FourPointSurroundTM FPS2000 Digital Multimedia Speaker System Installation and Operating Instructions © 2000 Cambridge SoundWorks, Inc. Safety & Regulatory Information The following sections contain notices for various countries: Notice for the USA FCC Part 15: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, this notice is not a guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try one or more of the following measures: Reorient or relocate the receiving antenna. Increase the distance between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician. CAUTION: To comply with the limits for the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be installed with computer equipment certified to comply with the Class B limits. All cables used to connect the computer and peripherals must be shielded and grounded. Operation with non- certified computers or nonshielded cables may result in interference to radio or television reception. Declaration of Conformity According to the FCC96 208 and ET95- 19 Manufacturer/ Importer's Name: Creative Labs Inc. Manufacturer/ Importer's Address: 1901 McCarthy Boulevard Milpitas, CA. 95035 United States Tel: (408) 428-6600 declares under its sole responsibility that the product Trade Name: Model Number: Creative Labs/ Cambridge SoundWorks CSW1500 Compliance This product conforms to the following Council Directive: Directive 89/ 336/ EEC, 92/ 31/ EEC (EMC), 73/23/EEC (LVD) Modifications Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the device. Modifications Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the device. Notice for Canada This apparatus complies with the Class B limits for radio interference as specified in the Canadian Department of Communications Radio Interference Regulations. Cet appareil est conforme aux normes de CLASSE "B" d'interference radio tel que spe'cifie' par le Ministère Canadien des Communications dans les règlements d'interfèrence radio. has been tested according to the FCC / CISPR22/85 requirement for Class B devices and found compliant with the following standards: EMI/ EMC: ANSI C63.4 1992, FCC Part 15 Subpart B This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesirable operation. Ce matériel est conforme à la section 15 des régles FCC. Son fonctionnement est soumis aux deux conditions suivantes: 1. Le matériel ne peut étre source d'interférences et 2. Doit accepter toutes les interférences reques, Y compris celles pouvant provoquer un fonctionnement indésirable. Compliance Manager Creative Labs, Inc. January 18, 1999 WARNING: To prevent fire or shock hazard, do not expose this appliance to rain or moisture. CAUTION: This symbol indicates that the marked item may be hot and should not be touched without taking care. · To minimize the risk of burns or other injuries to children, position the device such that hot surfaces are out of their reach. · To minimize the risk of fire, keep flammable materials like paper and cloth (for example, curtains) away from the hot surfaces. Important Notice The serial number for the FPS2000 Digital is located on the subwoofer. Please write this number down and keep it in a secure area. This is for your security. i IMPORTANT SAFETY INSTRUCTIONS READ INSTRUCTIONS - All safety and operating instructions should be read before the FPS2000 Digital amplified subwoofer/satellite system is operated. RETAIN INSTRUCTIONS - The safety and operating instructions should be retained for future reference. HEED WARNINGS - All warnings on the subwoofer and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS - All operating and use instructions should be followed. CLEANING - Unplug the Power Supply Adapter from the wall outlet or other power source before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. ATTACHMENTS - Do not use attachments not recommended by Cambridge SoundWorks as they may cause hazards. WATER AND MOISTURE - Do not use the subwoofer near water--for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. ACCESSORIES - Do not place the FPS2000 Digital system on an unstable cart, stand, tripod, bracket, or table. The subwoofer may fall, causing serious injury to a child or adult, and serious damage to the product. Any mounting of the satellites or subwoofer should follow the manufacturer's instructions, and should use a mounting accessory recommended by Cambridge SoundWorks. VENTILATION - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the subwoofer and to prevent it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. The openings should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or Cambridge SoundWorks' instructions have been adhered to. HEAT - The subwoofer should be situated away from heat sources such as radiators, heat registers, stoves, and other products (including amplifiers) that produce heat. POWER SOURCES - The subwoofer should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. POLARIZATION - The power supply may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. POWER-CORD PROTECTION - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the subwoofer. LIGHTNING - For added protection for the FPS2000 Digital system during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the subwoofer due to lightning and power-line surges. OVERLOADING - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. OBJECT AND LIQUID ENTRY - Never push objects of any kind into the subwoofer through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the speakers or the subwoofer. SERVICING - Do not attempt to service any part of the FPS2000 Digital yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. DAMAGE REQUIRING SERVICE - Unplug the power supply from the wall outlet or other power source and refer servicing to qualified service personnel under the following conditions: a) When the power supply adapter or plug is damaged. b) If liquid has been spilled, or objects have fallen into the subwoofer. c) If the subwoofer or power supply adapter has been exposed to rain or water. d) If the FPS2000 Digital does not operate normally by following the operating instructions; or exhibits a distinct change in performance. e) If the product has been dropped or damaged in any way. REPLACEMENT PARTS - When replacement parts are required, be sure the service technician has used replacement parts specified by Cambridge SoundWorks or have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards. SAFETY CHECK - Upon completion of any service or repairs to the FPS2000 Digital system, ask the service technician to perform safety checks to determine that the FPS2000 Digital system is in proper operating condition. WALL OR CEILING MOUNTING - The FPS2000 Digital satellites should be mounted to a wall or ceiling only as recommended by Cambridge SoundWorks. ii FourPointSurround FPS2000 Digital Multimedia Speaker System Contents Introduction ................................................................................................ 1 Inspecting For Damage ................................................................................ 2 Overview ..................................................................................................... 2 Installation Sequence .................................................................................. 2 Speaker Placement ...................................................................................... 3 Speaker Wiring Diagram ............................................................................. 4 Satellite Connections ................................................................................... 5 Attaching The Floor Stands ......................................................................... 6 Power Supply Adapter ................................................................................. 7 Audio Signal Connections ........................................................................... 7 Connection To Sound Blaster Live! Via DIGITAL DIN .................................. 8 Volume Control ............................................................................................ 8 Using The Volume Control ........................................................................... 9 Mounting The Volume Control .................................................................... 9 Adjusting Output Level ............................................................................. 10 Bass Level Control ..................................................................................... 10 Optimizing The Sound Of Your System ..................................................... 11 Mounting The Satellites ............................................................................ 11 Important .................................................................................................. 12 Specifications ............................................................................................ 12 Technical Support ..................................................................................... 12 1-Year Limited Warranty ........................................................................... 13 iii Introduction T hank you for purchasing FourPointSurround FPS2000 Digital by Cambridge SoundWorks. The FPS2000 Digital is the first multimedia speaker system to support DirectSound®3D and Environmental Audio in true multichannel, digitally transfered sound. It lets you experience the full potential of the multichannel sound encoded in today's latest computer software. We think you will find it adds an exciting new dimension to computer sound and gaming. Cambridge SoundWorks 1-877-YES-HIFI (1-877-937-4434), 8 AM to Midnight, Eastern time 1 PM to 4 AM Greenwich Mean Time Outside US: Tel: 617-332-5936 Fax: 617-527-3194 www.cambridgesoundworks.com or e-mail us at info@cambridgesoundworks.com 1 Inspecting For Damage Examine each speaker unit carefully for signs of shipping damage. If there is any damage, do not install the system. If there is any problem, or if anything is missing, call the store where the system was purchased or refer to the "Technical Support" section on pages 12-13. Save the carton and its inserts in case you need to transport your FPS2000 Digital system later. Overvie ...