User manual BLAUPUNKT LAUSANNE CD30

Radio / CD Alicante CD30 Kiel CD30 Lausanne CD30 Operating instructions 2 1 3 4 5 6 14 13 7 12 11 10 9 8 3 SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH PORTUGUÊS ESPAÑOL CONTROLS 1 2 Button to release the control panel FM button ­ selects the FM memory FMT button ­ Travelstore (not on the Kiel CD30) Volume control ON button ­ switches the unit on/off RDS button ­ switches the RDS function on/off M·L button ­ selects the MW and LW frequency ranges TS button ­ activates the Travelstore function on the Kiel CD30 CD compartment CD eject CD·C button ­ selects CD, radio and CD changer (if connected) sources AUDIO button ­ sets bass and treble LD button ­ switches the loudness function on/off Arrow buttons GEO button ­ sets balance and fader MENU button ­ opens the basic settings menu Buttons 1-5 TRAFFIC button ­ activates/ deactivates traffic information standby 3 4 5 6 7 8 9 : ; < = > 22 CONTENTS Road safety ................................... 24 Installation ..................................... 24 Accessories .................................. 24 Guarantee ..................................... 24 International telephone hotline ........ 24 Switching to CD mode .................. 33 Selecting a track ........................... 33 Random play (MIX) ........................ 34 Scanning tracks (SCAN) ............... 34 Setting the scantime ...................... 34 Repeating a track (REPEAT) .......... 34 Pausing playback (PAUSE) ............ 34 Changing the display ..................... 34 Traffic announcements in CD mode 35 Ejecting a CD ................................ 35 DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Important information ............ 24 CD mode ................................ 33 Theft protection ..................... 25 Removable control panel ............... 25 Theft protection CODE .................. 26 Switching on/off .................... 27 Volume adjustment ................ 27 Setting the power-on volume ......... 27 Mute setting .................................. 28 Mute while telephoning .................. 28 CD changer mode .................. 35 Switching to CD changer mode ..... 35 Selecting a CD .............................. 35 Selecting a track ........................... 35 Changing the display ..................... 35 Repeating individual tracks or whole CDs (REPEAT) .................... 36 Random play (MIX) ........................ 36 Scanning all tracks on all CDs (SCAN) ......................................... 36 Pausing playback (PAUSE) ............ 36 Radio mode ............................ 28 Switching to radio mode ................ 28 Changing the display ..................... 28 RDS functions (AF, REG) .............. 28 Selecting the frequency range / memory ......................................... 29 Tuning into a station ....................... 29 Setting the sensitivity of the station search mode ................................. 29 Storing stations ............................. 30 Storing stations automatically (Travelstore) .................................. 30 Listening to preset stations ............ 30 Programme type (PTY) .................. 30 Treble reduction feature during interference (HICUT) ..................... 31 Time (CLOCK) ........................ 37 Displaying the time ........................ 37 Setting the time manually ............... 37 Selecting 12/24-hour clock mode .. 37 Displaying the time when the unit is off .............................................. 37 Audio settings ........................ 38 Switching loudness on/off ............. 38 Traffic information reception . 32 Switching traffic information priority on/off ............................................ 32 Setting the traffic announcement volume .......................................... 32 Switching off the warning sound .... 33 Volume distribution settings .. 38 Balance settings ............................ 38 Fader settings ............................... 38 External audio sources .......... 39 Technical data ........................ 39 23 IMPORTANT INSTRUCTIONS Important information Before using your car radio, please read these instructions carefully and familiarise yourself with the unit. Keep these instructions in your vehicle for later reference. CD changer You can connect the following Blaupunkt CD changers: CDC A 06, CDC A 08, CDC A 072 and IDC A 09. You can also connect the CDC A 05 and CDC A 071 CD changers by using a special adapter cable (Blaupunkt no.: 7 607 889 093). Road safety Road safety has priority. Only operate your car radio if the road and traffic conditions allow you to do so. Familiarise yourself with the unit before setting off on your journey. You should always be able hear police, fire and ambulance sirens from afar. For this reason, set your car radio's volume to a suitable level. Guarantee The scope of the guarantee is orientated around the regulations in force within the country in which the unit was purchased. Regardless of what the legal regulations may stipulate, Blaupunkt provides a twelve-month guarantee. If you have any questions regarding the guarantee, please contact your authorised Blaupunkt dealer. The purchase receipt is accepted as proof of guarantee in all cases. Installation If you want to install your car radio yourself, read the installation and connection instructions that follow these operating instructions. Accessories Only use accessories approved by Blaupunkt. Remote control The optional RC 08 remote control allows you to safely access the most important functions from your steering wheel. Amplifier All Blaupunkt amplifiers can be used. International telephone hotline If you have any questions regarding the operation of your car radio or if you require further information, please do not hesitate to call us! The information hotline numbers are printed on the last page of these instructions. 24 THEFT PROTECTION 1 Removable control panel As a way of protecting your car radio against theft, the unit is equipped with a removable control panel (release panel). Without this control panel, the car radio is worthless to a thief. Protect you car radio against theft by taking the control panel with you every time you leave your vehicle. Do not leave the control panel in your vehicle ­ not even in a hiding place. The control panel has been designed to be easy to use. Note: q Never drop the control panel. q Never expose the control panel to direct sunlight or other heat sources. q Protect the control panel against moisture. q Store the control panel in the supplied case. q If the unit was still switched on when you removed the control panel, the unit will automatically switch on with the last settings activated (i.e. radio, CD or CD changer mode) when the panel is replaced. Removing the control panel DEUTSCH Theft protection First, pull the control panel straight off the unit and then out towards the left. The unit switches off after the control panel is removed. The current settings are saved. Any CD already inserted in the unit remains there. q q q Attaching the control panel right into the unit's panel locking mechanism. Press the left-hand edge of the control panel into the unit until it clicks into place. Press button 1. The control panel locking mechanism opens. Note: q When attaching the control panel, make sure you do not press the display. 25 PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS Slide the control panel from left to ITALIANO FRANÇAIS ENGLISH THEFT PROTECTION Theft protection CODE As a way of protecting your car radio against theft, the system features a fourdigit code.You have to enter this number every time the unit is disconnected from your vehicle's electrical power supply. As a factory default, the code entry request function is deactivated. However, you do have the option of activating this function. The numerical code is printed on the pass card supplied with your unit. Note: Never keep your radio's pass card in your vehicle! Activating/deactivating the code In order to activate/deactivate the code request function, proceed as follows: Note: To prevent unauthorised persons from deactivating the code, you will have to enter the numerical code in order to deactivate the code request function. Entering the code Switch on the unit. "CODE" appears in the display first of all and is followed by four zeros. Keep pressing station button 1 = until the first number of your code appears in the display. Keep pressing station button 2 = until the second number of your code appears in the display. Keep pressing station button 3 = until the third number of your code appears in the display. Press the ON button 4 to switch off the unit. Keep pressing station button 4 = until the fourth number of your code appears in the display. Press station buttons 1 and 4 = at the same time. Keep these station buttons pressed while switching the unit on by pressing the ON button 4. Once the correct code is displayed, press the or button :. Note: If the code is entered incorrectly three times, you will have to wait for a fixed time period. "WAIT 1 H" appears in the display. The unit must remain switched on during this hour. Keep station buttons 1 and 4 = pressed until "PUNKT" appears in the display. Release the station buttons. The code request function is now activated. Follow the same procedure to deactivate the code request function. 26 SWITCHING ON/OFF Switching on/off There are various ways of switching the unit on/off. q Switching on/off using the vehicle ignition. If the unit is correctly connected to the vehicle's ignition, it will switch on/off simultaneously with the ignition. You can also switch the unit on even if the ignition is off. VOLUME ADJUSTMENT The system volume can be adjusted in steps from 0 (off) to 66 (maximum). DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Volume adjustment To increase the system volume, turn the volume control 3 to the right. To decrease the system volume, turn the volume control 3 to the left. To do so, press button 4 until the unit turns on. Note: To protect the vehicle battery, the unit will switch off automatically after one hour. q Switching on/off using the removable control panel. Setting the power-on volume You can set the unit's default power-on volume. Pressing the MENU < button. Press the : button. "ON VOLUME" appears in the display. Set the power-on volume using the and buttons :. To assist you in setting the power-on volume, the volume will change in response to the changes you make. If you set the power-on volume to 0: every time you turn the unit on, the power-on volume will be the same as the volume level that was set before the unit was last switched off. Risk of serious injury. If the power-on volume is set to maximum, the volume level can be very high when the unit is switched on. If the volume was set to maximum before the unit was switched off and the power-on volume is set to 0, the volume level can be very high when the unit is switched on again. This can cause hearing damage. 27 Remove the control panel. The unit switches off. Attach the control panel again. The unit switches on. The settings (radio, CD or CD changer) that were set before the unit was switched off will be reactivated. q Switching on/off using button 4. To switch the unit on, press button 4. To switch the unit off, press button 4 for longer than two seconds. VOLUME ADJUSTMENT When you have finished making your changes, press the MENU button <. RADIO MODE Radio mode This unit is equipped with an RDS radio receiver. Nearly all receivable FM stations transmit a signal that not only carries the programme but also additional information such as the station name and programme type (PTY). The station name appears in the display as soon as it is received. The programme type can be displayed if required. Read the section entitled "Programme Type (PTY)" for further details. Mute setting This feature allows you to instantaneously reduce the system volume (mute). Press button 4. Setting the mute level You can set the unit's mute level. Pressing the MENU < button. Keep pressing the button : until "MUTE LEVEL" appears in the display. Switching to radio mode If you are in CD or CD changer mode: Set the mute level using the buttons :. and Keep pressing the CD·C button 8 until "RADIO" appears in the display. When you have finished making your changes, press the MENU button <. Changing the display To briefly display the time, press the MENU button < until the time appears in the display. Mute while telephoning If your car radio is connected to a mobile telephone, the unit's volume will be muted as soon as you "pick up" the telephone. In order for this to work, the mobile telephone has to be connected to the car radio in the manner described in the installation instructions. If a traffic announcement is received during a telephone call and traffic information priority has been activated, the traffic announcement will be played. For further details, read the chapter entitled "Traffic information reception". The volume will be muted according to the set mute level. RDS functions (AF, REG) The RDS functions ­ AF (Alternative Frequency) and REG (Regional) ­ extend your radio's range of functions. q AF: If this RDS function is activated, the unit automatically carries out a background search for the best receivable frequency for the station that is currently set. q REG: Some radio stations set aside some of their broadcasting time for regional programmes that provide different regional content. You can use the REG function to prevent the car radio from switching to alternative frequencies that 28 RADIO MODE Press the M·L 6 button to switch between the MW and LW memory levels. DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH are transmitting different programmes. Note: REG has to be additionally activated/ deactivated in the unit's menu. Switching REG on/off Selecting the MW and LW memory Tuning into a station There are various methods available for tuning into a station. Automatic station search mode Press the MENU button <. Keep pressing the button : until "REG" followed by "ON" or "OFF" appears in the display. To switch REG on/off, press the or button :. Press the or button :. The unit tunes into the next receivable station. Setting the sensitivity of the station search mode You can configure the radio to only tune into stations with a strong reception or to also tune into those with a weak reception. Press the MENU button <. Switching the RDS function on/off To use the RDS functions (AF and REG), press the RDS button 5. The RDS functions are active when "RDS" lights up in the display. When the RDS functions are switched on, "REG ON" or "REG OFF" appears briefly in the display. Press the MENU button <. Keep pressing the : button until "SENS" appears in the display. button :. The display shows the currently set value for sensitivity. "SENS HI6" means that the tuner is highly sensitive. "SENS LO1" means it is set to the lowest sensitivity setting. If "SENS LO" is selected, "lo" lights up in the display. Selecting the frequency range / memory This unit can receive programmes broadcast over the UKW (FM), MW and LW frequency ranges (MW and LW are not available on the Kiel C30). There are three preset memory levels for the FM range and one for each of the MW and LW ranges. Five stations can be stored on each memory level. Selecting the UKW (FM) memory Press the Set the required sensitivity using the and buttons :. When you have finished making your changes, press the MENU button <. Press the FMT or FM 2 button to switch between the various UKW memory levels. 29 RADIO MODE Tuning into stations manually You can also tune into stations manually. Storing stations automatically (Travelstore) You can automatically store the five stations with the strongest reception in the region (only FM). The stations are stored in the FMT memory. Note: Stations that were previously stored in this memory are deleted in the process. Press either the or button :. Note: You can only tune into stations manually if the RDS function is first deactivated. Browsing through broadcasting networks (only FM) If a radio station provides several programmes, you have the option of browsing through its so-called "broadcasting network". Keep the FMT button 2 pressed for longer than two seconds or briefly press the TS button 6 on the Kiel CD30. The automatic station storing procedure begins. "T-STORE" appears in the display. After the process is completed, the station stored in FMT memory location 1 will be played. Press the or button : to move to the next station on the broadcasting network. Note: If you want to use this feature, the RDS function must first be activated. You will then only be able to switch to stations that you have received once already. To do so, use the Travelstore function or allow the automatic station search function to run once through the entire frequency range. Listening to preset stations Select the memory in which the station was stored. Press the preset station button of the station you want to listen to. Programme type (PTY) Besides transmitting the station name, some FM stations also provide information on the type of programme they are broadcasting. For example, the programme types can be: CULTURE TRAVEL JAZZ SPORT NEWS POP ROCK CLASSICS Using the PTY function, you can directly select stations of a particular programme type. Storing stations Storing stations manually Select the required memory (i.e. FM1, FM2 or FMT (only for FM)) or select the required frequency range. Tune into the station. Press one of the station buttons 15 = for longer than one second to store the station to that button. 30 RADIO MODE As soon as a station is received corresponding to the programme type you have selected, the radio unit automatically switches to that station from the currently tuned station or from CD mode / CD changer mode. Switching PTY on/off Note: If no station is found that corresponds to the selected programme type, you will hear a beep sound and "NO PTY" appears briefly in the display. The station that was listened to last will then automatically be tuned into again. Storing a programme type on a station button DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Press the MENU button <. "MENU" appears in the display. Keep pressing the button : until "PTY ON" or "PTY OFF" appears in the display. Select a programme type using the or button :. Press the required button 1 - 5 = until you hear a beep sound. The programme type is now stored on the station button 1 - 5 = you selected. Selecting the PTY language You can set the language in which you want the programme type to appear. Press the or button : to switch PTY on (ON) or off (OFF). Press the MENU button <. Selecting a programme type and starting a search Press the or button :. Press the MENU button <. "MENU" appears in the display. The current programme type appears in the display. If you want to select another programme type you can do so by pressing the or button : whilst in this display. Or Keep pressing the button : until "PTY LANG" appears in the display. or button : to select German, English or French. appears in the display, press the MENU button <. Press the Press one of the buttons 1-5 = to select a programme type that is stored on one of these buttons. The selected programme type is displayed briefly. When the language you require Treble reduction feature during interference (HICUT) The hicut function improves the sound during poor radio reception. If interference occurs, the treble is automatically reduced. Press the or button : to start the search. The next station corresponding to your selected programme type will be tuned into. 31 RADIO MODE Switching hicut on/off TRAFFIC INFORMATION Traffic information reception Switching traffic information priority on/off Press the TRAFFIC button >. Priority for traffic announcements is activated when "TRAFFIC" lights up in the display. Note: You will hear a warning sound: q if you leave the reception area of a traffic information station that you are currently listening to. q if, while listening to a CD, you leave the reception area of a traffic information station that you are tuned into and the subsequent automatic search cannot find a new traffic information station. q if you retune the radio from a traffic information station to a station that does not broadcast traffic information. If you hear the warning sound, you can either switch off traffic information priority or tune into a station that broadcasts traffic information. Press the MENU button <. "MENU" appears in the display. Keep pressing the button : until "HICUT" appears in the display. or button : to switch HICUT on/off. "HICUT 0" means that treble will not be reduced; "HICUT 1" means that treble will be reduced. Press the Press the MENU button <. Setting the traffic announcement volume Press the MENU button <. Press the button : until "TA VOLUME" appears in the display. Set the required announcement volume using the :. 32 and buttons TRAFFIC INFORMATION When you have finished making your changes, press the MENU button <. CD MODE You can use this unit to play standard CDs with a diameter of 12 cm. Risk of damage to CD drive! So-called "CD singles" with a diameter of 8 cm and contoured CDs ("shape CDs") are not suitable for playback in this unit. We accept no liability for any damage to the CD drive that may occur as a result of the use of unsuitable CDs. DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH CD mode Switching off the warning sound Press the MENU button <. "MENU" appears in the display. Press the button : until "BEEP ON" appears in the display. button :. Press the The display changes to "BEEP OFF". Press the MENU button <. Switching to CD mode q If no CD is inserted in the drive. Gently insert the CD with the printed side uppermost into the CD compartment until you feel some resistance. The CD will be drawn automatically into the drive. Do not use force when inserting the CD. You must not hinder or assist the drive as it draws the CD in. Once inserted, CD playback begins immediately. q If a CD is already inserted in the drive. Press the CD·C button 8 until "CD" appears in the display. Playback begins from the point at which it was last interrupted. Selecting a track Press the or button : to select the next or previous track. If the button : is pressed once, the current track will be heard again from the beginning. 33 CD MODE Random play (MIX) Press button 4 (MIX) =. MIX lights up in the display. The next randomly selected track will then be played. Stopping MIX Repeating a track (REPEAT) If you want to repeat a track, press button 3 (RPT) =. RPT appears in the display. The track is repeated until you deactivate RPT. Stopping REPEAT Press button 4 (MIX) = again. MIX disappears from the display. If you want to stop the repeat function, press button 3 (RPT) = again. RPT disappears. Normal playback is then continued. Scanning tracks (SCAN) You can briefly play all the tracks on a CD. Press button 5 (SCAN) =. Note: You can set the scanning time. Stopping SCAN and continuing playback Pausing playback (PAUSE) Press button 2 =. "PAUSE" appears in the display. Cancelling pause Press button 2 To stop scanning, press button 5 (SCAN) = again. The current track will then continue to be played. = while in pause mode. Playback is continued. Changing the display To change the display between CD number and playing time: Setting the scantime Press the MENU button <. "MENU" appears in the display. Press the MENU button <. "MENU" appears in the display. Keep pressing the button : until "CDC DISP" appears in the display. Keep pressing the button : until "SCANTIME" appears in the display. the and buttons :. Set the required scantime using When you have finished making your changes, press the MENU button <. Press the button :. The current setting is displayed. "TIME" stands for the playing time and "CD NO" for the CD number display. Selected the required setting using the button :. Press the MENU button <. 34 CD MODE Traffic announcements in CD mode If you want to receive traffic announcements whilst listening to a CD, press the TRAFFIC button >. Traffic announcement priority is active when TRAFFIC lights up in the display. CD CHANGER MODE Note: Information on handling CDs, inserting CDs and operating the CD changer can be found in the operating instructions accompanying your CD changer. DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH CD changer mode Ejecting a CD To remove a CD from the unit: Switching to CD changer mode Keep pressing the CD·C button 8 until "CHANGER" appears in the display. Playback is started using the first CD that the CD changer detects. Press the CD·C button 8 until the CD is ejected. You must not hinder or assist the drive while it is ejecting the CD. If you do not remove the CD from the compartment within 20 seconds, the CD will be automatically drawn back into the unit. Selecting a CD To move up/down from one CD to another, press the or button : (on the rocker switch) once or several times. Selecting a track To move up/down from one track to another on the current CD, press the or button : once or several times. Changing the display To change the display between CD number and playing time: Press the MENU button <. "MENU" appears in the display. Keep pressing the button : until "CDC DISP" appears in the display. button :. Press the The current setting is displayed. "TIME" stands for the playing time and "CD NO" for the CD number display. 35 CD CHANGER MODE Selected the required setting using the button :. In the case of other changers, all the tracks on one CD are played randomly before the next CD in the changer is played. Stopping MIX Press the MENU button <. Repeating individual tracks or whole CDs (REPEAT) If you wish to repeat the current track, briefly press button 3 (RPT) =. "RPT TRCK" appears briefly and RPT lights up in the display. To stop the tracks being played randomly, press button 4 (MIX) = until "MIX OFF" appears in the display and MIX disappears. If you wish to repeat the current CD, press button 3 (RPT) = again. "RPT DISC" appears briefly and RPT lights up in the display. Stopping REPEAT Scanning all tracks on all CDs (SCAN) To briefly play all the tracks on all inserted CDs in ascending order, press button 5 (SCAN) =. "SCAN" appears in the display. Stopping SCAN If you want to stop the repeat function for the current track or CD, press button 3 (RPT) = until "RPT OFF" appears in the display and RPT disappears. To stop scanning, briefly press button 5 (SCAN) = again. The current track will then continue to be played. Note: You can set the scanning time. For further details, please read the section entitled "Setting scantime" in the "CD mode" chapter. Random play (MIX) To play all the tracks on the current CD in random order, press button 4 (MIX) =. "MIX CD" appears briefly and MIX lights up in the display. Pausing playback (PAUSE) Press button 2 =. "PAUSE" appears in the display. Cancelling pause To play the tracks on all the inserted CDs in random order, press button 4 (MIX) = again. "MIX ALL" appears briefly and MIX lights up in the display. Note: In the case of the CDC A 08, all the CDs in the changer are selected randomly. 36 Press button 2 = while in pause mode. Playback is continued. CLOCK Displaying the time To briefly display the time, press the MENU button < until the time appears in the display. DEUTSCH Time (CLOCK) Selecting 12/24-hour clock mode Press the MENU button <. "MENU" appears in the display. Setting the time manually The time is set automatically using the RDS signal. However, if you cannot receive any RDS stations or the RDS stations that you listen to do not support this feature, you can also set the time manually. Press the When you have finished making your changes, press the MENU button <. Press the button :. Set the minutes using the buttons :. and Press the Once you have set the minutes, press the button :. The hours now flash on and off. or button : to switch between the settings. your changes, press the MENU button <. Set the hours using the buttons :. and your changes, press the MENU button <. 37 PORTUGUÊS When you have finished making ESPAÑOL When you have finished making SVENSKA The time appears in the display. The minutes flash on and off and can be adjusted. Keep pressing the button : until "CLOCK OFF" or "CLOCK ON" appears in the display. NEDERLANDS until "CLOCKSET" appears in the display. Displaying the time when the unit is off To display the time when the unit is turned off, press the MENU button <. "MENU" appears in the display. ITALIANO Press the MENU button <. Keep pressing the button : FRANÇAIS or button : to switch between the modes. ENGLISH Keep pressing the button : until "24 H MODE" or "12 H MODE" appears in the display. AUDIO SETTINGS Audio settings Bass settings To set the bass, press the AUDIO button 9. "BASS" appears in the display. Press the or button : to adjust the bass. VOLUME DISTRIBUTION Volume distribution settings Balance settings To set the balance, press the GEO button ;. "BAL" appears in the display. Treble settings To set the treble, press the AUDIO button 9. "BASS" appears in the display. Press the or button : to adjust the balance (right/left). Fader settings To set the fader, press the GEO button ;. "BAL" appears in the display. Press the AUDIO button 9 again. "TREBLE" appears in the display. Press the or button : to adjust the treble. Press the GEO button ; again. "FADER" appears in the display. Switching loudness on/off If loudness is activated, the bass and treble levels are aurally compensated, i.e. they are increased at lower volume levels. Press the AUDIO button 9 for approximately 2 seconds. LD lights up in the display when loudness is switched on. Setting loudness intensity The loudness level can be set in steps ranging from 1 to 6. Press the MENU button <. Keep pressing the button : until "LOUDNESS" appears in the display. Press the or button : to set the level. Press the or button : to adjust the fader (front/back). Press the MENU button <. 38 EXTERNAL AUDIO SOURCES External audio sources In place of the CD changer, you can also attach other external audio sources that have a line output, for instance, portable CD players, MiniDisc players or MP3 players. If you want to connect an external audio source, you will need a Blaupunkt adapter cable to do so (Blaupunkt no.: 7 607 897 093). Furthermore, the AUX input must be activated in the menu. TECHNICAL DATA Amplifier Output power: 4 x 25 watts sine in accordance with DIN 45 324 at 14.4 V 4 x 40 watts max. power DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Technical data Tuner Frequency ranges: UKW (FM) : 87.5 ­ 108 MHz MW : 531 ­ 1602 kHz LW : 153 ­ 279 kHz Switching the AUX input on/off Press the MENU button <. "MENU" appears in the display. Keep pressing the button : until "AUX OFF" or "AUX ON" appears in the display. Press the or button : to switch AUX on/off. your changes, press the MENU button <. FM transmission range: 20 - 16 000 Hz When you have finished making CD Transmission range: 20 - 20 000 Hz Note: The AUX input can now be selected by pressing the CD·C button 8. Subject to changes! 39 Service-Nummern / Service numbers / Numéros du service aprèsvente / Numeri del servizio di assistenza / Servicenummers / Telefonnummer för service / Números de servicio / Número de serviço Tel.: Deutschland Belgique / België France Nederland Great Britain Danmark Sverige Norge Suomi Österreich 0 18 05 00 02 25 0 25 25 54 44 014 010 70 07 023 565 63 48 018 958 383 66 44 89 83 60 08 750 15 00 66 81 70 00 094 359 91 01-6 10 39-0 015 762 241 026 130 04 41 800-266 25 28 006 535 054 47 042 175 873 212 Fax: 0 51 21 49 40 02 0 25 25 54 48 014 010 73 20 023 565 63 31 018 958 383 94 44 89 86 44 08 750 18 10 66 81 71 57 094 359 92 36 01-6 10 39-391 015 769 473 026 130 05 14 708-681 71 88 006 535 053 12 042 175 873 229 EÏÏ¿~ âeská republika USA Singapore Slovensko Blaupunkt-Werke GmbH Bosch Gruppe 11/99 TRO K7/VKD 8 622 402 136