User manual CANON BJC-85

IS-12 Color Image Scanner Cartridge Contents Introduction Using the Scanner Using the Scanner With Windows® Using the Scanner With Macintosh® Scanner Problems Contents 2 Introduction I Copyright This manual is copyrighted by Canon Computer Systems, Inc. (CCSI) with all rights reserved. Under the copyright laws, this manual may not be reproduced in any form, in whole or part, without the prior written consent of CCSI. © 2000 Canon Computer Systems, Inc. I Disclaimer Canon Computer Systems, Inc. has reviewed this manual thoroughly in order that it will be an easy to use guide to using your optional IS-12 Color Image Scanner Cartridge with the Canon BJC-85 Color Bubble Jet Printer. All statements, technical information, and recommendations in this manual and in any guides or related documents are believed reliable, but the accuracy and completeness thereof are not guaranteed or warranted, and they are not intended to be, nor should they be understood to be, representations or warranties concerning the products described. Your printer and the software media included with your printer have been sold to you subject to the limited warranties set forth in the warranty card and license agreement enclosed with the respective product. All software is licensed AS IS, as described in the license agreement enclosed with the software media. Further, CCSI reserves the right to make changes in the specifications of the products described in this manual at any time without notice and without obligation to notify any person of such changes. Contents 3 Introduction I Trademarks Canon, BJ, and Bubble Jet are trademarks of Canon Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries. Mac and the Mac logo are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. All other product and brand names are trademarks or service marks of their respective owners. ENERGY STAR® COMPLIANT As an ENERGY STAR® Partner, Canon U.S.A., Inc. has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Contents 4 Using the Scanner Scanner Driver Basics Unpacking the Scanner Cartridge Installing the IS Scan Software Installing the Scanner Cartridge Basic Scanning Procedure Using the White Calibration Sheet Scanning Area Guidelines Loading an Image Using the Scanner 5 Scanner Driver Basics Installing the optional IS-12 Color Image Scanner Cartridge in the printer makes it possible to scan and save images such as your favorite photographs and greeting cards. Photograph Greeting card Home page Wallpaper for your computer Using the Scanner 6 Scanner Driver Basics Windows To use the scanner cartridge, you must install the IS Scan software, which includes the IS Scan scanner driver and the IS Scan Plus utility program. These two programs provide many features that allow you to perform simple color adjustments to improve the quality of the original image or enhance the image for artistic effect. You can run the IS Scan driver from within a TWAIN-compliant graphics application program, or you can run the IS Scan Plus utility program directly as a stand-alone application program. The IS Scan Plus utility program allows you to scan, edit, enhance, and save the image data. Macintosh To use the scanner cartridge, you must install the IS Scan software. You can run the IS Scan driver from within a TWAIN-compliant graphics application, or you can run it directly as a stand-alone program. Note TWAIN is an industry interface standard that allows software applications to communicate with digital imaging devices such as scanners. Applications that support TWAIN provide a standardized method of acquiring images. Using the Scanner 7 Unpacking the Scanner Cartridge Make sure you have the following items. I IS-12 Color Image Scanner Cartridge Optical components Electrical contacts Caution The scanner cartridge is composed of precision components. To avoid poor scanning results, do not touch the optical components or electrical contacts. Using the Scanner 8 Unpacking the Scanner Cartridge I White Calibration Sheet You use this sheet to maintain the correct color balance of scanned images. The first time you install the scanner cartridge, you need to run the white level calibration. You will also run calibration when the white level calibration data needs to be updated. I Scanning Holder You can use this holder to hold a photo or other small image you wish to scan. The holder is two layers, one being a clear plastic cover to protect photographs. I Scanner Cartridge Container Use this plastic container to store the IS-12 Color Image Scanner Cartridge. Using the Scanner 9 Installing the IS Scan Software Make sure the BJC-85 printer driver is installed before you proceed with the following instructions. 1 2 3 Insert the printer driver CD-ROM into your CD-ROM drive. Click Start and then click Run. In the Run dialog box, type: d:\drivers\ISScan\disk1\setup.exe where d: is your CD-ROM drive. 4 Click OK and follow the instructions on the screens. Using the Scanner 10 Installing the Scanner Cartridge Optical components Electrical contacts Caution · The scanner cartridge is composed of precision components. To avoid poor scanning results, do not touch the optical components or electrical contacts. · To avoid damaging the scanning head of the scanner cartridge, do not attempt to store the scanner cartridge in an SB-10 Ink Cartridge Storage Box. There may be ink inside the container that could damage the scanning head of the scanner cartridge. Using the Scanner 11 Installing the Scanner Cartridge I Replacing a BJ Cartridge With the Scanner Cartridge 1 2 Make sure that the printer is plugged in and turned on. Open the cartridge cover and press the CARTRIDGE button; the cartridge holder moves to the center of the printer. Lift up on the green tab to remove the BJ cartridge from the cartridge holder. Take care that you do not raise any other tab nor remove an ink tank. Lift the green tab 3 Immediately store the BJ cartridge in an Ink Cartridge Storage Box. Close the container tightly to prevent the print head of the BJ cartridge from drying out. If the print head dries out, the BJ cartridge will become unusable. Using the Scanner 12 Installing the Scanner Cartridge 4 Remove the scanner cartridge from its protective case. With the label on the scanner cartridge up, set the scanner cartridge in the cartridge holder at a slight angle. Align the marks ( ) on the scanner cartridge with the marks on the holder. Align these marks Cartridge holder 5 Press down on the raised left side of the scanner cartridge until it locks in place. Press down here Using the Scanner 13 Installing the Scanner Cartridge 6 7 Close the cartridge cover. Press the CARTRIDGE button. The scanner cartridge moves to the home position. Removing the Scanner Cartridge Follow this procedure to remove the scanner cartridge and install the BJ cartridge when you are finished scanning. 1 Make sure that the printer is turned on and then press the CARTRIDGE button to move the cartridge holder to the center of the printer. POWER RESUME CARTRIDGE ERROR 2 Note Open the cartridge cover. To avoid damaging the printer, do not touch the orange film cable under the cartridge cover. Using the Scanner 14 Installing the Scanner Cartridge 3 Lift up the tab on the scanner cartridge to remove it from the cartridge holder. Lift up the tab 4 Place the scanner cartridge in its protective case. Caution Always remove the scanner cartridge from the printer and store it in its protective case when it is not being used. To avoid damaging the scanning lens on the scanner cartridge, do not attempt to store it in an Ink Cartridge Storage Box. Remove the BJ cartridge from its container and install it in the holder. Close the cartridge cover. Press the CARTRIDGE button. The cartridge holder returns to the home position. Using the Scanner 15 5 6 7 Basic Scanning Procedure After installing the IS Scan scanner driver, you can use the BJC-85 printer as a scanner. 1 2 Windows Remove the BJ cartridge installed in the cartridge holder and then install the IS-12 Color Image Scanner Cartridge. Start a graphics application program. For Windows Users · If you use a TWAIN-compliant graphics application program, launch the TWAINcompliant application program. IS Scan launches from within the application program. · If you use IS Scan Plus, select Programs from the Start menu first. Point to IS Scan Plus and then select IS Scan Plus. Macintosh For Macintosh Users · If you use a TWAIN-compliant graphics application program, launch the TWAINcompliant application program first. IS Scan launches from within the application program. · If you use IS Scan as a stand-alone application program, double-click IS Scan BJC-85 in the folder you specified during the installation procedure. Using the Scanner 16 Basic Scanning Procedure 3 4 The first time you use the scanner, you need to perform the White Level Calibration. Using the White Calibration Sheet Insert the image you wish to scan into the scanning holder, then load the scanning holder into the auto sheet feeder. Loading an Image 5 Scan the image. Windows Macintosh Scanning an Image Scanning an Image 6 7 Save the scanned image. Now you can install the BJ cartridge and print the scanned image. Using the Scanner 17 Using the White Calibration Sheet The white calibration sheet provided with the scanner cartridge is used for maintaining the correct color balance of scanned images. White level calibration is required when the scanner cartridge is used for the first time and when the white level calibration data needs to be updated. When white level calibration is needed, you will see this screen when you click the Prescan or Scan button. Windows Macintosh Using the Scanner 18 Using the White Calibration Sheet 1 Load the white calibration sheet with the cropped corner at upper left. Align the sheet with the right side of the sheet feeder. Adjust the paper guide to the left side of the sheet. 2 3 Follow any instructions on your screen. When the white calibration sheet is ejected from the paper output tray, White Level Calibration processing is complete. Using the Scanner 19 Using the White Calibration Sheet Note · Do not leave the white calibration sheet in locations that are exposed to direct sunlight or that are subject to high temperatures or humidity. · Do not bend or wrinkle the white calibration sheet. · When cleaning the white calibration sheet, use a soft cloth that is dipped in a weak, neutral detergent solution, and then wipe its wet surface off with a dry, soft cloth. · The white level calibration data is stored into memory and used for maintaining the correct color balance of scanned images. When a message appears and prompts you to load the white calibration sheet, click the OK button and perform white level calibration. You can also initiate White Level Calibration from the IS Scan driver. Windows Macintosh Other IS Scan Features Other IS Scan Functions Using the Scanner 20 Scanning Area Guidelines Paper size A6 105.0 × 148.0 mm A5 148.0 × 210.0 mm A4 210.0 × 297.0 mm B5 182.0 × 257.0 mm Letter 8.50 × 11.00 in Legal 8.50 × 14.00 in Scanning area 3.86 × 5.43 Inches 5.55 × 7.87 Inches 8.00 × 11.29 Inches 6.89 × 9.72 Inches 8.19 × 10.60 Inches 8.19 x 13.09 Inches · The scanning area varies according to conditions such as the scanning resolution and display resolution. · If you wish to scan images larger than the size of the scanning holder provided with the IS-12 Color Image Scanner Cartridge, the SH-101 A4/LTR scanning holder is available for purchase. Visit the Canon Web site to find out about accessories and supplies (www.ccsi.canon.com). · The maximum thickness of the image must be within 0.45 mm, including the scanning holder. The scanning holder is 0.2 mm thick so the image you wish to scan must be less than 0.25 mm thick. · To prevent possible damage to the printer or scanner cartridge, do not scan an image with paper clips or staples. Using the Scanner 21 Loading an Image 1 2 Slide the paper guide to the left edge of the auto sheet feeder. Place the image in the scanning holder. · To prevent paper jams, always insert the image you wish to scan into the scanning holder. · Do not leave the scanning holder in locations that are exposed to direct sunlight or that are subject to high temperatures or humidity. · When you load the scanning holder on the printer, be sure to set the paper thickness lever to the down (or envelope) position. Scanning with the lever set incorrectly will adversely affect the print quality. 3 Load the scanning holder in the auto sheet feeder of the printer. Using the Scanner 22 Loading an Image 4 Adjust the paper guide to the left edge of the scanning holder. Paper Guide Caution To prevent possible damage to the scanning holder, always insert the seamed side into the auto sheet feeder first. Using the Scanner 23 Using the Scanner With Windows Using IS Scan Changing the Scanning Mode Using the Customized Scanning Mode Saving the Settings Using the Saved Settings Other IS Scan Features Using IS Scan Plus Using Copy Using Capture Image Using Capture Photo Editing a Scanned Image Printing a Scanned Image Saving a Scanned Image Using the Scanner With Windows 24 Using IS Scan This section describes how to scan an image when you launch IS Scan from within a TWAIN-compatible application program. I Scanning an Image Note These basic procedures may vary according to the application program you are using. 1 2 Install the IS-12 Color Image Scanner Cartridge in the printer. Installing the Scanner Cartridge Make sure Canon IS Scan 2 is set as the Acquire Source and then select the command used for scanning (such as Acquire or TWAIN) from the menu of the application program. The main IS Scan dialog box displays: Using the Scanner With Windows 25 Using IS Scan 3 Specify the basic settings. · Click the down-arrow on the right of the Paper Size box and select the most appropriate paper size for the image you wish to scan. · Select the most appropriate scanning mode for the image you wish to scan in the Scanning Mode box. Changing the Scanning Mode 4 Note Load the image you wish to scan in the auto sheet feeder of the printer and click the Prescan button. It's a good idea to use prescanning to determine whether or not an image can be scanned properly or to test the effects of image adjustments. If the image is slanted or a portion of the image is cut off in the preview area, click the Clear button. Load the image correctly and click the Prescan button again. 5 To scan only a portion of the image, you can drag the mouse to specify the portion. The specified portion is called a Selection Box and only the area in the Selection Box will be scanned. To specify the Selection Box: · Point to a corner of the rectangular area of the image that you want to select. · Drag the mouse to the opposite corner of the rectangle. Using the Scanner With Windows 26 Using IS Scan · Release the mouse button. The Selection Box appears on the image. Note · To move the Selection Box, place the mouse pointer within the Selection Box and drag the mouse to the desired position. · To resize the Selection Box, point to a corner of the Selection Box and then drag the mouse. · You can confirm the dimensions of the Selection Box in the Image Size box. · The minimum size of the Selection Box is 1" × 1" (25.4 mm × 25.4 mm). Using the Scanner With Windows 27 Using IS Scan 6 7 Load the image you wish to scan in the auto sheet feeder again. Click the Scan button. Remember, if you specified a Selection Box in step 5, only that portion of the image is scanned. 8 After scanning is complete, click the Transfer button to transfer the image data to the TWAIN-compatible graphics application program. Adjust, edit, or enhance the image in the application program as needed. Using the Scanner With Windows 28 Using IS Scan Note · Some TWAIN-compliant graphics application programs do not display the main IS Scan dialog box but instead display a different screen characteristic of the application program. If you are using this type of application program, read the documentation of the application program carefully and perform prescanning or normal scanning. · After launching IS Scan from within a TWAIN-compatible application program, do not close the application program. If you do, the system may not be able to respond. · To quit IS Scan, select Exit Driver from the Settings menu. Using the Scanner With Windows 29 Changing the Scanning Mode You can select a scanning mode according to your scanning purpose. Optimum settings, such as image type and resolution, are pre-assigned based on the contents of a scanning job. When you wish to customize the settings for special scanning jobs, click the Custom button. I Selecting a Default Scanning Mode Select the most appropriate icon in the Scanning Mode box of the main IS Scan dialog box according to your scanning purpose. Edge Emphasis Character Emphasis Color Matching Off Off On Off Off Off Off Off On Scanning Mode Purpose Standard setting for scanning a color image Standard setting for scanning a monochrome image Suitable for scanning a photographic print such as a snapshot Image Type Resolution Color 180 dpi Grayscale 180 dpi Color 360 dpi Prescan Mode Grayscale Grayscale Grayscale Using the Scanner With Windows 30 Changing the Scanning Mode Scanning Mode Purpose Scans by converting a monochrome image into the data suitable for facsimile transmission Scans by converting a monochrome image into the data suitable for OCR input Suitable for scanning an image that consists mostly of text Used for customizing the settings for special scanning jobs Using the Customized Scanning Mode Image Type Resolution Monochrome 200 dpi Edge Emphasis Character Emphasis Color Matching Off On Off Off On Off On Off Off -- Prescan Mode Monochrome Monochrome 360 dpi Monochrome 180 dpi -- Monochrome Monochrome -- Note When you select FAX or OCR, the document is scanned and processed as a grayscale image and converted to monochrome binary image data. This process eliminates unnecessary image background and increases the quality of the scanned text and line art. When you select Text, the document is scanned and processed as a monochrome image. Using the Scanner With Windows 31 Using the Customized Scanning Mode When you select Custom in the Scanning Mode box of the main dialog box, the Custom dialog box opens and allows you to adjust the scanning settings for special scanning jobs. 1 Open the main IS Scan dialog box. 2 Click the Custom button in the Scanning Mode box. This displays the Custom dialog box: Using the Scanner With Windows 32 Using the Customized Scanning Mode 3 Specify these settings in the Custom dialog box: Standard Value You change the standard values for the default settings here. Image Type Select a type of image: Color (the default), Grayscale, or Monochrome. Resolution Determines the precision of the scanned image. The higher the resolution setting, the higher the precision and quality of the scanned image. (However, the higher the resolution setting, the larger the file size.) · The 90 dpi setting is sufficient for viewing images on a screen. · The 180 dpi setting is sufficient for printing images. Threshold Determines the intensity of halftones for monochrome images. Drag the slide bar to the left for a lighter image or drag it to the right for a darker image. The Threshold option is available only when the Image Type is set for Monochrome and Character Emphasis is off. Edge Emphasis Sharpens the edges of a soft image to create a clearer, more accented appearance in the entire image. This option is available only when the Image Type is set for Monochrome. Edge Emphasis is not used with prescanning. Using the Scanner With Windows 33 Using the Customized Scanning Mode Character Emphasis Determines whether or not Image Trust processing is used for scanning grayscale images. Image Trust processing sharpens the appearance of characters in monochrome documents. This is especially helpful if you intend to use the scanned original with an OCR software application. This option is available only when the Image Type is set for Monochrome. Color Matching In some cases, the colors displayed on your monitor may not match the colors you see in your printout. Color Matching attempts to match the colors of the scanned image with the selection in the Monitor Type box in order to attain a better match between the colors you see on the monitor and the colors you see in your printout. This option is available only when the Image Type is set for Color. Monitor Type Displays the name of the monitor profile currently in use. To select another monitor type setting, click the down-arrow and select a name from the dropdown list. This list includes the names of ICC profile formats, standard profiles for monitors, installed in the system. A monitor profile can be selected only when Color Matching is selected. Prescan Selects the type of image for prescanning. Select Monochrome, Grayscale (the default), or Color. Using the Scanner With Windows 34 Using the Customized Scanning Mode 4 5 Click the OK button to return to the main dialog box. Make sure that the image you wish to scan is inserted into the scanning holder properly and is loaded in the auto sheet feeder of the printer, then click the Scan or Prescan button. Using the Scanner With Windows 35 Saving the Settings You can save the settings in the main IS Scan dialog box to a file. The next time you scan, you only need to open the file in which the desired settings are stored and start scanning. I Saving the Settings to a File Save the Page Size, Scanning Mode, and Image Size settings in the main IS Scan dialog box as a file. 1 2 Specify the desired settings in the Paper Size, Scanning Mode, and Image Size boxes. Select Save Settings File from the Settings menu. 3 4 5 Select the folder in which the file is to be saved. Enter a File name. Click the Save button. Using the Scanner With Windows 36 Using the Saved Settings Open the file in which the desired settings were saved and use those settings for scanning. 1 2 Select Open Settings File from the Settings menu. Select the file you wish to use, then click the Open button. The file name is displayed in the Settings File box, and the settings change in the main IS Scan dialog box. · When you open the file while an image is displayed in the preview area, the prescanned or scanned image is discarded. Prescan or scan the image again. · Select Save Settings File from the Settings menu when you have changed the settings and you wish to overwrite the current file and save all the current settings to it. · Select Save Settings File As from the Settings menu when you have changed the settings and you wish to save all the current settings under a new file name. Note Using the Scanner With Windows 37 Other IS Scan Features I White Level Calibration Use this feature to maintain the correct color balance of scanned images. You need to perform White Level Calibration when you use the scanner cartridge for the first time and when the white level calibration data needs to be updated. 1 2 3 4 Select White Level from the Option menu of the main IS Scan dialog box. When a message appears, insert the white calibration sheet into the auto sheet feeder of the printer. Using the White Calibration Sheet Click the OK button. When the white calibration sheet is ejected from the paper output tray, the White Level Calibration process is complete. I Device Information When you select Device Information from the Option menu of the main IS Scan dialog box, you can verify the name of the printer that is currently connected to your system and information on the communication mode. · If the printer is connected using the parallel interface, Device Information displays a communication mode such as ECP/1 or ECP/2. · If the printer is connected using the USB interface, Device Information displays USB as the communication mode. Using the Scanner With Windows 38 Other IS Scan Features I Enlarging the Scanned Image in the Preview Area To enlarge the scanned image in the preview area, click the Enlarge icon ( select Large from the View menu. To return to the original size, click the Standard icon ( View menu. key) or select Normal from the key) or I Using Online Help When you click the symbol in the main IS Scan dialog box, the online Help for IS Scan opens so you can learn more about IS Scan. Using the Scanner With Windows 39 Using IS Scan Plus IS Scan Plus is a utility program that allows you to edit, enhance, print, and save an image acquired by the IS Scan scanner driver. You can use IS Scan Plus if you do not have a graphics application program. I Launching IS Scan Plus 1 2 Select Programs from the Start menu, then click IS Scan Plus. Select IS Scan Plus. The main IS Scan Plus screen appears: Using the Scanner With Windows 40 Using IS Scan Plus 3 Select an option: Copy Scan and immediately print an image without editing. Using Copy Capture Image Scan and edit an image other than a photographic print. Using Capture Image Capture Photo Scan and edit a photographic print such as a snapshot. Using Capture Photo Device Information Verify the name of the printer that is currently connected to your system and information on the communication mode. Using the Scanner With Windows 41 Using IS Scan Plus I Using Online Help When you need detailed instructions, click the Help button in the upper right of the main screen. You can access the online Help from all the screens that IS Scan Plus displays. I Verifying the Device Information Make sure that the printer is connected properly and is turned on, and click the Device Information button. · If the printer is connected using the parallel interface, Device Information displays a communication mode such as ECP/1 or ECP/2. · If the printer is connected using the USB interface, Device Information displays USB as the communication mode. I Closing IS Scan Plus When you wish to close IS Scan Plus, click the Exit button in the upper right of the main screen. You can access the Exit button from all the screens that IS Scan Plus displays. Using the Scanner With Windows 42 Using IS Scan Plus I IS Scan Buttons Returns to the main IS Scan Plus screen. Moves back to the previous screen. Displays the Edit screen. Editing a Scanned Image Prints a scanned image. Printing a Scanned Image Saves a scanned image. Saving a Scanned Image Using the Scanner With Windows 43 Using Copy Use the Copy feature when you wish to print an image immediately after scanning. You cannot edit or enhance the scanned image before printing. 1 Click the Copy button in the main IS Scan Plus screen. The Copy screen displays: Using the Scanner With Windows 44 Using Copy 2 Specify any required settings: · Select Color or Monochrome in the Document Type box. · Select Fine or Fast in the Copy Mode box. · Select the paper size in the Paper Size box. · The Copies box is disabled. 3 Click the Print Setting button. This displays the Print Setup dialog box. Make sure Canon BJC-85 is displayed as the default printer. Click the Properties button, if necessary, to display the Printer Properties dialog box and specify any printer settings. See your online BJC-85 User's Manual for details. Using the Scanner With Windows 45 Using Copy 4 5 6 Note When you click the Copy button, a message box appears. Click OK in the message box to confirm that the scanner cartridge is installed. Copying begins. Another dialog box appears to remind you to remove the scanner cartridge, and install the BJ cartridge according to your print job. Also, make sure paper is loaded in the auto sheet feeder of the printer. Click the OK button in the dialog box. Printing begins. · To print the image displayed in the Preview Area again, click the Reprint button. · To make a copy of another image using the same settings, click the Copy button. When a confirmation message appears, click the Yes button and repeat the procedure described above. · To make a copy using different settings, click the Clear button to clear the copied image from the preview area. Repeat the procedure described above. Using the Scanner With Windows 46 Using Capture Image Use the Capture Image feature to scan an image other than a photographic print. You can also edit, enhance, save, and print the scanned image. 1 Click the Capture Image button in the main IS Scan Plus screen. This displays the Capture Image screen. Using the Scanner With Windows 47 Using Capture Image 2 Select the most appropriate icon in the Scanning Mode box of the Capture Image screen according to your scanning purpose. Standard setting for scanning a color image. Standard setting for scanning a monochrome image. Suitable for scanning a photographic print such as a snapshot. Suitable for scanning an image that consists mostly of text. Used for customizing the settings for special scanning jobs. Using the Customized Scanning Mode 3 4 5 Select the paper size in the Paper Size box. Insert the image you wish to scan in the scanning holder, and then load it in the auto sheet feeder of the printer. Click the Prescan button. The remaining steps are similar to those described for Scanning an Image using IS Scan. Scanning an Image Using the Scanner With Windows 48 Using Capture Photo Use the Capture Photo feature to scan a photographic print such as a snapshot. You can also edit, enhance, save, and print the scanned image. 1 Click the Capture Photo button in the main IS Scan Plus screen. The Capture Photo screen displays: By default, a Selection Box displays in the Preview Area. To delete the Selection Box, point to any location in the Preview Area and right-click your mouse. Using the Scanner With Windows 49 Using Capture Photo 2 Specify these settings: · Select Color or Black & White in the Photo Type box. · Select Regular or Panorama in the Photo Size box. 3 4 Insert the image you wish to scan into the scanning holder, and then load it in the auto sheet feeder of the printer. Click the Prescan button. The remaining steps are similar to those described for Scanning an Image. Scanning an Image Using the Scanner With Windows 50