .................................. 30 Listening to preset stations ............ 30 Programme type (PTY) .................. 30 Treble reduction feature during interference (HICUT) ..................... 31 Time (CLOCK) ........................ 37 Displaying the time ........................ 37 Setting the time manually ............... 37 Selecting 12/24-hour clock mode .. 37 Displaying the time when the unit is off .............................................. 37 Audio settings ........................ 38 Switching loudness on/off ............. 38 Traffic information reception . 32 Switching traffic information priority on/off ............................................ 32 Setting the traffic announcement volume .......................................... 32 Switching off the warning sound .... 33 Volume distribution settings .. 38 Balance settings ............................ 38 Fader settings ............................... 38 External audio sources .......... 39 Technical data ........................ 39 23 IMPORTANT INSTRUCTIONS Important information Before using your car radio, please read these instructions carefully and familiarise yourself with the unit. Keep these instructions in your vehicle for later reference. CD changer You can connect the following Blaupunkt CD changers: CDC A 06, CDC A 08, CDC A 072 and IDC A 09. You can also connect the CDC A 05 and CDC A 071 CD changers by using a special adapter cable (Blaupunkt no.: 7 607 889 093). Road safety Road safety has priority. Only operate your car radio if the road and traffic conditions allow you to do so. Familiarise yourself with the unit before setting off on your journey. You should always be able hear police, fire and ambulance sirens from afar. For this reason, set your car radio's volume to a suitable level. Guarantee The scope of the guarantee is orientated around the regulations in force within the country in which the unit was purchased. Regardless of what the legal regulations may stipulate, Blaupunkt provides a twelve-month guarantee. If you have any questions regarding the guarantee, please contact your authorised Blaupunkt dealer. The purchase receipt is accepted as proof of guarantee in all cases. Installation If you want to install your car radio yourself, read the installation and connection instructions that follow these operating instructions. Accessories Only use accessories approved by Blaupunkt. Remote control The optional RC 08 remote control allows you to safely access the most important functions from your steering wheel. Amplifier All Blaupunkt amplifiers can be used. International telephone hotline If you have any questions regarding the operation of your car radio or if you require further information, please do not hesitate to call us! The information hotline numbers are printed on the last page of these instructions. 24 THEFT PROTECTION 1 Removable control panel As a way of protecting your car radio against theft, the unit is equipped with a removable control panel (release panel). Without this control panel, the car radio is worthless to a thief. Protect you car radio against theft by taking the control panel with you every time you leave your vehicle. Do not leave the control panel in your vehicle ­ not even in a hiding place. The control panel has been designed to be easy to use. Note: q Never drop the control panel. q Never expose the control panel to direct sunlight or other heat sources. q Protect the control panel against moisture. q Store the control panel in the supplied case. q If the unit was still switched on when you removed the control panel, the unit will automatically switch on with the last settings activated (i.e. radio, CD or CD changer mode) when the panel is replaced. Removing the control panel DEUTSCH Theft protection First, pull the control panel straight off the unit and then out towards the left. The unit switches off after the control panel is removed. The current settings are saved. Any CD already inserted in the unit remains there. q q q Attaching the control panel right into the unit's panel locking mechanism. Press the left-hand edge of the control panel into the unit until it clicks into place. Press button 1. The control panel locking mechanism opens. Note: q When attaching the control panel, make sure you do not press the display. 25 PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS Slide the control panel from left to ITALIANO FRANÇAIS ENGLISH THEFT PROTECTION Theft protection CODE As a way of protecting your car radio against theft, the system features a fourdigit code.You have to enter this number every time the unit is disconnected from your vehicle's electrical power supply. As a factory default, the code entry request function is deactivated. However, you do have the option of activating this function. The numerical code is printed on the pass card supplied with your unit. Note: Never keep your radio's pass card in your vehicle! Activating/deactivating the code In order to activate/deactivate the code request function, proceed as follows: Note: To prevent unauthorised persons from deactivating the code, you will have to enter the numerical code in order to deactivate the code request function. Entering the code Switch on the unit. "CODE" appears in the display first of all and is followed by four zeros. Keep pressing station button 1 = until the first number of your code appears in the display. Keep pressing station button 2 = until the second number of your code appears in the display. Keep pressing station button 3 = until the third number of your code appears in the display. Press the ON button 4 to switch off the unit. Keep pressing station button 4 = until the fourth number of your code appears in the display. Press station buttons 1 and 4 = at the same time. Keep these station buttons pressed while switching the unit on by pressing the ON button 4. Once the correct code is displayed, press the or button :. Note: If the code is entered incorrectly three times, you will have to wait for a fixed time period. "WAIT 1 H" appears in the display. The unit must remain switched on during this hour. Keep station buttons 1 and 4 = pressed until "PUNKT" appears in the display. Release the station buttons. The code request function is now activated. Follow the same procedure to deactivate the code request function. 26 SWITCHING ON/OFF Switching on/off There are various ways of switching the unit on/off. q Switching on/off using the vehicle ignition. If the unit is correctly connected to the vehicle's ignition, it will switch on/off simultaneously with the ignition. You can also switch the unit on even if the ignition is off. VOLUME ADJUSTMENT The system volume can be adjusted in steps from 0 (off) to 66 (maximum). DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Volume adjustment To increase the system volume, turn the volume control 3 to the right. To decrease the system volume, turn the volume control 3 to the left. To do so, press button 4 until the unit turns on. Note: To protect the vehicle battery, the unit will switch off automatically after one hour. q Switching on/off using the removable control panel. Setting the power-on volume You can set the unit's default power-on volume. Pressing the MENU < button. Press the : button. "ON VOLUME" appears in the display. Set the power-on volume using the and buttons :. To assist you in setting the power-on volume, the volume will change in response to the changes you make. If you set the power-on volume to 0: every time you turn the unit on, the power-on volume will be the same as the volume level that was set before the unit was last switched off. Risk of serious injury. If the power-on volume is set to maximum, the volume level can be very high when the unit is switched on. If the volume was set to maximum before the unit was switched off and the power-on volume is set to 0, the volume level can be very high when the unit is switched on again. This can cause hearing damage. 27 Remove the control panel. The unit switches off. Attach the control panel again. The unit switches on. The settings (radio, CD or CD changer) that were set before the unit was switched off will be reactivated. q Switching on/off using button 4. To switch the unit on, press button 4. To switch the unit off, press button 4 for longer than two seconds. VOLUME ADJUSTMENT When you have finished making your changes, press the MENU button <. RADIO MODE Radio mode This unit is equipped with an RDS radio receiver. Nearly all receivable FM stations transmit a signal that not only carries the programme but also additional information such as the station name and programme type (PTY). The station name appears in the display as soon as it is received. The programme type can be displayed if required. Read the section entitled "Programme Type (PTY)" for further details. Mute setting This feature allows you to instantaneously reduce the system volume (mute). Press button 4. Setting the mute level You can set the unit's mute level. Pressing the MENU < button. Keep pressing the button : until "MUTE LEVEL" appears in the display. Switching to radio mode If you are in CD or CD changer mode: Set the mute level using the buttons :. and Keep pressing the CD·C button 8 until "RADIO" appears in the display. When you have finished making your changes, press the MENU button <. Changing the display To briefly display the time, press the MENU button < until the time appears in the display. Mute while telephoning If your car radio is connected to a mobile telephone, the unit's volume will be muted as soon as you "pick up" the telephone. In order for this to work, the mobile telephone has to be connected to the car radio in the manner described in the installation instructions. If ...