User manual CANON ELURA 50

PUB. DIM-491 DV NETWORK SOLUTION DISK Software Instruction Manual Mode d'emploi du logiciel E Manual de Instrucciones del software This software is for use with Windows® XP only. Ce logiciel ne peut être employé que sous Windows® XP. Este software solamente es compatible con Windows® XP. Read Carefully Before Using CANON SOFTWARE LICENCE AGREEMENT IMPORTANT: READ THIS AGREEMENT CAREFULLY BEFORE CLICKING "YES" AT THE BOTTOM OF THE SCREEN AND INSTALLING THE SOFTWARE. This agreement ("Agreement") is a legal contract between you, either an individual or entity, and Canon Inc. ("Canon") governing your use of this software program and "online" or electronic documentation, if any (collectively, the "SOFTWARE"). BY CLICKING "YES" BELOW, YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, YOU MAY NOT INSTALL OR OTHERWISE USE THE SOFTWARE. IN SUCH CASE, CLICK "NO" BELOW, CLOSE THIS SET UP PROGRAM AND EXIT THIS SCREEN; IF YOU OBTAINED THIS SOFTWARE THROUGH A RETAILER, PLEASE RETURN THE PACKAGE TO WHERE YOU OBTAINED IT. In consideration of the right to use the SOFTWARE, you agree to abide by the terms and conditions of this Agreement. 1. GRANT OF LICENSE Canon grants you the personal, non-exclusive, non-transferable license to use ("use" shall mean storing, loading, installing, executing or displaying) the SOFTWARE on a single computer solely for use with Canon's digital video camcorder products. You may physically transfer the SOFTWARE from one computer to another, provided that the SOFTWARE is used on only one computer at a time. You shall not install or use the SOFTWARE on a network, multiple CPU, multiple site arrangement, or any other hardware configuration where the SOFTWARE is accessible to more than one CPU or to more than one user. You may make one copy of the SOFTWARE solely for backup purposes, or copy the SOFTWARE onto the permanent storage device (e.g. hard disk) of your computer and retain the original for back-up purposes, provided that you shall reproduce on such backup copy the same copyright notice and other ownership legends exactly as and where they appear on the SOFTWARE as delivered. Any other copying of the SOFTWARE is a violation of this Agreement. RESTRICTIONS You shall not, or allow any third party to, assign, sublicense, sell, rent, lease, loan, convey or otherwise use, transfer, copy, translate, convert to another programming language, alter, modify, decompile or disassemble the SOFTWARE, in whole or in part, except as expressly provided for or granted herein. You shall not remove, obliterate or cancel any copyright notice appearing on the SOFTWARE or on a medium, if any, on which the SOFTWARE delivered. OWNERSHIP All rights, including but not limited to copyrights and trade secret rights, to the SOFTWARE belong to Canon, its affiliated corporations and third party licensors. Your use of the SOFTWARE is subject to the laws of the United States, and Canada, and other applicable copyright and trademark laws, and nothing in this Agreement constitutes a waiver of the rights of Canon, its affiliated corporations and third party licensors under such laws. You only own the CD-ROM media in which the SOFTWARE is stored. Except as expressly provided herein, no license or right, express or implied, is hereby conveyed or granted by Canon to you for any intellectual property of Canon. EXPORT RESTRICTIONS You agree to comply with all export laws and restrictions and regulations of the country involved, and not to export or re-export, directly or indirectly, the SOFTWARE in violation of any such laws and restrictions and regulations, or without all necessary approvals. SUPPORT AND UPDATE Neither Canon, nor its subsidiaries, dealers or distributors will be responsible for providing maintenance or support for use of the SOFTWARE. No updates, fixes or support will be made available for the SOFTWARE. LIMTIED WARRANTY AND DISCLAIMER OF LIABILITY It is your responsibility to choose, maintain and match the hardware and software components of your computer system. Thus, Canon does not guarantee uninterrupted service or correction of errors or that the functions or performance pf the SOFTWARE will meet your requirements. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, CANON AND ITS SUPPLIER PROVIDE THE SOFTWARE "AS IS" WITHOUT WARRANTY OR CONDITION OF ANY KIND, EITHER EXPRESS, IMPLIED OR STATUTORY. The CD ROM storing the SOFTWARE, if any, is warranted only against defective material under normal use for a period of ninety (90) days after purchase from an authorized Canon dealer as evidenced by your sales receipt. Your sole remedy for a defective CD-ROM shall be replacement of the same without charge when returned by you at your expense to your point of purchase and proven to be defective upon inspection. The Replacement CD-ROM will be warranted for the remainder of the original ninety-day (90) warranty period of the defective CD-ROM. This limited warranty does not apply if the failure of the CD-ROM resulted from accident, abuse, or misapplication of the SOFTWARE and shall not extend to anyone other than the original user of the SOFTWARE. 2. 3. 4. 5. 6. 2 EXCEPT AS SPECIFICALLY SET FORTH HEREINABOVE, CANON, CANON'S SUBSIDIARIES, DISTRIBUTORS AND DEALERS DISCLAIM ALL WARRANTIES, OR CONDITIONS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO, WARRANTIES OR CONDITIONS AS TO DESIGN, QUALITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OF SYSTEM INTEGRATION. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL CANON, CANON'S SUBSIDIARIES AND AFFILIATES, THEIR DISTRIBUTORS AND DEALERS BE LIABLE FOR ANY LOSS OR DAMAGES WHATSOEVER (WHETHER KNOWN, FORESEEABLE OR OTHERWISE), INCLUDING WITHOUT LIMITATION, ANY CONSEQUENTIAL, INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE, OR OTHER DAMAGES WHATSOEVER (INCLUDING, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF CONFIDENTIAL OR OTHER BUSINESS INFORMATION, FOR LOSS OF PRIVACY, ARISING OUT OF OR IN ANY WAY RELATED TO THE USE OF OR INABILITY TO USE THE SOFTWARE, THE PROVISION OF OR FAILURE TO PROVIDE SUPPORT SERVICES, OR OTHERWISE UNDER OR IN CONNECTION WITH ANY PROVISION OF THIS AGREEMENT, EVEN IN THE EVENT OF FAULT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, BREACH OF CONTRACT OR BREACH OF WARRANTY OF CANON OR ANY SUPPLIER, OR OTHERWISE EVEN IF CANON, CANON'S SUBSIDIARIES OR AFFILIATES, THEIR DISTRIBUTORS OR DEALERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NEITHER CANON, NOR ANY OF CANON'S SUBSIDIARIES, DISTRIBUTORS OR DEALERS SHALL HAVE ANY OBLIGATION TO INDEMNIFY YOU AGAINST ANY CLAIM OR SUIT BROUGHT BY A THIRD PARTY ALLEGING THAT THE SOFTWARE OR USE THEREOF INFRINGES ANY INTELLECTUAL PROPERTY OF SUCH THIRD PARTY. TO THE FULL EXTENT PERMITTED BY APPLICABLE LAW, YOU HEREBY RELEASE CANON, ITS SUPPLIER, CANON'S SUBSIDIARIES AND AFFILIATES, THEIR DISTRIBUTORS OR DEALERS FROM ANY AND ALL LIABILITY ARISING FROM OR RELATED TO ALL CLAIMS CONCERNING THE SOFTWARE OR ITS USE. SOME STATES, PROVINCES OR LEGAL JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, OR THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR PERSONAL INJURY OR DEATH RESULTING FROM NEGLIGENCE ON THE PART OF THE SELLER, SO THE ABOVE DISCLAIMERS AND EXCLUSIONS MAY NOT APPLY TO YOU. 7. TERM This Agreement is effective upon your acceptance hereof by clicking "YES" below and remains in effect until expiration of all copyright interests in the SOFTWARE unless earlier terminated. You may terminate this Agreement by destroying the SOFTWARE including any and all copies thereof. This Agreement shall also terminate without notice to you if you fail to comply with any of the terms of this Agreement. In the event that this Agreement terminates for your failure to comply, you must promptly destroy the SOFTWARE including any and all copies thereof. In addition, Canon may enforce its other legal rights. 8. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE The SOFTWARE is a "commercial item," as that term is defined at 48 C.F.R. 2.101 (Oct 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R. 12.212 (Sept 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), all U.S. Government end users shall acquire the SOFTWARE with only those rights set forth herein. Manufacturer is Canon Inc./30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan. 9. SEVERABILITY In the event that any provision of this Agreement is declared or found to be illegal by any court or tribunal of competent jurisdiction, such provision shall be null and void with respect to the jurisdiction of that court or tribunal and all the remaining provisions of this Agreement shall remain in full force and effect. 10. CONTROLLING LAW The terms of this Agreement as it relates to purchases of the SOFTWARE in the United States of America shall be governed and construed in all respects in accordance with the laws and regulations of the State of New York, without reference to choice of law principles. The terms of this Agreement as it relates to purchases of the SOFTWARE in Canada shall be governed by the laws of the Province of Ontario. 11. ACKNOWLEDGMENT CLICKING "YES" BELOW AND SUBSEQUENTLY USING THE SOFTWARE, YOU AGREE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTOOD IT AND AGREE THAT THIS AGREEMENT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT BETWEEN YOU AND CANON CONCERNING THE SUBJECT MATTER HEREOF AND SUPERSEDES ALL PROPOSALS OR PRIOR AGREEMENTS, ORAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN YOU AND CANON RELATING TO THE SUBJECT MATTER HEREOF. NO AMENDMENT TO THIS AGREEMENT SHALL BE EFFECTIVE UNLESS SIGNED BY A DULY AUTHORIZED OFFICER OF CANON. E 3 Contents Read Carefully Before Using .......................................................................................... 2 CANON SOFTWARE LICENCE AGREEMENT ................................................................... 2 Read This First ................................................................................................................. 5 Required Accessories ..................................................................................................... 6 Requirements for Using the DV Messenger ................................................................... 6 System Requirements ..................................................................................................... 7 What Can Be Accomplished With the Software ........................................................... 8 AV/C Camera Storage Subunit-WIA Driver .................................................................... 8 DV Messenger .............................................................................................................. 8 Read Carefully ................................................................................................................. 9 Installing the Software ................................................................................................. 10 Installing from the DV NETWORK SLUTION DISK ......................................................... 10 Installing the AV/C Camera Storage Subunit-WIA Driver .............................................. 12 Uninstalling the Software ............................................................................................ 16 Uninstalling the DV Messenger ................................................................................... 16 Uninstalling the AV/C Camera Storage Subunit-WIA Driver ......................................... 16 Connecting the Camcorder to a Computer ................................................................. 22 AV/C Camera Strage Subunit-WIA Driver Downloading Still Images/Movies to a Computer ...................................................... 23 Downloading with the [Scanner and Camera Wizard] ................................................. 24 Downloading with Windows Explorer ......................................................................... 26 Uploading Files from the Computer to the Memory Card ......................................... 28 DV Messenger Preparations for the DV Messenger ............................................................................ 29 Checking the Camcorder Connection ......................................................................... 29 Disabling the Firewall .................................................................................................. 30 Videoconferencing ....................................................................................................... 33 Starting the DV Messenger ......................................................................................... 33 Preparing the Camcorder for Communication ............................................................. 34 Starting a Videoconference ......................................................................................... 37 Screen Displays .............................................................................................................. 40 DVM Panel .................................................................................................................. 40 Taskbar ....................................................................................................................... 41 DV Messenger Icon Menu ........................................................................................... 42 Operating Camcorders with DV Messenger ................................................................ 43 In [CAMERA] Mode ..................................................................................................... 44 In [VCR] Mode ............................................................................................................ 45 In [CARD] Mode (File Transfer) ..................................................................................... 47 Changing the Mode of the Camcorder ....................................................................... 49 Ending DV Messenger .................................................................................................. 50 Ending the Communication with your Contact ............................................................ 50 Ending DV Messenger ................................................................................................. 50 Troubleshooting ............................................................................................................ 51 AV/C Camera Storage Subunit-WIA Driver .................................................................. 51 DV Messenger ............................................................................................................ 51 4 Read This First Disclaimer ¡ While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. Canon reserves the right to change the specifications of the hardware and software described herein at any time without prior notice. ¡ No part of this guide may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any other language in any form, by any means, without the prior written permission of Canon. ¡ Canon makes no warranties for damages resulting from corrupted or lost data due to mistaken operation or malfunction of the camcorder, the software, memory cards (MultiMediaCards or SD Memory Cards), personal computers, or peripheral devices, or due to use of a memory card not formatted by a Canon camcorder. Trademark Acknowledgements ¡ Canon is a registered trademark of Canon Inc. ¡ Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the United Stated and/or other countries. ¡ Other names and products not mentioned above may be registered trademarks or trademarks of their respective companies. ¡ AV/C Camera Storage Subunit is a standard for downloading and uploading files using an AV device equipped with the IEEE1394. The driver complies with the "AV/C Camera Storage Subunit Version 1.0" by the IEEE1394 Trade Association. ¡ WIA stands for Windows Image Acquisition. WIA is a driver software for downloading images from digital devices onto a computer. WIA is preinstalled on Windows XP. Copyright © Canon Inc. 2002 All rights reserved. Safety Precautions Do not play the supplied CD-ROM(s) in any CD player that does not support data CD-ROM(s). Playing the CD-ROM(s) in an audio CD player (music player) could damage the speakers. It is also possible to suffer from hearing loss from listening with headphones to the loud sound of a CD-ROM played on a music CD player. ¡ In this manual, the operating modes of camcorders are described as following: ­ TAPE CAMERA mode: Mode for recording video and sound to tape. ­ TAPE PLAY (VCR) mode: Mode for playing back video and sound recorded on a tape. ­ CARD PLAY (VCR) mode: Mode for playing back images recorded on a memory card. ¡ Please note that the screens used in this manual may change. E 3 About This Manual 5 Read This First Required Accessories You need following items for using the Software: · Digital Camcorder · DV NETWORK SOLUTION DISK (Supplied) · DV (IEEE1394) Cable (Commercially available) Refer to the instruction manual of your computer for the type of the DV cable. 4-pin: 6-pin: · Speaker or Headphones (when using DV Messenger) Requirements for Using the DV Messenger To use DV Messenger, it is required that Windows XP is installed and Windows Messenger 4.5 or higher operates correctly. Make sure to confirm the following before installing the DV Messenger. 1. Windows XP and Windows Messenger 4.5 or higher are installed*. 2. Windows Messenger operates and its videoconference function can be used with a digital video camcorder.* 3. If you are using a router for Internet connection: your router is UPnP (Universal Plug and Play) compatible.** (Some modems are equipped with a router function. For details, refer to the manual of the modem.) * This software is compatible with Windows XP only. It cannot be used with other Operating Systems. Furthermore, Windows Messenger 4.5 or higher is required. Establish an environment that allows the use of this software. Please consult Microsoft for details. ** This software requires an UPnP (Universal Plug and Play) compatible router. It cannot be used with other routers. For details, consult your Internet service provider, telephone carrier or router manufacturer, or refer to the manual of the router. ¡ Be aware that your contact can access the contents of the tape or memory card in your camcorder when using DV Messenger. Caution: 6 System Requirements OS: CPU: RAM: Free Hard Disk Space: Display: Interface: Others: Microsoft Windows XP Home Edition or Professional Proper operation is not guaranteed on an OS that has been upgraded from a previous version. Pentium 500 MHz or better (800 MHz or better recommended) 128 MB or more (256 MB or more recommended) · AV/C Camera Storage Subunit-WIA Driver: 1 MB or more · DV Messenger: 100 MB or more 800 × 600 pixels/High Color (16 bit) or better IEEE1394 (OHCI compliant) Windows Messenger Version 4.5 or higher, sound function, Internet connection* * Using a standard dial-up connection is possible, but we recommend using a broadband connection to the Internet. E Cautions: ¡ Proper operation is not guaranteed on a dual CPU PC or on a user-built PC. ¡ Proper operation is not guaranteed for all computers that meet the above requirements. ¡ A CD-ROM drive is required to install the software. ¡ Connect the camcorder directly to the computer using a DV (IEEE1394) cable. ¡ The connection may not operate correctly if the camcorder is connected via a repeater or other IEEE1394 devices. ¡ Do not connect two or more camcorders to the same computer via the IEEE1394 interface. The connections may not operate correctly. ¡ Do not connect two or more IEEE1394 devices to the same computer. The connections may not operate correctly. ¡ Do not connect another IEEE1394 device while the AV/C Camera Storage Subunit-WIA Driver is operating. The connection may not operate correctly. 7 What Can Be Accomplished With the Software This topic introduces the main features of the software contained on the DV NETWORK SOLUTION DISK. AV/C Camera Storage Subunit-WIA Driver Canon camcorders only (refer to the table on the next page) The AV/C Camera Storage Subunit-WIA Driver is a software that allows you to use your camcorder as a card reader/writer by connecting camcorder and computer, both equipped with a DV (IEEE1394) terminal, with a DV (IEEE1394) cable. Downloading Files from Memory Card to Computer ( 23) Uploading Files from Computer to Memory Card ( 28) DV Messenger The DV Messenger is a software that operates with Windows Messenger preinstalled on Windows XP. You can use following operations with your digital camcorder via the Internet. Real-Time Video Communication (Videoconference) ( Sending Movies ( 33) 43) 33) You can use your camcorder and computer for real-time video and voice communication. You can send video and sound recorded with the camcorder via the Internet. Camcorder Operation ( Canon camcorders only (refer to the table on the next page) You can operate the camcorder connected to your computer and the camcorder connected to your contact's computer. (Your contact needs to have DV Messenger installed.) Transferring Files ( 47) Canon camcorders only (refer to the table on the next page) You can transfer files from a memory card in the camcorder of your contact to your computer. (Your contact needs to have DV Messenger and the AV/C Camera Storage Subunit-WIA Driver installed.) 8 * Requirements: AV/C Camera Storage Subunit-WIA Driver: Can be used with camcorders with an asterisk (*) below. Camcorder operation: Camcorders listed below can be operated from with the DV Messenger. File transfer: If your contact has a camcorder with an asterisk (*) below, you can transfer files from the memory card in the camcorder of your contact to your computer. E ELURA GL1 OPTURA Pi ZR10 ELURA2 MC ELURA2 ZR30 MC ZR25 MC ZR20 XL1S OPTURA100 MC ELURA20 MC ELURA10 ZR50 MC* ZR45 MC* ZR47 MC KR* ZR40 ELURA40 MC* GL2* OPTURA200 MC* Availability differs from area to area. Please refer to the Canon homepage for latest camcorder models. Free Download If the person you wish to communicate with does not have DV Messenger, it can be downloaded from the Canon Homepage. http://www.canondv.com/ Read Carefully ¡ If you leave the camcorder turned on for a long time, heat generation may cause damage to the camcorder. Turn off the camcorder after use. ¡ Tapes may be damaged if left in the camcorder for a long time. Do not leave tapes in the camcorder to prevent damage. 9 Installing the Software Installing from the DV NETWORK SOLUTION DISK With this procedure, the DV Messenger will be installed and the driver files for the AV/C Camera Storage Subunit-WIA Driver will be copied to your computer. For the installation procedure of the AV/C Camera Storage Subunit-WIA Driver, see p. 12. Installation Precautions: ¡ DV Messenger cannot be installed with Windows Messenger older than version 4.5. Download the latest version from the Microsoft homepage and update your Windows Messenger if necessary. Please consult Microsoft for details. ¡ Do not connect the camcorder to the computer when installing from the DV NETWORK SOLUTION DISK. ¡ Close all programs that are running before copying the driver files. ¡ Users of Windows XP Professional must first log in as an Administrator to install programs. 1. ····························································································· Set the DIGITAL VIDEO SOLUTION DISK in the computer's CDROM drive. · If the version of your Windows Messenger is older than 4.5, a dialog appears indicating that DV Messenger cannot be installed. If you wish to install only the AV/C Camera Storage Subunit-WIA Driver, close the dialog and proceed with the installation. · A dialog prompting you to choose your language appears automatically. 2. 3. ····························································································· Select your language and click [OK]. ····························································································· When the [InstallShield Wizard] appears, click [Next]. 10 4. ····························································································· Select the components and click [Next]. E 5. 6. ····························································································· Read the license agreements and click [Yes]. ····························································································· Enter your information and click [Next]. 7. ····························································································· Confirm the target folder and click [Next]. · If a dialog appears asking you whether you wish to create a shortcut of the DV Messenger on the desktop, click [Yes]. 11 Installing the Software 8. ····························································································· Click [Finish]. · The installation is complete. Installing the AV/C Camera Storage Subunit-WIA Driver Installation Precautions: ¡ Install the driver files from the DV NETWORK SOLUTION DISK first before installing the driver ( 10). ¡ Close any programs that are running before installing the driver. ¡ Do not turn off the camcorder until the driver installation is complete. And do not interrupt the installation. ¡ Users of Windows XP Professional must first log in as an Administrator to install programs. 1. 2. 3. 4. ····························································································· Start the computer. ····························································································· Connect the power adapter to the camcorder. ····························································································· Set the camcorder to CARD PLAY (VCR) mode. ····························································································· Connect the camcorder to the computer using the DV cable ( 22). · The driver installation starts automatically. · Depending on the setting of your computer, a video editing program may start. In such case, close this program. · If the installation is complete, the [Scanner and Camera Wizard] or a dialog for selecting an application appears. Click [Cancel] to close the dialog. 5. ····························································································· Restart the computer. 12 6. ····························································································· Check if the driver has been installed correctly. · From the [start] menu, select [My Computer] and check if the camera icon appears. If the camera icon does not appear, the installation has not been completed properly. Uninstall ( 16) and reinstall the driver ( 10). E Caution: ¡ Still images/movies recorded onto the memory card or downloaded to the hard disk are important original data files. Create a copy of these files first before working on them on your computer. ¡ If a memory card is inserted into the camcorder, the [Scanner and Camera Wizard] opens automatically. Proceed to step 5 "Downloading Still images/Movies to a Computer" ( 23). ¡ If no memory card inserted in the camcorder, following dialog appears. Click [OK] to close the dialog. If the Driver Has Been Installed Properly ¡ If a WIA-compliant application software is already installed, a dialog for selecting an application appears. We recommend selecting the [Scanner and Camera Wizard]. Click [OK], and the [Scanner and Camera Wizard] starts. Proceed to step 5 of "Downloading Still Images/Movies to a Computer" ( 23). If you wish to start [Scanner and Camera Wizard] automatically each time you connect the camcorder to the computer, put a check mark next to [Always use this program for this action]. 13 Installing the Software Setting the Application Not to Start Automatically When you install the driver, the computer is set to automatically start an application each time you connect the camcorder to the computer. Use the following procedures to change the setting. 1. 2. 3. 4. 5. ····························································································· Connect the power adapter to the camcorder. ····························································································· Set the camcorder to CARD PLAY (VCR) mode. ····························································································· Connect the camcorder to the computer using the DV cable ( 22). ····························································································· From the [start] menu, select [My Computer]. ····························································································· Right-click the mouse button on the camera icon and select [Properties]. 6. 7. ····························································································· Click the [Events] tab. ····························································································· Select [Take no action] and click [OK]. · Now the application will not start automatically when you connect the camcorder to the computer. 14 ¡ To start a WIA-compliant application automatically, select [Start this program] and click [OK]. Notes: E ¡ If the started application displays a message such as [TWAIN data source not found. Reinstall the scanner software.], select [WIA-Canon Camera Storage] and use the WIA-TWAIN Driver. 15 Uninstalling the Software Uninstall the software if it has not been installed correctly or if it is not required anymore. Caution: ¡ Close all programs that are running before uninstalling. Uninstalling the DV Messenger 1. ····························································································· From the [start] menu, select [All Programs], [Canon Utilities], [DV Messenger] and [DV Messenger Uninstall] in succession. 2. ····························································································· If a confirmation dialog appears, click [Yes]. · The uninstall utility starts and removes DV Messenger. Uninstalling the AV/C Camera Storage Subunit-WIA Driver 1. 2. 3. 16 ····························································································· Connect the power adapter to the camcorder. ····························································································· Set the camcorder to CARD PLAY (VCR) mode. ····························································································· Connect the camcorder to the computer using the DV cable ( 22). · If [Scanner and Camera Wizard] or Explorer are open, close them. 4. ····························································································· From the [start] menu, select [Control panel]. E 5. ····························································································· Click [Printers and Other Hardware]. 6. ····························································································· Click [Scanners and Cameras]. 17 Uninstalling the Software 7. ····························································································· Right-click the mouse button on the camera icon and select [Delete]. · When the camera icon does not appear, refer to "Troubleshooting the Driver Uninstall" below. 8. ····························································································· In the confirmation dialog, click [Yes]. · [#(number)] may appear after [Canon Camera Storage Device]. This does not affect the uninstall process. · The uninstall process is complete. Troubleshooting the Driver Uninstall If you had problems uninstalling the driver, use the following procedures to remove it. Notes: Use the procedures below for the following circumstances too. ¡ If you do not find the [Scanners and Cameras] icon in the [Printers and Other Hardware]. ¡ If the Camera icon does not appear in the [Scanners and Cameras] folder. 1. 2. ····························································································· From the [start] menu, select [Control panel]. ····························································································· Click [Performance and Maintenance]. 18 3. ····························································································· Click [System]. E 4. 5. ····························································································· Click the [Hardware] tab on the [System Properties]. ····························································································· Click the [Device Manager] button. 6. ····························································································· If [Canon Camera Storage Device] appears under [Imaging devices] and/or [Other devices] categories, use the following procedures to delete it. 1. Right-click the mouse button on [Canon Camera Storage Device] and select [Uninstall]. 19 Uninstalling the Software 2. In the confirmation dialog, click [OK] and close [System Properties] and [Device Manager]. · Remove all copies of the [Canon Camera Storage Device] icon that appear in the [Other devices] or [Imaging devices] categories, or that appear more than once in one category. 7. ····························································································· From the [start] menu, select [My Computer] and double-click the [C:], [WINDOWS] and [INF] folders in succession. If the [INF] Folder Is Not Visible in the [WINDOWS] Folder Use the following procedures to show all files and folders. 1. Click the [Tools] menu and select [Folder Options]. 2. Click the [View] tab. 3. In the [Advanced setting] section, set the [Hidden files and folders] category to the [Show hidden files and folders] options. · If [Hide extensions for known file types] is selected, remove its check mark. 20 8. ····························································································· Double-click the [Oem*.inf] file. · A number such as "0" or "1" appears in place of the asterisk (*) above. You will also find another file called [Oem*.pnf], which will have the same number as the [Oem*] file. The two constitute one set. There may be many file sets starting with "Oem". E · The Windows Notepad program will start and show the file contents. Click each [Oem*] file until you find the one that contains "; AV/C Camera Strage WIA driver" in its first line. When you have found the correct file, delete the file set. 1. Close the Notepad window. 2. Right-click the mouse button and select [Delete]. 9. ····························································································· Close all windows and restart the computer. · The uninstall process is complete. Caution: ¡ The [Inf] folder contains numerous files that are critical to the computer's operation. Be extremely careful not to delete the wrong files. If you delete the wrong file, you may be unable to restart Windows. 21 Connecting the Camcorder to a Computer Connection Precautions: ¡ Make sure the camcorder is being powered by the compact power adapter before connecting it to a computer. ¡ Do not connect any devices to the camcorder`s USB terminal when connecting the camcorder to the computer using the DV terminal. ¡ If the AV/C Camera Storage Subunit-WIA Driver is installed on the computer and you connect your camcorder to the computer using a DV cable and set it to CARD PLAY (VCR) mode, [Canon Camera Storage Device] (camera icon) or [Canon DV Camcorder] (camcorder icon) appears in the explorer view. If the driver is not installed, only the [camcorder] icon appears. Camera icon: You can download still images/movies from a memory card to the computer. Camcorder icon: You can playback still images/movies recorded on a tape on the computer. 1. ····························································································· Attach the DV cable to the computer's IEEE1394 terminal and the camcorder's DV terminal. · You do not need to turn off the computer for this procedure. · Refer to your computer manual for the location of the computer's IEEE1394 terminal. · See your camcorder's instruction manual for connecting instructions. DV Terminal on the Camcorder DV (IEEE1394) cable IEEE1394 Terminal on the Computer Camcorder End Computer End 4-pin: 6-pin: 22 Downloading Still Images/Movies to a Computer Cautions: ¡ Observe following precautions when the camcorder's card access indicator is flashing (the camcorder is reading or writing from or to the memory card). Failure to do so may cause memory card data to become corrupted. ­ Do not remove the memory card or detach the DV cable. ­ Do not turn off the camcorder or the computer. ­ Do not change the position of the POWER switch or the TAPE/CARD switch. ¡ Format the memory card with the camcorder. ¡ If numerous still images/movies are contained in the memory card, it may take a while until the [Scanner and Camera Wizard] opens. ¡If still images not recorded with Canon digital camcorders are contained in the memory card, their thumbnails (small images) may not be displayed correctly in the [Scanner and Camera Wizard]. ¡ If you select [Canon Camera Storage Device] in the explorer view, folder contents may not be displayed correctly. In this case, right-click the mouse button on the folder and select [Refresh]. ¡ Still images cannot be uploaded to the memory card using the [Scanner and Camera Wizard]. ¡ Do not rotate the still images recorded on a memory card in [Windows Picture and Fax Viewer] or [Scanner and Camera Wizard] or in Windows Explorer. The file format of the original image will be changed, and the recording information of the still image may be lost. The still image can no longer be displayed in the camcorder. ¡ Still images/movies written to the memory card or downloaded to the hard disk are important original data files. Create a copy of the file first before working on it on your computer. ¡ If the following message appears, check if the memory card is correctly inserted into the camcorder. If so, disconnect the camcorder from the computer and reconnect it. E Downloading with the [Scanner and Camera Wizard] You can download still images/movies from the memory card to the computer using the [Scanner and Camera Wizard] (only images recorded to the memory card with your Canon camcorder). 1. 2. 3. ····························································································· Insert a memory card to the camcorder. · Make sure to close the memory card cover after inserting a memory card. ····························································································· Connect the power adapter to the camcorder. ····························································································· Set the camcorder to CARD PLAY (VCR) mode. 23 AV/C Camera Storage Subunit-WIA Driver Downloading Still Images/Movies to a Computer 4. ····························································································· Connect the camcorder to the computer using the DV cable ( 22). · The [Scanner and Camera Wizard] starts automatically. · If the program does not start automatically, select [My computer] on the [start] menu, right-click the mouse button in the camera icon and click [Get pictures]. 5. ····························································································· Click [Next]. · Thumbnail versions of the camcorder file appear. 6. ····························································································· Confirm that a check mark is on the still image/movie you wish to download and click the [Next] button. 24 7. ····························································································· Specify file name and destination and click the [Next] button. · Downloading of the selected still images starts. · When download is complete, a dialog confirming to finish appears. E 9. ····························································································· Click [Finish]. · You can also check the still images you have copied by clicking on the link to the destination folder. 25 AV/C Camera Storage Subunit-WIA Driver 8. ····························································································· If you wish to end the program, select [Nothing. I'm finished working with these pictures] and click [Next]. Downloading Still Images/Movies to a Computer Downloading with Windows Explorer With Windows Explorer, still images/movies can be downloaded from memory card to computer. 1. 2. 3. ····························································································· From the [start] menu, select [My Computer]. ····························································································· Double-click the camera icon. ····························································································· Double-click the [DCIM] folder. 4. ····························································································· Double-click the [***CANON] folder. · A number appears in place of the asterisk (*). · The still images/movies recorded on the memory card will be displayed. · If you select [Thumbnails] on the [View] menu, thumbnail versions of the still images/movies appear. With images not recorded with Canon digital camcorders, their thumbnails may not be displayed correctly. · Double-clicking a still image on Windows Explorer displays it in bigger size. · Double-clicking a file other than a still image downloads the file to the [My Pictures] folder. 26 5. ····························································································· Keep the mouse clicked on the thumbnail and move it to the desired folder (drag and drop). E 5. ····························································································· Right-click the mouse on the image and select [Copy]. 6. ····························································································· Open a folder, right-click the mouse in the folder and select [Paste]. 27 AV/C Camera Storage Subunit-WIA Driver OR Uploading Files from the Computer to the Memory Card Cautions: ¡ If you are using an SD Memory Card, make sure the protect switch is set to allow recording. ¡ When uploading files to the memory card, keep the file name within 8 characters. Depending on the extension (4 characters or more), files may not be uploaded. ¡ Files cannot be uploaded to the memory card by dragging and dropping them into a folder in the memory card. ¡ Files may not be uploaded to the memory card depending on file type and size. ¡ Still image/movies uploaded to the memory card may not be played back on the camcorder depending on file type and size. ¡ If you download a still image/movie from the camcorder to the computer and upload it again to the camcorder: ­ The still image/movies may not be played back on the camcorder. ­ The DPOF setting before downloading is cancelled. 1. ····························································································· Right-click the mouse button on the file you wish to add and select [Copy]. 2. ····························································································· On the explorer view, open a folder within the memory card, right-click the mouse button in the folder and select [Paste into this folder]. · Uploading of the still image starts. · If the file name already exists in the selected folder, the file cannot be uploaded to the memory card. · If [Paste into this folder] does not appear in the menu, the memory card may be write-protected. 28 Preparations for the DV Messenger Before you use the DV Messenger, check whether the camcorder is correctly connected to the computer. You also need to disable the firewall ( 30). E Connecting Precautions: ¡ Make sure the camcorder is being powered using the power adapter before connecting it to a computer. ¡ If you are connecting the camcorder to the computer using the DV cable, do not connect any other devices to the camcorder's USB terminal. ¡ Do not connect two or more camcorders to the same computer. The DV Messenger may not operate correctly. Checking the Camcorder Connection 1. 2. 3. 4. 5. ····························································································· Connect the power adapter to the camcorder. ····························································································· Set the camcorder to TAPE CAMERA mode. ····························································································· Connect the camcorder to the computer using the DV cable ( 22). ····························································································· From the [start] menu, select [All Programs] and [Windows Messenger]. · [Windows Messenger] appears. · If the [.NET Passport Wizard] appears, click [Cancel]. ····························································································· From the [Tools] menu, select [Audio Tuning Wizard]. DV Messenger 29 Preparations for the DV Messenger 6. ····························································································· Click [Next]. 7. ····························································································· Confirm that your camcorder is displayed and click [Cancel]. · If you are using a Canon camcorder, check if [Canon DV Device] is displayed. · If [Canon DV Device] does not appear, click to display the device list and check if [Canon DV Device] is listed. · If [Canon DV Device] is not listed, perform [Windows Messenger Audio Update]. Please consult Microsoft for details. Disabling the Firewall About the Firewall The firewall is an important security system that protects your computer by limiting or preventing access by other computers on the Internet. If you disable the function, other computers may be able to access the files on your computer, or write files onto your hard disk. Disable the firewall before using the DV Messenger, and enable the firewall after use. Caution: ¡ If an anti-virus software is installed on your computer, the firewall of the software may be active. In such case, you need to deactivate its firewall function. For further details, refer to the instruction manual of the respective software. 30 1. ····························································································· From the [start] menu, select [Control Panel]. E 2. ····························································································· Click [Network and Internet Connections]. 3. ····························································································· Click [Network Connections]. 31 DV Messenger Preparations for the DV Messenger 4. ····························································································· Select the network you are using, right-click the mouse button and select [Properties]. · You can identify the network you are using by checking which [Status] is [Enabled]. · If [1394 Connection] is listed, select a connection other than [1394 Connection]. If [Status] is not shown, select [Details] from the [View] menu. 5. Click the [Advanced] tab, remove the checkmark from the [Internet Connection Firewall] section and click [OK]. ····························································································· Note: ¡To enable the firewall after using DV Messenger, repeat steps 1 to 4 and place the checkmark back to the checkbox. 32 Videoconferencing Starting the DV Messenger Caution: ¡ The DV Messenger will not start when you have signed in to Windows Messenger. In such case, sign out of Windows first and start DV Messenger. ¡ Do not update Windows Messenger while DV Messenger is started. ¡ Do not connect two or more digital camcorders to the computer. E 1 . Set the camcorder to TAPE CAMERA mode. 2. Connect to the Internet. 3. Double-click the [DV Messenger] icon on the desktop, or select [DV Messenger] from the [start] menu. ····························································································· ····························································································· ····························································································· · If a dialog appears prompting you to sign out of Windows Messenger, click [OK]. The computer signs out of Windows Messenger and starts DV Messenger. · DV Messenger starts. The DVM panel (DV Messenger panel) and Windows Messenger sign-in window appears. 4. ····························································································· In the Windows Messenger window, click [Click here to sign in]. DVM Panel Windows Messenger 33 DV Messenger Videoconferencing · To use the DV Messenger, both you and your contact need to be online. ­ If your contact is already online when you sign in: A message will be send automatically to your contact notifying that you have signed in. Message on the Computer Screen of Your Contact ­ If your contact signs in when you are already online: A message appears automatically notifying you that your contact has signed in. Message on Your Computer Screen Preparing the Camcorder for Communication When you have signed in, set the camcorder and adjust the volume of the speaker and microphone. 1. 2. ····························································································· Set the camcorder to TAPE CAMERA mode or TAPE PLAY (VCR) mode. · When you have set the camcorder to TAPE PLAY (VCR) mode, play back the tape. ····························································································· Open the [Tools] menu and select [Audio Tuning Wizard]. 34 3. ····························································································· Click [Next]. E 4. ····························································································· Select your camcorder and click [Next]. · If you are using a Canon camcorder, select [Canon DV Device]. 5. ····························································································· When the video picture appears, click [Next]. · The live video recording of the camcorder appears in TAPE CAMERA mode. In TAPE PLAY (VCR) mode, the playback video appears. DV Messenger 35 Videoconferencing 6. ····························································································· Read the explanation for speaker and microphone settings and click [Next]. 7. ····························································································· Set [Microphone] and click [Next]. · If you are using a Canon camcorder, select [Canon DV Device]. · The installed sound device appears for [Speaker]. Proceed with the setting unchanged.