User manual BOSTON ACOUSTICS G110 - PRODUCT BROCHURE

Value Driven Performance Key System Benefits · 1 3/4-inches of peak-to-peak excursion for deep, accurate, and powerful bass · 2-inch, 4-layer voice coil · Patented RadialVent® cooling, for increased power handling · SureSetTM impedance selection system and overdrive protection Key Installation Benefits · Optimized for small, sealed enclosures. Like the G5 and G2, only 1.0ft.3 is required for the 12-inch, and 0.5ft.3 for the 10-inch · Slim chassis design allows G1 to fit where others cannot such as truck boxes and slim enclosures · Integral sealing gaskets simplify both standard and inverted mounting · Multiple enclosure types and tuning options make it possible for G1 woofers to be tailored to any application Introducing the newest member of the Boston Acoustics subwoofer family--the G1. G1 woofers sport a 2-inch, 4-Layer voice coil, patented RadialVent® cooling, and unique SureSetTM impedance selection/overdrive protection; features that not only allow the woofer to handle more power but also add a level of reliability not available from competitors at any price point. Like all Boston subwoofers, G1 uses an extremely efficient design allowing for high output with small to moderate power amplifiers. Most importantly, with a depth of only 4 3/4-inches for the 10-inch and 5-inches for the 12-inch, its shallow design helps G1 fit where other woofers won't, such as truck boxes. Add in stunning design, high-end features like spring loaded terminals, and the flexibility to work with multiple enclosure types and you have a subwoofer that redefines entry level. Single or dual 4-ohm voice coil versions G1 subwoofers are available in both single 4-ohm or dual 4-ohm versions, allowing the user to optimize the impedance load to the amplifier, regardless of the number of subwoofers used in the system. 2-inch voice coil The G1 uses a 2-inch, four-layer voice coil for great power handling, uncommonly large for its price point. Patented RadialVent® cooling Integrated vents and the woofer's own pistonic action re-circulate fresh cooling air around the woofer voice coil. As a result, it can handle more power. SureSetTM Using mini ATC fuses, the SureSetTM system allows for simple impedance selection (dual 4-ohm only) as well as momentary overdrive protection. Rugged input terminals Spring loaded input terminals accept bare 8-gauge wire or pin connectors. G1 Subwoofer Specifications Model G112-44 G112-4 G110-44 G110-4 Size 12" 12" 10" 10" Impedance 2 /8 4 2/8 4 Mounting Depth 5" 5" 4 3/4" 4 3/4" RMS Power Handling 200 200 200 200 Watts Watts Watts Watts Frequency Response* 20Hz-350Hz 20Hz-350Hz 24Hz-350Hz 24Hz-350Hz Enclosure Size (Sealed) 1.0 1.0 0.5 0.5 Ft3 Ft3 Ft3 Ft3 Enclosure Size (Ported) 2.0 2.0 1.3 1.3 Ft3 Ft3 Ft3 Ft3 (4" (4" (3" (3" x x x x 13" 13" 10" 10" Port) Port) Port) Port) *In-car response ©2006 Boston Acoustics, Inc. Covered by patents issued and pending. All Rights Reserved. SureSet is a trademark and Boston, Boston Acoustics, the Boston Acoustics logo, and RadialVent are registered trademarks of Boston Acoustics, Inc. All specifications are subject to change. Boston Acoustics, Inc. 300 Jubilee Drive, Peabody, MA 01960 Phone # 978-538-5000 Fax # 978-538-5100 Web : www.bostonacoustics.com