Radio / Cassette Milano RCR 45 Operating instructions 1 2 3 4 5 6 7 19 18 17 16 15 14 8 9 10 11 12 13 3 PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Contents Short instructions ........................ 19 Important notes ............................ 22 Precautions ........................................... 22 Traffic safety ......................................... 22 Installation/Connection .......................... 23 Radio operation with RDS ........... 25 AF - Alternative frequency .................... 25 REG - regional programme ................... 25 Selecting a waveband ........................... 26 Automatic tuning ................................ 26 Manual tuning .................................... 26 Scrolling through the broadcasting network (only FM) ................................. 26 Changing the memory bank (FM) ......... 26 Storing stations ..................................... 27 Automatically storing the strongest stations with Travelstore ....................... 27 Recalling stored stations ....................... 27 Scanning stored stations with Preset Scan ................................... 27 Scanning stations with Radio-Scan ...... 28 Selecting the seek tuning sensitivity ..... 28 Switching from stereo to mono (FM) ..... 28 Tape operation .............................. 30 Inserting a tape ..................................... 30 Removing a tape ................................... 30 Fast Forward/Rewind ............................ 30 PROG selector ...................................... 30 Anti-theft protection ..................... 23 Release panel ....................................... 23 Detaching the release panel .............. 23 Fitting the release panel .................... 23 Security code ........................................ 23 Entry of a wrong code number .............. 23 Switching on security coding ................. 24 Re-start following an interruption of the power supply ......................................... 24 Switching off security coding ................. 24 Optical indication for extra security ....... 24 DSC programming ........................ 31 Overview of the DSC factory settings ... 32 Appendix ....................................... 32 Care notes ............................................ 32 Release panel .................................... 32 Mechanism/cassette tapes ................ 32 Specifications ........................................ 32 Receiving traffic programme stations with RDS-EON ................ 29 Traffic announcement priority on/off ..... 29 Warning beep ........................................ 29 Switching the warning beep off .......... 29 Automatic seek tuning start ................... 29 Adjusting the volume for traffic announcements and the warning beep . 29 18 1 On Off Volume 19 PORTUGUÊS ESPAÑOL This unit can also be switched on and off with the Release Panel B. Also, when being connected correctly, you may turn the radio on and off via the ignition of your car. Use one of the following possibilities to continue operating the set when the ignition is switched off: a) Switch on/off with knob 1. b) Remove/re-install the release panel. c) Press AUD 3. When turning on the unit with the release panel or by pressing the AUD button, the system will start to play with the volume adjusted last. When operating the unit with the ignition being switched off, the system will automatically shut down after one hour in order to avoid that the battery goes flat. SVENSKA Treble + Treble ­ Bass ­ Bass + To alter a setting, · press AUD or GEO and then change the value with the rocker switch. The adjusted value is indicated in the display. The last setting will be stored automatically. To finish the setting: Press AUD or GEO. If the setting remains unchanged within 8 seconds, the display will switch back to the previous condition. NEDERLANDS ITALIANO 3 AUD/GEO AUD ­ To adjust the treble and bass frequencies with the rocker switch. Fader front Fader rear Balance left Balance right FRANÇAIS 2 LD Loudness - When listening at a low level, the Loudness function creates a more natural sound by boosting the low frequency range. To switch the Loudness on/off: Press LD. For more information, read chapter "DSC programming". GEO ­ To adjust the balance (left/right) and fader (front/rear) with the rocker switch. ENGLISH DEUTSCH Short instructions 4 DSC (Direct Software Control) Use the DSC function to customise certain programmable, basic settings to suit your personal needs and preferences. See chapter "DSC programming" for more information. 5 AF - Alternative frequency during RDS operation When "AF" lights up in the display, the radio will automatically search for a frequency offering better reception of the same RDS programme. To switch AF on/off: Press AF briefly. 6 REG REG ON / REG OFF With REG ON the system will only switch to a better alternative frequency if the latter belongs to a linked station offering the same regional programme (see "REG - regional programme). To switch REG on or off: Press REG until "REG ON" or "REG OFF" appears in the display (BEEP tone). 7 lo/dx To alter the automatic seek tuning sensitivity. If "lo" is displayed, the radio will only pick up strong, local stations (low sensitivity). If "lo" does not light up, the radio will also pick up weaker, distant stations (high sensitivity). To switch over: Press lo or dx briefly. For more information, see chapter "DSC programming". 8 Cassette removal Press . 9 Cassette loading slot Insert tape (side A or 1 up; the open side facing to the right). : Display Radio operation: NDR1 NDS - Station abbreviation or frequency FM - Waveband T - Memory bank (I, II, T) 5 - Preset button (1 - 6) - Stereo lo - Seek tuning sensitivity AF - Alternative RDS frequency TP - Traffic programme identifier TA - Priority for traffic programme stations LD - Loudness Tape operation: TR1--PLAY - Side 1 (or 2) 20 ; PROG button/Fast winding To switch to the other side of the cassette tape: Press both buttons simultaneously. The display shows TR1-PLAY or TR2-PLAY. > 1, 2, 3, 4, 5, 6 - preset buttons You can store six stations on each FM memory bank (I, II, T). To store a station: Press button during radio operation and hold down until the radio resumes play. To recall a station: Select the waveband and on FM also the desired memory bank (press FMT button as many times as required). Then press the corresponding preset button briefly. Extra function: Coding: Read chapter "Anti-theft protection" first. Buttons 1, 2, 3, 4 - To enter the fourdigit code. Press each of the buttons as many times as required until the code number given in the car radio passport stands in the display. ? TA (priority for traffic announcements) If "TA" is displayed, the system will play traffic stations only. TA on/off: Press button. Fast winding FR : Fast rewind; stop by pressing FF. FF : Fast forward; stop by pressing FR. < SC Radio operation Scan (sampling all stations to be received): Press SC briefly. = PS Preset Scan (sampling all stations stored on the preset buttons): Press PS briefly. 21 PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS A FMT - FM, Travelstore To switch between the FM memory banks I, II and "T" (Travelstore). To switch over: Press FMT as many times until the desired bank is indicated in the display. To store the six most powerful stations automatically with Travelstore: Store: Press FMT; seek tuning starts. Recall: Press FMT as many times until the display shows "T". Then briefly press one of the preset buttons 1, 2, 3, 4, 5, or 6. ITALIANO FRANÇAIS ENGLISH @ M·L To select the MW or LW waveband. Press button as many times until the desired band is adjusted. DEUTSCH Important notes B RELEASE / CODE-LED Release panel - detachable face. For extra anti-theft protection, you should take the detachable face with you when leaving your car. To remove it: Press RELEASE. To re-install the panel: Insert on the left side first with the cassette slot facing up and then press on the right until the panel locks in. Code LED May flash for additional theft protection when the car radio is switched off, provided this feature has been adjusted correspondingly via DSC (see DSC CODE-LED). C Rocker switch Seek tuning Precautions Before starting to use your new car radio, please read the information on "Traffic safety" and "Anti-theft protection" carefully. Traffic safety Up Down Up/down in short intervals ("AF" must be switched off) To scroll through the broadcasting network when "AF" is activated (e.g. NDR1 ... NDR4). / / Extra functions: In the DSC mode: Select and programme DSC functions. Coding: Enter code and confirm with . As the driver of a motor vehicle, it is your responsibility to pay attention to the traffic situation at all times. Never use your car radio in a way that could distract you. Please keep in mind that you travel a distance of 14 m per second at a speed of only 50 km/h. Should the traffic situation become particularly demanding, we advise you not to use the radio. Always make sure that you are still able to hear any warning signals coming from outside of the vehicle, such as police or fire engine sirens, so that you can react accordingly. Therefore, you should always select a moderate volume for playing your car radio while you are driving. 22 Installation/Connection If you would like to install this equipment yourself or add any new components, please read the enclosed installation and connection instructions carefully. Do not connect the loudspeaker outputs to ground! Use only the accessory and replacement parts approved by Blaupunkt. Release panel This unit is equipped with a release panel (detachable face). You can remove the control face at the push of a button. For extra anti-theft protection, we recommend you to take the detachable face with you when leaving your car. Re-inserting the release panel is child's play. The set will be ready for use immediately; you will find all the previous settings re-adjusted. Detaching the release panel · Press RELEASE. The unit will be switched off automatically. The control panel will be released in order for you to detach it. Store it in a safe place, excluding possible damages. Fitting the release panel · Insert the panel on the left side first with the cassette slot facing up and then · press on the right until it locks in. The unit is now ready for use with the settings adjusted before removing the panel. Security code This car radio is supplied with inactive code protection. In order to switch the security coding system on, proceed as described in the following. If the coding system is active while the power supply to the system is interrupted (e.g. theft, disconnection of the car battery), the set will be electronically blocked. In such a case it can only be made operable again by entering the correct code number given in the car radio passport. Entry of a wrong code number It should not be possible for a thief to find out the correct code number by trial and error. This is why the set will be blocked for a certain period of time after a wrong code number has been entered. The display will then show "CODE ERR". After the first three unsuccessful attempts, the system will lock for 8 seconds; after 23 PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH Anti-theft protection further attempts, the waiting time extends to one hour. After 20 unsuccessful attempts, the display will show "SERVICE". In this case you can no longer re-start the unit. Notice: Keep your car radio passport with the code number in a safe place in order to avoid "unauthorised access" to your car radio. When the security code system is activated, the unique code must be entered each time the power to the unit was interrupted. The radio will function again as soon as you have entered the correct code. If you have lost your radio passport and forgotten the code number, your radio can only be made operable again by one of our authorised service workshops (subject to payment). Now the security coding system is active. The display will briefly show "CODE" each time the set is turned on. Re-start following an interruption of the power supply (coding system is activated) · · · Turn on the radio. The display shows "CODE". Briefly press preset button 1; the display shows "0000". Enter the code number given in the Blaupunkt car radio passport: Example: The code number is 2521. - Press preset button 1 twice; the display shows "2000". - Press preset button 2 five times; the display shows "2500". - Press preset button 3 twice; the display shows "2520". - Press preset button 4 once; the display shows "2521". To confirm the code number: Press the upper part of the rocker switch . If the display shows "CODE ERR", you have entered a wrong code. Re-enter the correct code after the waiting time ("CODE" will appear in the display). ...