User manual BROTHER HL-2070N

Brother Laser Printer HL-2030 HL-2040 HL-2070N User's Guide For visually-impaired users You can read this User's Guide with Screen Reader `text-to-speech' software. You must set up the hardware and install the driver before you can use the printer. Please use the Quick Setup Guide to set up the printer. You can find a printed copy in the box. Please read this User's Guide thoroughly before you use the printer. Keep the CD-ROM in a convenient place so you can use it quickly if you need to. You can also read the User's Guide with HTML format by visiting our web site at http://solutions.brother.com or accessing it from the CD-ROM directly. Please visit our web site at http://solutions.brother.com where you can get answers to Frequently Asked Questions (FAQs), Product Support and Technical Questions, and the latest Driver Updates and Utilities. Version 1 Laser printer HL-2000 series User's Guide Safety precautions We use the following icons throughout this User's Guide: Warnings tell you what to do to prevent possible personal injury. Electrical Hazard icons alert you to a possible electrical shock. Hot Surface icons warn you not to touch machine parts that are hot. Cautions specify procedures you must follow or avoid to prevent possible damage to the printer or other objects. Improper Setup icons alert you to devices and operations that are not compatible with the printer. Notes tell you how you should respond to a situation that may arise or give tips about how the current operation works with other features. I To use the printer safely There are high voltage electrodes inside the printer. Before you clean the inside of the printer, make sure you have turned off the power switch and unplugged the printer from the AC power outlet. Do not handle the plug with wet hands. Doing this might cause an electrical shock. After you have just used the printer, some internal parts of the printer are extremely hot. When you open the front or back cover of the printer, never touch the shaded parts shown in the illustration. Inside the printer (Front View) Open the back cover (Back View) The fuser unit is marked a caution label. Please do not remove or damage the label. Do not use a vacuum cleaner to clean up scattered toner. Doing this might cause the toner dust to ignite inside the vacuum cleaner, potentially starting a fire. Please carefully clean the toner dust with a dry, lint-free cloth and dispose of it according to local regulations. CAUTION Cleaning the outside of the printer: Make sure you have turned off the power switch and unplugged the printer from the AC power outlet. Use neutral detergents. Cleaning with volatile liquids such as thinner or benzine will damage the outside surface of the printer. Do not use cleaning materials that contain ammonia. II Trademarks The Brother logo is a registered trademark of Brother Industries, Ltd. Apple, the Apple Logo, Macintosh and TrueType are registered trademarks of Apple Computer, Inc in the United States and other countries. Epson is a registered trademark and FX-80 and FX-850 are trademarks of Seiko Epson Corporation. Hewlett Packard is a registered trademark and HP LaserJet 6P, 6L, 5P, 5L, 4, 4L 4P, III, IIIP, II, and IIP are trademarks of Hewlett-Packard Company. IBM, IBM PC, and Proprinter are registered trademarks of International Business Machines Corporation. Microsoft, MS-DOS, Windows and Windows NT are registered trademarks of Microsoft Corporation in the U.S. and other countries. ENERGY STAR is a U.S. registered mark. Citrix and MetaFrame are registered trademarks of Citrix Systems, Inc. in the United State. All other terms and brand and product names mentioned in this User's Guide are registered trademarks of their respective companies. Compilation and Publication Notice Under the supervision of Brother Industries Ltd., this manual has been compiled and published, covering the latest product's descriptions and specifications. The contents of this manual and the specifications of this product are subject to change without notice. Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other errors relating to the publication. ©2004 Brother Industries Ltd. Shipment of the Printer If for any reason you must ship your Printer, carefully package the Printer to avoid any damage during transit. We recommend that you save and use the original packaging. The Printer should also be adequately insured with the carrier. III Table of Contents 1 About this printer ......................................................................................................1-1 What is in the box? ............................................................................................................................ 1-1 Interface cable ............................................................................................................................. 1-1 Front view .................................................................................................................................... 1-2 Back view .................................................................................................................................... 1-2 Positioning the printer ........................................................................................................................ 1-3 Power supply ............................................................................................................................... 1-3 Environment ................................................................................................................................ 1-3 What kind of paper can I use? ........................................................................................................... 1-4 Type and size of paper ................................................................................................................ 1-4 Recommended paper .................................................................................................................. 1-5 Printable area .............................................................................................................................. 1-6 Portrait ..................................................................................................................................... 1-6 Landscape ............................................................................................................................... 1-6 Printing methods................................................................................................................................ 1-7 Printing on plain paper, bond paper and transparencies............................................................. 1-7 Printing on plain paper, bond paper or transparencies from the paper tray ............................ 1-7 Printing on plain paper, bond paper or transparencies from the manual feed slot ................ 1-10 Printing on thick paper, labels and envelopes ........................................................................... 1-13 Printing on thick paper, labels and envelopes from the manual feed slot ............................. 1-13 Types of envelopes to avoid.................................................................................................. 1-16 Duplex Printing ................................................................................................................................ 1-17 Guidelines for printing on both sides of the paper ..................................................................... 1-17 Printing on both sides of the paper (manual duplex printing) .................................................... 1-17 Manual duplex printing from the paper tray ........................................................................... 1-17 Manual duplex printing from the manual feed slot................................................................. 1-18 Paper orientation for manual duplex printing......................................................................... 1-19 2 Driver and software ...................................................................................................2-1 Printer driver ...................................................................................................................................... 2-1 For Windows® .............................................................................................................................. 2-3 Features in the printer driver ................................................................................................... 2-3 For Macintosh® .......................................................................................................................... 2-12 Uninstalling the printer driver..................................................................................................... 2-14 Printer driver for Windows® ................................................................................................... 2-14 Brother Laser driver for Macintosh® ...................................................................................... 2-15 Software .......................................................................................................................................... 2-16 Software for Networks ............................................................................................................... 2-16 BRAdmin Professional........................................................................................................... 2-16 Driver Deployment Wizard..................................................................................................... 2-16 Network Print Software.......................................................................................................... 2-16 Web BRAdmin ....................................................................................................................... 2-16 Automatic Emulation Selection.................................................................................................. 2-17 Remote Printer Console ............................................................................................................ 2-17 How to use and install the Remote Printer Console software ............................................... 2-17 IV 3 Control panel .............................................................................................................3-1 Service call indications ...................................................................................................................... 3-5 Control panel button (Go button) ....................................................................................................... 3-7 Print a test page .......................................................................................................................... 3-8 Using control panel button....................................................................................................... 3-8 Using the printer driver ............................................................................................................ 3-8 Print a Printer Settings page........................................................................................................ 3-9 Using the control panel button................................................................................................. 3-9 Using the printer driver ............................................................................................................ 3-9 Print Fonts (For HL-2070N) ....................................................................................................... 3-10 Using the control panel button............................................................................................... 3-10 Using the printer driver .......................................................................................................... 3-10 Network factory default setting (For HL-2070N) ........................................................................ 3-11 Network factory default setting with APIPA protocol disabled (For HL-2070N)......................... 3-11 4 5 Options .......................................................................................................................4-1 Wireless print server (NC-2200w)...................................................................................................... 4-1 Print server (NC-2100p) (For HL-2040) ............................................................................................. 4-2 Routine maintenance ................................................................................................5-1 Replacing the consumable items....................................................................................................... 5-1 Toner cartridge ............................................................................................................................ 5-2 Toner Low message ................................................................................................................ 5-2 Toner Life End message ......................................................................................................... 5-3 Replacing the toner cartridge .................................................................................................. 5-3 Drum unit ..................................................................................................................................... 5-7 Change Drum message........................................................................................................... 5-7 Replacing the drum unit........................................................................................................... 5-8 Cleaning .......................................................................................................................................... 5-11 Cleaning the outside of the printer............................................................................................. 5-11 Cleaning the inside of the printer............................................................................................... 5-12 Cleaning the corona wire........................................................................................................... 5-14 6 Troubleshooting ........................................................................................................6-1 Identifying your problem .................................................................................................................... 6-1 Error messages in the Status Monitor ............................................................................................... 6-2 Error message printout ...................................................................................................................... 6-3 Paper handling .................................................................................................................................. 6-4 Paper jams and how to clear them .................................................................................................... 6-5 Other problems ................................................................................................................................ 6-10 For Macintosh® with USB .......................................................................................................... 6-10 Improving the print quality ......................................................................................................... 6-10 Solving print problems ..................................................................................................................... 6-15 V A Appendix ................................................................................................................... A-1 Printer specifications.......................................................................................................................... A-1 Symbol and character sets (For HL-2070N) ...................................................................................... A-9 How to use the Web browser ...................................................................................................... A-9 How to use the Remote Printer Console ..................................................................................... A-9 For Windows® .......................................................................................................................... A-9 For Macintosh® ........................................................................................................................ A-9 Symbol and character sets list..................................................................................................... A-9 OCR symbol sets..................................................................................................................... A-9 HP LaserJet mode................................................................................................................. A-10 IBM mode .............................................................................................................................. A-11 Epson mode .......................................................................................................................... A-11 B Appendix (For Europe and Other Countries) ......................................................... B-1 Brother Numbers ............................................................................................................................... B-1 Important information: Regulations.................................................................................................... B-2 Radio interference (220 to 240 volt model only).......................................................................... B-2 International ENERGY STAR® Compliance Statement............................................................... B-2 IEC 60825-1 specification (220 to 240 volt model only) .............................................................. B-3 IMPORTANT - For Your Safety ......................................................................................................... B-4 C Appendix (For USA and Canada) ............................................................................ C-1 Brother Numbers ...............................................................................................................................C-1 Register your product ..................................................................................................................C-1 Frequently asked questions (FAQs) ............................................................................................C-1 Customer Service ........................................................................................................................C-1 Service center locator (USA only) ...............................................................................................C-2 Service center locations (Canada only).......................................................................................C-2 Brother fax back system (USA only)............................................................................................C-2 Important information: Regulations....................................................................................................C-3 Federal Communications Commission (FCC) Declaration of Conformity (For USA) ..................C-3 Industry Canada Compliance Statement (For Canada) ..............................................................C-4 International ENERGY STAR® Compliance Statement...............................................................C-4 Laser Notices.....................................................................................................................................C-5 Laser Safety (100 to 120 volt model only) ...................................................................................C-5 FDA Regulations (100 to 120 volt model only) ............................................................................C-5 IMPORTANT - For Your Safety .........................................................................................................C-6 I Index ............................................................................................................................I-1 VI 1 About this printer What is in the box? When you unpack the printer, check that you have all of the following parts. 1 1 1 2 2 Printer Drum unit and toner cartridge assembly 3 Quick Setup Guide 4 CD-ROM 5 AC power cord Parts may vary from one country to another. 4 5 3 Note The AC power cord may be slightly different than the one in the illustration above, depending on which country you bought the printer in. Interface cable The interface cable is not a standard accessory. Please purchase the appropriate interface cable for the interface you intend to use (USB, Parallel or Network). USB cable Do not use a USB interface cable that is longer than 6 feet (2.0 meters). Do not connect the USB cable to a non-powered hub or a Mac® keyboard. When you use a USB cable, make sure you connect it to the USB connector of your PC. USB is not supported under Windows® 95 or Windows NT®4.0. Parallel interface (For HL-2040 and HL-2070N) Do not use a Parallel interface cable that is longer than 6 feet (2.0 meters). Use a shielded interface cable that is IEEE 1284-compliant. Network cable (For HL-2070N) Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet Network. 1-1 About this printer Front view 1 2 3 8 7 1 4 6 5 Face-down Output Tray Support Flap (Support Flap) 2 Control Panel 3 Manual Feed slot 4 Manual Feed Paper Guides 5 Paper Tray 6 Power Switch 7 Front Cover 8 Face-down Output Tray 1 Back view 7 1 2 3 1 2 3 4 6 5 4 Back Cover AC Power Connector 10/100BASE-TX Port (HL-2070N) Parallel Interface Connector (HL-2040 and HL-2070N) 5 Side Cover 6 LED (Light-emitting Diode) (HL-2070N) 7 USB Interface Connector The printer illustration is based on HL-2070N. 1-2 About this printer Positioning the printer Please read the following before you use the printer. Power supply Use the printer within the recommended power range. Power source: USA and Canada: Europe and Australia: AC 110 to 120 V, 50/60 Hz AC 220 to 240 V, 50/60 Hz 1 The power cord, including extensions, should not be longer than 5 meters (16.5 feet). Do not share the same power circuit with other high-power appliances, such as an air conditioner, copier, shredder and so on. If you cannot avoid using the printer with these appliances, we recommend that you use a voltage transformer or a high-frequency noise filter. Use a voltage regulator if the power source is not stable. Environment You should setup the printer near a power outlet that you can easily reach, so that it can be easily unplugged from the power outlet if there is an emergency. Only use the printer within the following ranges of temperature and humidity: Temperature: 10 °C to 32.5 °C (50 °F to 90.5 °F) Humidity: 20% to 80% (without condensation) You should use the printer in a well-ventilated room. Put the printer on a flat, horizontal surface. Keep the printer clean. Do not put the printer in a dusty place. Do not put the printer where the ventilation hole of the printer is blocked. Keep a gap of approximately 100 mm (4 in.) between the ventilation hole and the wall. Do not put the printer in direct sunlight. If you have to put it near a window, use a blind or a heavy curtain to protect the printer from direct sunlight. Do not put the printer near devices that contain magnets or generate magnetic fields. Do not subject the printer to strong physical shocks or vibrations. Do not expose the printer to open flames, salty or corrosive gasses. Do not put objects on top of the printer. Do not put the printer near an air conditioner. Keep the printer horizontal when you carry it. 1-3 About this printer What kind of paper can I use? Type and size of paper The printer loads paper from the installed paper tray, or the manual feed slot. The names for the paper trays in the printer driver and this guide are as follows: Paper tray Manual feed slot Tray 1 Manual 1 While looking at this page on the CD-ROM, you can jump to the page for each printing method by clicking in the table. Media type Plain paper 60 g/m2 to 105 g/m2 (16 to 28 lb) Tray 1 Manual Select the Media type from the printer driver Plain Paper Recycled Paper Bond Paper Thick Paper or Thicker Paper Transparencies Recycled paper Bond paper Thick paper 105 g/m2 to 161 g/m2 (28 to 43 lb) Transparency Up to 10 sheets A4 or Letter A4 or Letter Labels A4 or Letter Thicker Paper Envelopes Env. Thin Env. Thick Tray 1 Manual Width: 69.9 to 215.9 mm (2.75 to 8.5 in.) Length: 116 to 406.4 mm (4.57 to 16 in.) Single sheet Envelopes Paper size Number of sheets A4, Letter, Legal*, B5(JIS), B5(ISO), Executive, A5, A6, B6(ISO) 250 sheets (80 g/m2 or 21 lb) * Legal paper is not available in some regions. 1-4 About this printer Recommended paper Europe Plain paper Xerox Premier 80 g/m2 Xerox Business 80 g/m2 Modo DATACOPY 80 g/m2 IGEPA X-Press 80 g/m2 Xerox Recycled Supreme 80 g/m2 3M CG3300 Avery laser label L7163 USA Xerox 4200DP 20 lb Hammermill Laser Paper 24 lb 1 Recycled paper Transparency Labels N/A 3M CG3300 Avery laser label #5160 Before you buy a lot of paper, please test a small quantity to make sure that the paper is suitable. Use paper that is made for plain-paper copying. Use paper that is 75 to 90 g/m2 (20 to 24 lb). Use neutral paper. Do not use acidic or alkaline paper. Use long-grain paper. Use paper with a moisture content of approximately 5%. This printer can use recycled paper that meets DIN 19309 specification. CAUTION Do not use ink jet paper, because it might cause a paper jam or damage your printer. Note If you use paper other than the ones recommended, a paper jam or misfeeding may occur in the printer. To help you choose which paper to use with this printer, see Important information for choosing your paper on page A-6. 1-5 About this printer Printable area The edges of the paper that cannot be printed on are shown below. Portrait 1 1 2 3 A4 Letter 4.23 mm (0.16 in.) 6.35 mm (0.25 in.) 4.23 mm (0.16 in.) 6.35 mm (0.25 in.) Legal 4.23 mm (0.16 in.) 6.35 mm (0.25 in.) 4.23 mm (0.16 in.) 6.35 mm (0.25 in.) B5 (ISO) 4.23 mm (0.16 in.) 6.01 mm (0.24 in.) 4.23 mm (0.16 in.) 6.01 mm (0.24 in.) 4 Executive 4.23 mm (0.16 in.) 6.35 mm (0.25 in.) 4.23 mm (0.16 in.) 6.35 mm (0.25 in.) A5 4.23 mm (0.16 in.) 6.01 mm (0.24 in.) 4.23 mm (0.16 in.) 6.01 mm (0.24 in.) A6 4.23 mm (0.16 in.) 6.01 mm (0.24 in.) 4.23 mm (0.16 in.) 6.01 mm (0.24 in.) B6 4.23 mm (0.16 in.) 6.01 mm (0.24 in.) 4.23 mm (0.16 in.) 6.01 mm (0.24 in.) 1 2 3 4 4.23 mm (0.16 in.) 6.01 mm (0.24 in.) 4.23 mm (0.16 in.) 6.01 mm (0.24 in.) Landscape 1 2 3 A4 Letter 4.23 mm (0.16 in.) 5.08 mm (0.2 in.) 4.23 mm (0.16 in.) 5.08 mm (0.2 in.) Legal 4.23 mm (0.16 in.) 5.08 mm (0.2 in.) 4.23 mm (0.16 in.) 5.08 mm (0.2 in.) B5 (ISO) 4.23 mm (0.16 in.) 5.0 mm (0.19 in.) 4.23 mm (0.16 in.) 5.0 mm (0.19 in.) 4 Executive 4.23 mm (0.16 in.) 5.08 mm (0.2 in.) 4.23 mm (0.16 in.) 5.08 mm (0.2 in.) A5 4.23 mm (0.16 in.) 5.0 mm (0.19 in.) 4.23 mm (0.16 in.) 5.0 mm (0.19 in.) A6 4.23 mm (0.16 in.) 5.0 mm (0.19 in.) 4.23 mm (0.16 in.) 5.0 mm (0.19 in.) B6 4.23 mm (0.16 in.) 5.0 mm (0.19 in.) 4.23 mm (0.16 in.) 5.0 mm (0.19 in.) 1 2 3 4 4.23 mm (0.16 in.) 5.0 mm (0.19 in.) 4.23 mm (0.16 in.) 5.0 mm (0.19 in.) 1-6 About this printer Printing methods Printing on plain paper, bond paper and transparencies You can print on plain paper, bond paper or transparencies from the paper tray or manual feed slot. For the paper you want to use, see What kind of paper can I use? on page 1-4. 1 Printing on plain paper, bond paper or transparencies from the paper tray Note Do not put more than 10 transparencies in the paper tray, if you print on transparencies. 1 Select the Paper Size, Media Type, Paper Source and other settings in the printer driver. Select Plain Paper, Bond Paper or Transparencies. Select Tray1. 2 Pull the paper tray completely out of the printer. 1-7 About this printer 3 While pressing the blue paper-guide release lever, slide the paper guides to fit the paper size. Check that the guides are firmly in the slots. 1 4 Put paper in the tray. 5 Check that the paper is below the maximum paper mark (). Note · Paper jams may occur if you put more than 250 sheets (80 g/m2 or 21 lb) of plain or bond paper in the paper tray at any one time. · Paper jams may occur if you put more than 10 transparencies in the paper tray at any one time. · When you use pre-printed paper, put the side that is going to be printed on (blank side) face down, with the top of the paper at the front of the tray. 6 Put the paper tray firmly back in the printer. Check that it is completely in the printer. 1-8 About this printer 7 Lift up the support flap to prevent paper from sliding off the face-down output tray. Note If you choose not to lift up the output tray support flap, we recommend that you remove printed pages immediately after they come out of the printer. 1 8 Send the print data to the printer. Note If you print on transparencies, remove each transparency immediately. Stacking the printed transparencies may cause a paper jam or the transparency to curl. 1-9 About this printer Printing on plain paper, bond paper or transparencies from the manual feed slot Note The printer automatically turns on the Manual Feed mode when you put paper in the manual feed slot. 1 1 Select the Paper Size, Media Type, Paper Source and other settings in the printer driver. Select Plain Paper, Bond Paper or Transparencies. Select Manual. 2 Send the print data to the printer. Note A No paper fed manual feed slot status is shown by the control panel LEDs until you put a sheet of paper or a transparency in the manual feed slot. 1 - 10 About this printer 3 Lift up the support flap to prevent paper from sliding off the face-down output tray. Note If you choose not to lift up the output tray support flap, we recommend that you remove printed pages as soon as they come out of the printer. 1 4 Using both hands, slide the manual feed slot paper guides to the width of the paper that you are going to use. 5 Using both hands, put one piece of paper or one envelope in the manual feed slot until the front edge of the paper or envelope touches the paper feed roller. When you feel the machine pull in the paper, let go. Note · Put the paper into the manual feed slot with the side to be printed face up. · Make sure that the paper or transparency is straight and in the proper position on the manual feed slot. If it is not, the paper or the transparency may not be fed properly, resulting in a skewed printout or a paper jam. · Do not put more than one piece of paper in the manual feed slot at any one time, as it may cause a jam. · If you put any Media (paper, transparency and so on) in the manual feed slot before the printer is in the Ready state, the media may be ejected without being printed on. 1 - 11 About this printer 6 After the printed page comes out of the printer, put in the next sheet of paper or the transparency as in Step 5 above. Repeat for each page that you want to print. Note If you print on transparencies, remove each transparency immediately after printing. Stacking the printed transparencies may cause a paper jam or the transparency to curl. 1 1 - 12 About this printer Printing on thick paper, labels and envelopes Note The printer automatically turns on the Manual Feed mode when you put paper in the manual feed slot. When you select the paper you want to use, see What kind of paper can I use? on page 1-4. If you print on envelopes, see Types of envelopes to avoid on page 1-16. 1 Printing on thick paper, labels and envelopes from the manual feed slot 1 Select the Paper Size, Media Type, Paper Source and other settings in the printer driver. Select Thick paper, Thicker paper, or Envelopes. Select Manual. Note For envelope users · · When you use Envelope #10, select Com-10 from Paper Size in the printer driver. For other envelopes which are not in the selection of the printer driver, such as Envelope #9 or Envelope C6, use User Defined... Size. For more information on the envelope size, see Paper size on page A-8. 1 - 13 About this printer 2 Send the print data to the printer. Note A No paper fed manual feed slot status is shown by the control panel LEDs until you put a sheet of paper or an envelope in the manual feed slot. 1 3 Lift up the support flap to prevent paper from sliding off the face-down output tray. Note If you choose not to lift up the output tray support flap, we recommend that you remove printed pages as soon as they come out of the printer. 4 Using both hands, slide the manual feed slot paper guides to the width of the paper that you are going to use. 1 - 14 About this printer 5 Using both hands, put one piece of paper or one envelope in the manual feed slot until the front edge of the paper or envelope touches the paper feed roller. When you feel the machine pull in the paper, let go. 1 Note · Put the paper into the manual feed slot with the side to be printed face up. · Make sure that the paper or the envelope is straight and in the proper position in the manual feed slot. If it is not, the paper or envelope may not be fed properly, resulting in a skewed printout or a paper jam. · Do not put more than one piece of paper or one envelope in the manual feed slot at any one time, as it may cause a jam. · If you put any Media (paper, envelope and so on) in the manual feed slot before the printer is in the Ready state, the media may be ejected without being printed on. 6 After the printed page comes out of the printer, put in the next sheet of paper or the envelope as in Step 5 above. Repeat for each page that you want to print. Note · Envelope joints that are sealed by the manufacturer should be secure. · All sides of the envelope should be properly folded without wrinkles or creases. · Remove each sheet or envelope immediately after printing. Stacking the sheets or envelopes may cause the paper to jam or curl. 1 - 15 About this printer Types of envelopes to avoid Do not use envelopes: that are damaged, curled, wrinkled, or unusual shape that are extremely shiny or textured with clasps, snaps or tie strings with self-adhesive closures that are of a baggy construction that are not sharply creased that are embossed (have raised writing on them) that were previously printed by a laser printer that are pre-printed on the inside that cannot be arranged when put in a pile that are made of paper that weighs more than the paper weight specifications for the printer that have been badly made, with edges that are not straight or consistently square with windows, holes, cutouts or perforations 1 IF YOU USE ANY OF THE TYPES OF ENVELOPES LISTED ABOVE, THEY MAY DAMAGE YOUR PRINTER. THIS DAMAGE IS NOT COVERED UNDER ANY BROTHER WARRANTY OR SERVICE AGREEMENT. Note · Do not put different types of paper in the paper tray at the same time because it may cause paper jams or misfeeds. · Do not print envelopes using duplex printing. · For proper printing, you must choose the same paper size from your software application as the paper in the tray. · See What kind of paper can I use? on page 1-4. Most envelopes will be suitable for your printer. However, some envelopes will have feed and print-quality problems because of the way they have been made. A suitable envelope should have edges with straight, well-creased folds and the leading edge should not be thicker than two pieces of paper. The envelope should lie flat and not be of baggy or flimsy construction. You should buy quality envelopes from a supplier who understands that you will be using the envelopes in a laser printer. Before you print a lot of envelopes, test one to make sure that the print results are what you want. Note Brother will not recommend a particular envelope because envelope manufacturers may change the envelope specifications. You are responsible for the quality and performance of the envelopes you use. 1 - 16 About this printer Duplex Printing The supplied printer drivers for Windows® 95/98/Me, Windows NT® 4.0 and Windows® 2000/XP all allow manual duplex printing. For more information about how to choose the settings, see the Help text in the printer driver. 1 Guidelines for printing on both sides of the paper If the paper is thin, it may wrinkle. If paper is curled, straighten it and then put it back in the paper tray or the manual feed slot. If the paper is not feeding properly, it may be curled. Remove the paper and straighten it. When you use the manual duplex function, it is possible that there may be paper jams or poor print quality. If there is a paper jam, see Paper jams and how to clear them on page 6-5. Printing on both sides of the paper (manual duplex printing) Note You should use plain paper and recycled paper. Do not use bond paper. Manual duplex printing from the paper tray 1 2 3 From the Advanced tab choose the Manual Duplex printing mode, and from the Basic tab choose the Paper Source to be Auto Select or Tray1. The printer will automatically print all the even-numbered pages on one side of the paper first. Remove the printed even-numbered pages from the output tray and put them back in the paper tray, placing the paper with the side that is going to be printed on (blank side) face down. Follow the instructions on the computer screen. 1 - 17 About this printer 4 The printer will now automatically print all the odd-numbered pages on the other side of the paper. Note When you put paper in the paper tray, first empty the tray then put the printed pages in the tray, with the printed side face up. (Do not add the printed pages to the top of a stack of unprinted paper.) 1 Manual duplex printing from the manual feed slot Note You should not use very thin or very thick paper. 1 2 From the Advanced tab choose the Manual Duplex printing mode, and from the Basic tab choose the Paper Source to be Manual feed. Using both hands put the paper in the manual feed slot with the side that is going to be printed on first facing up. Follow the instructions on the computer screen. Repeat this step until you have printed all the even-numbered pages. 3 Remove the printed even-numbered pages from the output tray and put them back into the manual feed slot in the same order one by one. Place the paper with the side that is going to be printed on (the blank side) face up. Follow the instructions on the computer screen. 4 Repeat Step 3 until you have printed all the odd-numbered pages on the other side of the paper. 1 - 18 About this printer Paper orientation for manual duplex printing The printer prints the second page first. If you print 10 pages on 5 sheets of paper, it will print page 2 then page 1 on the first sheet of paper. It will print page 4 then page 3 on the second sheet of paper. It will print page 6 then page 5 on the third sheet of paper, and so on. When doing manual duplex printing, the paper must be put in the paper tray in the following way: For the manual feed slot: Put the side to be printed on first, face-up, with the leading edge (top) of the paper in first. To print the second side, put the paper face down, with the leading edge (top) of the paper in first. If letterhead paper is used, this would be put in with the heading face down, and in first. To print the second side, put the heading face up and in first. For the paper tray: Put the side to be printed on first, face down, with the leading edge (top) of the paper at the front of the tray. To print the second side, put the paper face up, with the leading edge (top) of the paper at the front of the tray. If letterhead paper is used, this would be put in the paper tray with the heading face up, and at the front of the tray. To print the second page, put the heading face down and at the front of the tray. 1 1 - 19 2 Driver and software Printer driver A printer driver is software that translates data from the format used by a computer to the format that a particular printer needs. Typically, this format is a printer command language or page description language. The printer drivers for the following version of Windows® and Macintosh® are on the CD-ROM that we have supplied. You can also download the latest printer driver for all of the following operating systems from the Brother Solutions Center at http://solutions.brother.com The installation instructions for installing the printer driver for Windows® and Macintosh® are in the Quick Setup Guide. If you want to uninstall the printer driver, see Uninstalling the printer driver on page 2-14. 2 For Windows® 95/98/Me, Windows NT® 4.0 and Windows® 2000/XP · · · Windows printer driver (Hewlett-Packard LaserJet laser printer compatible driver) (For HL-2070N) Brother GDI printer driver for Windows® (For HL-2030 and HL-2040) Generic PCL Driver (For users of Citrix® MetaFrame®, Windows® Terminal Server environments and other Windows NT 4.0® and Windows ® 2000/XP network shared environments, we recommend the use of our Generic PCL Driver. This driver only supports basic printing functions.) (For HL-2070N: For Windows NT®4.0 and Windows® 2000/XP.) For Macintosh® · Brother Laser driver for Macintosh® For Linux · GDI printer driver Note For more infomation about Generic PCL Driver and Linux printer driver, please visit our web site at http://solutions.brother.com. Windows printer driver Windows® 95 Windows NT® 4.0 Windows 98/Me Windows® Windows® OS® ® 2000 XP ® (For HL-2070N) GDI driver Generic PCL Driver Brother Laser driver (For HL-2040) (For HL-2070N) (For HL-2030 and HL-2040) (For HL-2070N) Mac 9.1 to 9.2 Mac OS X 10.2.4 or greater Linux (Mandrake 9.1, Red Hat 9.0, SuSE Linux 8.2, Debian 3.0r1) 2-1 Driver and software You can change the following printer settings when you print from your computer. *1 *2 *3 Paper Size Multiple Page Orientation Copies Media Type Paper Source Resolution Toner Save Mode Manual Duplex printing*1 Watermark*1 Job Spooling*1 Quick Print Setup*1 Sleep Time*1 Status Monitor*1 Macro*1*3 Administrator*1*2 Insert Command/File*1*2*3 Page Protection*1 Print Date & Time*1 Density adjustment*1 True Type Mode*1*3 Error Message Printout*1 These settings are not available with Brother Laser driver for Macintosh®. These settings are not available with Windows NT ® 4.0 and Windows® 2000/XP. These settings are not available for HL-2030 and HL-2040. 2 2-2 Driver and software For Windows® Features in the printer driver You can download the latest printer driver or get other information by accessing the Brother Solutions Center at http://solutions.brother.com You can also change settings by clicking the illustration on the left side of the Basic tab in the Properties dialog box. For more information, please see the Help text in the printer driver. Note The screens in this section are from Windows® XP. The screens on your PC will vary depending on your Operating System. 2 Basic tab Note If you are using Windows® 2000 or XP, you can access the Basic tab by clicking Printing Preferences... in the General tab of the Printer Properties screen. If you are using Windows NT® 4.0, you can access the Basic tab by clicking Document Defaults... in the file menu of the Printers folder. Select the Paper Size, Multiple Page, Orientation and other settings. Select the Paper Source and other settings. 2-3 Driver and software Advanced tab Note If you are using Windows® 2000 or XP, you can access the Advanced tab by clicking Printing Preferences... in the General tab of the Printer Properties screen. If you are using Windows NT® 4.0, you can access the Advanced tab by clicking Document Defaults in the file menu of the Printers and Faxes folder. 2 1 2 3 4 5 Change the tab settings by clicking the following icons: 1 2 3 4 5 Print Quality Duplex Printing Watermark Page Setting Device Options Print Quality Select the resolution, toner save mode and print settings or gray printing setting. Resolution You can change the resolution as follows: · HQ 1200 · 600 dpi · 300 dpi 2-4 Driver and software Toner Save Mode You can save running costs by turning on the toner save mode, which reduces the print density. Print Setting You can manually change the Print setting. · Auto Selecting the Auto button will allow automatic printing with the most suitable print settings for your print job. · Manual You can change the settings manually by selecting the Manual button and clicking the Setting... button. For Windows® 95/98/Me users: brightness, contrast and other settings. For Windows NT® 4.0, Windows ® 2000/XP users: Printer Halftone, System Halftone, Improve gray printing. Duplex Printing · Manual Duplex If you select Manual Duplex, the dialog box for the manual duplex settings will appear. There are six types of manual duplex binding directions available for each orientation. Binding Offset If you check the Binding Offset option, you can also specify the offset for binding in inches or millimeters. 2 · Watermark You can put a watermarked logo or text into your documents. When you use a bitmap file as a watermark, you can change the size of the watermark and put it anywhere you like on the page. When you use text as a watermark, you can change the font, darkness and angle settings. Page Setting You can change the print image scaling and select Mirror / Reverse print options. 2-5 Driver and software Device Options 2 You can set the following Printer Function modes in this tab: (You can jump to the page for each Printer Function by clicking the function name in the list below.) · · · · · · · · · · · Job Spooling Quick Print Setup Sleep Time Status Monitor Macro (For HL-2070N) Administrator (For Windows® 95/98/Me users only) Insert Command/File (For HL-2070N: For Windows® 95/98/Me users only) Page Protection Print Date & Time Density adjustment Error Message Printout Note The Printer Function list may differ depending on the model. 2-6 Driver and software Job Spooling The printer saves data that you want to reprint. You can reprint a document without sending the data again from your PC. To reprint press and hold down the Go button for about 4 seconds until all the LEDs light up in order (Toner, Drum, Paper, Ready). 2 Note · Reprint function is not available for multiple copies. · If you want to prevent other people from printing your data using the Reprint function, clear the Use Reprint check box in the job spooling settings. Quick Print Setup You can turn the Quick Print Setup function ON or OFF. A small selection window appears on your computer. This will then let you make changes to the settings of the following functions: · · · · · Multiple Page Manual Duplex Printing Toner Save Mode Paper Source Media Type Sleep Time When the printer does not receive data for a certain period of time (timeout), it enters sleep mode. Sleep mode acts as though the printer was turned off. The default time-out is 5 minutes. When Intelligent Sleep Mode is selected, it is automatically adjusted to the most suitable time-out setting depending on how often you use your printer. While the printer is in sleep mode, all the LEDs are off, but the printer can still receive data from the computer. Receiving a print file or document automatically wakes up the printer to start printing. Pressing the Go button will also wake up the printer. Sleep mode can be turned off. To turn sleep mode off, go to the Advanced tab, select Device Options and then select Sleep Time. Double click the word Sleep Time in the Sleep Time screen, this will allow the Sleep Time Off function to appear, click Sleep Time Off to stop the printer from going into sleep mode. The Sleep Time Off function can be hidden by double clicking the word Sleep Time in the Sleep Time screen again. We recommend that you keep Sleep mode on for power saving. Status Monitor This reports the printer status (any errors that may happen with the printer) when printing. The default setting for the Status Monitor is off. If you would like to turn the status monitor on, go to the Advanced tab, select Device options and then select Status monitor. 2-7 Driver and software Macro (For HL-2070N) You can save a page of a document as a macro to the printer memory. Moreover, you can execute the saved macro - in other words, you can use the saved macro as an overlay on any document. This will save time and increase printing speed for often used information such as forms, company logos, letterhead formats or invoices. Administrator (For Windows® 95/98/Me users only) Administrators have the authority to limit the Number of copies, Scaling setting and Watermark setting functions. · · · · · Password Enter the password into this box. Set Password Click here to change the password. COPY LOCK Lock the copy pages selection to prevent multiple copy printing. WATERMARK LOCK Lock the current settings of the Watermark option to prevent changes being made. SCALING LOCK Lock the scaling setting as shown below. 1 in 1 100% 2 Insert Command/File (For HL-2070N: For Windows® 95/98/Me users only) This option allows data to be inserted into a print job. Using this function allows you to do the following. · · · Insert a print file or tiff format file into a print job. Insert a text string into a print job. Insert a macro, which is saved in printer memory, into a print job. Page Protection Page Protection refers to a setting that reserves additional memory for the creation of full page images. Selections are AUTO, OFF and Printer Default. The page protection feature allows the printer to create the full page image to be printed in memory before physically moving the paper through the printer. When the image is very complicated and the printer has to wait to process the image before printing, use this function. Print Date & Time Date: Specifies the format of the date. Time: Specifies the format of the time. 2-8 Driver and software Density adjustment Increase or decrease the print density. Error Message Printout You can choose whether the printer reports problem by printing error page or not. About the errors, see Error message printout on page 6-3. Selections are Printer Default (ON), ON and OFF. 2 2-9 Driver and software Tray Settings tab 2 Paper Source Setting This feature recognizes the paper size in each paper tray. 2 - 10 Driver and software Support tab Note If you are using Windows® 2000 or XP, you can access the Support tab by clicking Printing Preferences... in the General tab of the Printer Properties screen. If you are using Windows NT® 4.0, you can access the Support tab by clicking Document Defaults... in the file menu of the Printers folder. You can download the latest driver or get other product information by accessing the Brother Solutions Center at http://solutions.brother.com You can see the printer driver version. You can check the current driver settings. You can print the printer settings page and the internal fonts list. (The internal fonts list is available for HL-2070N only.) 2 2 - 11 Driver and software For Macintosh® This printer supports Mac OS® 9.1 to 9.2 and Mac OS® X 10.2.4 or greater. You can download the latest printer driver by accessing the Brother Solutions Center at http://solutions.brother.com Note The screens in this section are from Mac OS® X 10.3. The screens on your Macintosh® will vary depending on your Operating System. 2 Page setup You can set the Paper size, Orientation and Scale. Print Layout Set the Pages per Sheet, Layout direction and Border. Pages per sheet: Select how many pages will appear on each side of the paper. Layout direction: When you specify the Pages per sheet, you can also specify the direction of the layout. Border: If you want to add a border, use this function. 2 - 12 Driver and software Print settings Set the Resolution, Media Type, Toner Save and other settings. 2 You can change settings by selecting the setting in the Printer Settings list: Quality Media Type Toner Save Mode Quality You can change the resolution as follows: · · · 300 dpi 600 dpi HQ 1200 Media Type You can change the media type as follows: · · · · · · · · · · Plain Paper Recycled Paper Thick Paper Transparencies Thicker Paper Thin Paper Bond Paper Envelopes Env.Thin Env.Thick Toner Save Mode You can save running costs by turning on the Toner Save setting, which reduces the print density. 2 - 13 Driver and software Uninstalling the printer driver You can uninstall the printer driver that you installed with the following steps. Note · This instruction is not available if you installed the printer driver from Windows Add Printer function. · After uninstalling, we recommend that you restart your PC to remove files that were in use during uninstall. 2 Printer driver for Windows® For Windows® 95/98/Me, Windows NT® 4.0 and Windows® 2000 1 2 3 Click Start and select your appropriate printer from Programs. Select UnInstall. Follow the instructions on the screen. For Windows® XP 1 2 3 Click Start and select your appropriate printer from ALL Programs. Select UnInstall. Follow the instructions on the screen. 2 - 14 Driver and software Brother Laser driver for Macintosh® For Mac OS® 9.1 to 9.2 1 2 · · · Open the Extensions folder located in the System Folder on the Macintosh HD. Drag all these following files in the Extensions folder to the trash. BR_PrintMonitor(laser) Brother Laser Brother Laser(IP) 2 Note There may be several of the USB Print Driver(BRXXX)* and BR_PrintMonitor(BXX)* extensions with different endings. *The 'x' refers to the model of your machine. 3 4 Restart the Macintosh®. Once the computer has restarted you can then dump the trash. For Mac OS® X 10.2.4 or greater 1 2 3 4 5 6 7 Disconnect the USB cable between the Macintosh and your printer. Restart the Mac. Log on as an "Administrator". Run the Print Center (from the Go menu > Applications > Utilities > Print Center folder), then choose the printer you want to remove and remove it by clicking the Delete button. Click on the name of your printer in the printer list. From the Finder menu, delete the Printer. Drag the HL-MFLPro folder (from the Mac OS X 10.X > Library > Printers > Brother) into the Trash bin and then empty the trash bin. Restart the Macintosh®. 2 - 15 Driver and software Software Note This section is for Windows®. 2 Software for Networks Note This section is for HL-2070N. BRAdmin Professional The BRAdmin Professional software is a utility for managing your Brother network enabled printers that are running under Windows® 95/98/Me, Windows NT ® 4.0 and Windows® 2000/XP. It allows you to easily configure and check the status of your printer on the network. Driver Deployment Wizard This installer includes the Windows® printer driver and Brother network port driver (LPR and NetBIOS). If the administrator installs the printer driver and port driver using this software, the administrator can save the file to the file server or send the file by E-mail to users. Then, each user just clicks that file to have the printer driver, port driver, IP address, and so on, automatically copied to their PC. Network Print Software This installer includes the port monitors (Peer-to-Peer Printing software). They allow you to print through the Network (LAN) under Windows®. Web BRAdmin