User manual CASIO EX-Z40

E Digital Camera EX-Z30/EX-Z40 User's Guide Thank you for purchasing this CASIO Product. · Before using it, be sure to read the precautions contained in this User's Guide. · Keep the User's Guide in a safe place for future reference. · For the most up-to-date information about this product, visit the official Exilim Website at http://www.exilim.com/. All example procedures in this User's Guide are based on the EX-Z40. The same procedures also apply to the EX-Z30, unless specifically noted otherwise. C K871PCM1DMX-2 INTRODUCTION INTRODUCTION Unpacking Check to make sure that all of the items shown below are included with your camera. If something is missing, contact your dealer as soon as possible. Camera Rechargeable lithium ion battery (NP-40) USB Cradle (CA-24) Strap CD-ROM USB Cable Basic Reference · Note that the shape of the AC adaptor depends on the area where you purchased the camera. * The shape of the AC power cord plug varies according to country or geographic area. Special AC Adaptor (Inlet Type) AC power cord * Special AC Adaptor (Plug-in Type) 2 INTRODUCTION Contents 2 INTRODUCTION Unpacking .................................................................... 2 Features ....................................................................... 9 Precautions ................................................................. 11 General Precautions Test for proper operation before using the camera! Data Error Precautions Operating conditions Condensation Lens Other 11 13 13 13 14 14 14 19 GETTING READY About This Manual ..................................................... 19 General Guide ............................................................ 20 Camera USB Cradle REC mode PLAY mode Changing the Contents of the Monitor Screen 20 21 22 24 25 Monitor Screen Contents ........................................... 22 Indicator Lamps .......................................................... 25 Attaching the Strap .................................................... 26 Power Requirements ................................................. 26 To load the battery To remove the battery To charge the battery Power Supply Precautions Turning the Camera On and Off Configuring Power Saving Settings 26 28 28 33 37 38 15 QUICK START GUIDE First, charge the battery! ............................................ 15 To configure display language and clock settings ..... 16 To record an image .................................................... 17 To view a recorded image .......................................... 17 To delete an image ..................................................... 18 Using the On-screen Menus ...................................... 39 Configuring Display Language and Clock Settings ... 42 To configure display language and clock settings 43 3 INTRODUCTION 45 BASIC IMAGE RECORDING Aiming the Camera Recording an Image Recording Precautions About Auto Focus About the REC Mode Monitor Screen 45 46 48 49 49 Exposure Compensation (EV Shift) ........................... 67 Adjusting White Balance ............................................ 69 Adjusting White Balance Manually Creating Your Own BESTSHOT Setup 70 73 Recording an Image ................................................... 45 Using the BESTSHOT Mode ..................................... 71 Combining Shots of Two People into a Single Image (Coupling Shot) ................................. 75 Recording a Subject onto an Existing Background Image (Pre-shot) .................................... 77 Using the Movie Mode ............................................... 79 Recording Audio ......................................................... 81 Adding Audio to a Snapshot Recording Your Voice 81 83 Using the Optical Viewfinder ...................................... 50 Using Zoom ................................................................ 51 Optical Zoom Digital Zoom Flash Unit Status Flash Precautions 51 52 55 55 Using the Flash .......................................................... 53 Using the Self-timer ................................................... 56 Specifying Image Size and Quality ............................ 58 To specify the image size To specify image quality 58 60 Using the Histogram .................................................. 84 REC Mode Camera Settings ..................................... 86 Specifying ISO Sensitivity Turning the On-screen Grid On and Off Turning Image Review On and Off Assigning Functions to the [ ] and [ ] Keys Specifying Power On Default Settings Resetting the Camera 86 88 88 89 90 91 61 OTHER RECORDING FUNCTIONS Using Auto Focus Using the Macro Mode Using the Pan Focus Mode Using the Infinity Mode Using Manual Focus Using Focus Lock 62 64 64 65 65 66 Selecting the Focus Mode ......................................... 61 4 INTRODUCTION 92 PLAYBACK Playing an Audio Snapshot 93 112 DELETING FILES Basic Playback Operation .......................................... 92 Flipping the Display .................................................... 94 Zooming the Display Image ....................................... 95 Resizing an Image ..................................................... 96 Cropping an Image ..................................................... 97 Playing a Movie .......................................................... 99 Displaying the 9-image View ................................... 100 Selecting a Specific Image in the 9-image View 101 Deleting a Single File ................................................ 112 Deleting All Files ....................................................... 113 114 FILE MANAGEMENT Memory Folders and Files To protect a single file To protect all files in memory To To To To copy a file to the FAVORITE folder display a file in the FAVORITE folder delete a file from the FAVORITE folder delete all files from the FAVORITE folder 114 115 116 116 118 119 120 Folders ...................................................................... 114 Protecting Files ......................................................... 115 Displaying the Calendar Screen .............................. 101 Playing a Slide Show ............................................... 102 To specify the slideshow images To specify the slideshow time To set the slideshow interval Using the Photo Stand Feature 104 105 105 106 Using the FAVORITE Folder ..................................... 116 Rotating the Display Image ...................................... 107 Using Image Roulette .............................................. 108 Adding Audio to a Snapshot .................................... 109 To re-record audio 110 121 OTHER SETTINGS To configure sound settings To set the volume level 121 122 Configuring Sound Settings ..................................... 121 Playing Back a Voice Recording File ........................ 111 Specifying an Image for the Startup Screen ........... 122 Configuring Power Down Image Settings ................ 123 Specifying the File Name Serial Number Generation Method .................................................. 125 5 INTRODUCTION Using the Alarm ........................................................ 126 To set an alarm Stopping the Alarm To select your Home Time zone To set the current time and date Changing the Date Format To display the World Time screen To configure World Time settings To configure summer time (DST) settings 126 127 127 128 129 129 130 131 142 PRINTING IMAGES To configure print settings for a single image To configure print settings for all images To print a single image To print a group of images Printing Precautions 144 145 146 148 149 DPOF ........................................................................ 143 Setting the Clock ...................................................... 127 Using PictBridge or USB DIRECT-PRINT ............... 146 Using World Time ..................................................... 129 PRINT Image Matching II ............................................. 150 Exif Print ................................................................... 150 Changing the Display Language ............................. 132 Changing the USB Port Protocol ............................. 132 ] (REC) and [ ] (PLAY) Buttons Configuring [ Power On/Off Functions ........................................... 133 Formatting Built-in Memory ...................................... 135 151 VIEWING IMAGES ON A COMPUTER USB Connection Precautions USB Connection Precautions 157 161 Using the Camera with a Windows Computer ........ 151 Using the Camera with a Macintosh Computer ....... 157 136 USING A MEMORY CARD To insert a memory card into the camera To remove a memory card from the camera Formatting a Memory Card Memory Card Precautions 137 138 138 139 Operations You Can Perform from Your Computer . 161 Using a Memory Card to Transfer Images to a Computer .................................................................. 162 Memory Data ............................................................ 163 DCF Protocol Memory Directory Structure Image Files Supported by the Camera Built-in Memory and Memory Card Precautions 163 163 165 165 Using a Memory Card .............................................. 137 Copying Files ........................................................... 140 To copy all the files in built-in memory to a memory card 140 To copy a file from a memory card to built-in memory 141 6 INTRODUCTION 166 USING THE CAMERA WITH A COMPUTER Creating an album Selecting an Album Layout Configuring Detailed Album Settings Viewing Album Files Saving an Album To delete an album About the bundled CD-ROM (CASIO Digital Camera Software) Computer System Requirements 166 168 168 171 173 174 183 APPENDIX Using the Album Feature ......................................... 166 Menu Reference ....................................................... 183 Indicator Lamp Reference ....................................... 185 REC mode PLAY mode USB Cradle Indicator Lamps Display Messages Main Specifications 186 187 187 192 193 Troubleshooting Guide ............................................. 188 Specifications ........................................................... 193 Installing the Software from the CD-ROM ............... 174 174 176 Installing Software from the CD-ROM in Windows ............................................................... 177 Getting Started Selecting a Language Viewing the Contents of the "Read me" File Installing an Application Viewing User Documentation (PDF Files) User Registration Exiting the Menu Application 178 178 178 179 179 180 180 Installing Software from the CD-ROM on a Macintosh .............................................................. 180 Installing Software Viewing User Documentation (PDF Files) 180 181 7 INTRODUCTION IMPORTANT! · The contents of this manual are subject to change without notice. · CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss resulting from the use of this manual. · CASIO COMPUTER CO., LTD. assumes no responsibility for any loss or claims by third parties which may arise through the use of the EX-Z30/EXZ40. · CASIO COMPUTER CO., LTD. shall not be held liable for any damages or losses suffered by you or any third party due to the use of Photo Loader and/or Photohands. · CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss caused by deletion of data as a result of malfunction, repairs, or battery replacement. Be sure to back up all important data on other media to protect against its loss. · The SD logo is a registered trademark. · Windows, Internet Explorer, and DirectX are registered trademarks of Microsoft Corporation. · Macintosh is a registered trademark of Apple Computer, Inc. · MultiMediaCard is a trademark of Infineon Technologies AG of Germany, and licensed to the MultiMediaCard Association (MMCA). · Acrobat and Acrobat Reader are trademarks of Adobe Systems Incorporated. · The USB driver (mass storage) uses Phoenix Technologies Ltd. software. Compatibility Software Copyright C 1997 Phoenix Technologies Ltd., All Rights Reserved. · Other company, product and service names used herein may also be trademarks or service marks of others. · Photo Loader and Photohands are the property of CASIO COMPUTER CO., LTD. Except as stipulated above, all copyrights and other related rights to these applications revert to CASIO COMPUTER CO., LTD. I Copyright Restrictions Except for the purposes of your own personal enjoyment, unauthorized copying of snapshot files, movie files, and audio files violates copyright laws and international contracts. Distribution to third parties of such files over the Internet without permission of the copyright holder, whether for profit or for free, violates copyright laws and international contracts. 8 INTRODUCTION Features · High-resolution CCD for beautiful prints EX-Z30: 3.20 million pixels (3.34 million total pixels) EX-Z40: 4.00 million pixels (4.23 million total pixels) · 2.0-inch TFT color LCD monitor screen · Long battery life The camera's low-power design combines with a largecapacity battery to provide more recording and playback between charges. · 12X seamless zoom (page 51) 3X optical zoom, 4X digital zoom · 9.7MB Flash memory Images can be recorded without using a memory card. · REC mode or PLAY mode power up (page 37) Press the [ ] (REC) or [ ] (PLAY) to turn on the camera and enter the mode you want to use. · Multi Auto Focus (page 63) When "Multi" is selected for the Auto Focus area, the camera takes simultaneous meter readings at seven different points and automatically selects the best one. This makes it possible to avoid erroneous focusing on the background, and ensure proper focus for a wide range of image types. · Pan Focus (page 64) This feature lets you lock the focus point and ensures that you do not miss that special moment when it happens. · Auto Pan Focus (page 62) When you press the shutter release all the way down without pausing, the camera immediately records the image without waiting for Auto Focus to be performed. This helps to avoid missing a special moment while you wait for the camera to Auto Focus. · Support for SD memory cards and MMC (MultiMedia Cards) for memory expansion (page 136) · Easy Charging (page 28) Just place the camera onto the USB cradle to charge its battery. · Easy Image Transfer (page 151) Transfer images to a computer simply by placing the camera onto the USB cradle. · Photo Stand feature (page 106) A slideshow of images in file memory can be played while the camera is on its USB cradle. · BESTSHOT (page 71) Simply select the sample scene that matches the type of image you are trying to record and the camera performs troublesome setups automatically for beautiful pictures every time. · Coupling Shot and Pre-shot (pages 75, 77) Coupling Shot lets you combine two subjects into a single image, while Pre-shot lets you add a subject to a previously recorded background image. This means you can create images that include you and your friend, even if you are the only two people around. You can use Coupling Shot and Pre-shot by selecting the applicable sample images in the BESTSHOT mode. 9 INTRODUCTION · Triple Self-timer mode (page 56) The self-timer can be set up to repeat three times, automatically. · Real-time histogram (page 84) An on-screen histogram lets you adjust exposure as you view the effect on overall image brightness, which makes shooting under difficult lighting conditions easier than ever before. · World Time (page 129) A simple operation sets the current time for your current location. You can select from among 162 cities in 32 time zones. · Alarm (page 126) A built-in alarm helps to keep you on time for important events, and even can be used in place of an alarm clock. You can also have a specific image appear, or a movie or audio file to play when the alarm time is reached. · Album Function (page 166) HTML files are generated automatically to create an album of recorded images. Album contents can be viewed and printed using a standard Web browser. Images can also be incorporated into Web pages quickly and easily. · Calendar screen (page 101) A simple operation displays a full-month calendar on the camera's monitor screen. Each day of the full-month calendar shows a thumbnail of the first image recorded for that date, which helps to make searching for a particular image quicker and easier. · Snapshot + Audio Mode (page 81) Adds audio to a snapshot. · Movie + Audio Mode (page 79) · Voice Recording (page 83) Quick and easy recording of voice input. · After Recording (page 109) Adds audio to images after they are recorded. · Selectable Sound Settings (page 121) You can configure different sounds to play whenever you turn on the camera, press the shutter release button halfway or all the way, or perform a key operation. · DCF Data Storage DCF (Design rule for Camera File system) data storage protocol provides image inter-compatibility between the digital camera and printers. · Digital Print Order Format (DPOF) (page 143) Images can be printed easily in the sequence you want using a DPOF compatible printer. DPOF can also be used when specifying images and quantities for printing by professional print services. 10 INTRODUCTION · PRINT Image Matching II Compatible (page 150) Images include PRINT Image Matching II data (mode setting and other camera setup information). A printer that supports PRINT Image Matching II reads this data and adjusts the printed image accordingly, so your images come out just the way you intended when you recorded them. · USB DIRECT-PRINT support (page 146) Your camera supports USB DIRECT-PRINT, which was developed by Seiko Epson Corporation. When connected directly to a printer that supports USB DIRECT-PRINT, you can select images to print and start the print operation directly from the camera. · PictBridge support (page 146) Your camera supports the PictBridge standard of the Camera and Imaging Products Association (CIPA). You can connect the camera directly to a printer that supports PictBridge, and perform image selection and printing using the camera monitor screen and controls. · Bundled with Photo Loader and Photohands (page 175) Your camera comes bundled with Photo Loader, the popular application that automatically loads images from your camera to your PC. It also comes with Photohands, and application that makes image retouching quick and easy. Precautions General Precautions Be sure to observe the following important precautions whenever using the EX-Z30/EX-Z40. All references in this manual to "this camera" and "the camera" refer to the CASIO EX-Z30/EX-Z40 Digital Camera. · Never try to take pictures or use the built-in display while operating a motor vehicle or while walking. Doing so creates the danger of serious accident. · Never try to open the case of the camera or attempt your own repairs. High-voltage internal components create the risk of electric shock when exposed. Always leave maintenance and repair work up to a CASIO authorized service center. · Never look at the sun or any other bright light through the camera's viewfinder. Doing so can damage your eyesight. · Keep the small parts and accessories of this camera out of the reach of small children. If swallowed accidentally, contact your physician immediately. · Never fire the flash in the direction of a person operating a motor vehicle. Doing so can interfere with the driver's vision and create the danger of accident. 11 INTRODUCTION · Never fire the flash while it is too close to the subject's eyes. Intense light from the flash can cause eye damage if it is fired too close to the eyes. This is especially true with young children. When using the flash, the camera should be at least one meter (3.3´) from the eyes of the subject. · Keep the camera away from water and other liquids, and never let it get wet. Moisture creates the danger of fire and electric shock. Never use the camera outdoors in the rain or snow, at the seashore or beach, in the bathroom, etc. · Should foreign matter or water ever get into the camera, immediately turn it off. Next, remove the camera's battery and/or unplug the AC adaptor power cord from the power outlet, and contact your dealer or nearest CASIO authorized service center. Using the camera under these conditions creates the danger of fire and electric shock. · Should you ever notice smoke or a strange odor coming out of the camera, immediately turn it off. Next, taking care you do not burn your fingers, remove the camera's battery and/or unplug the AC adaptor power cord from the power outlet, and contact your dealer or nearest CASIO authorized service center. Using the camera under these conditions creates the danger of fire and electric shock. After making sure there is no more smoke coming from the camera, take it to your nearest CASIO authorized service center for repair. Never attempt your own maintenance. · Never use the AC adaptor to power any other device besides this camera. Never use any other AC adaptor besides the one that comes with this camera. · Never cover the AC adaptor with a quilt, blanket, or other cover while it is in use, and do not use it near a heater. · At least once a year, unplug the AC adaptor power cord from the power outlet and clean the area around the prongs of the plug. Dust build up around the prongs can create the danger of fire. · If the camera's case should ever become cracked due to dropping it or otherwise subjecting it to rough treatment, immediately turn it off. Next, remove the camera's battery and/or unplug the AC adaptor power cord from the power outlet, and contact your dealer or nearest CASIO authorized service center. · Never use the camera inside of an aircraft or in any other areas where its use is prohibited. Doing so can result in an accident. · Physical damage and malfunction of this camera can cause the data stored in its memory to be deleted. Be sure to always keep backup copies of data by transferring them to personal computer memory. · Never open the battery compartment cover, disconnect the AC adaptor from the camera, or unplug the AC adaptor from the wall socket while recording images. Doing so will not only make storage of the current image impossible, it can also corrupt other image data already stored in file memory. 12 INTRODUCTION Test for proper operation before using the camera! Before using the camera to record important images, make sure you first record a number of test images and check the results to ensure that the camera is configured correctly and operating properly (page 17). Operating conditions · This camera is designed for use in temperatures ranging from 0°C to 40°C (32°F to 104°F). · Do not use or keep the camera in the following areas. -- In areas subject to direct sunlight -- In areas subject to high humidity or dust -- Near air conditioners, heaters, or other areas subject to temperature extremes -- Inside of a closed vehicle, especially one parked in the sun -- In areas subject to strong vibration Data Error Precautions · Your digital camera is manufactured using precision digital components. Any of the following creates the risk of corruption of data in file memory. -- Removing the battery or memory card, or setting the camera onto the USB cradle while the camera is performing a record or memory access operation -- Removing the battery, removing the memory card, or placing the camera onto the USB cradle while the operation lamp is still flashing after you turn off the camera -- Disconnecting the USB cable, removing the camera from the USB cradle, or disconnecting the AC adaptor from the USB cradle while a data communication operation is being performed -- Low battery power -- Other abnormal operations Any of the above conditions can cause an error message to appear on the monitor screen (page 192). Follow the instructions provided by the message to eliminate the cause of the error. 13 INTRODUCTION Condensation · When you bring the camera indoors on a cold day or otherwise expose it to a sudden change of temperature, there is the possibility that condensation can form on the exterior or on interior components. Condensation can cause malfunction of the camera, so you should avoid exposing it to conditions that might cause condensation. · To keep condensation from forming, place the camera into a plastic bag before moving it into a location that is much warmer or colder than your current location. Leave it in the plastic bag until the air inside the bag has a chance to reach the same temperature as the new location. If condensation does form, remove the battery from the camera and leave the battery compartment cover open for a few hours. Lens · Never apply too much force when cleaning the surface of the lens. Doing so can scratch the lens surface and cause malfunction. · Fingerprints, dust, or any other soiling of the lens can interfere with proper image recording. Never touch the lens with your fingers. You can remove dust particles from the lens surface by using a lens blower to blow them off. Next, wipe the surface of the lens with a soft lens cloth. Other · The camera may become slightly warm during use. This does not indicate malfunction. · If the exterior of the camera needs cleaning, wipe it with a soft, dry cloth. 14 QUICK START GUIDE QUICK START GUIDE 2. Place the camera onto the USB cradle to charge the battery (page 28). · Note that the shape of the AC adaptor depends on the area where you purchased the camera. · It takes about 190 minutes to achieve a full charge. First, charge the battery! 1. Load the battery (page 26). 1 1 Inlet Type Stopper 2 2 1 Plug-in Type 3 15 QUICK START GUIDE To configure display language and clock settings · Be sure to configure the following settings before using the camera to record images. (See page 42 for details.) 1. Press the power button to turn on the camera. 2. Press [ ] to select the language you want. 1 3. Press [SET] to register the language setting. 4. Use [ ], [ ], [ ], and [ ] to select the geographical area you want, and then press [SET]. 5. Use [ ] and [ ] to select the city you want, and then press [SET]. 6. Use [ ] and [ ] to select the summer time (DST) 2, 3, 4, 5, 6, 7, 8, 9 setting you want, and then press [SET]. 7. Use [ ] and [ ] to select the date format setting you want, and then press [SET]. 8. Set the date and the time. 9. Press [SET] to register the clock settings and exit the setting screen. 16 QUICK START GUIDE To record an image (See page 45 for details.) Green operation lamp To view a recorded image (See page 92 for details.) 1 3 10 1600 1200 NORMAL IN 1 1 / 1000 F2.6 04/12 24 04/ 12/24 12:58 12 58 2 Focus frame Snapshot Mode icon 2 1. Press [ ] (REC). 1. Press [ images. ] (PLAY). · If the (Snapshot Mode) icon is not on the monitor screen, use the procedure under "Using the On-screen Menus" (page 39) to change the "REC Mode" setting to " Snapshot". 2. Use [ ] and [ ] to scroll through the 2. Point the camera at the subject, use the monitor screen or viewfinder to compose the image, and then press the shutter release button half way. · When proper focus is achieved, the focus frame turns green and the green operation lamp lights. 3. Holding the camera still, gently press the shutter release button. 17 QUICK START GUIDE To delete an image (See page 112 for details.) 1 2, 3, 4, 5 1. Press [ ] (PLAY). ). 2. Press [ ] ( 3. Use [ ] and [ ] to display the image you want to delete. 4. Use [ ] and [ ] to select "Delete". · To exit the image delete operation without deleting anything, select "Cancel". 5. Press [SET] to delete the image. 18 GETTING READY GETTING READY I Button Operations Button operations are indicated by the button name inside of brackets ([ ]). This section contains information about things you need to know about and do before trying to use the camera. About This Manual This section contains information about the conventions used in this manual. I On-screen Text On-screen text is always enclosed by double quotation marks (" "). I Terminology The following table defines the terminology used in this manual. This term as used in this manual: "this camera" or "the camera" "file memory" Means this: The CASIO EX-Z30/EX-Z40 Digital Camera The location where the camera is currently storing images you record (page 46) The NP-40 Rechargeable Lithium Ion Battery The optionally available CASIO BC-30L rapid Charger Unit I File Memory The term "file memory" in this manual is a general term that refers to the location where your camera is currently storing the images you record. File memory can be any one of the following three locations. · The camera's built-in Flash memory · An SD memory card loaded in the camera · A MultiMediaCard loaded in the camera For more information about how the camera stores images, see page 114. "battery" "optional charger unit" 19 GETTING READY General Guide The following illustrations show the names of each component, button, and switch on the camera. Camera I Front 12 I Back 78 90 A B 1 Shutter release button 2 Power button 3 Flash 4 Microphone 5 Self-timer lamp 6 Lens 3 45 C H 6 G FE D 7 Viewfinder 8 Operation lamp 9 [ ] (PLAY mode) 0 [ ] (REC mode) A [MENU] button B Zoom button C Strap ring D [SET] button E [ ][ ][ ][ ] F [DISP] button G Monitor Screen H Speaker 20 GETTING READY I Bottom USB Cradle Simply placing your CASIO digital camera onto the USB cradle lets you perform the following tasks. · · · · Battery charging (page 28) Automatic transfer of images to a computer (page 151) Direct connection to a printer for printing (page 146) Viewing of images using the Photo Stand slideshow feature (page 106). I I Battery compartment cover J Connector K Tripod screw hole JK I Front 1 23 * Use this hole when attaching to a tripod. L 54 1 Camera connector 2 [USB] lamp 3 [USB] button 4 [CHARGE] lamp 5 [PHOTO] button I Back L Stopper M Memory card slot N Battery compartment M N 6 7 6 [DC IN 5.3V] (AC adaptor connector) 7 [USB] (USB port) 21 GETTING READY Monitor Screen Contents The monitor screen uses various indicators and icons to keep you informed of the camera's status. REC mode 1 2 34 5 6 7 8 C 9 0 B A None 2 Focus Mode indicator None Auto Focus Macro Pan Focus Infinity Manual Focus 5 REC modes Snapshot BESTSHOT Movie Snapshot Audio Voice Recording 8 Quality FINE NORMAL ECONOMY 9 3 White balance indicator 6 Memory capacity Auto Sunlight Overcast Shade Light Bulb Fluorescent Manual (Remaining number of storable images) Movie Recording: Remaining recording time Built-in memory selected for data storage. Memory card selected for data storage. 0 Date and time A EV value B Battery capacity C Focus frame · Focusing complete: Green · Focusing failed: Red 7 Image size · EX-Z30 2048 1536 pixels 2048 1360 (3:2) pixels 1600 1200 pixels 1280 960 pixels 640 480 pixels Movie Recording: recording time · EX-Z40 2304 1728 pixels 2304 1536 (3:2) pixels 1600 1200 pixels 1280 960 pixels 640 480 pixels Movie Recording: recording time 1 Flash Mode indicator None Auto Flash Off Flash On Red-eye reduction · If the camera detects that flash is required while auto flash is selected, the flash on indicator will appear when the shutter release button is pressed half way. 10s 2s 4 Self-timer None 1-Image Self-timer 10 sec Self-timer 2 sec Triple self-timer x3 22 GETTING READY D D Digital zoom indicator E Shutter speed value E F G H · An out of range aperture or shutter speed causes the corresponding monitor screen value to turn amber. F Aperture value G ISO sensitivity H Zoom indicator · Left side indicates optical zoom. · Right side indicates digital zoom. 23 GETTING READY PLAY mode 12 3 4 5 6 7 8 1 PLAY mode file type Snapshot Movie Snapshot Audio Voice Recording 5 Quality FINE NORMAL ECONOMY 6 2 Image protection indicator 3 Folder number/File number 4 Image size · EX-Z30 2048 1536 pixels 2048 1360 (3:2) pixels 1600 1200 pixels 1280 960 pixels 640 480 pixels Movie Playback: Elapsed play time · EX-Z40 2304 1728 pixels 2304 1536 (3:2) pixels 1600 1200 pixels 1280 960 pixels 640 480 pixels Movie Playback: Elapsed play time Built-in memory selected for data storage. Memory card selected for data storage. 7 Date and time 8 Battery capacity IMPORTANT! · Some information may not display properly if you display an image that was recorded using a different digital camera model. 24 GETTING READY Changing the Contents of the Monitor Screen Each press of the [DISP] button changes the contents of the monitor screen as shown below. Indicator Lamps You can find out the operational status of the camera and the USB cradle at a glance by checking the color of the indicator lamps, and whether a lamp is lit or flashing. For details, see "Indicator Lamp Reference" on page 185. Self-timer lamp Green operation lamp Indicators on (page 22) Histogram on (page 84) Indicators off Monitor screen off IMPORTANT! · You cannot turn off the monitor screen in the following cases: In the PLAY mode, in the BESTSHOT mode, when not recording in the Movie mode. · You cannot use the [DISP] button to change the contents of the monitor screen while a movie is being recorded, or while standing by for or performing audio recording. · In the Voice Recording mode, you can only turn indicators on and off. Red operation lamp [USB] lamp [CHARGE] lamp 25 GETTING READY Attaching the Strap Attach the strap to the strap ring as shown in the illustration. Power Requirements Your camera is powered by a rechargeable lithium ion battery (NP-40). To load the battery 1. While pressing the battery compartment cover on the bottom of the camera, slide the cover in the direction indicated by the arrow, and then swing it open. IMPORTANT! · Be sure to keep the strap around your wrist when using the camera to protect against accidentally dropping it. · The supplied strap is intended for use with this camera only. Do not use it for any other purpose. · Never swing the camera around by the strap. 26 GETTING READY 2. While pulling the stopper in the direction indicated by the arrow in the illustration, align the (­ ) mark on the battery with the (­ ) mark on the camera and slide the battery into the camera. (­) mark Stopper 3. Swing the battery compartment cover closed, and then slide it in the direction indicated by the arrow. IMPORTANT! · Use only the special NP-40 rechargeable lithium ion battery to power this camera. Use of any other type of battery is not supported. The battery is not charged when you purchase the camera. You need to charge the battery before using the camera for the first time (page 28). (­) marks NP-40 · Push the bottom of the battery, and make sure that the stopper securely locks the battery in place. 27 GETTING READY To remove the battery To charge the battery 1. Open the battery compartment cover. 2. Pull the stopper in the direction indicated by the arrow. · This will cause the battery to come part way out of the slot. Stopper 1. Connect the bundled AC adaptor to the [DC IN 5.3V] connector of the USB cradle, and then plug it in to a household power outlet. · Note that the shape of the AC adaptor depends on the area where you purchased the camera. USB Cradle [DC IN 5.3V] AC Adaptor AC power cord 3. Release the stopper and pull the battery from the camera. · Take care so you do not drop the battery. 28 GETTING READY NOTE · The bundled AC adaptor is designed for operation with any power supply in the range of 100V to 240V AC. Note, however, that the shape of the AC power cord plug varies according to country or geographic area. If you plan to use the AC adaptor in a geographic area where the power receptacle shape is different from that in your area, replace the AC power cord with one of the other ones that comes with the camera, or purchase a commercially available AC power cord that is compatible with the power outlets in that area. NOTE · The AC adaptor is designed for operation on power ranging from 100V AC to 240V AC. Note, however, that the shape of the power cord plug varies according to country or geographic area. It is up to you to find out if the shape of the AC adaptor power cord plug is compatible with local power outlets when traveling abroad. 2. Turn off the camera. 3. Set the camera onto the USB cradle. · Do not place the camera onto the USB cradle while it is turned on. · The [CHARGE] lamp on the USB cradle should turn red, indicating that charging has started. When charging is complete, the [CHARGE] lamp will turn green. AC Adaptor USB Cradle [DC IN 5.3V] [CHARGE] lamp 4. After charging is complete, remove the camera from the USB cradle. 29 GETTING READY IMPORTANT! · It takes about 190 minutes to achieve a full charge. Actual charging time depends on current battery capacity and charging conditions. · Use only the USB cradle (CA-24) that comes with the camera or the optionally available rapid charger unit (BC-30L) to charge the special NP-40 rechargeable lithium ion battery. Never use any other charging device. · Use only the bundled AC adaptor. Never use any other type of AC adaptor. Do not use optionally available AD-C40, AD-C620 and AD-C630 AC adaptors with this camera. · Make sure that the camera connector of the USB cradle is securely inserted into the camera's connector as far as it will go. · The [CHARGE] lamp may remain amber colored and the charge operation may not start right away if you try to charge immediately after using the camera (which causes battery to become warm) or when it is too hot or too cold where you are performing the charge operation. If this happens, simply wait until the battery reaches normal temperature. The [CHARGE] lamp will turn red and charging will start when the battery temperature returns to the allowable charging temperature range. · If the [CHARGE] lamp starts flashing red, it means that an error occurs while charging. An error can be caused by any of the following: a problem with the USB cradle, a problem with the camera, or a problem with the battery or how it is loaded. Remove the camera from the USB cradle and see if it works normally. · You can use the USB cradle to charge the camera's battery, to exchange data with a computer over a USB connection, or when using the Photo Stand feature only. 30 GETTING READY I If the camera works normally I Battery Life Guidelines The battery life guideline values given below indicate the amount of time under the conditions defined below the table, until power automatically turns off due to battery failure. They do not guarantee that the battery will provide the amount of service indicated. Low temperatures and continued use reduce battery life. Model Operation Number of Shots (CIPA)*1 (Operating Time) Number of Shots, Continuous Recording*2 (Operating Time) Continuous Playback*3 (Continuous Snapshot Recording) Continuous Voice Recording*4 EX-Z30 Apporoximate Battery Life 360 shots (180 minutes) EX-Z40 Apporoximate Battery Life 360 shots (180 minutes) 1. Continue using the camera until the current charge is used up, and then charge the battery. I If the camera does not work normally This can mean there is a problem with how the battery is loaded. 1. Remove the battery from the camera and check the battery contacts for dirt. If the contacts are dirty, wipe them clean with a dry cloth. 1260 shots (210 minutes) 1140 shots (190 minutes) 2. Check to make sure that the AC adaptor's power cord is connected securely to the power outlet and USB cradle. · If the same symptoms occur again when you place the camera on the USB cradle after taking the above steps, contact a CASIO authorized service center. 360 minutes 360 minutes 300 minutes 300 minutes 31 GETTING READY Supported Battery: NP-40 (Rated Capacitance: 1230mAh) Storage Medium: SD Memory Card *1 Number of Shots (CIPA) · CIPA Standard · Temperature: 23°C (73°F) · Monitor Screen: On · Zoom operation between full wide to full telephoto every 30 seconds, during which two images are recorded, one image with flash; power turned off and back on every time 10 images are recorded. *2 Continuous Recording Conditions · Temperature: 23°C (73°F) · Monitor screen: On · Flash: Off · Image recorded every 10 seconds, alternating full wide-angle and full telephoto zoom *3 Continuous Playback Conditions · Temperature: 23°C (73°F) · Scroll one image about every 10 seconds *4 Voice recording times are based on continuous recording. · The above values are based on a new battery starting from a full charge. Repeated charging shortens battery life. · Battery life is greatly affected by how much you use flash, zoom and other functions, and how long you leave power turned on. I Tip to Make the Battery Last Longer · If you do not need the flash while recording, select (flash off) for the flash mode. See page 53 for more information. · You can also conserve battery power by using the [DISP] button to turn off the monitor screen. 32 GETTING READY I Low Battery Indicator The following shows how the battery capacity indicator on the monitor screen changes as battery power is used. The indicator means that remaining battery power is low. Note that you will not be able to record images while the battery indicator is . Charge the battery immediately whenever either of these indicators appears. Battery Level Indicator High Low Power Supply Precautions Note the following precautions when handling or using the battery and the optional charger unit. I Battery Handling Precautions G SAFETY PRECAUTIONS Be sure to read the following Safety Precautions before trying to use the battery for the first time. Keep these safety precautions and all operating instructions on hand for future reference. NOTES · The term "battery" in this manual refers to the CASIO NP-40 Rechargeable Lithium Ion Battery. · Use only the USB cradle (CA-24) that comes with the camera or the optionally available rapid charger unit (BC-30L) to charge the special NP-40 rechargeable lithium ion battery. Never use any other charging device. 33 GETTING READY · Failure to observe any of the following precautions while using the battery creates the risk of overheating, fire, and explosion. -- Never use any other type of charger except the optional charger unit specified for the battery. -- Never try to use the battery to power any other device other than this camera. -- Never use or leave the battery near open flame. -- Never place the battery in a microwave oven, throw it into fire, or otherwise expose it to intense heat. -- Make sure the battery is oriented correctly when you load it into the camera or attach it to the optional charger unit. -- Never carry or store the battery together with items that can conduct electricity (necklaces, pencil lead, etc.) -- Never try to take the battery apart, modify it in any way, or expose it to strong impact. -- Do not immerse the battery in fresh water or salt water. -- Do not use or leave the battery under direct sunlight, in an automobile parked in the sun, or in any other area subject to high temperatures. · Should you ever notice leakage, strange odor, heat generation, discoloration, deformation, or any other abnormal condition while using, charging, or storing a battery, immediately remove it from the camera or optional charger unit and keep it away from open flame. · If the battery does not achieve full charge after the normal charging time has passed, stop charging. Continued charging creates the risk of overheating, fire, and explosion. · Battery fluid can damage your eyes. Should battery fluid get into your eyes accidentally, immediately rinse them with clean tap water and then consult a physician. · Be sure to read page 28 of this User's Guide and the instructions that come with the optional charger unit before using or charging the battery. · If the battery is to be used by young children, make sure that a responsible adult makes them aware of the precautions and proper handling instructions and make sure that they handle the battery correctly. · Should fluid from the battery accidentally get onto clothing or your skin, immediately rinse it off with clean tap water. Prolonged contact with battery fluid can cause skin irritation. 34 GETTING READY G PRECAUTIONS DURING USE · The battery is designed for use with this CASIO digital camera only. · Use only the USB cradle that comes with the camera or the specified optional charger unit to charge the battery. Never use any other type of charger unit for charging. · A new battery is not charged. Be sure to charge the battery before using it for the first time. · Use of a battery in cold environments shortens the operating time you can expect on a full charge. Charge the battery in a location where the temperature is in the range of 10°C to 35°C (50°F to 95°F). Charging outside this temperature range can cause charging to take longer than normal or even cause charging to fail. · Very limited operation following a full charge indicates that the battery has reached the end of its service life. Replace the battery with a new one. · Never wipe the battery with thinner, benzene, alcohol, or other volatile agents or chemically treated rags. Doing so can cause deformation of the battery and lead to malfunction. G BATTERY STORAGE PRECAUTIONS · Make sure you remove the battery when you do not plan to use the camera for a long time. A battery left in the camera discharges very small amounts of power even when power is turned off, which can lead to a dead battery or the need for longer charging before the next use. · Store the battery in a cool, dry place (20°C (68 °F) or lower). G USING THE BATTERY · See page 28 of this manual or the instructions that come with the optional charger unit for information about charging procedures and charging times. · When transporting a battery, keep it either loaded in the camera or stored in its case. 35 GETTING READY I USB Cradle and AC Adaptor Precautions · Never use an electrical outlet whose voltage is outside the rating marked on the AC adaptor. Doing so can create the danger of fire or electric shock. Use only the bundled AC adaptor specified for this camera. · Do not allow the AC adaptor cord to become cut or damaged, do not place heavy objects on it, and keep it away from heat. A damaged power cord creates the risk of fire and electric shock. · Never try to modify the AC adaptor cord, or subject it to severe bending, twisting, or pulling. Doing so creates the risk of fire and electric shock. · Never touch the AC adaptor while your hands are wet. Doing so creates the risk of electric shock. · Do not overload extension cords or wall outlets. Doing so creates the danger of fire and electric shock. · Should the cord of the AC adaptor become damaged (exposed internal wiring), request a replacement from a CASIO authorized service center. A damaged AC adaptor cord creates the danger of fire or electric shock. Caution! · Use the AC adaptor where it will not be splashed with water. Water creates the risk of fire and electric shock. · Do not place a vase or any other container filled with liquid on top of the AC adaptor. Water creates the risk of fire and electric shock. Caution! · Make sure you always remove the camera from the USB cradle before connecting or disconnecting the AC adaptor. · Charging, USB data communication, and using the Photo Stand feature can cause the AC adaptor to become warm. This is normal and does not indicate malfunction. · Unplug the AC power cord from the power outlet whenever you are not using it. · Never place a blanket or any other cover on the AC adaptor. Doing so creates the risk of fire. 36 GETTING READY Turning the Camera On and Off I To turn on the camera Press the power button, [ ] (REC) button, or [ ] (PLAY) button. This will cause the green operation lamp to light momentarily, and then power will turn on. The mode the camera enters depends on which button you pressed to turn it on. To enter this mode at startup: REC PLAY Press this button to turn on the camera: Power button or [ [ ] (PLAY) button ] (REC) button NOTES · Pressing [ ] (REC) to turn on the camera enters the REC mode, while pressing [ ] (PLAY) enters the PLAY mode. · Pressing [ ] (PLAY) while in the REC mode switches to the PLAY mode. The lens retracts about 10 seconds after switching modes. IMPORTANT! · If camera power is turned off by the Auto Power Off feature, press the power button, [ ] (REC) or [ ] (PLAY) to turn it back on again. · Pressing the power button or [ ] (REC) to turn on the camera also causes the lens to extend. Take care to any interference with the lens operation or allowing anything to strike the lens when it is extended. Green operation lamp Power button [ ] (PLAY) [ ] (REC) 37 GETTING READY I To turn off the camera Press the power button to turn off the camera. NOTE · You can setup the camera so it does not turn on when you press the [ ] (REC) or [ ] (PLAY) button, or to turn off when you press the [ ] (REC) or [ ] (PLAY) button. For details, see "Configuring [ ] (REC) and [ ] (PLAY) Buttons Power On/Off Functions" on page 133. Configuring Power Saving Settings You can configure the settings described below to conserve battery power. : Automatically turns off the monitor screen if no operation is performed for a specified amount of time in the REC mode. Performing any button operation causes the monitor screen to turn back on. Auto Power Off : Turns off power if you do not perform any operation for a specified amount of time. Sleep 1. Turn on the camera. 2. Press [MENU]. 3. Use [ ] and [ ] to select the "Set Up" tab. 4. Use [ ] and [ ] to select the feature whose setting you want to configure, and then press [ ]. 38 GETTING READY G See page 39 for information about how to use menus. To configure this feature: Sleep Auto Power Off Select this setting: Sleep Auto Power Off Using the On-screen Menus Pressing [MENU] displays menus on the monitor screen that you can use to perform various operations. The menu that appears depends on whether you are in the REC mode or the PLAY mode. The following shows an example menu procedure in the REC mode. 5. Use [ ] and [ ] to change the currently selected setting, and then press [SET]. · Available Sleep settings are: "30 sec", "1 min", "2 min", and "Off". · Available Auto Power Off settings are: "2 min" and "5 min". · Note that the Sleep feature does not operate in the PLAY mode. · Pressing any button while the camera is in the Sleep state immediately turns the monitor screen back on. · The Auto Power Off and Sleep features are disabled in the following cases. -- When the camera is connected to a computer or some other device through the USB cradle -- While a slideshow is in progress -- While playing back a voice recording file