User manual CANON DIGITAL IXUS IIS

ENGLISH CANON INC. 30-2 Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON NORGE AS Hallagerbakken 110, Postboks 33, Holmlia, 1201 Oslo, Norway Tel: 22 62 93 21 Fax: 22 62 06 15 E-mail: helpdesk@canon.no http://www.canon.no Europa, Africa and Middle East CANON EUROPA N.V. PO Box 2262, 1180 EG Amstelveen, The Netherlands CANON (UK) LTD For technical support, please contact the Canon Help Desk: P.O. Box 431, Wallington, Surrey, SM6 0XU, UK Tel: (08705) 143723 Fax: (08705) 143340 http://www.canon.co.uk/Support/index.asp CANON COMMUNICATION & IMAGE FRANCE S.A. 102 Avenue du Général de Gaulle, 92257 LA GARENNE COLOMBES CEDEX, France Tel: Hotline 08 25 00 29 23 http://www.cci.canon.fr CANON DEUTSCHLAND GmbH Postfach 100401, 47704 Krefeld, Germany Customer Hotline: 0180/5006022 (0,12 / Min.) http://www.canon.de CANON ITALIA S.P.A. Via Milano 8, I-20097 San Donato Milanese (MI), Italy Tel: 02/8248.1 Fax: 02/8248.4604 Pronto Canon: 02/8249.2000 E-mail: supporto@canon.it http://www.canon.it CANON ESPAÑA S.A. C/Joaquín Costa, 41 - 28002 Madrid, Spain Tel. Atención al Cliente: 901.301.301 Helpdesk: 906.301.255 http://www.canon.es CANON BELGIUM N.V. / S.A. Bessenveldstraat 7, B - 1831 Diegem, Belgium Tel: (02) 722.04.11 Fax: (02) 721.32.74 Helpdesk : 0900-10627 http://www.canon.be CANON LUXEMBOURG S.A. Rue des Joncs 21, L-1818 Howald, Luxembourg Tel: (0352) 48 47 961 Fax: (0352) 48 47 96232 Helpdesk : 900-74100 http://www.canon.lu CANON NEDERLAND N.V. Neptunusstraat 1, 2132 JA Hoofddorp, The Netherlands Tel: 023 - 5 670 123 Fax: 023 - 5 670 124 Helpdesk: 023 - 5 681 681 http://www.canon.nl CANON DANMARK A/S Knud Højgaards Vej 1, DK-2860 Søborg, Denmark Tel: +45 44 88 26 66 http://www.canon.dk Finland CANON OY Huopalahdentie 24, FIN-00350 Helsinki, Finland Tel: 010 54420 Fax 010 544 30 HelpDesk 020 366 466 (1,47 snt/min + pvm) (ma-pe klo 9:00 - 17:30) E-mail: helpdesk@canon.fi http://www.canon.fi CANON SVENSKA AB Gustav III:s Boulevard 26, S-169 88 Solna, Sweden Helpdesk: 08-744 8620 Fax 08-744 8527 http://www.canon.se CANON (SCHWEIZ) AG Industriestrasse 12, 8305 Dietlikon, Switzerland Consumer Imaging Group Tel. 01-835-61 61 Hotline 0900 57 55 20 (CHF 2.13/min) http://www.canon.ch DIGITAL CAMERA Austria CANON GES.M.B.H. Zetschegasse 11, A - 1230 Wien, Austria Helpdesk Tel.: 01 66 146 412 Fax: 01 66 146 413 http://www.canon.at Portugal SEQUE ­ SOC. NAC. EQUIP., S.A. Pr. Alegria, 58 - 2ºC, 1269-149 Lisboa, Portugal Tel: (+351) 21 324 28 30 Fax: (+351) 21 347 27 51 E-mail: info@seque.pt http://www.seque.pt Camera User Guide Eastern Europe CANON CEE GMBH Oberlaaerstr 233, A-1100 Wien, Austria Tel: +43 1 680 88-0 Fax: +43 1 680 88-422 CIS CANON NORTH-EAST OY Huopalahdentie 24, 00350 Helsinki, Finland Tel: +358 10 544 00 Fax: +358 10 544 10 http://www.canon.ru Camera User Guide Please read the Read This First section (p. 7). Please also read the Canon Digital Camera Software Starter Guide Disk and the Direct Print User Guide. CEL-SE43A210 © 2004 CANON INC. PRINTED IN THE EU Flowchart and Reference Guides This Guide Shooting with the Camera Canon Digital Camera Software Starter Guide Disk Installing the Software This Guide Connecting the Camera to a Computer This Guide Canon Digital Camera Software Starter Guide Disk Downloading Images to a Computer Direct Print User Guide Printer User Guide Using the Printer and Printing Use of genuine Canon accessories is recommended. This product is designed to perform optimally when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/ or explosion of a battery pack). Please note that this warranty does not apply to repairs arising out of the malfunction of non-genuine Canon accessories, although you may request such repairs on a chargeable basis. Camera Body Temperature If your camera is used for prolonged periods, the camera body may become warm. Please be aware of this and take care when operating the camera for an extended period. About the LCD Monitor The LCD monitor is produced with extremely high-precision manufacturing techniques. More than 99.99% of the pixels operate to specification. Less than 0.01% of the pixels may occasionally misfire or appear as red or black dots. This has no effect on the recorded image and does not constitute a malfunction. Video Format Please set the camera's video signal format to the one used in your region before using it with a TV monitor (p. 128). Charging the Date/Time Battery · The camera has a built-in rechargeable lithium battery that maintains the date, time and other camera settings. This battery recharges when the main battery pack is inserted into the camera. When you first purchase the camera, place a charged battery pack in it or use the AC adapter kit (sold separately) for at least 4 hours to charge the date/time battery. It will charge even when the camera power is set to Off. · If the Date/Time menu appears when the camera power is turned on, it means that the date/time battery charge is depleted. Recharge it as described above. 1 About This Guide Conventions Used in the Text Icons on the right end of title bars show the applicable operating modes. As in the example below, the procedure can be performed in (Auto), (Manual), (Manual/Stitch Assist) or (Movie) mode. Using the Self-timer : This mark denotes issues that may affect the camera's operation. : This mark denotes additional topics that complement the basic operating procedures. Question? Look Here First What settings are available under each function? Will my settings remain in effect even after I've turned the camera off? · See Functions Available in Each Shooting Mode (p. 160). What can be accomplished with each function? · · · · · · · See FUNC.Menu (p. 42) See Rec. Menu (p. 46). See Play Menu (p. 47). See Set up Menu (p. 47). See My Camera Menu (p. 50). See Information Displayed on the LCD Monitor (p. 34). See Menu Settings and Factory Defaults (p. 46). What do the icons listed in the Camera User Guide mean? 2 Thumb Index Preparing the Camera Basic Functions Shooting Playback Erasing Print Settings/Transferring Connecting the Camera to a Computer/TV My Camera Settings List of Messages Troubleshooting Appendix Photo Tips and Information 18 30 53 89 105 108 118 129 134 136 140 149 3 Table of Contents Items marked with are lists or charts that summarize camera functions or procedures. Read This First Please Read............................................................................................... 7 Safety Precautions..................................................................................... 8 Preventing Malfunctions.......................................................................... 13 Components Guide ............................................ 14 Preparing the Camera Charging the Battery Pack ....................................................................... Installing the Battery Pack ....................................................................... Installing the SD Card.............................................................................. Setting the Date and Time ....................................................................... Setting the Language............................................................................... 18 21 23 26 28 Basic Functions Turning the Power On.............................................................................. 30 Using the LCD Monitor ............................................................................ 32 Information Displayed on the LCD Monitor ............................................. 34 Using the Viewfinder ............................................................................... 38 Using the Zoom ....................................................................................... 39 Pressing the Shutter Button .................................................................... 40 Selecting Menus and Settings ................................................................. 42 Menu Settings and Factory Defaults ........................................................ 46 Resetting Settings to Their Default Values............................................... 51 Shooting Shooting in Auto Mode ..................................................................... Reviewing an Image Right after Shooting................................................ Changing Resolution/Compression Settings ........................................... Quick Shots ............................................................................................. Using the Flash ................................................................................... Shooting Close-Ups/ Infinity Shots............................................ Using the Digital Zoom ............................................................................ Continuous Shooting ......................................................................... Using the Self-timer........................................................................... Shooting in Manual Mode ............................................................... Shooting a Movie ............................................................................ 53 54 55 57 58 60 62 63 64 66 67 4 Shooting Panoramic Images(Stitch Assist).............................................. 69 Shooting Hard-to-Focus Subjects (Focus Lock, AF Lock) ........................ 72 Locking the Exposure Setting (AE Lock) .................................................. 74 Locking the Flash Exposure Setting (FE Lock) ......................................... 75 Switching between Focusing Modes ........................................................ 76 Switching between Light Metering Modes ......................................... 77 Adjusting the Exposure Compensation .................................................... 78 Shooting in Long Shutter Mode ............................................................... 79 Adjusting the Tone (White Balance) ......................................................... 81 Changing the Photo Effect........................................................................ 84 Adjusting the ISO Speed .......................................................................... 85 Setting the Auto Rotate Function ............................................................. 86 Resetting the File Number........................................................................ 87 Playback Displaying Images Individually................................................................. 89 Magnifying Images............................................................................. 90 Viewing Images in Sets of Nine (Index Playback) ............................ 91 Viewing Movies........................................................................................ 93 Editing Movies ......................................................................................... 95 Rotating Images in the Display ................................................................ 97 Attaching Sound Memos to Images ......................................................... 98 Automated Playback (Slide Shows) ....................................................... 100 Protecting Images.................................................................................. 104 Erasing Erasing Single Images ..................................................................... 105 Erasing All Images ................................................................................. 106 Formatting SD Cards.............................................................................. 107 Printing About Printing........................................................................................ 108 Setting the DPOF Print Settings ............................................................. 110 Image Transmission Settings (DPOF Transfer Order) Selecting Images for Transferring......................................................... 116 5 Connecting the Camera to a Computer Connecting the Camera to a Computer .................................................. Computer System Requirements ...................................................... Downloading Images by Direct Transfer................................................ Connecting the Camera to the Computer to Download Images without Installing Software ............................................................... Downloading Directly from an SD Card ................................................. 119 119 123 125 126 Viewing Images on a TV set.................................... 127 Customizing the Camera (My Camera Settings) Changing My Camera Settings .............................................................. 129 Registering My Camera Settings ........................................................... 131 List of Messages ............................................ 134 Troubleshooting ............................................. 136 Appendix Using an AC Adapter Kit (Sold Separately) ............................................ 140 Camera Care and Maintenance .............................................................. 141 Specifications ........................................................................................ 142 Photo Tips and Information Tip for Using the Self-timer ................................................................... How to adjust the exposure ................................................................... ISO Speed.............................................................................................. Advanced Technique for the Macro mode ............................................. 149 149 150 150 Index .......................................................... 151 Functions Available in Each Shooting Mode ............ 160 6 Read This First Please Read Test Shots Before you try to photograph important subjects, we highly recommend that you shoot several trial images to confirm that the camera is operating and being operated correctly. Please note that Canon, its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of a camera or accessory, including SD memory cards, that results in the failure of an image to be recorded or to be recorded in a format that is machine readable. Warning Against Copyright Infringement Please note that Canon digital cameras are intended for personal use and should never be used in a manner that infringes upon or contravenes international or domestic copyright laws and regulations. Please be advised that in certain cases the copying of images from performances, exhibitions, or commercial properties by means of a camera or other device may contravene copyright or other legal rights even if the image was shot for personal use. Warranty Limitations For information on your camera's warranty, please refer to the Canon European Warranty System (EWS) Booklet supplied with your camera. For Canon Customer Support contacts, please see rear of this booklet or the European Warranty System (EWS) Booklet. 7 Safety Precautions · Before using the camera, please ensure that you read and understand the safety precautions described below. Always ensure that the camera is operated correctly. · The safety precautions noted on the following pages are intended to instruct you in the safe and correct operation of the camera and its accessories to prevent injuries or damage to yourself, other persons and equipment. · In the next few pages, the term "equipment" refers primarily to the camera and its power supply accessories, such as the battery charger and optional compact power adapter. Storing SD cards Store the SD memory card out of the reach of children and infants. It may be swallowed accidentally. If this occurs, consult a doctor immediately. Warnings · Do not aim the camera directly into the sun or at other intense light sources that could damage your eyesight. · Do not trigger the flash in close proximity to human or animal eyes. Exposure to the intense light produced by the flash may damage eyesight. In particular, remain at least one meter (39 inches) away from infants when using the flash. · Store this equipment out of the reach of children and infants. Accidental damage to the camera or batteries by a child could result in serious injury. In addition, placement of the strap around the child's neck could result in asphyxiation. · Do not attempt to disassemble or alter any part of the equipment that is not expressly described in this guide. Disassembly or alteration may result in high-voltage electrical shock. Internal inspections, alterations and repairs should be conducted by qualified service personnel authorized by your camera distributor or a Canon Customer Support Help Desk. 8 · To avoid the risk of high-voltage electrical shock, do not touch the flash portion of the camera if it has been damaged. Similarly, never touch internal portions of the equipment that become exposed as a result of damage. There is a risk of high-voltage electrical shock. Please take the first opportunity to consult your camera distributor or the closest Canon Customer Support Help Desk. · Stop operating the equipment immediately if it emits smoke or noxious fumes. Failure to do so may result in fire or electrical shock. Immediately turn the camera power off, remove the camera battery or unplug the power cable from the power outlet. Confirm that smoke or fume emissions have ceased. Please consult your camera distributor or the closest Canon Customer Support Help Desk. · Stop operating the equipment if it is dropped or the casing is damaged. Failure to do so may result in fire or electrical shock. Immediately turn the camera power off, remove the camera battery or unplug the power cable from the power outlet. Please consult your camera distributor or the closest Canon Customer Support Help Desk. · Do not allow the equipment to come into contact with, or become immersed in, water or other liquids. Do not allow liquids to enter the interior. The camera has not been waterproofed. If the exterior comes into contact with liquids or salt air, wipe it dry with a soft, absorbent cloth. If water or other foreign substances enter the interior, immediately turn the camera power off and remove the camera battery or unplug the power cable from the power outlet. Continued use of the equipment may result in fire or electrical shock. Please consult your camera distributor or the closest Canon Customer Support Help Desk. · Do not use substances containing alcohol, benzene, thinners or other flammable substances to clean or maintain the equipment. The use of these substances may lead to fire. · Remove the power cable on a regular periodic basis and wipe away the dust and dirt that collects on the plug, the exterior of the power outlet and the surrounding area. In dusty, humid or greasy environments, the dust that collects around the plug over long periods of time may become saturated with humidity and short-circuit, leading to fire. 9 · Do not cut, damage, alter or place heavy items on the power adapter cable. Any of these actions may cause an electrical short circuit, which may lead to fire or electrical shock. · Do not handle the power cable if your hands are wet. Handling it with wet hands may lead to electrical shock. When unplugging the cable, ensure that you hold the solid portion of the plug. Pulling on the flexible portion of the cable may damage or expose the wire and insulation, creating the potential for fires or electrical shocks. · Use only recommended power accessories. Use of power sources not expressly recommended for this equipment may lead to overheating, distortion of the equipment, fire, electrical shock or other hazards. · Do not place the batteries near a heat source or expose them to direct flame or heat. Neither should you immerse them in water. Such exposure may damage the batteries and lead to the leakage of corrosive liquids, fire, electrical shock, explosion or serious injury. · Do not attempt to disassemble, alter or apply heat to the batteries. There is serious risk of injury due to an explosion. Immediately flush with water any area of the body ­ including the eyes and mouth, or clothing ­ that comes into contact with the inner contents of a battery. If the eyes or mouth contact these substances, immediately flush with water and seek medical assistance. · Avoid dropping or subjecting the batteries to severe impacts that could damage the casings. It could lead to leakage and injury. · Do not short-circuit the battery terminals with metallic objects, such as key holders. It could lead to overheating, burns and other injuries. Use the supplied terminal cover to transport or store the battery pack. · Before you discard a battery, cover the terminals with tape or other insulators to prevent direct contact with other objects. Contact with the metallic components of other materials in waste containers may lead to fire or explosions. Discard the batteries in specialized waste facilities if available in your area. · Use only recommended batteries and accessories. Use of batteries not expressly recommended for this equipment may cause explosions or leaks, resulting in fire, injury and damage to the surroundings. 10 · Use the specified battery charger to charge Battery Pack NB-3L. Use of other chargers may lead to overheating, distortion of the equipment, fire or electrical shock. · Disconnect the battery charger and compact power adapter from both the camera and the power outlet after recharging and when it is not in use to avoid fire and other hazards. Continuous use over a long period may cause a unit to overheat and distort, resulting in fire. · The camera terminals of the battery charger and compact power adapter are designed for exclusive use with your camera. Do not use them with other products or batteries. There is a risk of fire and other hazards. Caution about magnetic fields Keep objects that are sensitive to magnetic fields (such as credit cards) away from the speaker of the camera (p. 15). Such items may lose data or stop working. 11 Cautions · Avoid using, placing or storing the equipment in places subject to strong sunlight or high temperatures, such as the dashboard or trunk (boot) of a car. Exposure to intense sunlight and heat may cause the batteries to leak, overheat or explode, resulting in fire, burns or other injuries. High temperatures may also cause deformation of the casing. Ensure that there is good ventilation when using the battery charger to charge the battery pack. · Do not store the equipment in humid or dusty areas. Storage in such areas could lead to fire, electrical shock or other damage. · Be careful not to bang the camera or subject it to strong impacts or shocks that could lead to injury or damage the equipment when wearing or holding it by the strap. · Be careful not to cover the flash with your fingers or clothing when shooting. The flash may be damaged and emit smoke or noise. In addition, do not touch the surface of the flash after taking several pictures in rapid succession. Either action could result in burns. · Do not operate the flash with dirt, dust or other items stuck to its lens. The resulting heat build-up could damage the flash. · Ensure that the battery charger is plugged into a power outlet of the specified rating, not over the specified rating. The plug of the battery charger varies according to region. · Do not use the battery charger or compact power adapter if the plug or cable is damaged, or if the plug is not fully inserted into the power outlet. · Do not allow metal objects (such as pins or keys) or dirt to contact the charger terminals or plug. · If your camera is used for prolonged periods, the camera body may become warm. Please take care when operating the camera for extended periods as your hands may experience a burning sensation. 12 Preventing Malfunctions Avoid Strong Magnetic Fields Never place the camera in close proximity to electric motors or other equipment generating strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt image data. Avoid Condensation Related Problems Moving the equipment rapidly between hot and cold temperatures may cause condensation (water droplets) to form on its external and internal surfaces. You can avoid this by placing the equipment in an airtight, resealable plastic bag and letting it adjust to temperature changes slowly before removing it from the bag. If Condensation Forms Inside the Camera Stop using the camera immediately if you detect condensation. Continued use may damage the equipment. Remove the SD card, battery pack or compact power adapter from the camera and wait until the moisture evaporates completely before resuming use. Extended Storage When not using the camera for extended periods of time, remove the battery pack and store the equipment in a safe place. Storing the camera for extended periods with a battery pack installed will run down the battery pack and may damage the camera. The date, time and other camera settings may reset to default settings if the battery pack has been removed for more than three weeks. Follow the instructions in this guide to reset the desired settings. 13 Components Guide Front View Viewfinder Window (p. 38) AF-assist Beam (p. 41) Red-eye Reduction Lamp (p. 58) Self-timer Lamp (p. 64) Flash (p. 58) Microphone (p. 98) DIGITAL Terminal (p. 120) A/V Out (Audio/Video Out) Terminal (p. 127) Lens Wrist Strap Mount Terminal Cover Attaching the Wrist Strap* * Be careful not to wave the camera about or catch it on other items when dangling it from the wrist strap. 14 Back View Viewfinder (p. 38) Preparing the Camera Speaker SD Card Slot/ Battery Cover (pp. 21, 23) DC Coupler Terminal Cover (p. 140) LCD Monitor (p. 32) Tripod Socket The following cables are used to connect the camera to a computer or printer. Computer (p. 120) Interface Cable IFC-400PCU (supplied with the camera) Direct Print Compatible Printers (Sold Separately) · CP Printers Interface Cable IFC-400PCU (supplied with camera) or the Direct Interface Cable DIF-100 (supplied with the CP-100/CP-10). · Bubble Jet Printers - Bubble Jet Direct Compatible Printers: Please refer to your Bubble Jet printer user guide. - PictBridge Compliant Printers: Interface Cable IFC-400PCU (supplied with the camera) · PictBridge Compliant Non-Canon Printers: Interface Cable IFC-400PCU (supplied with the camera) Please refer to the System Map or the Direct Print User Guide supplied with the camera for direct print compatible printer information. 15 Operation Panel ON/OFF Button (p. 30) Power Lamp Indicators (p. 17) Lights when the power is on or transmission preparations are complete when connected to a computer Shutter Button (p. 40) Zoom Lever Shooting: (Telephoto)/ (Wide Angle) (p. 39) Playback: (Magnify) (p. 90)/ (Index) (p. 91) Mode Switch (p. 17) Print/Share Button (See below) (Light Metering) Button (p. 77)/ Button (Flash) Button (p. 58)/ Button (Continuous) Button (p. 63)/ (Self-timer) Button (p. 64)/ Button (Macro) / (Infinity) Button (p. 60)/ Button FUNC. (Function) Button (p. 42)/ (Single Image Erase) Button (p. 105) DISP. (Display) Button (p. 32) MENU Button SET Button The following operations are accessible through one easy press of the (Print/Share) button. · Printing: See the Direct Print User Guide (separate from this guide) · Downloading images (Windows only): See p.118 of this guide and the Canon Digital Camera Software Starter Guide Disk (separate from this guide) The indicator blinks or lights during a printer or computer connection. Blue: Ready to print/Ready to transfer images Blinking blue: Printing/Transferring 16 Indicator The indicator lights or blinks when the ON/OFF button or shutter button is pressed. Upper Indicator Green: Ready to shoot Blinking Green: Recording to SD card / Reading SD card / Erasing from SD card/Transmitting data (during a computer connection) Orange: Ready to shoot (flash on) Blinking Orange: Ready to shoot (camera shake warning) Preparing the Camera Lower Indicator Yellow: Macro mode / Infinity mode/ AF lock Blinking Yellow: Focusing difficulty (single beep). Although you can still press the shutter button when the indicator blinks yellow, you are recommended to shoot using the focus lock or AF lock (p. 72). Mode Switch Use the mode switch to select the camera's operating mode Shooting Mode Auto Most settings are automatically selected by the camera (p. 53) The exposure compensation, white balance, photo effect and Manual other settings can be manually selected (p. 66) Movie Shoots movie clips (p. 67) Playback Mode Play· Download and display images on a connected computer (p. 118). back · Print images directly to a connected printer (p. 108). · Playback or delete images from the SD card (pp. 89, 105). When a printer (sold separately) is properly connected, the or icon appears on the LCD monitor. , 17 Preparing the Camera Charging the Battery Pack Use the following procedures to charge the battery pack the first time you use the camera or when the "Change the battery pack" message displays. 1 Insert the battery pack into the battery charger. Align the battery pack according to the arrows on the battery and the charger. Insert the battery securely. 2 Battery charger model names and types vary by region. (For CB-2LU) Plug the battery charger into a power outlet. Charge Indicator (For CB-2LUE) Attach the power cord to the battery charger and plug it into a power outlet. · The charge indicator will light red while the battery pack is charging. It will change to green when the charge is complete. · After charging, unplug the battery charger and remove the battery pack. To protect the battery pack and prolong its life, do not charge it for longer than 24 hours continuously. 18 · Since this is a lithium ion battery pack, you need not completely discharge it before recharging. It can be recharged at any point. However, since the maximum number of charge cycles is approximately 300 times (battery life), you are recommended to charge the battery pack after having discharged it completely to prolong battery life. · It takes approximately 95 minutes to fully charge the battery pack from a fully discharged state (based on Canon's testing standard). Charging it within a temperature range of 5° to 40 °C (41° to 104 °F) is recommended. · Charge times may vary according to the ambient temperature and the battery pack's charge state. · See Battery Capacity (p. 145). · You may hear a noise during charging. This is not a malfunction. Preparing the Camera Handling Precautions Keep the battery pack terminals ( ) clean at all times. Dirty terminals may cause poor contact between the battery pack and camera. Polish the terminals with a tissue or a dry cloth before charging or using the battery pack. Do not rapidly overturn or wave the battery charger around when it contains the battery pack. The battery pack could fly out. At low temperatures, battery pack performance may be reduced and the low battery icon may appear earlier than usual. Under these conditions, resuscitate the battery pack by warming it in a pocket immediately before use. However, ensure that there are no metallic items in the pocket that could cause a short circuit, such as a key holder, etc. Do not place anything, such as tablecloths, carpets, bedding or cushions, on top of the battery charger while it is charging. Heat will build up and could result in a fire. Do not charge batteries other than Battery Pack NB-3L in this charger. The battery pack continues to discharge a minimal portion of its power while installed in the camera, even with the power off, or in the charger. This will shorten battery life. 19 Do not allow any metal objects Fig. A Fig. B such as key rings to touch the and terminals (Fig. A), as this can damage the battery pack. To carry the battery pack or store it during periods of disuse, always replace the terminal cover (Fig. B). Even charged battery packs continue to discharge naturally. You are advised to charge the battery on the day of use, or one day before, to ensure a full charge. Since storing a fully charged battery pack for long periods of time (about 1 year) can shorten its life cycle or affect performance, you are recommended to use the battery pack in the camera until it is completely discharged and to store it at normal temperature (23 °C/73 °F) or lower. If you do not use the battery pack for long periods of time, charge it fully and discharge it fully in the camera at least once a year before returning it to storage. If the performance of the battery pack diminishes substantially even when it is fully charged, its life has been exceeded and it should be replaced. 20 Installing the Battery Pack Install Battery Pack NB-3L (supplied). Please recharge the battery pack (p. 18) before you use it for the first time. Preparing the Camera 2 1 Slide the SD card slot/battery cover in the direction of the arrows. 1 2 Press the battery lock while inserting the battery pack all the way in until the lock clicks. · Insert the battery pack correctly by aligning the arrows on the camera and the battery pack. · To remove the battery pack, press the battery lock and pull the battery pack out. Battery Lock 1 3 Slide the SD card slot/battery cover closed. 2 21 · Do not turn off the power or open the SD card slot/battery cover while the upper indicator beside the viewfinder blinks green. The camera is writing, reading, erasing or transmitting an image to or from the SD card. · Remove the battery pack when the camera is not in use. Please note, however, that the date, time and other camera settings may reset to the default settings if the battery pack has been removed for more than three weeks. Please use an AC Adapter Kit ACK900 (sold separately) for extended use of the camera (p. 140). Battery Pack Charge The following icons and messages will display when the battery pack charge is low. Battery pack charge is low. Recharge it as soon as possible before it is required for an extended period. When the LCD monitor is off, this icon will display when you press any button other than the ON/OFF, SET or MENU button. Change the battery pack Battery charge is insufficient to operate the camera. Replace the battery pack immediately. See Battery Capacity (p. 145). 22 Installing the SD Card Write Protect Tab The SD card has a write protect tab. Sliding the tab downward prevents recording of data and protects existing data (e.g. images). When recording to, erasing from or formatting the SD card, slide the tab upward. Preparing the Camera Write Protect Tab Writing/Erasing possible Writing/Erasing impossible Turn the camera power off and insert the SD card with the following procedures. 2 1 Slide the SD card slot/battery cover in the direction of the arrows. 1 2 Back Terminals Insert the SD card. · Insert the SD card as shown on the bottom of the camera until you hear it click into place. · Do not touch or allow metal objects to contact the terminals. 23 1 3 Slide the SD card slot/battery cover closed. 2 To remove the SD card Push in the SD card until you hear it click, then release it. · Since the camera is writing, reading, erasing or transmitting data to or from the SD card when the upper indicator beside the viewfinder blinks green, never perform the following actions during this time. It could corrupt the image data. - Subject the camera body to vibration or shocks. - Turn the camera's power off, or open the SD card slot/battery cover. · Please note that SD cards formatted with other manufacturers' cameras or a computer, or formatted or edited with application programs, may slow down writing to the SD card or may not operate correctly in the camera. · You are recommended to use SD cards that have been formatted in your camera (p. 107). The card supplied with the camera may be used without further formatting. See SD Cards and Estimated Capacities (p. 146). 24 Handling Precautions for SD Cards SD cards are high-precision electronic devices. Do not bend them, apply force to them, or subject them to shocks or vibration. Do not attempt to disassemble or alter the SD card. Do not allow dirt, water or foreign objects to contact the terminals on the back of the card. Do not touch the terminals with your hands or metal objects. Do not peel away the original label on the SD card or cover it with another label or sticker. When writing on the SD card, use a soft point pen (e.g. felt-tip pen). Using a sharp point pen (e.g. ball-point pen) or pencil may damage the SD card or corrupt the recorded data. Since some or all of the data recorded on the SD card may be corrupted or erased by electrical noise, static electricity or card malfunction, making a backup copy of important data is recommended. Moving an SD card rapidly between temperature extremes will cause condensation to form in the card and lead to a malfunction. To avoid condensation, place the SD card in a sealed plastic bag before moving it into a different temperature zone and allow it to adjust slowly to the new temperature. If condensation forms on the SD card, store it at room temperature until the water droplets have evaporated naturally. Do not use or store SD cards in the following locations. - Locations subject to dust or sand - Locations subject to high humidity and high temperatures Preparing the Camera Precaution for Multi Media Cards This camera is designed to perform optimally when used with genuine Canon-brand SD cards. You may use multi media cards (MMC) with this camera. However, Canon makes no warranties concerning the use of multi media cards (MMC). 25 Setting the Date and Time The Date/Time menu will appear the first time the camera power is turned on or whenever the built-in rechargeable lithium date/time battery charge is low. Start from Step 5 to set the date and time. 1 Power Lamp Press the ON/OFF button until the power lamp lights. 2 3 Press the MENU button. The (Rec.) or displayed. (Play) menu is Use the or button to select the (Set up) menu. 4 Use the or button to select and press the SET button. 26 5 Set the date and time. · Use the or button to select a field (year, month, day, hour, minute and date format). · Use the or button to change its value. Preparing the Camera 6 7 Press the SET button. The setting is complete. Press the MENU button. The display will return to the Shooting or Playback screen. · Please note that the date and time settings may reset to the default settings if the camera battery has been removed for more than three weeks. Reset them when this occurs. · Setting the date and time settings does not cause the date/time stamp to appear on images. For printing images with the date on them, refer to the Direct Print User Guide or Canon Digital Camera Software Starter Guide Disk. Charging the Date/Time Battery - The camera has a built-in rechargeable lithium battery for saving settings such as the date and time. This battery is recharged by the battery pack while it is in the camera. Right after purchasing the camera, leave a charged battery pack in the camera, or plug in AC Adapter Kit ACK900 (sold separately), for about 4 hours to charge the date/time battery. It will charge even when the camera power is turned off. - If the Date/Time menu appears when the camera power is turned on, the date/time battery charge is low. Use the above method to recharge it. 27 Setting the Language Use this feature to select the language for the LCD monitor display. 1 Power Lamp Press the ON/OFF button until the power lamp lights. 2 3 Press the MENU button. The (Rec.) or displayed. (Play) menu is Use the or button to select the (Set up) menu. 4 Use the or button to select and press the SET button. 28 5 Use the , , or button to select a language and press the SET button. Preparing the Camera 6 Press the MENU button. The display will return to the Shooting or Playback screen. The Language menu can also be displayed in playback mode by holding down the SET button and pressing the MENU button. This function cannot be used while a movie clip is played back, or a separately sold printer is connected to the camera. 29 Basic Functions Turning the Power On Press the ON/OFF button until the power lamp lights green. Power Lamp · The lens extends when the mode switch is set to , or . · The lens retracts approximately 1 minute after setting the mode switch from , or to . · When the mode switch is set to or , the LCD monitor turns on. (When the mode switch is set to , the upper indicator beside the viewfinder blinks green.) To turn the power off Press the ON/OFF button again. · If the "Card locked!" message appears right after the power is turned on, the SD card cannot record (p. 23). · The Date/Time menu will appear the first time the camera power is turned on or whenever the built-in rechargeable lithium battery charge is low. Reset the date and time when this occurs (p. 26). · If the power saving function activates, press the ON/OFF button to restore power. (p. 31) · You will hear a start-up sound and see the start-up image when the power is turned on. (To change the start-up sound and image, see p. 48, 50, 129) · The start-up image does not display when the LCD monitor is turned off in shooting mode or when the camera is connected to a TV via the A/V Out terminal. Turning On the Camera without the Start-Up Sound and Start-Up Image Hold the SET button down while turning on the power. 30 Power Saving Function This camera is equipped with a power saving function. When this function is turned on and it activates, restore power by pressing the ON/OFF button. Shooting Mode: Powers down approximately 3 minutes after the last control is accessed on the camera. The LCD monitor automatically turns off 1 minute* after the last control is accessed even if [Auto Power Down] is set to [Off]. (Press any button except the ON/OFF button to turn the LCD monitor back on.) * This time can be changed (p. 48). Basic Functions Playback Mode: Powers down approximately 5 minutes after the last control is accessed on the camera. Connected to a Printer (sold separately): Powers down approximately 5 minutes after the last control is accessed on the camera or on a connected printer. · The power saving function will not activate during slide show or while the camera is connected to a computer. · The power saving function can be turned off (p. 48). 31 Using the LCD Monitor The LCD monitor can be used to compose images while shooting, adjust menu settings and play back recorded images. Icons showing the camera's status and setting contents appear on the LCD monitor. The image in the LCD monitor will darken in strong sunlight or bright light. This does not constitute a malfunction. Shooting Mode ( , , ) Press the DISP. button. The display mode changes as follows with each press. Standard (No Information) Detailed (Information View) Off · The LCD monitor setting (On or Off) is saved by the camera when the power is turned off so that the same setting is automatically available when the power is turned on again. However, the setting may be lost when the power has been turned off after the "Change the battery pack" message has displayed, while the LCD monitor was on in shooting mode. · In the mode, the LCD monitor turns on regardless of its On/Off setting. 32 Playback Mode ( ) , the LCD monitor will turn on. When the mode switch is set to Press the DISP. button. The display mode changes as follows with each press. Standard Basic Functions Detailed No Information In Index playback mode (p. 91), the detailed display is not available. 33 Information Displayed on the LCD Monitor When shooting or playing back images, the shooting information or play back information appears on the LCD monitor. Shooting Mode When setting the flash, continuous mode, self-timer, macro mode, infinity mode, or the metering method, the shooting information displays on the LCD monitor for approximately 6 seconds even if the LCD monitor is set to [Standard (No Information)] or [Off]. (It may not display under some circumstances, depending on the selected settings.) A slow shutter speed has likely been selected because of insufficient lighting if the upper indicator beside the viewfinder blinks orange after the metering preparations are complete and the camera shake icon appears in the LCD monitor. Set the flash to or , or affix the camera to a tripod to shoot. · Right after a shot is taken, the image and its information appear in the LCD monitor for 2 seconds (or for the number of seconds selected if the review time was changed (2 ­ 10 sec.)) even if you release the shutter button. If the SET button is pressed while an image is displayed, it will continue to display (p. 54) · While a recorded image is displayed on the LCD monitor, you can check the exposure with the graph (see Histogram Function p.37) that shows the distribution of the brightness data. If the exposure requires adjustment, set the exposure compensation and reshoot. (Press the DISP. button if the histogram and other information is not shown) 34 Exposure Compensation (p. 78) Long Shutter Mode (p. 79) White Balance (p. 81) ISO Speed (p. 85) Photo Effect (p. 84) Compression (p. 55) * Low Battery (p. 22) Quick Shot (p. 57) Metering Mode (p. 77) Basic Functions Shooting Method (p. 63, 64) Macro/Infinity (p. 60) Flash (p. 58) Auto Rotate (p. 86) Resolution (p. 55) * Camera Shake Warning (p. 34) * Shooting Mode (p. 17, 69) (Red)* Movie Recording (p. 67) Digital Zoom (p. 62) 2.6x 3.2x 4.0x 4.9x 6.4x * Spot AE Point Frame ( * AF Frame (p. 76) Mode) * AE Lock (p. 74) * FE Lock (p. 75) * AF Lock (p. 72) Shots Remaining or Remaining Movie Time/Elapsed Time * Appears even if the LCD monitor is set to [Standard (No Information)]. Zoom powers indicate the combined optical and digital amount of zoom. These figures appear when the digital zoom is activated. 35 Playback Mode (Standard Display) File Number Image Number Protection Status (p. 104) Shooting Date Resolution (Still Images) (p. 55) Movie (p. 93) WAVE Format Sound (p. 98) Compression (Still Images) (p. 55) Playback Mode (Detailed Display) Histogram Long Shutter Mode (p. 79) Shooting Mode (p. 17, 69) Exposure Compensation (p. 78) Flash (p. 58) Macro/Infinity (p. 60) Metering Mode (p. 77) Movie Length Shown on Movie Files (p. 67) White Balance (p. 81) Photo Effect (p. 84) ISO Speed (p. 85) Resolution (Movies) (p. 55) 36 The following information may also be displayed with some images. A sound file in a format other than the WAVE format is attached or the file format is not recognized. JPEG file with format not conforming to Design rule for Camera File System Standards RAW format file File with unrecognized format Please note that image information recorded by this camera may not display correctly on other cameras and image information recorded by other cameras may not display correctly on this camera. Basic Functions Histogram Function The histogram is a graph that allows you to judge the brightness of the shot image. The greater the bias toward the left in the graph, the darker the image. The greater the bias toward the right, the brighter the image. If the image is too dark, adjust the exposure compensation to a positive value. Similarly, adjust the exposure compensation to a negative value if the image is too bright (p. 78). Sample Histograms Dark Image Balanced Image Bright Image 37 Using the Viewfinder The viewfinder can be used to conserve power by setting the LCD monitor to Off (p. 32) while shooting. Shows the center of the image View Finder Image Seen in Viewfinder vs. Recorded Image Usually the recorded image is wider than the image seen in the viewfinder. Confirm the actual image size with the LCD monitor. The image recorded may differ from the image seen in the viewfinder due to the distance between the viewfinder and lens (especially with close-ups). If you use the viewfinder to take close-up shots, portions of the close-up subject may not appear in the recorded image. Use the LCD monitor when taking close-up shots. About the Autofocus Function This camera employs AiAF (artificial intelligence autofocus) technology which uses a broad metering field to calculate the focal distance with high precision. It delivers a crisp focus even when the photographic subject is slightly off-center. The AiAF function can be turned off so that the autofocus is metered from a fixed AF frame at the center of the field (p. 76). 38 Using the Zoom The zoom can be adjusted from 35 mm to 70 mm in 35 mm film equivalent terms. Telephoto/Wide Angle 1 Press the zoom lever toward or . · Press the zoom lever toward in (telephoto). · Press the zoom lever toward out (wide angle). to zoom to zoom Basic Functions Digital Zoom When the LCD monitor is on, you can shoot with a combined optical and digital zoom up to approximately 6.4x (p. 62). The digital zoom is unavailable in some modes (p. 160). Images become coarser the more they are digitally zoomed. 39 Pressing the Shutter Button The shutter button features a two-stage action. Pressing Halfway Pressing halfway automatically sets the exposure and focus. Press the shutter button halfway. Indicator Status Indicator Upper Indicator · Green: Metering complete (two beeps sound) · Orange: Flash will fire · Blinking Orange: Camera shake warning/ Insufficient exposure Lower Indicator · Yellow: Macro mode/Infinity mode/AF lock (p. 72) · Blinking Yellow: Focusing difficulty* (single beep sounds) * Use the focus lock or AF lock to shoot when the indicator blinks yellow (p. 72). AF Frame Status (LCD Monitor On) AiAF On (p. 76) · Green Frame: Metering complete (focused AF frame) · No Frame: Focusing difficulty (single beep sounds) AiAF Off (p. 76) (Center AF Frame) · Green Frame: Metering complete · Yellow Frame: Focusing difficulty (single beep sounds) 40 Pressing Fully Pressing the shutter button down fully activates the shutter and causes the shutter sound to sound. Press the shutter button fully. While the image is being recorded to the SD card, the upper indicator beside the viewfinder blinks green. Shots cannot be taken while the flash is charging. Basic Functions AF-assist Beam · The AF-assist Beam will sometimes emit when the shutter button is pressed halfway to assist focusing in certain conditions, i.e., dark conditions. · The AF-assist Beam can be turned off (p. 46). For example, if animals are your subject, turn off the beam when shooting in the dark to avoid startling them. However, please keep in mind the following facts. - Turning the AF-assist Beam off or shooting in dark places may make it more difficult for the camera to focus. - The red-eye reduction lamp may emit when the flash is set to or even if the AF-assist Beam is turned off. 41 Selecting Menus and Settings Menus are used to adjust shooting and playback settings, as well as other camera settings like the Date/Time and sounds. Menus are displayed by pressing the FUNC. or MENU button according to the circumstances. Use the LCD monitor to perform the following procedures. Selecting Menu Settings with the FUNC. Button (Shooting Mode only) 1 2 3 4 Set the mode switch to (Auto), (Movie). (Manual) or Press the FUNC. button. The icons of the items that can be adjusted appear at the LCD monitor's left edge. Use the item. or button to select an See FUNC Menu on the next page for the menu items available. Use the option. or button to select an · Some menu items can only be selected after pressing the SET button to display the next menu. Press the SET button again to confirm the setting. · You can shoot right after performing these steps. The menu displays again after the shot, allowing you to change the settings easily. 5 42 Press the FUNC. button. The menu will close. FUNC. MENU ( ) Exposure Compensation (p. 78) ( ) Photo Effect (p. 84) Basic Functions (1) Long Shutter Mode (p. 79) ( ) Compression (p. 55) ( ) White Balance (p. 81) ( ) Resolution (p. 55) ( ) ISO Speed (p. 85) ( ) Resolution (Movie) (p. 55) ( ) Items in parentheses show default settings. 43 Selecting Menu Settings with the MENU Button 1 2 Set the mode switch to (Auto), (Movie) or (Manual), (Playback). Press the MENU button. In Shooting mode, the appears. In Playback mode, the appears. (Rec.) menu (Play) menu 3 Use the menu. or button to select a · Select the menu with the / , or icon in the upper left corner of the LCD monitor selected. · The zoom lever lets you select the menu even if the / , or icon is not selected. 4 5 Use the item. or button to select an See Menu Settings and Factory Defaults (p. 46) for the menu items. Use the option. or button to select an Menu items followed by an ellipsis (...) can only be selected after pressing the SET button to display the next menu. Press the SET button again to confirm the setting. 6 Press the MENU button. In Shooting mode, the menu can be closed by pressing the shutter button halfway. 44 See Setting the DPOF Print Settings for the procedures for the (Print Order) item in the Play menu. Shooting Mode Playback Mode Rec. Menu (The menu will appear slightly different depending on the Shooting mode) Play Menu Basic Functions Set up My Camera Menu · When the My camera menu is displayed, pressing the button returns to the Rec./Play menu. · When the Rec./Play menu is displayed, pressing the button displays the My camera menu.