SECURITY SYSTEM NOTES Installing/Service Company _________________________________ For Service Call __________________________________________ Central Station ___________________________________________ Duress Code ____________________ FUNCTION CODES Function Code Controls Function This system is is not partitioned. EMERGENCY ACTIVATION KEYS (check if enabled) Fire Auxiliary Emergency Police PROGRAMMED FUNCTIONS Cancel Alarm Change Partitions Chime Communicator Test Forced Arming (V) Group Bypass (V) Quick Arm (V) Re Exit Siren Test (V) These features should not be enabled on UL listed systems. ENTRY / EXIT DELAY TIMES Exit Delay Time __________ Secondary Exit Delay Time ________ Entry Delay Time _________ Secondary Entry Delay Time _______ ZONE DESCRIPTIONS Abort Delay (V) Auto Bypass (V) Auto Instant Battery Test 01 _______________ 02 _______________ 03 _______________ 04 _______________ 05 _______________ 06 _______________ 07 _______________ 08 _______________ 09 _______________ 10 _______________ 11 _______________ 12 _______________ 13 _______________ 14 _______________ 15 _______________ 16 _______________ 1 17 _______________ 18 _______________ 19 _______________ 20 _______________ 21 _______________ 22 _______________ 23 _______________ 24 _______________ THIS MANUAL IS FURNISHED TO HELP YOU UNDERSTAND YOUR SECURITY SYSTEM AND BECOME PROFICIENT IN ITS OPERATION. ALL USERS OF YOUR SECURITY SYSTEM SHOULD READ AND FOLLOW THE INSTRUCTIONS AND PRECAUTIONS IN THIS BOOKLET. FAILURE TO DO SO COULD RESULT IN THE SECURITY SYSTEM NOT WORKING PROPERLY. THIS BOOKLET SHOULD BE KEPT IN AN ACCESSIBLE LOCATION FOR THE LIFE OF THE SECURITY SYSTEM. IF YOU DO NOT UNDERSTAND ANY PART OF THIS MANUAL YOU SHOULD NOTIFY YOUR INSTALLING COMPANY. The SECURITY CONTROL can be turned on (ARMED) and off (DISARMED) by entering a 4 or 6 digit code into the Keypad Control, which is similar to a telephone keypad. If your Security Control has been so programmed, you may be able to turn on (ARM) your System by simply pressing the [STAY] or [EXIT] key. The system must always be disarmed using a 4 or 6 digit code. The LED keypad includes up to 35 lights and a built-in electronic sounder. These provide specific information relating to the status of the security system which is described in the booklet. Understanding what the lights and sounds mean will help you to easily operate your system. READ THE ENTIRE MANUAL AND, IF POSSIBLE, PRACTICE ON THE KEYPAD CONTROL WHILE YOUR PROFESSIONAL INSTALLER IS ON SITE. KEEP IN MIND, THE LEVEL OF SECURITY YOU WILL OBTAIN WITH THIS SYSTEM RELATES SPECIFICALLY WITH TWO MAJOR FACTORS: 1. 2. The quantity, quality, and placement of security devices attached to this system. The knowledge you have of the security system and how that knowledge is utilized in a weekly test of the complete system. YOU SHOULD BE AWARE OF THE FOLLOWING FACTS WHEN PREPARING A SAFETY/SECURITY PLAN FOR YOUR HOME/BUSINESS. Your security system is an electronic device and is subject to failure or malfunction. Do not rely on it as your single source of security. Your system should be tested weekly. Your system will not work without power. Warning devices will need to be loud enough, wired correctly, and properly placed to provide notification of an alarm event. Smoke and heat detectors may not detect heat and smoke in all situations. Use qualified security professionals to install and maintain your security system. It may be possible to arm the security system without the backup battery connected. Your periodic test should be done with A.C. Power removed to verify the battery is connected and adequately charged. Care should be taken to plug in and restrain the A.C. Transformer after testing. PLEASE READ THE FOLLOWING INFORMATION AND INSTRUCTIONS CAREFULLY BEFORE OPERATING YOUR SECURITY CONTROL SYSTEM. IF YOU DO NOT UNDERSTAND ANY PORTION OF THIS MANUAL, OR IF YOU HAVE ANY QUESTIONS ABOUT YOUR SYSTEM, CONTACT THE INSTALLING COMPANY LISTED ON PAGE 1 OF THIS BOOKLET. 2 TABLE OF CONTENTS GLOSSARY OF TERMS ......................................................................................4 UNDERSTANDING THE LIGHTS ........................................................................5 Armed Light....................................................................................................5 Bypass Light ..................................................................................................5 Cancel Light ...................................................................................................5 Chime Light....................................................................................................5 Exit Light ........................................................................................................5 Fire Light ........................................................................................................5 Instant Light ...................................................................................................5 Power Light ....................................................................................................5 Ready Light....................................................................................................6 Stay Light .......................................................................................................6 Zone Light ......................................................................................................6 EMERGENCY ACTIVATION KEYS .....................................................................6 KEYPAD FUNCTIONS .........................................................................................7 Arming Your System In The "Away" Mode.....................................................7 Arming System In "Stay" Mode ......................................................................7 Using The Quick Arm.....................................................................................8 Disarming The System...................................................................................8 Cancel / Abort Feature...................................................................................9 Bypassing Zones ...........................................................................................9 Group Bypass ................................................................................................9 Unbypassing ..................................................................................................9 Turning The Door Chime On And Off ............................................................9 CHANGING USER CODES................................................................................10 ASSIGNING USER CODE AUTHORITY LEVELS.............................................10 OTHER KEYPAD FUNCTIONS..........................................................................12 Setting The Keypad Tone ............................................................................12 Change Partition ..........................................................................................12 View Alarm Memory.....................................................................................12 Test Function ...............................................................................................12 Reset Function.............................................................................................13 Setting The System Clock............................................................................13 Set System Date ..........................................................................................14 KEYPAD CONTROL TONES (BEEPS)..............................................................14 SERVICE MENU.................................................................................................15 EMERGENCY EVACUATION PLANS ...............................................................16 3 GLOSSARY OF TERMS Abort Delay: An option that allows a delay in reporting to the central station. Authority Level: The level of access an individual has when using an alarm panel. Central Station: Location where alarm data is sent during an alarm report. Chime Feature: An option that allows the keypad to sound a ding-dong whenever an entry/exit door is opened. Codes: Can be either User Codes (relating to a person) or Function Codes (a toggle switch to turn specific functions on/off). NOTE: A system may have either 99 four (4) digit codes or 66 six (6) digit codes, but not a mixture of the two. Duress Code: An option that allows a special code to be sent to the central station that indicates the alarm system is being operated under duress. Forced Arming: An option that allows the system to be turned on (ARMED) with one or more zones open. A system that is ready to be "force armed" will flash the ready light. (Note: Those zones that are not ready will not create an alarm.) Function Code: A Function Code is either a four (4) or six (6) digit code that has been programmed by the installer to operate a device. Group Bypass: An option that allows the user to bypass multiple zones with a single operation. Instant/Delay: An option that allows an instant alarm condition for Entry/Exit doors, or grants a delay to allow someone to enter/exit the building without an alarm, or before entering a user code to disarm. Master Code: A master arm/disarm code that can program other user codes. Partitioned System: A system divided into multiple areas in which its own user or users control each area. Perimeter: The outer edge of the protected area. Quick Arm: An option that allows you to turn on (ARM) the security system by pressing either the [STAY] or [EXIT] key on the keypad control (for ARMING only) as programmed by the installing company. User Code: A four (4) or six (6) digit entry used to arm or disarm the system. 4 UNDERSTANDING THE LIGHTS Armed Light The armed light is "on" when the system is armed. The armed light is "off" when it is disarmed. The armed light will flash when there has been an alarm during the previous arm cycle. Bypass Light The bypass light is "on" when any zone in this keypad's partition is bypassed. The zone(s) that is bypassed will also be illuminated. If the bypass light is "off", no zones are bypassed. Cancel Light The cancel light will flash during an abort delay time. If a code is entered followed by the [CANCEL] key while this light is flashing, all abortable reports will stop the communication process. Note: The abort feature must be enabled. Entering a code followed by the [CANCEL] key during or after an alarm report to the central station will cause the cancel light to come on. It will stay on until the central station has received the cancel report. Note: The cancel feature must be enabled. Chime Light The chime light is "on" when the chime feature is "on"; "off" otherwise. Exit Light The exit light is "on" during the exit delay. Please note that the light will flash during the last 10 seconds of the exit delay as a warning that the time is running out. (The user may want to disarm the system if the exit light is flashing in order to prevent an alarm. The user may then re-arm the system and exit before the delay expires.) Fire Light A steady fire light means a fire zone has been faulted. A rapidly flashing fire light means that a fire zone is in a trouble condition. Instant Light The instant light is "on" when there is no delay on your entry/exit door(s). Any time the instant light is "on" and the exit delay has expired, the opening of an entry/exit door will produce an immediate alarm. The instant light can be toggled on or off by pressing the [Stay] key while the system is armed. When the instant light is "off", the entry/exit door(s) is delayed. Power Light The power light is on if the primary power is on. The power light will flash if the system has a low battery condition. 5 Ready Light The ready light is "on" when the system is ready to arm and "flashes" if ready to force arm. The ready light is off when the system is not ready to arm because of a zone(s) being faulted. Stay Light The stay light is "on" when the all interior (motion detector) zones are bypassed. Zone Light The zone lights are "off" when everything is normal. A zone light will be "on" if the zone has been bypassed. If a zone light is "flashing", that zone is in alarm or has been faulted. If a zone light is "flashing" rapidly, it means that the zone is in a trouble condition. Trouble conditions are: Tamper Hardware Low Battery Loss of Supervision (A combination of Alarm/Fault and Tamper/Trouble will produce a rapid "flashing" light for a short period of time, followed by a slow "flashing" light.) EMERGENCY ACTIVATION KEYS NOTES: You must hold these keys for 2 seconds to activate these functions. Your system may not be programmed for these activation keys (see page 1). You should press thes ...