User manual BLITZ BZ7HR

TFT-LCD MONITOR 7 TFT-LCD C OLOR M ONITOR BZ7HR 7 TFT LCD COLOR MONITOR POWER MD SYS AV + SEL PHONE YOU'RE NOW READY FOR MORE FUN ON THE ROAD THAN EVER BEFORE 1) SUMMARIZE Respectful users: We appreciate that you choose to use our product TFT-LCD Monitors. Compared with the traditional CRT monitor, this model is light and thin, low radiation, without flashing, without distortion, high efficiency, with the new life concept of environmental, low power consumption, and green healthy. This LCD monitor employ DSP chip, MCU I2Ccontrolling technique and 7 TFT-LCD monitor, clear picture and true colour. Please read this operating instruction before using our product, so that you can use it in best way. 2) Features: Infrared remote control function OSD Screen Display Setting mode with automating store function NTSC/PAL auto-recognize function 3) Technical Performance: Screen Size: 7.0 (Diagonal) Display Format : 1140 (H) 234(V) Effective Display Dimension :154.1 85.5mm Pix Set: Vertical Stripe System: NTSC/PAL (Auto - Recognize) Video Input: 1.0 Vp -p (75 ) Audio Input :-10dB(10k ) Power Supply: DC 11V-14V Rated current : 800mA Rated Power Consumption : 10W Operating Temperature: 5 -40 Storage temperature: -10 -80 1 6 4) LCD MONITOR OPERATING INSTRUCTION Power Switch: push this switch to open the monitor, the indicate light turns on, the monitor begin to work, push again to turn off the monitor. Simulating measure increase: increase the picture brightness, color saturation, contrast, hue and volume total five contents, you can adjust the content associate with the key 3. Simulating Switch: according to personal favor you can adjust each simulating measure, press this button, to choose the simulating measure, press this button, it will display the content as the order: Brightness -color-saturation -Contrast-hue-volume. Decide which content that need to adjust. Press key or again to adjust this content. (It will be effective only for the hue adjustment in NTSC system) Simulating measure decrease: reduce the picture brightness, color saturation, contrast, hue and volume total five contents, you can adjust the content associate with the key 3. Video Input Option: used to choose the video signal sources. Usually, connect the video signal of VCD, DVD to Video, photographic head or other signal to video 2, use this switch to choose them. SYS: picture up /down/left/right MODE: Press mode button to select 16:9 / 4:3 display Power Indicate Light Infrared receiving window: receive remote control instructions. TFT-LCD Connector: the power supply of the monitor and the input jack of video signal 7 TFT LCD COLOR MONITOR POWER MD SYS AV + SEL PHONE 5 2 5) Remote Control Operating Instruction: 1.mute 2.Sleep 3.Contrast control + 4.Brightness control5.Contrast control 6.Brightness control + 7.Volume control + 8.Hue control + 9.Volume control 10.Hue control 11.Video 1/Video 2 12.Stander-by 13.Colour Saturation Increase 14.Colour Saturation Decrease 15.Mode:16:9/4:3 16.Prference 17.System 9) CONNECTOR 1 2 3 4 5 6 14 13 SLEEP 12 7 TFT LCD COLOR MONITOR BMW-7HEAD 7 8 9 10 11 MODE 15 PP 16 AV SYS 17 POWER MD TIME AV + SEL PHONE 6) OPERATING METHOD 7) PRECAUTIONS This monitor adopt the DC power supply, so please distinguish the positive polarity and negative polarity of the power and use it within the regulated power supply (11V-14V), to avoid the damage of the monitor parts. TFT-LCD monitor is high exactitude parts, so please avoid the collide, shake violently and squeeze, do not use it below the temperature of 10 or above the temperature of 40 . Avoid the dampness, liquid, metal body etc. enter into the monitors. Avoid to cause the leaking of electricity and short circuit to damage to the LCD monitors. Do not operate the monitor when temperature below 15 Since there is high-frequency power in the monitor please send it to professional or appointed maintenance service centre in case of malfunction It may cause danger of shock. CAR AUDIO(DVD OR VCD) Video1 input Audio1 input Please acquaint the function of each key on the monitors and remote controller before using (Refer to the operating instruction of the remote controller and monitor operating instruction) When you adjust the brightness, colour saturation, contrast, hue and volume of the picture to the best mode, if you want to keep this mode when you open the machine each time, if the brightness you used now is different with last time, you can repeat operating way as above. (adjust again as the way in operating instruction.) Because the monitors has built in video system auto-recognize circuit, the monitor can display the clear picture whether you input the NTSC video signal or PAL video signal. Video2 input CAR BACK VIEW BATTERY 8) ACCESSORIES 1. Remote Controller 1 pcs 2. Power and video input connecting wire 1 pcs 3. User s manual 1 copy 3 4