Owner's Manual Concept 7400 Kitchen Machines for model: MUM 7400 UC READ THIS MANUAL thoroughly for important safety and operating instructions before using this appliance. 1 IMPORTANT SAFEGUARDS WARNING: A risk of fire and electrical shock exists in all electrical appliances and may cause personal injury or death. When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions before using the kitchen machine. 2. To protect against risk of electric shock, do not put the drive unit in or under water or other liquid. 3. This appliance is not for use by children. 4. Close supervision is necessary when any appliance is used near children. 5. Do not leave appliances unattended during operation. 6. Unplug from outlet when not in use, before putting on or taking off parts and before cleaning. 7. To disconnect: switch appliance off then remove plug from power supply. 8. Avoid contacting moving parts. Keep hands, hair, clothing, as well as spatulas and other utensils away from whisks, beaters, blades, disc, dough hook and/or other moving parts during operation to reduce the risk of injury to persons and/or damage to the appliance or its attachments. 9. Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment. 10. The use of attachments not recommended or sold by the appliance manufacturer may cause fire, electric shock or injury and is therefore prohibited. 11. Do not use outdoors or when standing in a damp area. 12. Do not let cord hang over edge of table or counter, or touch hot surfaces. 13. Always operate appliance with covers in place. 14. Blades are sharp. Handle carefully due to risk of injury. 15. Remove beaters from mixing bowl before washing. NOTE: ALSO BE SURE TO READ THE WARNINGS AND CAUTIONS THAT ARE PROVIDED BEFORE EACH ATTACHMENT'S OPERATING INSTRUCTION. SAVE THESE INSTRUCTIONS 2 TABLE OF CONTENTS IMPORTANT SAFEGUARDS .................................................................. 2 Table of contents ..................................................................................... 3 ABOUT YOUR KITCHEN MACHINE ....................................................... 4 The Concept 7400 ................................................................................... 4 Unpacking ............................................................................................... 4 Electrical specifications ............................................................................ 4 Before using for the first time .................................................................. 5 Getting to know your Bosch Kitchen Machine ......................................... 5 Special accessories ..................................................................... 5 Power unit features .............................................................................. 5-7 Getting started ..................................................................................... 7-9 STANDARD ATTACHMENTS .................................................................. 9 Mixing bowl w/twin beating whisks and dough hook .......................... 9-10 How to use dough hook ......................................................... 10-11 Placing into operation with dough hook ....................................... 11 How to use twin beating whisks .................................................. 11 Operation with dough hook and whisk assembly .......................... 12 Use of mixing bowl with twin beating whisks ............................... 13 Placing into operation with twin beating whisks .......................... 14 Care and cleaning of bowl and its accessories ........................... 15 Stainless steel blender ............................................................................ 15 How to use blender ...................................................................... 15 Placing blender into operation ...................................................... 16 Example of use of blender ........................................................... 16 Care and cleaning of blender ........................................................ 17 SERVICE and REPAIR .......................................................................... 18 TROUBLESHOOTING ................................................................. 18 SAMPLE RECIPES .......................................................................... 19-20 SPECIAL ACCESSORIES ..................................................................... 21 Important Notes ..................................................................................... 22 BOSCH Small Appliance Warranty ......................................................... 23 HOUSEHOLD USE ONLY 3 ABOUT YOUR KITCHEN MACHINE Congratulations on having selected the Bosch Concept 7400 Kitchen Machine -- the finest interpretation of the Concept Series of kitchen machines that we and-- thankfully--cooking professionals the world over, feel are the best household-type kitchen machines available. As you read through these instructions, please pay particular attention to the IMPORTANT SAFEGUARDS. Specific safeguards for the attachments, as well as warnings and cautions, are provided in each section describing the operation of that particular attachment. The Concept 7400 The MUM 7400 UC stainless steel kitchen machine includes the following components, see figure 1: a. MUM 7400 UC stainless steel, electronic power unit b. Six-quart capacity stainless steel mixing bowl (MUZ 7 ER1) with cover with integral filling tube and filling funnel/ cap. c. Dough hook d. Twin beating whisks e. Six-cup capacity stainless steel blender (MUZ 7 MX3) f. Motor drive cover Unpacking Carefully remove the power unit from its packaging and place it on the counter so it is ready to use. As you remove the accessories from the carton, check them against figure 1 to assure that all the standard parts are present. Electrical Specifications Check to make sure that the voltage on which your Concept 7400 is to operate is the same as specified on the rating plate. Standard North American models have an 4 Figure 1. electrical power rating of 700-watt maximum power rating with the accessory attachment that draws the most power (some accessory attachments may draw less power). Before Using for the First Time Before using any of the attachments for the first time, it is recommended they be washed, rinsed well and dried. Of the attachments supplied, all parts, except the blender's blade/base assembly, are dishwasher safe: > The blender's blade/base assembly should be washed under running water and dried. Note: It is recommended that the blender's blade/base assembly never be left to stand in water or soap solution, to prevent the bearing lubricant from being washed out. Getting to Know Your Bosch Kitchen Machine The Bosch Concept 7400 Kitchen Machine comes with attachments shown in figure 1, however, in addition to the attachments that come with the MUM 7400 UC, Bosch offers many special accessories. Special Accessories To allow you to get the most service from your Bosch Concept 7400 Kitchen Machine, Bosch engineers have designed a line of special accessories to expand the usefulness of your machine. In addition to the attachments that come with the MUM 7400 UC, there are optional special accessories that can be ordered separately. These accessories include a food and meat grinder, grain mills, citrus juicer and ice cream maker, plus additional attachments that can be used with the meat grinder: fancy cookie attachment, fruit pulper, pasta5 making disks and grater attachment. See SPECIAL ACCESSORIES at the back of this booklet, page 21. Or, to view all currently available accessories, visit our Web site at www.boschsmallappliances.com Work on expanding the usefulness of the Bosch Kitchen Machine is a continuing process. If there is some type of accessory in which you are interested in, that is not included at the back of the book, please either write us at: · Bosch Small Appliances Customer Support BSH Home Appliances 5551 McFadden Avenue Huntington Beach, CA 92649 or call us at: · 1 (866) 44BOSCH [1 (866) 442-6724] Power Unit Features The MUM 7400 UC power unit has the following features, refer to figure 2: 700-watt motor The most powerful motor offered with any household kitchen machine. Electronic speed control Six-position rotary switch is located at front of power unit: 4 speeds plus a momentary pulse function and a stop position, "O/Off," see figure 2a. Timer Control The Bosch exclusive electronic timer is controlled by four buttons, see figure 2b. The timer can be set to operate the Concept 7400 for up to 30 minutes. Timing is displayed in the digital display. Electronic Safety Control Monitors the power unit to assure that it is functioning properly. Provides automatic shutdown in case of interruption of the power supply, stalled motor or motor overload. Digital LED Display Multifunction digital display, see figure 2c: 1. Speed Display The speed selected is displayed as bars across the top of the digital display: A single bar is illuminated for speed 1, two bars speed 2, etc. 2. Time Display Time selected when using the timer control is displayed and counts down when timer is in use. 3. Error Reporting Displays error message if there is a problem that has caused the electronic safety control to be activated. See TROUBLESHOOTING section for error codes. Motor drive cover Used to cover mono drive when not in use, see figure 2d. Mono drive Four electronically controlled shaft speeds are all available from a single location; each attachment automatically connects to the appropriate drive speed, figure 2e. Gentle start a special feature that brings the motor up to speed over a two-second period; limiting splashing. Convenient cord storage Convenient cord storage is located on the back of the power unit, see 2f. Integrated hand grips Side recesses provide for easy lifting and carrying of power unit when not in use, see 2g. Figure 2. 6 Four rubber feet Four rubber feet with formed suction cups provide the ultimate in stability, while also serving to isolate the power unit from the hard surface to minimize noise and vibration. Need clean smooth surface, see figure 2h. Getting Started The operation of your Bosch Concept Series Kitchen Machine is summarized below. Specific instructions for using each of the attachments, provided with Bosch Concept 7400 Kitchen Machine follow this summary. Please read the specific instructions thoroughly before using that attachment, paying particular attention to the IMPORTANT SAFEGUARDS and WARNINGS provided. 1. Place power unit on suitable work surface. Before using the machine with any of the attachments, the power unit should be placed on a suitable work surface. The surface should be sturdy, smooth and clean; make sure that there is no flour or oil on the surface. A clean smooth surface will provide the best footing for the suction cup feet on the power unit and will limit slipping and/or "walking." Plug power unit into power supply. Unwind the power unit's cord to appropriate length and plug it into a convenient nearby receptacle. Remove motor drive cover. Remove motor drive cover from monodrive. Select the attachment to be used. Select attachment you wish to use and place on power unit. See specific instructions for attachment selected. Specific instructions are located on pages listed below: 7 Attachment Pages Mixing bowl w/dough hook ....... 9­11 Mixing bowl w/twin whisks ....... 11­14 Blender ..................................... 15­17 Table 1. 5. Operate unit Once the attachment is in place, the power unit may be operated. The power may be manually turned on and off using the rotary switch or operating time may be controlled using the timer. Using the timer The operation of the power unit can be set to turn off automatically after a set time (maximum on time is 30 minutes). The length of time of operation may be selected with the appliance either already on and running, or with rotary switch in Off, "O/Off," position; power unit must, however, be plugged in. To use timer function: 1. Turn on the timer function by depressing the "time on" button, see figure 2b. The display will show minutes and seconds separated by a colon. The initial display will be "00:00" with the separating colon flashing. 2. Select the operating time desired by pressing the "+" button to increase the time in 10-second increments or the "-" button to decrease the time in 10-second increments. Holding either button down for more than 2 seconds will cause the time to increase or decrease rapidly. Also, if the running time desired is close to 30 minutes, the timer ...