User manual CASIO EX-Z50

E Digital Camera EX-Z50 User's Guide Thank you for purchasing this CASIO product. · Before using it, be sure to read the precautions contained in this User's Guide. · Keep the User's Guide in a safe place for future reference. · For the most up-to-date information about this product, visit the official EXILIM Website at http://www.exilim.com/. K879PCM1DKX INTRODUCTION INTRODUCTION Unpacking Check to make sure that all of the items shown below are included with your camera. If something is missing, contact your dealer as soon as possible. Camera Rechargeable Lithium Ion Battery (NP-40) USB Cradle (CA-24) Strap CD-ROM USB Cable Basic Reference · Note that the shape of the AC adaptor depends on the area where you purchased the camera. * The shape of the AC power cord plug varies according to country or geographic area. Special AC Adaptor (Inlet Type) (AD-C51G) AC Power Cord * Special AC Adaptor (Plug-in Type) (AD-C51J) 2 INTRODUCTION Contents 2 INTRODUCTION Unpacking .................................................................... 2 Features ....................................................................... 9 Precautions ................................................................ 12 20 GETTING READY About This Manual ..................................................... 20 General Guide ............................................................ 21 Camera USB Cradle Changing the Contents of the Monitor Screen 21 23 26 Monitor Screen Contents ........................................... 24 Attaching the Strap .................................................... 28 Power Requirements .................................................. 29 Loading and Removing the Rechargeable Battery To charge the battery Power Supply Precautions Turning the Camera On and Off Configuring Power Saving Settings 29 31 36 39 41 16 QUICK START GUIDE First, charge the battery! ............................................ 16 To configure display language and clock settings ..... 17 To record an image .................................................... 18 To view a recorded image .......................................... 19 To delete an image ..................................................... 19 Using the On-screen Menus ...................................... 42 Configuring Display Language and Clock Settings ... 44 To configure display language and clock settings 45 3 INTRODUCTION 48 BASIC IMAGE RECORDING Specifying the Recording Mode Aiming the Camera Recording an Image 48 49 50 Adjusting White Balance ............................................ 78 Configuring the White Balance Setting Manually 79 83 84 Recording an Image ................................................... 48 Using the BESTSHOT Mode ..................................... 81 Creating Your Own BESTSHOT Setup To delete a BESTSHOT user setup Using the Optical Viewfinder ...................................... 54 Using Zoom ................................................................ 55 Optical Zoom Digital Zoom Flash Unit Status Changing the Flash Intensity Setting Using Flash Assist 55 57 60 61 61 Combining Shots of Two People into a Single Image (Coupling Shot) ................................. 85 Recording a Subject onto an Existing Background Image (Pre-shot) .................................... 87 Recording Images of Business Cards and Documents (Business Shot) ...................................... 89 To use Business Shot 90 Using the Flash .......................................................... 59 Using the Movie Mode ............................................... 91 Recording Audio ......................................................... 94 Adding Audio to a Snapshot Recording Your Voice 94 95 Using the Self-timer ................................................... 63 Specifying Image Size ............................................... 65 Specifying Image Quality ........................................... 66 Using the Histogram ................................................... 97 REC Mode Camera Settings ...................................... 99 Specifying ISO Sensitivity Specifying Outline Sharpness Specifying Color Saturation Specifying Contrast Turning the On-screen Grid On and Off Turning Image Review On and Off Using Icon Help Assigning Functions to the [ ] and [ ] Keys Specifying Power On Default Settings Resetting the Camera 100 101 101 102 102 103 103 104 105 107 68 OTHER RECORDING FUNCTIONS Using Using Using Using Using Using Auto Focus the Macro Mode Pan Focus the Infinity Mode Manual Focus Focus Lock 69 71 72 73 74 75 Selecting the Focus Mode ......................................... 68 Exposure Compensation (EV Shift) ........................... 76 4 INTRODUCTION 108 PLAYBACK Playing an Audio Snapshot 109 127 FILE MANAGEMENT Memory Folders and Files To protect a single file To protect all files in memory To To To To copy a file to the FAVORITE folder display a file in the FAVORITE folder delete a file from the FAVORITE folder delete all files from the FAVORITE folder 127 128 129 129 131 132 132 Basic Playback Operation ........................................ 108 Flipping the Display .................................................. 110 Zooming the Display Image ..................................... 111 Resizing an Image ................................................... 112 Cropping an Image ................................................... 113 Playing a Movie ........................................................ 114 Displaying the 9-image View .................................... 115 Displaying the Calendar Screen .............................. 116 Playing a Slideshow ................................................. 117 Using the Photo Stand Feature 119 Folders ...................................................................... 127 Protecting Files ........................................................ 128 Using the FAVORITE Folder .................................... 129 133 OTHER SETTINGS To configure sound settings To set the volume level 133 134 Rotating the Display Image ...................................... 120 Using Image Roulette .............................................. 121 Adding Audio to a Snapshot .................................... 122 To re-record audio 123 Configuring Sound Settings ..................................... 133 Specifying an Image for the Startup Screen ........... 134 Configuring Power Down Image Settings ................ 135 Specifying the File Name Serial Number Generation Method .................................................. 137 Using the Alarm ....................................................... 137 Setting the Clock ...................................................... 139 To select your Home Time zone To set the current time and date Changing the Date Format 139 140 140 Playing Back a Voice Recording File ....................... 124 125 DELETING FILES Deleting a Single File ............................................... 125 Deleting All Files ...................................................... 126 5 INTRODUCTION Using World Time ..................................................... 141 To display the World Time screen To configure World Time settings 141 141 152 PRINTING IMAGES To configure print settings for a single image To configure print settings for all images 154 155 DPOF ........................................................................ 153 Changing the Display Language .............................. 142 Changing the USB Port Protocol ............................. 143 Configuring [ ] (REC) and [ ] (PLAY) Power On/Off Functions ........................................... 144 Formatting Built-in Memory ...................................... 145 Using PictBridge or USB DIRECT-PRINT ............... 156 PRINT Image Matching III ............................................ 159 Exif Print ................................................................... 159 146 USING A MEMORY CARD To insert a memory card into the camera To remove a memory card from the camera Formatting a Memory Card To copy all the files in built-in memory to a memory card To copy a specific file from a memory card to built-in memory 147 148 148 160 VIEWING IMAGES ON A COMPUTER Using a Memory Card .............................................. 147 Using the Camera with a Windows Computer ......... 160 Using the Camera with a Macintosh Computer ....... 166 Operations You Can Perform from Your Computer .... 170 Using a Memory Card to Transfer Images to a Computer .................................................................. 171 Memory Data ............................................................ 172 DCF Protocol Memory Folder Structure Image Files Supported by the Camera 172 172 174 Copying Files ............................................................ 150 150 151 6 INTRODUCTION 175 USING THE CAMERA WITH A COMPUTER Creating an album Selecting an Album Layout Configuring Detailed Album Settings Viewing Album Files Saving an Album To delete an album About the bundled CD-ROM (CASIO Digital Camera Software) Computer System Requirements Getting Started Selecting a Language Viewing the Contents of the "Read me" File Installing an Application Viewing User Documentation (PDF Files) User Registration Exiting the Menu Application 175 177 177 180 182 183 192 APPENDIX Using the Album Feature ......................................... 175 Menu Reference ....................................................... 192 Indicator Lamp Reference ........................................ 195 Troubleshooting Guide ............................................. 198 If you have problems installing the USB driver... Display Messages 201 202 Specifications ........................................................... 204 Installing the Software from the CD-ROM ............... 183 183 185 187 187 187 188 188 189 189 Installing Software from the CD-ROM in Windows ... 186 Installing Software from the CD-ROM on a Macintosh ......................................... 189 Installing Software Viewing User Documentation (PDF Files) 189 190 7 INTRODUCTION IMPORTANT! · The contents of this manual are subject to change without notice. · CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss resulting from the use of this manual. · CASIO COMPUTER CO., LTD. assumes no responsibility for any loss or claims by third parties which may arise through the use of the EX-Z50. · CASIO COMPUTER CO., LTD. shall not be held liable for any damages or losses suffered by you or any third party due to the use of Photo Loader and/or Photohands. · CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss caused by deletion of data as a result of malfunction, repairs, or battery replacement. Be sure to back up all important data on other media to protect against its loss. · Note that the example screens and product illustrations shown in this User's Guide may differ somewhat by the screens and configuration of the actual camera. · The SD logo is a registered trademark. · Windows, Internet Explorer, and DirectX are registered trademarks of Microsoft Corporation. · Macintosh is a registered trademark of Apple Computer, Inc. · MultiMediaCard is a trademark of Infineon Technologies AG of Germany, and licensed to the MultiMediaCard Association (MMCA). · Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. · Other company, product and service names used herein may also be trademarks or service marks of others. · Photo Loader and Photohands are the property of CASIO COMPUTER CO., LTD. Except as stipulated above, all copyrights and other related rights to these applications revert to CASIO COMPUTER CO., LTD. 8 INTRODUCTION I Copyright Restrictions Except for the purposes of your own personal enjoyment, unauthorized copying of snapshot files, movie files, and audio files violates copyright laws and international contracts. Distribution to third parties of such files over the Internet without permission of the copyright holder, whether for profit or for free, violates copyright laws and international contracts. Features · 5 million effective pixels The CCD provides 5.25 million total pixels of very highresolution for crisp, clear, prints and display images. · 2.0-inch TFT color LCD monitor screen · Long battery life A low-power design combines with a large-capacity battery to provide more recording and playback between charges. · 12X zoom (page 55) 3X optical zoom, 4X digital zoom · 9.3MB flash memory Images can be recorded without using a memory card. · REC mode or PLAY mode power up (page 39) Press [ ] (REC) or [ ] (PLAY) to turn on the camera and enter the mode you want to use. · Multi Auto Focus (page 70) When "Multi" is selected for the Auto Focus area, the camera takes simultaneous meter readings at seven different points and automatically selects the best one. · Pan Focus (page 72) This feature lets you lock the focus point. 9 INTRODUCTION · Auto Pan Focus (page 69) When you press the shutter button all the way down without pausing, the camera immediately records the image without waiting for Auto Focus to be performed. This helps to avoid missing a special moment while you wait for the camera to Auto Focus. · Support for SD memory cards and MMC (MultiMedia Cards) for memory expansion (page 146) · Bundled with a USB Cradle (pages 31, 119, 156, 160) The bundled USB cradle can be used to charge the camera's battery, and to transfer images to a computer. A Photo Stand feature lets you view images while the camera is on the cradle. · BESTSHOT (page 81) Simply select the sample scene that matches the type of image you are trying to record and the camera performs troublesome setups automatically for beautiful pictures every time. · Business Shot (page 89) Business Shot automatically corrects rectangular shapes when recording the image of a business card, document, whiteboard, or similar subjects from an angle. · Coupling Shot and Pre-shot (pages 85, 87) Coupling Shot lets you combine two subjects into a single image, while Pre-shot lets you add a subject to a previously recorded background image. This means you can create images that include you and your friend, even if you are the only two people around. · Triple Self-timer (page 63) The self-timer can be set up to repeat three times, automatically. · Real-time histogram (page 97) An on-screen histogram lets you adjust exposure as you view the effect on overall image brightness. · World Time (page 141) A simple operation sets the current time for your current location. You can select from among 162 cities in 32 time zones. · Alarm (page 137) A built-in alarm helps to keep you on time for important events, and even can be used in place of an alarm clock. You can also have a specific image appear, or a movie or audio file to play when the alarm time is reached. 10 INTRODUCTION · Album Function (page 175) HTML files are generated automatically to create an album of recorded images. Album contents can be viewed and printed using a standard Web browser. Images can also be incorporated into Web pages quickly and easily. · Calendar screen (page 116) A simple operation displays a full-month calendar on the camera's monitor screen. Each day of the full-month calendar shows a thumbnail of the first image recorded for that date, which helps to make searching for a particular image quicker and easier. · Audio Snapshot Mode (page 94) Use this mode to record snapshots that also include audio. · Movie + Audio Mode (page 91) · Voice Recording (page 95) Quick and easy recording of voice input. · After Recording (page 122) Use this mode to add audio to snapshots after you record them. · Selectable Sound Settings (page 133) You can configure different sounds to play whenever you turn on the camera, press the shutter button half-way or all the way, or perform a key operation. · DCF Data Storage (page 172) DCF (Design rule for Camera File system) data storage protocol provides image compatibility between the digital camera and printers. · Digital Print Order Format (DPOF) (page 153) Images can be printed easily in the sequence you want using a DPOF compatible printer. DPOF can also be used when specifying images and quantities for printing by professional print services. · PRINT Image Matching III Compatible (page 159) Images include PRINT Image Matching III data (mode setting and other camera setup information). A printer that supports PRINT Image Matching III reads this data and adjusts the printed image accordingly, so your images come out just the way you intended when you recorded them. 11 INTRODUCTION · USB DIRECT-PRINT and PictBridge support (page 156) Connect directly to a USB DIRECT-PRINT or PictBridge compatible printer and you can print images without going through a computer. · Bundled with Photo Loader and Photohands (page 184) Your camera comes bundled with Photo Loader, the popular application that automatically loads images from your camera to your PC. It also comes with Photohands, and application that makes image retouching quick and easy. Precautions I General Precautions Be sure to observe the following important precautions whenever using the EX-Z50. All references in this manual to "camera" refer to the CASIO EX-Z50 Digital Camera. · Never try to take pictures or use the built-in display while operating a motor vehicle or while walking. Doing so creates the risk of serious accident. · Never try to open the case of the camera or attempt your own repairs. High-voltage internal components create the risk of electric shock when exposed. Always leave maintenance and repair work up to a CASIO authorized service center. · Never look at the sun or any other bright light through the camera's viewfinder. Doing so can damage your eyesight. · Keep the small parts and accessories of this camera out of the reach of small children. If swallowed accidentally, contact your physician immediately. · Never fire the flash in the direction of a person operating a motor vehicle. Doing so can interfere with the driver's vision and create the risk of accident. 12 INTRODUCTION · Never fire the flash while it is too close to the subject's eyes. Intense light from the flash can cause eye damage if it is fired too close to the eyes. This is especially true with young children. When using the flash, the camera should be at least one meter (3.3´) from the eyes of the subject. · Keep the camera away from water and other liquids, and never let it get wet. Moisture creates the risk of fire and electric shock. Never use the camera outdoors in the rain or snow, at the seashore or beach, in the bathroom, etc. · Should foreign matter or water ever get into the camera, immediately turn it off. Next, remove the camera's battery and/or unplug the AC adaptor power cord from the power outlet, and contact your dealer or nearest CASIO authorized service center. Using the camera under these conditions creates the risk of fire and electric shock. · Should you ever notice smoke or a strange odor coming out of the camera, immediately turn it off. Next, taking care you do not burn your fingers, remove the camera's battery and/or unplug the AC adaptor power cord from the power outlet, and contact your dealer or nearest CASIO authorized service center. Using the camera under these conditions creates the risk of fire and electric shock. After making sure there is no more smoke coming from the camera, take it to your nearest CASIO authorized service center for repair. Never attempt your own maintenance. · Never use the AC adaptor to power any other device besides this camera. Never use any other AC adaptor besides the one that comes with this camera. · Never cover the AC adaptor with a quilt, blanket, or other cover while it is in use, and do not use it near a heater. · At least once a year, unplug the AC adaptor power cord from the power outlet and clean the area around the prongs of the plug. Dust build up around the prongs can create the risk of fire. · If the camera's case should ever become cracked due to dropping it or otherwise subjecting it to rough treatment, immediately turn it off. Next, remove the camera's battery and/or unplug the AC adaptor power cord from the power outlet, and contact your dealer or nearest CASIO authorized service center. · Never use the camera inside of an aircraft or in any other area where its use is prohibited. Doing so creates the risk of accident. · Physical damage and malfunction of this camera can cause the data stored in its memory to be deleted. Always keep backup copies of data by transferring them to personal computer memory. · Never open the battery cover, disconnect the AC adaptor from the camera, or unplug the AC adaptor from the wall socket while an image is being recorded. Doing so will not only make storage of the current image impossible, it can also corrupt other image data already stored in file memory. 13 INTRODUCTION I Test for proper operation before using the camera! Before using the camera to record important images, make sure you first record a number of test images and check the results to ensure that the camera is configured correctly and operating properly (page 16). Any of the above conditions can cause an error message to appear on the monitor screen (page 202). Follow the instructions provided by the message to eliminate the cause of the error. I Operating conditions · This camera is designed for use in temperatures ranging from 0°C to 40°C (32°F to 104°F). · Do not use or keep the camera in the following areas. -- In areas subject to direct sunlight -- In areas subject to high humidity or dust -- Near air conditioners, heaters, or other areas subject to temperature extremes -- Inside of a closed vehicle, especially one parked in the sun -- In areas subject to strong vibration I Data Error Precautions · Your digital camera is manufactured using precision digital components. Any of the following creates the risk of corruption of data in file memory. -- Removing the battery or memory card, or setting the camera onto the USB cradle while the camera is performing a record or memory access operation -- Removing the battery, removing the memory card, or placing the camera onto the USB cradle while the green operation lamp is still flashing after you turn off the camera -- Disconnecting the USB cable, removing the camera from the USB cradle, or disconnecting the AC adaptor from the USB cradle while a data communication operation is being performed -- Low battery power -- Other abnormal operations 14 INTRODUCTION I Condensation · When you bring the camera indoors on a cold day or otherwise expose it to a sudden change of temperature, there is the possibility that condensation can form on the exterior or on interior components. Condensation can cause malfunction of the camera, so you should avoid exposing it to conditions that might cause condensation. · To keep condensation from forming, place the camera into a plastic bag before moving it into a location that is much warmer or colder than your current location. Leave it in the plastic bag until the air inside the bag has a chance to reach the same temperature as the new location. If condensation does form, remove the battery from the camera and leave the battery cover open for a few hours. I Lens · Never apply too much force when cleaning the surface of the lens. Doing so can scratch the lens surface and cause malfunction. · Fingerprints, dust, or any other soiling of the lens can interfere with proper image recording. Never touch the lens with your fingers. You can remove dust particles from the lens surface by using a lens blower to blow them off. Next, wipe the surface of the lens with a soft lens cloth. I Other · The camera may become slightly warm during use. This does not indicate malfunction. · If the exterior of the camera needs cleaning, wipe it with a soft, dry cloth. 15 QUICK START GUIDE QUICK START GUIDE 2. Place the camera onto the USB cradle to charge the battery (page 31). · Note that the shape of the AC adaptor depends on the area where you purchased the camera. · It takes about 190 minutes to achieve a full charge. First, charge the battery! 1. Load the battery into the camera (page 29). 1 1 Inlet Type Stopper 2 2 1 Plug-in Type 3 [CHARGE] lamp Charging: Lights red Charging Complete: Lights green 16 QUICK START GUIDE To configure display language and clock settings · Be sure to configure the following settings before using the camera to record images. See page 44 for details. 1. Press the power button to turn on the camera. 2. Press [ ] to select the language you want. 1 3. Press [SET] to register the language setting. 4. Use [ ], [ ], [ ], and [ ] to select the geographical area you want, and then press [SET]. 5. Use [ ] and [ ] to select the city you want, and then press [SET]. 6. Use [ ] and [ ] to select the summer time (DST) 2, 3, 4, 5, 6, 7, 8, 9 setting you want, and then press [SET]. 7. Use [ ] and [ ] to select the date format setting you want, and then press [SET]. 8. Set the date and the time. 9. Press [SET] to register the clock settings and exit the setting screen. 17 QUICK START GUIDE To record an image Green operation lamp See page 48 for details. 3. Use [ ] and [ ] to select the "REC" tab. 4. Use [ ] and [ ] to select "REC Mode", and then press [ ]. 1 7 5. Use [ ] and [ ] to select " press [SET]. · This causes " screen. Snapshot", and then 2 3,4,5 6 10 " (Snapshot mode) to appear on the monitor 6. Point the camera at the subject, use the monitor screen or viewfinder to compose the image, and then press the shutter button half way. · When proper focus is achieved, the focus frame turns green and the green operation lamp lights. Snapshot mode icon Focus frame 1600 1200 NORMAL IN 1 / 1000 F2.6 04/12 24 04/ 12/24 12:58 12 58 1. Press [ ] (REC). 7. Holding the camera still, gently press the shutter button all the way down. 2. Press [MENU]. 18 QUICK START GUIDE To view a recorded image See page 108 for details. To delete an image See page 125 for details. 1 1 2 2, 3, 4, 5 1. Press [ images. ] (PLAY). 1. Press [ ] (PLAY). ). 2. Use [ ] and [ ] to scroll through the 2. Press [ ] ( delete. 3. Use [ ] and [ ] to display the image you want to 4. Use [ ] and [ ] to select "Delete". · To exit the image delete operation without deleting anything, select "Cancel". 5. Press [SET] to delete the image. 19 GETTING READY GETTING READY This term as used in this manual: "digital noise" Means this: Tiny flecks or "snow" in a recorded image or on the monitor screen, which makes the image look grainy. The currently selected recording mode (Snapshot, BESTSHOT, Movie, Voice Recording, Audio Snapshot) This section contains information about things you need to know about and do before trying to use the camera. About This Manual This section contains information about the conventions used in this manual. "a REC mode" I Terminology The following table defines the terminology used in this manual. This term as used in this manual: "camera" "file memory" Means this: The CASIO EX-Z50 Digital Camera The location where the camera is currently storing images you record (page 50) The NP-40 Rechargeable Lithium Ion Battery The optionally available CASIO BC-30L rapid charger I Button Operations Button operations are indicated by the button name inside of brackets ([ ]). I On-screen Text On-screen text is always enclosed by double quotation marks (" "). "battery" "charger" I Supplementary Information · IMPORTANT! indicates very important information you need to know in order to use the camera correctly. · NOTE indicates information that is useful when operating the camera. 20 GETTING READY I File Memory The term "file memory" in this manual is a general term that refers to the location where your camera is currently storing the images you record. File memory can be any one of the following three locations. · The camera's built-in flash memory · An SD memory card loaded in the camera · A MultiMediaCard loaded in the camera For more information about how the camera stores images, see page 172. General Guide The following illustrations show the names of each component, button, and switch on the camera. Camera I Front 12 3 45 6 1 Shutter button 2 Power button 3 Flash 4 Microphone 5 Self-timer lamp 6 Viewfinder 7 Lens 7 21 GETTING READY I Back 89 :A B C D I Bottom J Stopper K Memory card slot L Battery compartment M Battery cover N Connector O Tripod screw hole * Use this hole when attaching to a tripod. 8 Viewfinder 9 Operation lamp 0 [ ] (PLAY mode) button ] (REC mode) button B [MENU] button C Zoom button D Strap ring E [SET] button F [ ][ ][ ][ ] G [DISP] button H Monitor Screen I Speaker A[ I J H GF E K ON M L 22 GETTING READY USB Cradle Simply placing your CASIO digital camera onto the USB cradle lets you perform the following tasks. · · · · Battery charging (page 31) Automatic transfer of images to a computer (page 160) Direct connection to a printer for printing (page 156) Viewing of images using the Photo Stand slideshow feature (page 119). I Back 6 [DC IN 5.3V] (AC adaptor connector) 6 7 7 [USB] (USB port) I Front 1 23 54 1 Camera connector 2 [USB] lamp 3 [USB] button 4 [CHARGE] lamp 5 [PHOTO] button 23 GETTING READY Monitor Screen Contents The monitor screen uses various indicators and icons to keep you informed of the camera's status. · Note that the example screens in this chapter are for illustrative purposes only. They do not exactly match the screen contents actually produced on the camera. I REC Modes 1 2 34 5 6 7 8 9 0 A B C E D 1 Flash mode indicator (page 59) None Auto Flash Off Flash On Red-eye reduction · If the camera detects that flash is required while auto flash is selected, the flash on indicator will appear when the shutter button is pressed half way. 1 2 3 White balance indicator 5 REC modes (page 48) (page 78) None Auto Daylight Cloudy Shade Fluorescent 1 Fluorescent 2 Tungsten Manual Snapshot BESTSHOT Movie Audio Snapshot Voice Recording G F 6 Memory capacity (pages 52, 91, 204) (Remaining number of storable images) Movie Recording: Remaining recording time 2 Focus mode indicator (page 68) None Auto Focus Macro Pan Focus Infinity Manual Focus x3 10s 2s 4 Self-timer (page 63) None 1-Image Self-timer 10 sec Self-timer 2 sec Triple self-timer 7 Image size (page 65) 2560 × 1920 pixels 2560 × 1712 (3:2) pixels 2048 × 1536 pixels 1600 × 1200 pixels 1280 × 960 pixels 640 × 480 pixels Movie Recording: Recording time 24 GETTING READY 8 Quality (page 66) FINE NORMAL ECONOMY B ISO sensitivity (page 100) I PLAY Mode 12 3 4 5 6 7 8 9 0 D (page 108) C Date and time (page 139) 9 Built-in memory selected for data storage. Memory card selected for data storage. D EV value (page 76) E Battery capacity (page 35) F E (page 146) 0 Shutter speed value (page 52) · An out of range aperture or shutter speed causes the corresponding monitor screen value to turn amber. F Histogram (page 97) G Focus frame (page 51) · Focusing complete: Green · Focusing failed: Red CBA 4 Image size (page 65) 2560 × 1920 pixels 2560 × 1712 (3:2) pixels 2048 × 1536 pixels 1600 × 1200 pixels 1280 × 960 pixels 640 × 480 pixels Movie Playback: Elapsed play time A Aperture value (page 52) NOTE 1 PLAY mode file type Snapshot Movie Audio Snapshot Voice Recording · Changing the setting of any one of the following functions will cause Icon Help (page 103) text to appear on the monitor screen. You can turn off Icon Help if you want (page 103). Flash mode, Focus mode, White balance, Self-timer, REC mode 2 Image protection indicator (page 128) 5 Quality (page 66) FINE NORMAL ECONOMY 3 Folder number/File number (page 127) Example : When a file named CIMG0023.JPG is stored in a folder named 100CASIO 100-0023 Folder name File name 6 Built-in memory selected for data storage. Memory card selected for data storage. (page 146) 25 GETTING READY 7 Shutter speed value 8 Aperture value 9 ISO sensitivity (page 100) B Flash mode indicator (page 59) Flash On Flash Off Red-eye reduction Changing the Contents of the Monitor Screen Each press of the [DISP] button changes the contents of the monitor screen as shown below. 0 Date and time (page 139) C REC modes (page 48) Snapshot BESTSHOT I REC Modes A White balance indicator (page 78) AWB Auto Daylight Cloudy Shade D Battery capacity (page 35) E Histogram (page 97) F EV value (page 76) Indicators on Histogram on 1 2 Fluorescent 1 Fluorescent 2 Tungsten Manual IMPORTANT! · Some information may not display properly if you display an image that was recorded using a different digital camera model. Monitor screen off Indicators off 26 GETTING READY I PLAY Mode IMPORTANT! · You cannot turn off the monitor screen in the following cases: In the PLAY mode, in the BESTSHOT mode, when not recording in the Movie mode. · Pressing [DISP] will not change monitor screen contents during movie recording, or during standby or recording of an audio snapshot. · Pressing [DISP] in the Voice Recording REC mode toggles the monitor screen on ("indicators on") and off. While a Voice Recording file is displayed in the PLAY mode, pressing [DISP] toggles between "indicators on" and "indicators off". · When playing back the contents of a Voice Recording file while "indicators off" is selected (Voice Recording file icon only on the monitor screen), the monitor screen will go black about two seconds after you press [SET] to start playback. The Voice Recording file icon (indicators off) will reappear after playback is complete. Indicators on Histogram/Details on Indicators off 27 GETTING READY Attaching the Strap Attach the strap to the strap ring as shown in the illustration. IMPORTANT! · Be sure to keep the strap around your wrist when using the camera to protect against accidentally dropping it. · The supplied strap is intended for use with this camera only. Do not use it for any other purpose. · Never swing the camera around by the strap. Strap ring 28 GETTING READY Power Requirements Your camera is powered by a rechargeable lithium ion battery (NP-40). 2. While pulling the stopper in the direction indicated by the arrow in the illustration, align the (­) mark on the battery with the (­) mark on the camera and slide the battery into the camera. Loading and Removing the Rechargeable Battery I To load the battery Stopper 1. Slide the battery cover in the direction indicated by the arrow, and then swing it open. (­) mark (­) marks NP-40 · Push the bottom of the battery, and make sure that the stopper securely locks the battery in place. 29 GETTING READY 3. Swing the battery cover closed, and then slide it in the direction indicated by the arrow. I To remove the battery 1. Open the battery cover. 2. Pull the stopper in the direction indicated by the arrow. · This will cause the battery to come part way out of the slot. Stopper IMPORTANT! · Use only the special NP-40 rechargeable lithium ion battery to power this camera. Use of any other type of battery is not supported. The battery is not charged when you purchase the camera. You need to charge the battery before using the camera for the first time (page 31). 3. Release the stopper and pull the battery from the camera. · Take care so you do not drop the battery. 30 GETTING READY To charge the battery NOTE · The bundled AC adaptor is designed for operation with any power supply in the range of 100V to 240V AC. Note, however, that the shape of the AC power cord plug varies according to country or geographic area. If you plan to use the AC adaptor in a geographic area where the power receptacle shape is different from that in your area, replace the AC power cord with one of the other ones that comes with the camera, or purchase a commercially available AC power cord that is compatible with the power outlets in that area. 1. Connect the bundled AC adaptor to the [DC IN 5.3V] connector of the USB cradle, and then plug it in to a household power outlet. · Note that the shape of the AC adaptor depends on the area where you purchased the camera. USB Cradle [DC IN 5.3V] AC Adaptor AC Adaptor USB Cradle [DC IN 5.3V] AC power cord 31 GETTING READY NOTE · The AC adaptor is designed for operation on power ranging from 100V AC to 240V AC. Note, however, that the shape of the power cord plug varies according to country or geographic area. It is up to you to find out if the shape of the AC adaptor power cord plug is compatible with local power outlets when traveling abroad. 4. After charging is complete, remove the camera from the USB cradle. IMPORTANT! · Use only the USB cradle (CA-24) that comes with the camera or the optionally available rapid charger (BC30L) to charge the special NP-40 rechargeable lithium ion battery. Never use any other charging device. · Use only the bundled AC adaptor. Never use any other type of AC adaptor. Do not use optionally available AD-C40, AD-C620 and AD-C630 AC adaptors with this camera. · Make sure that the camera connector of the USB cradle is securely inserted into the camera's connector as far as it will go. 2. Turn off the camera. 3. Set the camera onto the USB cradle. · Do not place the camera onto the USB cradle while it is turned on. · The [CHARGE] lamp on the USB cradle should turn red, indicating that charging has started. When charging is complete, the [CHARGE] lamp will turn green. [CHARGE] lamp · It takes about 190 minutes to achieve a full charge. Actual charging time depends on current battery capacity and charging conditions. 32 GETTING READY · The [CHARGE] lamp may remain amber colored and the charge operation may not start right away if you try to charge immediately after using the camera (which causes battery to become warm) or when it is too hot or too cold where you are performing the charge operation. If this happens, simply wait until the battery reaches normal temperature. The [CHARGE] lamp will turn red and charging will start when the battery temperature returns to the allowable charging temperature range. · If the [CHARGE] lamp starts flashing red, it means that an error occurs while charging. An error can be caused by any of the following: a problem with the USB cradle, a problem with the camera, or a problem with the battery or how it is loaded. Remove the camera from the USB cradle and see if it works normally. · The following are the only operations that can be performed while the camera is on the USB cradle: charging of the camera's battery, exchanging data with a computer over a USB connection, and Photo Stand operation. I If the camera does not work normally This can mean there is a problem with how the battery is loaded. Perform the following steps. 1. Remove the battery from the camera and check the battery contacts for dirt. If the contacts are dirty, wipe them clean with a dry cloth. 2. Check to make sure that the AC adaptor's power cord is connected securely to the power outlet and USB cradle. · If the same symptoms occur again when you place the camera on the USB cradle after taking the above steps, contact a CASIO authorized service center. 33 GETTING READY I Battery Life Guidelines The battery life guideline values given below indicate the amount of time under the conditions defined below the table, until power automatically turns off due to battery failure. They do not guarantee that the battery will provide the amount of service indicated. Low temperatures and continued use reduce battery life. Operation Number of Shots (CIPA Standard)*1 (Operating Time) Number of Shots, Continuous Recording*2 (Operating Time) Continuous Snapshot Playback*3 Continuous Voice Recording* 4 Supported Battery: NP-40 (Rated Capacitance: 1230mAh) Storage Medium: SD Memory Card *1 Number of Shots (CIPA Standard) · Temperature: 23°C (73°F) · Monitor Screen: On · Zoom operation between full wide to full telephoto every 30 seconds, during which two images are recorded, one image with flash; power turned off and back on every time 10 images are recorded. *2 Continuous Recording Conditions · Temperature: 23°C (73°F) · Monitor screen: On · Flash: Off · Image recorded every 12 seconds, alternating full wide-angle and full telephoto zoom *3 Continuous Snapshot Playback Conditions · Temperature: 23°C (73°F) · Scroll one image about every 10 seconds *4 Voice recording times are based on continuous recording. Apporoximate Battery Life 390 shots (195 minutes) 970 shots (190 minutes) 380 minutes 350 minutes 34 GETTING READY · The above values are based on a new battery starting from a full charge. Repeated charging shortens battery life. · Battery life is greatly affected by how much you use flash, zoom and other functions, and how long you leave power turned on. I Low Battery Indicator The following shows how the battery capacity indicator on the monitor screen changes as battery power is used. The indicator means that remaining battery power is low. Note that you will not be able to record images while the battery indicator is . Charge the battery immediately whenever either of these indicators appears. Battery Level Indicator High Low I Tips to Make the Battery Last Longer · If you do not need the flash while recording, select (flash off) for the flash mode. See page 59 for more information. · Enable the Auto Power Off and the Sleep features (page 41) to protect against wasting battery power when you forget to turn off the camera. · You can also conserve battery power by using the [DISP] button to turn off the monitor screen. 35 GETTING READY Power Supply Precautions Note the following precautions when handling or using the battery and the optional charger.