scala-700 TM QUICK GUIDE INTRODUCTION This quick guide will assist you with the use of the scala700 headset. For more detailed information please download the User Manual from our website at www.cardowireless.com. Before using the scala-700 we recommend that you familiarize yourself with the Bluetooth® functionality of your cellular phone. See the User Manual for safety information. IMPORTANT: Please visit www.cardowireless.com/FAQ.php to check whether your particular cellular phone has any Bluetooth related bugs that may affect its operability with your headset. COMPONENTS Wheel USB Charging Jack Speaker Control Button Ear Loop Status Light scala-700 TM BEFORE USING 1. Make sure that the headset is fully charged for at least four hours before initial use. 2. To charge the headset, plug the charger into the headset's Charging Jack, which is located just below the Wheel. 3. While charging, the red Status Light illuminates. When charging is completed the light will turn off. NOTE: Plugging in the charger turns off the headset. You must turn on the headset after charging. When plugging the headset into the charger, it may take up to 15 seconds before the red Status Light turns on. GENERAL INSTRUCTIONS All headset functions are controlled either by: · Pressing the Control Button either for a short period of less than a second, or a long period of over three seconds, Or · Moving the Wheel up or down, or by pressing it inwards. 2 scala-700 TM TURNING THE HEADSET ON FOR THE FIRST TIME In order for your headset to work with your cellular phone, they must first recognize each other. This process is called "pairing", and only needs to be performed once for each phone. 1. To initiate pairing, press the Wheel for at least 8 seconds while the headset is turned off. The Status Light will flash red and blue indicating that the headset is in pairing mode. 2. Turn on your phone and make sure that its Bluetooth function is activated. 3. Search for Bluetooth devices on your phone by following the phone's instructions. 4. After a few seconds the phone will list the scala-700 as a "discovered device". Select it and follow your phone's instructions to accept the pairing. 5. When prompted, enter 0000 (four zeros) as your PIN or passkey. 6. Your phone will confirm that pairing has succeeded. Note: If pairing is not completed within two minutes the headset will return to standby mode. 3 scala-700 TM You can enter pairing mode at any time by pressing the Wheel for at least 8 seconds while the headset is turned off Your Headset can pair with up to eight phones, and will automatically connect to the last phone connected to the Headset. To connect to a different phone go to the Bluetooth menu of the active mobile phone and disconnect the Headset. Now go to the Bluetooth menu of the desired phone and connect the Headset to this phone. ATTACHING THE HEADSET TO YOUR EAR Attach the Headset to your ear using the Ear-Loop. Insert the pin of the Ear-Loop to a suitable depth so that the speaker fits snugly into your ear (hovering above your ear canal), then bend the flexible bow of the Ear-Loop to produce a snug but comfortable fit. SWAP BETWEEN TWO ACTIVE MOBILE PHONES The scala-700 allows you to swap, i.e. to alternately use one among the last two phones to which it has been connected. While both phones are turned on and the headset is on standby, doublepress the wheel. Now the Headset will switch to the second phone. Each time you double-press the wheel, the alternate phone connects to the Headset. 4 scala-700 TM FUNCTIONS DESIRED RESULT: Turn on the headset Turn off the headset Answer a call REQUIRED ACTION: Press the Wheel steadily for at least 3 seconds Press the Wheel steadily for at least 3 seconds Short press the Control Button NOTE: Wait until you hear the incoming call on the headset (not only on the phone) before pressing the Control Button Long press the Control Button Short press the Control Button Move the Wheel up by steps. When you hear a beep, it is at maximum. Move the Wheel down by steps. When you hear a beep it is at minimum. During a call, short press the Wheel inwards During a call, long press the Control Button During standby, short press the Control button and state the name of the person you wish to call (after a tone is heard). Note that your mobile phone must support the voice dial feature. Short press the Wheel During an active call and one call on hold or waiting, short press the Wheel. During an active call and one call on hold, long press the Wheel Reject an incoming call Terminate a call Increase the volume Decrease the volume Mute/Un-mute Transfer a call to the phone Voice Dial Redial Accept call waiting or swap between calls Conference call 5 scala-700 TM FUNCTIONS (continued) DESIRED RESULT: Locate the headset (Buzzer Function) REQUIRED ACTION: Activate the Buzzer as follows: Dial a call with the mobile phone and press Send/Talk. While the call is in progress, begin pressing the mobile phone volume buttons up, then down repeating the up/down sequence four or more times. The headset will start buzzing. In standby, simultaneously press the Wheel and the Control button for at least 3 seconds. Lock/Unlock buttons BATTERY MONITOR To check the status of the headset's battery, press the Control Button for at least 7 seconds while the headset is on Standby position. The Status Light will flash for 2 seconds as follows: · Blue · Red and Blue · Red Fully charged Medium charge Weak charge DISABLING / ENABLING THE STATUS LIGHT To disable/enable the Status Light, while the Headset is on Standby, move the Wheel down and hold for at least three seconds. The Status Light will stop/begin flashing, depending on whether you are disabling/enabling the Status Light. 6 scala-700 TM CHANGING THE WHEEL ORIENTATION When changing volume, the default configuration of the headset is for it to be worn on the right ear. This means that clicking up on the Wheel towards the small `+' sign on the headset increases the volume one step at a time, while clicking down towards the `-' sign on the headset decreases the volume one step at a time. If you wear the headset on your left ear, this headset allows you to change the Wheel orientation from right to left ear, so that pressing the Wheel up still increases the volume, and pressing down decreases the volume. In order to set the headset for left ear orientation: Power on the Headset by pressing and holding the Control button while pressing in and holding the Wheel for 4 seconds. Once you see 3 blue flashes, the headset is powered on and you may release the buttons. NOTE: The headset will revert to its default right ear configuration once it is turned off. In order to regularly use the headset in left ear configuration, always turn on the headset using the Control + Wheel procedure above. NOTE: If you choose to wear the headset on your left ear but do not with to change the Wheel orientation, the Wheel will function in the reverse order, i.e. turning down will increase volume, turning up will decrease volume. 7 scala-700 TM LOCATE THE HEADSET (Buzzer Function) The scala-700 allows you to locate the headset by activating a buzzer. Activate the Buzzer as follows: Dial a call with the mobile phone and press Send/Talk. While the call is in progress, begin pressing the mobile phone volume buttons up, then down, repeating the up/down sequence four or more times. The headset will start buzzing. STATUS LIGHTS The Headset uses the following Status Lights to display its status Status Light Status None 3 blue flashes 3 red flashes Alternating Red/blue flashes 1 blue flash every 3 seconds 2 blue flashes every 3 seconds 1 red flash every 3 seconds 2 red flashes every 3 seconds Steady red Headset is off or Status Light is disabled Powered on successfully Powered off successfully Pairing mode Standby ­ No call in progress Call being initiated or in progress Standby and battery is low Call being initiated or in progress and battery is low Headset is being charged 8 scala-700 TM AUDIO TONES With the exception of the actions described in the following table, all actions are followed by a single tone to confirm that the headset has accepted the action. Action Mute Volume up Volume down Locate the headset Tone On/off tone and mute reminder tone every 20 seconds Tone on maximum volume Tone on minimum volume Buzzing TROUBLESHOOTING Note: For most problems, it is recommended as a first step that you turn the headset off for 20 seconds and then on again. If this does not help, try pairing the headset and phone again. Problem Action Pairing fails 1. Delete scala-700 from your paired device list in your phone (if it is listed). 2. Turn off the mobile phone and headset. 3. Take the battery out of the phone and put it back. 4. Repeat the pairing process as described in TURNING THE HEADSET ON FOR THE FIRST TIME section above. 9 scala-700 TM Can't answer phone calls or (Assuming your mobile phone supports perform voice dialing Voice Dialing) : 1. Make sure your headset is turned ON and in standby mode while the blue light indicator flashes slowly. 2. Verify that the Bluetooth function on your phone is set to ON. 3. Verify that the scala-700 is the correctly paired headset to your mobile phone (refer to the phone manual). 4. Link the headset to the phone as described above. 5. Check "Definitions" or "Settings" on your mobile phone. 6. Perform the pairing process and check again. Battery does not provide at least six hours of talk time. Make sure your headset is fully charged. Charging time is up to 3 hours for an empty battery. When fully charged and charger is connected to headset, the red light indicator turns off. 10 scala-700 TM NOTE: You may have compromised the battery's capacity if you did not fully charge it prior to initial use. Red Status Light does not light steady when charger is connected. 1. Make sure the Charging Jack is firmly plugged in. 2. Disconnect the Charging Jack, wait a few seconds and plug it back in. 3. When the headset is fully charged, the red light turns off. 1. Possibly caused by nearby interference 2. If you have a GSM phone and your headset is too close to the phone, interference may occur. 3. Headset and mobile phone are more than 30 ft. (10m) apart or there are major obstacles such as concrete walls between the Headset and mobile phone (e.g. concrete walls or similar). Your headset is probably in key lock mode. Unlock the headset as described in the guide above. 11 Bad sound quality I press the buttons and nothing happens SUPPORT We strongly suggest that you download from our website the most updated version of the comprehensive User Manual. For additional information visit our website at www.cardowireless.com, or call us at: Toll-free USA: 1-800 488-0363 Europe: +49 89 450-36819 Developed and Manufactured by: QG700_005_0466 www.cardowireless.com