User manual CANON PIXMA MP140

Easy Setup Instructions Start Here Photo All-in-One Unpack the Machine · Pleaseconfirmtheincludeditemsagainsttheillustrationprintedonthelidofthepackingbox. · A USB cable is necessary to connect the machine with your computer. 1 Prepare the Machine Note When moving the machine, carry the machine at both ends as shown below. Do not lift the machine by grasping the Paper Support Extension or the Operation Panel. 2 Install the FINE Cartridges d Plug the Power Cord in the back of the machine and connect the other end to the wall outlet. a Remove the Black FINE Cartridge from its box. d Push up the FINE Cartridge until it clicks into place. Important For correct machine operation, make sure the FINE Cartridge is secure in slots. Power Cord aPlacethemachineonaflatandhorizontalsurface,anddonot place any objects in front of the machine. Note Do not connect the USB cable at this stage. e Press the ON/OFF button to turn on the machine. The machine willinitialize.WaituntilthePOWERlampstopsflashingand remains lit green. b Remove the Protective Tape gently. Protective Tape e Repeat the procedure for the Color FINE Cartridge, inserting it into the right slot C . C Electrical Contacts b the Scanning Unit (Printer Cover), then remove the Lift Protective Material on the right side. f the Scanning Unit (Printer Cover) and pull the Scanning Lift Unit Support down into place. The FINE Cartridge Holder automatically moves to the left. PrintHeadNozzles The FINE Cartridge Holder moves to the left. Install the FINE Cartridges here. Important · Do not touch the Electrical Contacts or Print Head Nozzles on a FINE Cartridge. The machine may not print out properly if you touch it. · Do not reattach the Protective Tape once you have removed it. · Be careful not to stain your hands or surrounding work area with ink on the removed Protective Tape. f Lift the Scanning Unit (Printer Cover) to put the Scanning Unit Support back to its original position, then close the Scanning Unit (Printer Cover). c Insert the Black FINE Cartridge slightly slanted into the left slot B. B Protective Material g Write down the Serial Number located inside the machine. You will need this to register your product. Caution Before turning on the machine, remove all of the shipping tapes. c Close the Scanning Unit (Printer Cover). Important Once you have installed the FINE Cartridges, the LED will flash green. Wait for about one to two minutes, until the LED stops flashing and displays 1 and the machine has stopped making operating noises, before proceeding. Hardware setup is complete. Serial Number Windows® MP Drivers Installation w s Macintosh® MP Drivers Installation to M ac in sh W in do Note · The screens below refer to Windows XP Service Pack 2 installation. Screens may vary depending on the operating system you are using. · For Windows XP or Windows 2000, log on to Windows as a member of the Administrators group before continuing. · Before installing the driver, disable all anti-virus programs and automatically loading programs. Important Since Mac® OS 9, Mac OS X Classic environments, or Mac OS X v.10.2.7 or earlier are not supported, do not connect the machine to these. Note · Use Mac OS X v.10.2.8 to 10.4.x. · The screens below refer to Mac OS X v.10.4.x installation. Screens may vary depending on the operating system you are using. · Log on as an Administrator before continuing. · Before installing the driver, disable all anti-virus programs and automatically loading programs. h When the User Registration screen appears, click Register. a Be sure to TURN THE MACHINE OFF before continuing. (1) Press the ON/OFF button. (2) Make sure that the POWERlampstopsflashing. b Turn the computer on and start Windows. Important If you see the Found New Hardware Wizard, remove the USB cable. Click Cancel to quit the screen. Next, turn off the machine. Then proceed from step c to install the MP Drivers. a Connect one end of the USB cable to the computer, the other to the machine. Note Follow on-screen instructions to register your product. You will need your product serial number, which is located on the inside of the machine. See Step 1- g on the front page. i When the Installation completed successfully screen h When the Print Head Alignment Recommended screen appears, click Next. appears, click Restart. The system is restarted automatically. c Insert the Setup CD-ROM. The setup program should run automatically. Note The setup program should run automatically. If the installer in the CD-ROM does not run automatically, click Start and select My Computer, then double-click the CD-ROM icon . i When the User Registration screen appears, click Register. b Turn on your Mac and your machine and insert the Setup CDROM. Note If the CD-ROM folder does not open automatically, double-click the CD-ROM icon on the desktop. When using Mac OS X v.10.2.8 to v.10.3.3: Restarting the computer while connected to the machine may cause the machine not to be detected. To resolve this, either unplug the USB cable then plug it back in again, or turn the machine off then back on again. j After restarting the computer, start Printer Setup Utility d When the main menu appears, click Easy Install. c Double-click the Setup icon. d When the Authenticate screen appears, enter your Note · Follow on-screen instructions to register your product. You will need your product serial number, which is located on the inside of the machine. See Step 1- g on the front page. · We would appreciate it if you would take part in the PIXMA Extended Survey Program regarding the use of Canon machine. For details, refer to the on-screen instructions. (start Print Center if you are using Mac OS X v.10.2.8) and then check that the printer name you want to use is shown in Printer List. If the printer name is not displayed, click Add to add the machine. For more detailed instructions, refer to the Mac on-screen Help. Note If the straight line is misaligned or print quality is not satisfactory after installing the MP Drivers, you may need to align the Print Head. Refer to "Aligning the Print Head" in the Quick Start Guide. administrator name and password. Click OK. If you do not know your administrator name or password, click , then follow the on-screen instructions. e When the main menu appears, click Easy Install. Software installation is now complete. Note · Select Easy Install in order to install the MP Drivers, on-screen manuals, and application software. Select Custom Install in order to choose the options you would like to install. · To install Adobe® RGB (1998), click Custom Install and follow the on-screen instructions. j When the Installation completed successfully screen appears, click Exit. If Restart is displayed, make sure that the Restart the system now (recommended) check box is selected, then click Restart. Note If the straight line is misaligned or print quality is not satisfactory after installing the MP Drivers, you may need to align the Print Head. Refer to "Aligning the Print Head" in the Quick Start Guide. Note Select Easy Install in order to install the MP Drivers, on-screen manuals, and application software. Select Custom Install in order to choose the options you would like to install. eWhenthelistofapplicationstoinstallappears,confirmthe contents, click Install. Note Move the cursor over items to display explanations of each application. Register your Canon PIXMA today, and you will be entitled to the following benefits: Canon Sweepstakes!!! Register your PIXMA product and you will be automatically enteredtowingreatCanonprizes! Visit http://www.usa.canon.com/sweepstakes01 for details. Receive information on new products, tips and promotions Receive our monthly Printer Newsletter with Canon savings, fun Creative Park projects, and helpful tips. Receive software upgrades Canon USA often updates the software for its printers. You will be among thefirsttoreceivenotifications. Protect your product We will keep the model number and date of purchase of your new Canon PIXMAprinteronfiletohelpyourefertothisinformationandexpedite your call in the event of an insurance claim such as loss or theft. f Read the License Agreement carefully and click Yes. Follow the on-screen instructions to install the software. If a message askingforyourconfirmationtorestartyourcomputerappears, click OK. one end of the USB cable to the computer, the other to the machine, then TURN THE MACHINE ON. The software will begin identifying the printer port being used. Important If you cannot go to the next procedure after two minutes, refer to "Troubleshooting" instructions in the User's Guide on-screen manual. Software installation is now complete. fWhenthelistofapplicationstoinstallappears,confirmthe contents, then click Install. Note Move the cursor over items to display explanations of each application. g When the Printer Connection screen appears, connect g Read the License Agreement carefully and click Yes. Follow the on-screen instructions to install the software. Part no. QT5-0973-V01 © 2007 Canon Inc. "Windows" is a trademark of Microsoft Corporation, registered in the United States and other countries. Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. "Macintosh" and "Mac" are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. "Adobe" and "AdobeRGB(1998)"areeitherregisteredtrademarksortrademarksofAdobeSystemsIncorporatedintheUnitedStatesand/orothercountries.Allotherproductandbrandnamesaretrademarksoftheirrespectiveowners.Specificationssubjecttochangewithoutnotice. XXXXXXXX PRINTEDINVIETNAM