User manual BMW SERIE 3 - NAVIGATION MANUAL

Owner's Manual for Onboard Computer Contents A-Z Online Edition for Part No. 01 41 0 157 006 - © 07/02 BMW AG The onboard computer offers you an array of functions designed to foster safety while simultaneously enhancing your driving pleasure. The GPS navigation system frees you from the burden of reading maps or looking for road signs. It will guide you to any destination recorded on your map CD/DVD. The radio, with its superb reception quality, joins the cassette and CD players in providing optimal sound to satisfy every taste while serving up entertainment to make every trip seem short. The computer calculates vital operating data ­ including average fuel consumption, cruising range on the remaining fuel and the estimated time of arrival. It provides additional safety before driving ­ for example, with entry of a code number for the engine immobilizer ­ and during driving ­ for example, with an acoustic warning tone so that you do not drive faster than you intend to. We wish you an enjoyable driving experience. BMW AG Vorwort Online Edition for Part No. 01 41 0 157 006 - © 07/02 BMW AG Contents The onboard computer at a glance 8 The radio controls at a glance 10 Functions at a glance 12 Screen displays at a glance 14 Control concept 16 Explanation of function selection 18 Safety notice 19 Settings 19 Navigation To activate the system Safety 22 GPS 22 Map CD/DVD 22 Starting GPS navigation 23 Selecting a destination Selection options 23 Destination entry 23 Manual destination entry 24 Map-supported destination selection 27 Selecting destination in information 29 Recent destinations 30 Returning to the starting point 31 Selecting route 32 Destination guidance system Starting the destination guidance system 33 Displaying route 34 Changing route 36 Voice messages 37 Continuing guidance 38 Terminating/interrupting active guidance 38 Overview Address book Creating address book 39 Selecting an address 40 Deleting an address 40 Additional functions Current position 41 Wordmatch principle 42 Troubleshooting What to do if ... 43 © 2002 Bayerische Motoren Werke Aktiengesellschaft Munich, Germany Reprinting, including excerpts, only with the written consent of BMW AG, Munich. Order no. 01 41 0 157 006 US English VIII/02 Printed in Germany Printed on environmentally friendly paper ­ bleached without chlorine, suitable for recycling. Online Edition for Part No. 01 41 0 157 006 - © 07/02 BMW AG 3n Entertainment Computer DSP sound system Switching on and off 61 Selecting sound pattern 61 Individual tone control memory 62 Calling up tone control memory 62 Online Edition for Part No. 01 41 0 157 006 - © 07/02 BMW AG Index Computer Playing recorded media Starting and stopping the cassette 54 Mode displays 54 Noise suppression 55 Music track search 55 CD changer 56 Starting and stopping the CD 57 Mode displays 58 Using the buttons to search for music tracks 58 Menu-guided track search 59 Auxiliary ventilation Setting timer 71 Switching direct mode on/off 72 Entertainment Code Choosing and activating code 69 Deactivating code 70 Navigation Radio reception Selecting the frequency band 48 Selecting radio stations 48 Program type (PTY) 51 Storing radio stations 52 Calling up a station 53 Overview Radio controls Switching radio on and off 46 Varying volume 46 Tone control 47 Computer Starting computer 64 Range 64 Outside temperature 64 Time of arrival 65 Fuel consumption 65 Average speed 65 Speed limit 66 Distance 67 Stopwatch 68 Remote control 68 Index Everything from A to Z 76 4n Notes on the Owner's Manual > information on how you can use the computer to calculate various data To start using your onboard computer related to vehicle operation in the right away, consult the overview of con"Computer" chapter. trols and displays and the concise This chapter also contains informaoperating instructions in the first tion on the engine immobilizer code chapter. and the settings for the auxiliary heatIn addition, you will find ing*/-ventilation. > all the essentials you will need to The fastest way to find information on adjust the screen and care for your any specific topic is by turning to the computer in the "Overview" chapter index. > all information on using the GPS navigation system in the "Navigation" Because the control options for chapter the mobile phone also include > all the essentials on radio use and provisions for using it without the broadcast reception, combined with onboard computer, the operating instructions on how to use the casinstructions have been compiled in a sette and compact disc* (CD) players separate manual.< in the "Entertainment" chapter. This chapter also contains information on the "Digital Sound Processing* (DSP)" sound system A separate manual has also been provided for the "Emergency" functions.< A list explaining all of the abbreviations that appear on the computer screen can be found in the glossary at the end of the manual. Should the day arrive when you wish to sell your BMW, please remember to hand this Owner's Manual to the next owner ­ it is an important part of the vehicle. Information on care For complete information on the care of cassettes, CDs, DVDs and the device, please refer to the caring for your vehicle brochure. Hinweise Symbole Ihr individuelles Fahrzeug Online Edition for Part No. 01 41 0 157 006 - © 07/02 BMW AG 5n Symbols used Indicates precautions that must be followed precisely in order to avoid the possibility of personal injury and serious damage to the vehicle or the onboard computer.< Editorial notice Software release version Overview Index Aktualität bei Drucklegung Zu Ihrer eigenen Sicherheit Online Edition for Part No. 01 41 0 157 006 - © 07/02 BMW AG Computer To ensure that our accessories and invehicle equipment continue to combine advanced technology with unexcelled levels of quality, we at BMW pursue a policy of continuous, ongoing development embracing every aspect of design. It is therefore possible that Contains information that will some of your own vehicle's equipment assist you in gaining the optimum and features may vary from those benefit from your onboard computer described in this manual. We are also and enable you to care more effectively unable to guarantee that all of the for your onboard computer.< descriptions and illustrations contained in the manual will be completely accu< Marks the end of a specific item of rate in all respects. We must therefore information. request your understanding for the fact that we are unable to recognize legal * Indicates special equipment, country- claims based on the data, descriptions specific equipment and optional extras. and illustrations in this manual and your own vehicle's equipment. If you have additional questions, please consult your BMW center for information and advice. When you select the "Set" menu the version number of your onboard computer appears at the upper right of the screen. "SW 4-1/XX" means: > 4: Generation 4 > 1: Top Navigation > XX: Current version. The information in this Owner's Manual is based on the following software version: 1.0. Please contact your BMW center if you have any questions regarding the software version.< Entertainment Navigation 6n Online Edition for Part No. 01 41 0 157 006 - © 07/02 BMW AG 7n Overview Overview Navigation Navigation Computer Computer Index Overview Online Edition for Part No. 01 41 0 157 006 - © 07/02 BMW AG Index Entertainment Entertainment 8nThe onboard computer at a glance Online Edition for Part No. 01 41 0 157 006 - © 07/02 BMW AG The onboard computer at a glance Displays and controls 1 Display screen > Function displays 2 Indicator lamps for phone* mode > Yellow: Call is being routed through alternate network > Green: Call is connected > Red: Phone not available > Flashes: Phone is not registered with a service provider Please consult the separate manual for instructions on operating the telephone.< 3 Receiver symbol > Dial telephone number > End call 4 Clock symbol > Display the time when the ignition is off (ignition key in position 0 or removed from the ignition lock) 5 MENU > Select top menu 16 6 Using onboard computer 16 > Turn: highlight function or adjust setting > Press: confirm selection or save setting 7 Indicator lamp for operation of the auxiliary heating*/ventilation > Red: Timer activated > Flashes: Direct operation activated 8 Switch display to > Radio functions > Onboard computer functions Radio display and control elements, refer to page 10.< You can retrofit your onboard monitor with an AUX socket for connecting a third unit, such as a CD or MP3 player. 9n Online Edition for Part No. 01 41 0 157 006 - © 07/02 BMW AG Index Computer Entertainment Navigation Overview 10nThe radio controls at a glance Online Edition for Part No. 01 41 0 157 006 - © 07/02 BMW AG The radio controls at a glance Displays and controls 1 INFO > Activating RDS functions 49 > Activating PTY functions 51 2 Waveband/Memory level > FM (FM1/FM2/FMA) 48, 52 > AM (AM/AMA) 48, 52 3 Buttons for > Station selection for radio 52 > CD selection for CD changer 58 4 Display screen > Function displays 5 Changing tape side 54 6 Lower cover, eject cassette 54 7 SELECT > Selecting station scan functions Manual station selection 49 Sample station 50 Scan sensitivity level 50 > Dolby control 55 > Menu-guided search for music tracks 59 8 Station/track search > Station scan 50 > Tape forward/Tape rewind 55 > Music search Cassette 55 CD changer* 58 9 TONE > Selecting sound settings 47 10 Indicator lamp for radio mode 11 Switch display to > Onboard computer functions > Radio functions 12 Operating the radio > Press: turn radio on/off > Turn: adjust volume for radio and information on navigation 13 MODE Switching sound source to > Radio > Cassette > CD changer* 14 Cassette slot If your vehicle is equipped with a multifunction steering wheel*, you can use its integrated controls to operate the functions of the radio, the CD changer* and the telephone*, refer to the vehicle Owner's Manual for additional information.< 11n Online Edition for Part No. 01 41 0 157 006 - © 07/02 BMW AG Index Computer Entertainment Navigation Overview 12nFunctions at a glance Online Edition for Part No. 01 41 0 157 006 - © 07/02 BMW AG Functions at a glance 1 Computer > Cruising range display 64 > Outside temperature display 64 > Time of arrival display 65 > Starting fuel consumption calculations 65 > Starting calculations of average speed 65 > Setting speed limit 66 > Setting/displaying distance 67 > Switching stopwatch on/off 68 2 GPS-Navigation > Changing the map CD/DVD 22 > Selecting the destination 23 > Route selection 32 > Guidance to destination 33 > Displaying route 34 > Address book entries and access 39 > Current location display 41 4 Auxiliary heating*/ventilation > Entering and storing starting times 71 > Switching heating or ventilation on/off 72 5 Screen deactivation 6 Current date 7 Selectable settings, e.g.: > "Memo" function activated via "Set" 19 8 Emergency Contacting emergency call centers Please consult the separate manual for instructions on operation and use.< 9 Mobile phone* Please consult the separate phone manual for information on operation and use.< 11 Settings > Screen display mode selection 19 > Date and time display mode selection 19 > Audio guidance volume adjustment 19 > Screen color pattern selection 19 > Language selection 19 > Unit selection 19 > Switching Memo on/off 19 12 Current time 13n Online Edition for Part No. 01 41 0 157 006 - © 07/02 BMW AG Index Computer 3 DSP* (Digital Sound Processing) 10 Code > Selecting sound pattern 61 > Choosing and activating code 69 > Changing tone control > Deactivating code 70 individually 62 > Calling up tone control memory 62 Entertainment Navigation Overview 14nScreen displays at a glance Online Edition for Part No. 01 41 0 157 006 - © 07/02 BMW AG Screen displays at a glance Split-screen display mode (Split) Left side of screen > Information on the audio source (such as radio stations) 52 > Information from computer (such as current average fuel consumption) 65 > Route information (such as map section for scale) 35 Right side of screen > Information on current location (longitude, latitude and altitude) or > Information on the destination guidance (such as turning direction) 33. When calculating the altitude, which only takes place during GPS reception, deviations from the actual altitude of the current location can result.< Full screen > Information on communications (such as SMS bulletins) > Changes to the code, to the settings, to the DSP* and to the auxiliary heating*/ventilation. 15n Full-screen display mode (Full) Overview Index Online Edition for Part No. 01 41 0 157 006 - © 07/02 BMW AG All available information and selection data are displayed across the entire screen, regardless of the currently selected function. If you prefer this display mode, please select the "Set" function in the menu (MENU) to change the default setting "Split"; refer to page 19. Computer Entertainment Navigation 16nControl concept MENU selection The onboard computer integrates an extensive range of functions. Select the top menu (MENU) for a list of the various functions, refer to page 12. Select "MENU" When you select a function from the MENU, a list of selection options or of submenus will appear in the display: > For information on selecting functions, refer to "Selecting function" > For information on how to request a display of additional functions, refer to the section on "Additional functions" > For information on settings for menu selection, refer to "Resetting history" on page 17 > To return to the higher menu level, refer to the "Selecting return symbol" section on page 17 > For a display of additional entries in lists, refer to "Scrolling forward and back" on page 17. To return to the main MENU from any other menu/any other function: Press the right-hand rotary button. On the following pages these two steps are summarized as: Select "Function". Online Edition for Part No. 01 41 0 157 006 - © 07/02 BMW AG Selecting functions To select a function, use the right-hand rotary button to complete the two following steps: 1. Mark the function Additional functions Additional functions can be displayed using the symbol. Turn the right-hand rotary button toward the corresponding symbol. Now you can proceed to mark and select one of the functions in the display, refer to "Selecting functions". Depending on the range of available functions, it may take a few seconds until all additional functions appear on the screen.< You can only select those menu entries or functions that are displayed on the screen in white letters.< Turn the right-hand rotary button until the desired function is highlighted 2. Confirm your selection Control concept 17n Resetting history This function makes it easier for you to access previously viewed information or an edited function after switching off the onboard computer or changing the menu. Selecting return symbol To return to a previous menu or function, proceed as follows: Select . Scrolling forward and back When one of the above symbols appears on the screen, this indicates that further entries are available for viewing in the current list. As described in the "Selecting functions" section, you can also highlight this symbol with the right-hand rotary button before proceeding to confirm your entry by presssing the button. To interrupt this function to return to the initial menu level: Briefly press twice in a row. Index Online Edition for Part No. 01 41 0 157 006 - © 07/02 BMW AG Computer As described in the section on "Selecting functions", it is also possible If you switch on the onboard computer to use the right-hand rotary button to again or select the corresponding func- highlight the "Return" symbol and then tion again under "MENU", you will auto- select it by pressing. matically enter the menu level previously used. Entertainment Navigation Overview 18nExplanation of function selection 7. Press the right-hand rotary button to save 8. Set and then save the month and day with the same procedure. The system adopts the selected settings for the date 9. Select . To help you get oriented as quickly as possible, the individual selection procedures are provided immediately below each menu option. Individual control and entry processes may include the following elements: > Buttons that you press > Functions that you select using the right-hand rotary button. "Selecting functions", refer to page 16 > The right-hand rotary button appears with arrows for control procedures in which it is pressed or turned only. Individual steps are separated by the symbol. You exit the date entry mode once you complete this final step. An example: setting the date Here setting the date serves as an example to illustrate the control concept: 1. Select "MENU" You can also select the order in which the elements of the date will be displayed: you can display the days (dd) first and then the months (mm) ­ or you can have them displayed in the opposite order. To exit a function or a selection mode accidentally selected, please reselect it again. Then you can select any desired function.< 2. Select "Set" 3. Select "Date" 4. Select "Set" 5. Select the year 6. Turn the right-hand rotary button to set the year Online Edition for Part No. 01 41 0 157 006 - © 07/02 BMW AG Safety notice Settings Selecting settings The onboard computer of your vehicle has a basic setting for all displays. You can change these to suit your personal preferences as desired. Before doing so, please take note of the safety information provided on this page. 1. Select "MENU" 19n "WARNING! Use this system only when traffic and environmental conditions permit. Pay attention to traffic laws and situations. Safe vehicle operation is the driver's responsibility. Always wear your safety belt." To accept these safety precautions after reading: Select "Accept". For additional settings, follow the symbol. Online Edition for Part No. 01 41 0 157 006 - © 07/02 BMW AG Index Computer Entertainment As soon as the device is put into operation, the onboard computer shows the following safety precautions: 2. Select "Set". The adjustment options appear on the display screen. You can adjust: > "Screen" You can choose display mode (Split or Full), refer to page 15 > "Clock" > "Date" You can set the time and date, and also define the display mode > "Nav. volume" You can set the volume of the navigation system's voice messages relative to other sound sources (min to max) > "Color set" Use this function to select color settings for the display > "Language" This option allows you to select the language of the display texts. Navigation Overview