Radio / CD Heidelberg CD50 Operating instructions 1 2 3 4 16 15 5 6 14 7 13 12 11 10 8 9 3 PORTUGUÊS ESPAÑOL FRANÇAIS ENGLISH OPERATING ELEMENTS 1 2 3 4 button to unlock release panel Volume control ON button, switches the unit on/off, mute RDS button, switches the RDS function on/off Selects display for variable text FM button, selects the FM waveband and the FM memory bank TS, starts the TravelStore function Display button, displays the time DIS, changes display contents MENU button, accesses the menu for basic settings button, opens the flip release panel Cursor button block OK button, confirms menu selections and starts the SCAN function DEQ button, adjusts the equalizer AUD button, adjusts bass, treble, balance and fader LD, switches the Loudness function on/off 1 to 6 station buttons AM button, selects the AM waveband CD·C button, switches sound source between radio, CD player and CD changer (if connected) 5 6 7 8 9 : ; < = > ? @ 4 CONTENTS Traffic safety .................................... 6 Installation ....................................... 6 Accessories .................................... 6 Guarantee ....................................... 6 International telephone information ... 6 ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Important information .............. 6 Removable front panel ............. 7 Switching the car audio system on/off........................... 8 Volume control ......................... 9 Adjusting the power-on volume ........ 9 Mute ............................................... 9 Telephone audio/Navigation audio .... 9 Adjusting the volume of the beep ... 10 Playing tracks in random order (MIX) ............................................. 14 Scanning tracks (SCAN) ............... 14 Repeating individual tracks (REPEAT) ...................................... 15 Interrupting playback (PAUSE) ...... 15 Switching the display mode ........... 15 Naming CDs ................................. 15 Removing the CD .......................... 16 CD changer operation ............ 16 Starting CD changer operation ...... 16 Selecting CDs ............................... 16 Selecting tracks ............................ 16 Audible fast forward/reverse (CUE/REVIEW) ............................. 16 Switching the display mode ........... 16 Repeating individual tracks or entire CDs (REPEAT) .................... 17 Playing tracks in random order (MIX) ............................................. 17 Scanning all of the tracks on all of the CDs (SCAN) ....................... 17 Interrupting playback (PAUSE) ...... 17 Naming CDs ................................. 18 Radio operation...................... 10 Switching to the radio mode .......... 10 RDS function ................................. 10 Selecting the waveband/ memory bank ................................. 10 Tuning into radio stations ............... 11 Adjusting seek tuning sensitivity ..... 11 Storing radio stations ..................... 11 Storing radio stations automatically (TravelStore) .................................. 11 Recalling stored radio stations ....... 12 Scanning the radio stations within reception range (SCAN) ................ 12 Adjusting the scan time ................. 12 Optimising radio reception ............. 12 Selecting the display of variable text ................................................ 13 Adjusting the tuner ........................ 13 Clock ...................................... 19 Adjusting the tone and balance/fader ........................ 20 Switching Loudness on/off .... 21 Equalizer ................................ 21 Notes on making equalizer settings . 21 Switching the equalizer on/off ........ 22 Adjusting the equalizer ................... 22 Adjusting the spectrometer ............ 22 Assistance in setting your equaliser . 23 CD player operation ............... 14 Starting CD player operation ......... 14 Selecting tracks ............................ 14 Audible fast forward/reverse (CUE/REVIEW) ............................. 14 External audio sources .......... 24 Specifications ........................ 24 Installation instructions .......... 92 5 IMPORTANT INFORMATION Important information Before you use your car audio system for the first time, please take the time to read the instruction manual carefully and make yourself familiar with the audio equipment. Keep this manual handy in your car for future reference. system functions from the steering wheel. Amplifiers All Blaupunkt amplifiers can be used. CD changers The following CD changers can be connected directly: CDC A 06, CDC A 08, CDC A 072 and IDC A 09. The CDC A 05 and CDC A 071 can be connected with an adapter cable (Blaupunkt no. 7 607 889 093). Traffic safety Traffic safety is always the top priority. Do not attempt to operate your car audio system unless the traffic conditions permit. Familiarize yourself with the equipment before you start driving. Always make sure that you are still able to hear any warning signals coming from outside the vehicle, such as police or fire engine sirens, at all times. As a result, please always select a moderate volume for playing your car audio system while you are driving. Guarantee The scope of the guarantee is determined by the laws in the country where the unit is purchased. Regardless of the legal guarantee regulations, Blaupunkt affords a 12-month guarantee. If you have any questions about the guarantee, please contact your authorised Blaupunkt dealer. Your cash register receipt is a valid guarantee coupon. Installation If you would like to install your new car stereo yourself or add other audio components to the existing ones, then please read the instructions on installation and connection at the end of this manual carefully. International telephone information Have you got any questions on the operation of this equipment or do you require more information? Give us a call! You will find the international telephone and fax numbers on the last page of this manual. Accessories Use only Blaupunkt-approved accessories. Remote control unit The optionally available RC 08 infrared remote control unit allows you to conveniently operate the most important 6 REMOVABLE FRONT PANEL Theft protection system To prevent your car audio system from being stolen, it has been equipped with a removable front panel (flip release panel). Without the front panel, the car audio system is useless to thieves. Protect your car audio system against theft and take the operating panel with you each time you leave the vehicle. Never leave the release panel in the car, even if it is well hidden. The panel has been designed so that it is easy to remove. Notes: q Do not drop the release panel. q Do not expose the release panel to direct sunlight or other heat sources. q Store the release panel in the case supplied. q q guides from left to right. Press the left-hand side of the panel onto the car audio system until it locks into place. Removing the operating panel Press 1. The release panel will unlock. 1 Note: q While replacing the panel, be careful not to press on the display. If the car audio system was on when you removed the panel, it will automatically switch back on using the same settings when you replace it (radio, CD player or CD changer). First pull the operating panel forward and then slide it to the left to remove it. 7 PORTUGUÊS ESPAÑOL Replacing the operating panel Slide the operating panel into the FRANÇAIS ENGLISH Removable front panel q When you remove the operating panel, the car audio system will automatically switch off. All of the settings will remain stored. A CD inserted into the car audio system will remain in place. SCHWITCHING ON/OFF Switching the car audio system on/off The car audio system can be switched on/off in a number of ways. Switching the car audio system on/ off with the ignition If the car audio system has been connected to your vehicle ignition, it is possible to switch it on and off with the ignition. You can also switch the car audio system on when the ignition is switched off. Switching the car audio system on by inserting a CD If the system is switched off and there is no CD in the CD player, press 9. The flip release panel will open. Insert the CD into the CD player with the label facing up until you feel slight resistance. Do not use force. The CD will be pulled automatically into the CD player. Do not attempt to assist or prevent this process. Press down and hold 3 until the car audio system switches on. Note: To prevent the car battery from running down, the radio will switch off again automatically after one hour. Switching the car audio system on/ off with the removable front panel Press the operating panel closed gently until you feel it click into place. The audio system will switch on. CD playback will begin. Remove the release panel. The car audio system will switch off. Replace the release panel. The car audio system will switch on again. The last settings used (radio, CD player or CD changer) will be activated. Switching the car audio system on/ off by pressing 3 Press 3 to switch the car audio system on. Press 3 for longer than 2 seconds to switch the car audio system off again. The system will then switch off. 8 VOLUME CONTROL The car audio system volume can be adjusted to levels from 0 (off) to 66 (maximum). You can reduce the volume of the car audio system immediately (mute). ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Volume control Mute Press 3 briefly. "MUTE" will appear in the display. Selecting the mute level It is possible to select the mute level. To increase the volume, turn the volume control knob 2 to the right. To decrease the volume, turn the volume control knob 2 to the left. Adjusting the power-on volume It is possible to adjust the volume at which the car audio system switches on. Press MENU 8. Press : repeatedly until "MUTE LEVEL" appears in the display. Press level. : to select the mute Press MENU 8. Press : repeatedly until "ON VOLUME" appears in the display. : to adjust the volume. If you adjust this setting to "0", the car audio system will switch on at the volume used before it was switched off. Once you have made your selection, press MENU 8 or OK ;. Press Telephone audio/Navigation audio If your car audio system is equipped with a mobile telephone or a navigation system, it will automatically switch to mute when you use the phone or when voice output from the navigation system is emitted. The car speakers will then be used for the phone call or the voice output. This will not work unless the mobile phone or the navigation system is connected to the car audio system as described in the installation instructions. To find out which navigation systems can be used with your car radio, contact a Blaupunkt specialist dealer. The volume at which phone calls or navigation voice output are heard can be adjusted. Warning of serious injury If the power-on volume is set to the maximum level, it may be extremely loud when the car audio system is switched on. If the power-on volume is set to 0 and the car audio system was played at maximum volume before it was switched off, it may be extremely loud when the car audio system is switched back on. This could result in serious injury to your ears! Once you have selected the desired settings, press MENU 8 or OK ;. Press MENU 8. Press : repeatedly until "TEL/ NAVI VOL" appears in the display. 9 VOLUME CONTROL Press : to select the desired volume level. tion, press MENU 8 or OK ;. RADIO OPERATION Radio operation Switching to the radio mode If you are currently using the CD player or CD changer, Once you have made your selecAdjusting the volume of the beep For a number of functions you will hear a beep if you press a key for longer than 2 seconds, e.g. if you want to store a radio station on a station preset.You can adjust the volume level of this beep. press CD·C @ repeatedly until "RADIO" appears in the display. RDS function This car audio system has been equipped with an RDS radio receiver. Many FM radio stations now transmit a signal which contains such other information as the station name along with their regular programming. As soon as the radio station name is detected, it will appear in the display. The RDS function can be switched on or off. Switching the RDS function on/off Press MENU 8. Press : repeatedly until "BEEP" appears in the display. Press : to adjust the volume. "0" means the beep volume is off, "9" means the beep volume is adjusted to the maximum volume. To take advantage of the RDS function, press RDS 4. When the RDS function has been activated, the RDS symbol will light up in the display. Once you have adjusted the settings, press MENU 8 or OK ;. Selecting the waveband/ memory bank The car audio system is able to receive FM and AM radio programs. There are three memory banks for the FM waveband and one memory bank for the AM ...