User manual CASIO EX-Z600

E Digital Camera EX-Z600 User's Guide Thank you for purchasing this CASIO product. · Before using it, be sure to read the precautions contained in this User's Guide. · Keep the User's Guide in a safe place for future reference. · For the most up-to-date information about this product, visit the official EXILIM Website at http://www.exilim.com/. K809FCM1DMX INTRODUCTION INTRODUCTION Unpacking Check to make sure that all of the items shown below are included with your camera. If something is missing, contact your dealer as soon as possible. Camera Rechargeable Lithium Ion Battery (NP-40) USB Cradle (CA-29) Strap CD-ROM USB Cable AV Cable Basic Reference · Note that the shape of the AC adaptor depends on the area where you purchased the camera. * The shape of the AC power cord plug varies according to country or geographic area. Special AC Adaptor (Inlet Type) (AD-C52G) AC Power Cord * Special AC Adaptor (Plug-in Type) (AD-C52J) 2 INTRODUCTION Contents 2 INTRODUCTION Unpacking .................................................................... 2 Features ....................................................................... 9 Precautions ................................................................ 12 Monitor Screen Contents ........................................... 26 REC Mode PLAY Mode Changing the Contents of the Monitor Screen 26 28 30 Attaching the Strap .................................................... 31 Power Requirements .................................................. 32 Loading the Rechargeable Battery To charge the battery To replace the battery Power Supply Precautions Turning the Camera On and Off Configuring Power Saving Settings 32 33 38 38 42 43 18 QUICK START GUIDE First, charge the battery! ............................................ 18 To configure display language and clock settings ..... 19 To record an image .................................................... 20 To view a recorded image .......................................... 21 To delete an image ..................................................... 21 Using the On-screen Menus ...................................... 45 Configuring Display Language and Clock Settings ... 47 To configure display language and clock settings 48 51 BASIC IMAGE RECORDING Aiming the Camera Recording an Image Optical Zoom Digital Zoom Flash Unit Status Changing the Flash Intensity Setting Using Flash Assist 51 52 58 60 64 65 65 Recording an Image ................................................... 51 22 GETTING READY About This Manual ..................................................... 22 General Guide ............................................................ 23 Camera USB Cradle 23 25 Using Zoom ................................................................ 58 Using the Flash .......................................................... 62 3 INTRODUCTION Using the Self-timer ................................................... 67 Specifying Image Size ............................................... 70 Specifying Image Quality ........................................... 71 Recording Images of Business Cards and Documents (Business Shot) ...................................... 95 Before recording with Business Shot To use Business Shot Before trying to restore an old photograph To restore an old photograph 74 77 78 78 79 80 Specifying Movie Image Quality Recording a Movie Adding Audio to a Snapshot Recording Your Voice 96 96 97 98 101 102 104 105 Restoring an Old Photograph .................................... 97 73 OTHER RECORDING FUNCTIONS Using Auto Focus Using the Macro Mode Using Pan Focus Using the Infinity Mode Using Manual Focus Using Focus Lock Selecting the Focus Mode ......................................... 73 Recording a Movie ................................................... 100 Recording Audio ....................................................... 104 Exposure Compensation (EV Shift) ........................... 81 Adjusting White Balance ............................................ 83 Configuring the White Balance Setting Manually Normal-speed continuous shutter High-speed continuous shutter Flash continuous shutter Displaying Sample Scenes Individually Creating Your Own BEST SHOT Setup To delete a BEST SHOT user setup 84 87 87 87 90 91 92 Using the Histogram ................................................. 107 REC Mode Camera Settings ................................... 110 Assigning Functions to the [ ] and [ ] Keys Turning the On-screen Grid On and Off Turning Image Review On and Off Using Icon Help Specifying Power On Default Settings Specifying ISO Sensitivity Selecting the Metering Mode Using the Filter Function Specifying Outline Sharpness Specifying Color Saturation Specifying Contrast Resetting the Camera 110 111 112 112 113 115 116 118 118 119 119 120 Using Continuous Shutter .......................................... 86 Using the BEST SHOT Mode .................................... 88 Reducing the Effects of Hand or Subject Movement ................................................................... 93 Shooting with High Sensitivity ................................... 94 4 INTRODUCTION 121 PLAYBACK Playing an Audio Snapshot 122 149 DELETING FILES Basic Playback Operation ........................................ 121 Zooming the Display Image ..................................... 123 Resizing an Image ................................................... 124 Cropping an Image ................................................... 125 Keystone Correction ................................................. 127 Using Color Restoration to Correct the Color of an Old Photograph ............................................... 128 Playing and Editing a Movie ..................................... 130 Playing a Movie Editing a Movie Capturing a Still Image from a Movie (MOTION PRINT) 130 131 135 Deleting a Single File ............................................... 149 Deleting All Files ...................................................... 150 151 FILE MANAGEMENT Memory Folders and Files To protect a single file To protect all files in memory To copy a file to the FAVORITE folder To display a file in the FAVORITE folder To delete a file from the FAVORITE folder To delete all files from the FAVORITE folder 151 152 153 153 155 156 156 Folders ...................................................................... 151 Protecting Files ........................................................ 152 Using the FAVORITE Folder .................................... 153 Displaying the 9-image View .................................... 136 Displaying the Calendar Screen .............................. 137 Playing a Slideshow ................................................. 138 Using the Photo Stand Feature 141 Rotating the Display Image ...................................... 142 Adding Audio to a Snapshot .................................... 143 To re-record audio 144 Playing Back a Voice Recording File ....................... 145 Displaying Camera Images on a TV Screen ........... 146 Selecting the Video Output System 148 5 INTRODUCTION 157 OTHER SETTINGS To configure sound settings To set the confirmation tone volume level To set the audio volume level for movie and audio snapshot playback 157 157 158 169 USING A MEMORY CARD To insert a memory card into the camera To replace the memory card Formatting a Memory Card To copy all the files in built-in memory to a memory card To copy a specific file from a memory card to built-in memory 170 171 172 Configuring Sound Settings ..................................... 157 Using a Memory Card .............................................. 170 Copying Files ............................................................ 173 174 175 Specifying an Image for the Startup Screen ........... 158 Specifying the File Name Serial Number Generation Method .................................................. 159 Setting the Clock ...................................................... 160 To select your Home Time zone To set the current time and date Changing the Date Format To display the World Time screen To configure World Time settings 160 161 161 162 162 176 PRINTING IMAGES To configure print settings for a single image To configure print settings for all images Date Printing 178 179 184 Using World Time ..................................................... 162 DPOF ........................................................................ 177 Editing the Date and Time of an Image ................... 163 Changing the Display Language .............................. 164 Changing the Brightness of the Monitor Screen ..... 165 Changing the USB Port Protocol ............................. 166 Configuring [ ] (REC) and [ ] (PLAY) Power On/Off Functions ........................................... 167 Formatting Built-in Memory ...................................... 168 Using PictBridge or USB DIRECT-PRINT ............... 180 PRINT Image Matching III ........................................... 185 Exif Print ................................................................... 185 6 INTRODUCTION 186 VIEWING IMAGES ON A COMPUTER 218 APPENDIX Using the Camera with a Windows Computer ......... 186 Using the Camera with a Macintosh Computer ....... 194 Using a Memory Card to Transfer Images to a Computer .................................................................. 198 Memory Data ............................................................ 199 DCF Protocol Memory Folder Structure Image Files Supported by the Camera 199 200 201 Menu Reference ....................................................... 218 Indicator Lamp Reference ........................................ 221 Troubleshooting Guide ............................................. 224 If you have problems installing the USB driver... Display Messages 229 230 Specifications ........................................................... 232 203 USING THE CAMERA WITH A COMPUTER Selecting the Software You Need Computer System Requirements Managing Images on a PC Retouching, Reorienting, and Printing a Snapshot Playing a Movie Viewing User Documentation (PDF Files) User Registration Exiting the Menu Application Selecting the Software You Need Computer System Requirements Managing Images on a Macintosh Playing a Movie Viewing User Documentation (PDF Files) To register as a camera user 203 205 206 209 211 212 212 212 213 214 215 216 216 217 Using the Camera with a Windows Computer ........ 203 Using the Camera with a Macintosh Computer ....... 213 7 INTRODUCTION IMPORTANT! · The contents of this manual are subject to change without notice. · CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss resulting from the use of this manual. · CASIO COMPUTER CO., LTD. assumes no responsibility for any loss or claims by third parties which may arise due to the use or malfunction of the EX-Z600. · CASIO COMPUTER CO., LTD. shall not be held liable for any damages or losses suffered by you or any third party due to the use of Photo Loader and/or Photohands. · CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss caused by deletion of data as a result of malfunction, repairs, or battery replacement. Be sure to back up all important data on other media to protect against its loss. · Note that the example screens and product illustrations shown in this User's Guide may differ somewhat by the screens and configuration of the actual camera. · The SD logo is a registered trademark. · Windows, Internet Explorer, Windows Media, and DirectX are registered trademarks of Microsoft Corporation. · Macintosh and QuickTime are trademarks of Apple Computer, Inc. · MultiMediaCard is a trademark of Infineon Technologies AG of Germany, and licensed to the MultiMediaCard Association (MMCA). · Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. · Other company, product and service names used herein may also be trademarks or service marks of others. · Photo Loader and Photohands are the property of CASIO COMPUTER CO., LTD. Except as stipulated above, all copyrights and other related rights to these applications revert to CASIO COMPUTER CO., LTD. 8 INTRODUCTION I LCD Panel The LCD panel is a product of the latest LCD manufacturing technology that provides a pixel yield of 99.99%. This means that less than 0.01% of the total pixels are defective (they do not turn on or always remain turned on). I Copyright Restrictions Except for the purposes of your own personal enjoyment, unauthorized copying of snapshot files, movie files, and audio files violates copyright laws and international contracts. Distribution to third parties of such files over the Internet without permission of the copyright holder, whether for profit or for free, violates copyright laws and international contracts. Features · 6.0 million effective pixels The CCD provides 6.18 million total pixels for images of outstanding resolution and detail. · 2.7-inch TFT color LCD monitor screen · 8.3MB built-in memory Images can be recorded without using a memory card. · Bundled with a USB Cradle The bundled USB cradle can be used to charge the camera's battery (page 33), to view images on a TV screen (page 146), and to transfer images to a computer (page 186). A Photo Stand feature lets you view images while the camera is on the cradle (page 141). · REC mode or PLAY mode power up (page 42) Press [ ] (REC) or [ ] (PLAY) to turn on the camera and enter the mode you want to use. · AF assist light (page 55) Improves auto focus accuracy when shooting under dim lighting. · 12X zoom (page 58) 3X optical zoom, 4X digital zoom · Flash Assist (page 65) This feature compensates when flash intensity is not strong enough, so images are better illuminated. 9 INTRODUCTION · Triple Self-timer (page 67) The self-timer can be set up to repeat three times, automatically. · Auto Macro (page 74) Auto Macro automatically switches to the macro mode when the distance between the camera and subject it shorter than the Auto Focus range. · Quick Shutter (page 75) When you press the shutter button all the way down without pausing, the camera immediately records the image without waiting for Auto Focus to be performed. This helps to avoid missing a special moment while you wait for the camera to Auto Focus. · Auto Focus Area Selection (page 76) When " Multi" is selected for the Auto Focus area, the camera takes simultaneous meter readings at nine different points and automatically selects the best one. · Three continuous shutter modes (page 86) In addition to normal-speed continuous shutter, you can also select high-speed continuous shutter or flash continuous shutter. · BEST SHOT (page 88) Simply select the sample scene that matches the type of image you are trying to record and the camera performs troublesome setups automatically for beautiful images every time. New BEST SHOT sample scenes include setups for High Sensitivity and Anti Shake. A [BS] (BEST SHOT) button provides direct access to BEST SHOT sample scenes. · Business Shot (page 95) Business Shot automatically corrects rectangular shapes when recording the image of a business card, document, whiteboard, or similar subjects from an angle. · Restoring an Old Photograph (page 97) You can use the procedure in this section to restore an old, faded photograph with the color provided by modern digital camera technology. · Movie recording with audio (page 100) VGA size, 30 fps, Motion JPEG format · Audio Snapshot mode (page 104) Use this mode to record snapshots that also include audio. · Voice Recording (page 105) Quick and easy recording of voice input. 10 INTRODUCTION · Real-time RGB histogram (page 107) An on-screen histogram lets you adjust exposure as you view the effect on overall image brightness, which makes shooting under difficult lighting conditions easier than ever before. · Keystone Correction (page 127) A simple operation corrects for keystoning, which occurs when you record the image of a blackboard or poster from an angle. · Color Correction (page 128) Simply record the image of an old photograph to restore its colors. · MOTION PRINT (page 135) Capture frames from a movie and create still images that are suitable for printing. · Calendar screen (page 137) A simple operation displays a full-month calendar on the camera's monitor screen. Each day of the full-month calendar shows a thumbnail of the first file recorded for that date, which helps to make searching for a particular file quicker and easier. · World Time (page 162) A simple operation sets the current time for your current location. You can select from among 162 cities in 32 time zones. · Support for SD memory cards and MMC (MultiMedia Cards) for memory expansion (page 169) · Digital Print Order Format (DPOF) (page 177) Images can be printed easily in the sequence you want using a DPOF compatible printer. DPOF can also be used when specifying images and quantities for printing by professional print services. · PictBridge and USB DIRECT-PRINT support (page 180) Connect directly to a PictBridge or USB DIRECT-PRINT compatible printer and you can print images without going through a computer. · PRINT Image Matching III Compatible (page 185) Images include PRINT Image Matching III data (mode setting and other camera setup information). A printer that supports PRINT Image Matching III reads this data and adjusts the printed image accordingly, so your images come out just the way you intended when you recorded them. · DCF Data Storage (page 199) DCF (Design rule for Camera File system) data storage protocol provides image compatibility between the digital camera and printers. 11 INTRODUCTION · Bundled with Photo Loader and Photohands (pages 206, 209, 215) Your camera comes bundled with Photo Loader, the popular application that automatically loads images from your camera to your PC. It also comes with Photohands, and application that makes image retouching quick and easy. Precautions I General Precautions Be sure to observe the following important precautions whenever using the EX-Z600. All references in this manual to "camera" refer to the CASIO EX-Z600 Digital Camera. · Never try to take pictures or use the built-in display while operating a motor vehicle or while walking. Doing so creates the risk of serious accident. · Never try to open the case of the camera or attempt your own repairs. High-voltage internal components create the risk of electric shock when exposed. Always leave maintenance and repair work up to a CASIO authorized service center. · Keep the small parts and accessories of this camera out of the reach of small children. If swallowed accidentally, contact your physician immediately. · Never fire the flash in the direction of a person operating a motor vehicle. Doing so can interfere with the driver's vision and create the risk of accident. 12 INTRODUCTION · Never fire the flash while it is too close to the subject's eyes. Intense light from the flash can cause eye damage if it is fired too close to the eyes. This is especially true with young children. When using the flash, the camera should be at least one meter (3.3´) from the eyes of the subject. · Keep the camera away from water and other liquids, and never let it get wet. Moisture creates the risk of fire and electric shock. Never use the camera outdoors in the rain or snow, at the seashore or beach, in the bathroom, etc. · Should foreign matter or water ever get into the camera, immediately turn it off. Next, remove the camera's battery and/or unplug the AC adaptor power cord from the power outlet, and contact your dealer or nearest CASIO authorized service center. Using the camera under these conditions creates the risk of fire and electric shock. · Should you ever notice smoke or a strange odor coming out of the camera, immediately turn it off. Next, taking care you do not burn your fingers, remove the camera's battery and/or unplug the AC adaptor power cord from the power outlet, and contact your dealer or nearest CASIO authorized service center. Using the camera under these conditions creates the risk of fire and electric shock. After making sure there is no more smoke coming from the camera, take it to your nearest CASIO authorized service center for repair. Never attempt your own maintenance. · Never use the AC adaptor to power any other device besides this camera. Never use any other AC adaptor besides the one that comes with this camera. · Never cover the AC adaptor with a quilt, blanket, or other cover while it is in use, and do not use it near a heater. · At least once a year, unplug the AC adaptor power cord from the power outlet and clean the area around the prongs of the plug. Dust build up around the prongs can create the risk of fire. · If the camera's case should ever become cracked due to dropping it or otherwise subjecting it to rough treatment, immediately turn it off. Next, remove the camera's battery and/or unplug the AC adaptor power cord from the power outlet, and contact your dealer or nearest CASIO authorized service center. · Never use the camera inside of an aircraft or in any other area where its use is prohibited. Doing so creates the risk of accident. · Physical damage and malfunction of this camera can cause the data stored in its memory to be deleted. Always keep backup copies of data by transferring them to personal computer memory. 13 INTRODUCTION · Never open the battery cover, disconnect the AC adaptor from the camera, or unplug the AC adaptor from the wall socket while an image is being recorded. Doing so will not only make storage of the current image impossible, it can also corrupt other image data already stored in file memory. I Test for proper operation before using the camera! Before using the camera to record important images, make sure you first record a number of test images and check the results to ensure that the camera is configured correctly and operating properly. 14 INTRODUCTION I Data Error Precautions · Your digital camera is manufactured using precision digital components. Any of the following creates the risk of corruption of data in file memory. -- Removing the battery or memory card, or setting the camera onto the USB cradle while the camera is performing a record or memory access operation -- Removing the battery, removing the memory card, or placing the camera onto the USB cradle while the operation lamp is still flashing green after you turn off the camera -- Disconnecting the USB cable, removing the camera from the USB cradle, or disconnecting the AC adaptor from the USB cradle while a data communication operation is being performed -- Low battery power -- Other abnormal operations Any of the above conditions can cause an error message to appear on the monitor screen (page 230). Follow the instructions provided by the message to eliminate the cause of the error. I Operating conditions · This camera is designed for use in temperatures ranging from 0°C to 40°C (32°F to 104°F). · Do not use or keep the camera in the following areas. -- In areas subject to direct sunlight -- In areas subject to high humidity or dust -- Near air conditioners, heaters, or other areas subject to temperature extremes -- Inside of a closed vehicle, especially one parked in the sun -- In areas subject to strong vibration 15 INTRODUCTION I Condensation · When you bring the camera indoors on a cold day or otherwise expose it to a sudden change of temperature, there is the possibility that condensation can form on the exterior or on interior components. Condensation can cause malfunction of the camera, so you should avoid exposing it to conditions that might cause condensation. · To keep condensation from forming, place the camera into a plastic bag before moving it into a location that is much warmer or colder than your current location. Leave it in the plastic bag until the air inside the bag has a chance to reach the same temperature as the new location. If condensation does form, remove the battery from the camera and leave the battery cover open for a few hours. I Power Supply · Use only the special NP-40 rechargeable lithium ion battery to power this camera. Use of any other type of battery is not supported. · This camera does not have a separate battery for the clock. The date and time will reset whenever the camera is not supplied power by the battery and/or the USB cradle for about 30 hours. Be sure to reconfigure these settings after power is interrupted (page 160). I Lens · Never apply too much force when cleaning the surface of the lens. Doing so can scratch the lens surface and cause malfunction. · You may sometimes notice some distortion in certain types of images, such as a slight bend in lines that should be straight. This is due to the characteristics of lens, and does not indicate malfunction of the camera. 16 INTRODUCTION I Caring for your camera · Fingerprints, dust, or any other soiling of the lens can interfere with proper image recording. Never touch the lens with your fingers. You can remove dust particles from the lens surface by using a lens blower to blow them off. Next, wipe the surface of the lens with a soft lens cloth. · Fingerprints, dirt, and other foreign matter on the flash can interfere with proper operation of the camera. Avoid touching the flash. If the flash becomes dirty, wipe it clean with a soft, dry cloth. · If the exterior of the camera needs cleaning, wipe it with a soft, dry cloth. I Other · The camera may become slightly warm during use. This does not indicate malfunction. 17 QUICK START GUIDE QUICK START GUIDE 2. Place the camera onto the USB cradle to charge the battery (page 33). · Note that the shape of the AC adaptor depends on the area where you purchased the camera. · It takes about 180 minutes to achieve a full charge. First, charge the battery! 1. Load the battery into the camera (page 32). 1 1 Inlet Type 2 Stopper 2 1 Plug-in Type 3 [CHARGE] lamp Charging: Lights red Charging Complete: Lights green 18 QUICK START GUIDE To configure display language and clock settings · Be sure to configure the following settings before using the camera to record images. See page 47 for details. 1. Press the power button to turn on the camera. 2. Use [ ], [ ], [ ], and [ ] to select the language you want. 1 3. Press [SET] to register the language setting. 4. Use [ ], [ ], [ ], and [ ] to select the geographical area you want, and then press [SET]. 5. Use [ ] and [ ] to select the city you want, and then press [SET]. 2, 3, 4, 5, 6, 7, 8, 9 DISP 6. Use [ ] and [ ] to select the summer time (DST) setting you want, and then press [SET]. [] [] [] SET 7. Use [ ] and [ ] to select the date format setting you [] [SET] want, and then press [SET]. 8. Set the date and the time. 9. Press [SET] to register the clock settings and exit the setting screen. 19 QUICK START GUIDE To record an image See page 51 for details. Auto recording icon 1. Press [ 2 3 1 ] (REC). · This enters the REC (recording) mode. 2. Point the camera at the subject, use the monitor screen to compose the image, and then press the shutter button half way. · When the camera finishes its Auto Focus operation, the focus frame will turn green and the operation lamp lights green. Focus frame 3. Holding the camera still, gently press the shutter button all the way down. Operation lamp Before using a commercially available memory card, be sure to first format it using the camera's formatting procedure. For details about formatting a memory card, see page 172. 20 QUICK START GUIDE To view a recorded image See page 121 for details. To delete an image See page 149 for details. 1 1 2 2, 3, 4, 5 1. Press [ ] (PLAY). 1. Press [ ] (PLAY). ). · This enters the PLAY (playback) mode. 2. Press [ ] ( delete. 2. Use [ ] and [ ] to scroll through the images. 3. Use [ ] and [ ] to display the image you want to 4. Use [ ] and [ ] to select "Delete". · To exit the image delete operation without deleting anything, select "Cancel". 5. Press [SET] to delete the image. 21 GETTING READY GETTING READY This term as used in this manual: "digital noise" Means this: Tiny flecks or "snow" in a recorded image or on the monitor screen, which makes the image look grainy. This section contains information about things you need to know about and do before trying to use the camera. About This Manual This section contains information about the conventions used in this manual. I Button Operations Button operations are indicated by the button name inside of brackets ([ ]). I Terminology The following table defines the terminology used in this manual. This term as used in this manual: "camera" "file memory" Means this: The CASIO EX-Z600 Digital Camera The location where the camera is currently storing images you record (page 52) The NP-40 Rechargeable Lithium Ion Battery The optionally available CASIO BC-30L charger I On-screen Text On-screen text is always enclosed by double quotation marks (" "). I Supplementary Information IMPORTANT! indicates very important information you need to know in order to use the camera correctly. · NOTE indicates information that is useful when operating the camera. · "battery" "charger" 22 GETTING READY I File Memory The term "file memory" in this manual is a general term that refers to the location where your camera is currently storing the images you record. File memory can be any one of the following three locations. · The camera's built-in memory · An SD memory card loaded in the camera · A MultiMediaCard loaded in the camera For more information about how the camera stores images, see page 199. General Guide The following illustrations show the names of each component, button, and switch on the camera. Camera I Front 23 45 1 1 Zoom controller 2 Shutter button 3 Power button 4 Microphone 5 AF assist light/ self-timer lamp 7 6 6 Lens 7 Flash 23 GETTING READY I Back 89 0 I Bottom G Stopper H Memory card slot I Battery compartment J Battery cover K Tripod screw hole * Use this hole when attaching to a tripod. DISP A B [] [] [] [] [SET] L Connector M Speaker G SET F C E D 8 Operation lamp 9 [ ] (PLAY mode) button 0 [ ] (REC mode) button A [BS] (BEST SHOT) button B Strap ring C [ ][ ][ ][ ] D [SET] button E [MENU] button F Monitor Screen M LK J I H 24 GETTING READY USB Cradle Simply placing your CASIO digital camera onto the USB cradle lets you perform the following tasks. · Battery charging (page 33) · Viewing of images using the Photo Stand slideshow feature (page 141). · TV connectability for viewing of images on a television screen (page 146). · Direct connection to a printer for printing (page 180) · Automatic transfer of images to a computer (page 186) IMPORTANT! · Use only the USB cradle (CA-29) that comes with the camera. Other USB cradles are not supported. I Front 1 1 Camera connector 2 [USB] lamp 3 [USB] button 4 [PHOTO] button 5 [CHARGE] lamp 5 43 2 I Back 6 [DC IN 5.3V] (AC adaptor connector) 7 [AV OUT] 87 8[ 6 (AV output port) ] (USB port) 25 GETTING READY Monitor Screen Contents The monitor screen uses various indicators and icons to keep you informed of the camera's status. · Note that the example screens in this chapter are for illustrative purposes only. They do not exactly match the screen contents actually produced on the camera. REC Mode I Screen Indicators 1 2 3 4 567 I H G 89 0 A B C D F E · 1 Flash mode indicator (page 62) Auto Flash Flash Off Flash On Soft Flash Red-eye reduction appears momentarily when you select Auto Flash as the flash mode, and then disappears. · If the camera detects that flash is required while auto flash is selected, the flash on indicator will appear when the shutter button is pressed half way. · When you select Auto Focus with Key Customize (page 110), appears only briefly, and then disappears from the display. 4 Continuous Shutter mode (page 86) None Single shot Normal-speed Continuous Shutter High-speed Continuous Shutter Flash Continuous Shutter 3 White balance indicator (page 83) AWB Auto Daylight Cloudy Shade Day White Daylight Tungsten Manual · When you select Auto with Key Customize (page 110), AWB appears only briefly, and then disappears from the display. None 10s 2s 5 Self-timer (page 67) 1-Image Self-timer 10 sec Self-timer 2 sec Triple self-timer x3 2 Focus mode indicator (page 73) Auto Focus Macro Pan Focus Infinity Manual Focus 6 Recording types Auto recording BEST SHOT Movie Voice Recording 26 GETTING READY 7 Metering mode indicator (page 116) None Multi Center Weighted Spot A ISO sensitivity (page 115) NOTE · An out of range aperture, shutter speed, or ISO sensitivity setting causes the corresponding monitor screen value to turn amber. · Changing the setting of any one of the following functions will cause Icon Help (page 112) text to appear on the monitor screen. You can turn off Icon Help if you want. Flash mode, Focus mode, White balance, Self-timer, Recording type, EV shift B Aperture value (page 54) C Shutter speed value (page 54) 8 · Snapshots: Image size (page 70) D Date and time (page 160) 9 · Snapshots: Memory capacity (pages 54, 232) · Movies: Remaining recording time (page 102) E EV value (page 81) F Battery capacity (page 37) 0 · Snapshots: Image quality (page 71) F : Fine N : Normal E : Economy · Movies: Image quality (page 101) HQ : High Quality NORMAL : Normal LP : Long Play G Histogram (page 107) H Anti Shake indicator (page 93) I Focus frame (page 53) · Focusing complete: Green · Focusing failed: Red 27 GETTING READY J PLAY Mode 12 3 4 5 6 7 8 9 F E K D CB A 0 J Digital zoom indicator (page 60) K Zoom indicator (page 60) · Left side indicates optical zoom. · Right side indicates digital zoom. 1 PLAY mode file type Snapshot Movie Audio Snapshot Voice Recording 3 Folder name/File name (page 151) Example : When a file named CIMG0023.JPG is stored in a folder named 100CASIO 100-0023 Folder name File name 2 Image protection indicator (page 152) 4 · Snapshots: Image quality (page 71) F : Fine N : Normal E : Economy · Movies: Recording time (page 102) 28 GETTING READY 5 · Snapshots: Image Size (page 70) · Movies: Image quality (page 101) HQ : High Quality NORMAL : Normal LP : Long Play A White balance indicator (page 83) AWB Auto Daylight Cloudy Shade Day White Daylight Tungsten Manual IMPORTANT! · Some information may not display properly if you display an image that was recorded using a different digital camera model. 6 ISO sensitivity (page 115) 7 Aperture value (page 54) 8 Shutter speed value (page 54) 9 Date and time (page 160) B Flash mode indicator (page 62) Flash On Flash Off Soft Flash Red-eye reduction 0 Metering mode indicator (page 116) Multi Center Weighted Spot C Recording types Auto recording BEST SHOT D Battery capacity (page 37) E Histogram (page 107) F EV value (page 81) 29 GETTING READY Changing the Contents of the Monitor Screen Each press of [ ] (DISP) changes the contents of the monitor screen as shown below. I PLAY Mode I REC Mode Indicators on Histogram/Details on Indicators on Histogram on Indicators off Indicators off 30 GETTING READY IMPORTANT! · Pressing [ ] (DISP) will not change monitor screen contents during standby or recording of an audio snapshot. · You can use [ ] (DISP) to turn off the monitor screen only when voice recording in the REC mode. You cannot turn off the monitor screen for any other recording function. · Pressing [ ] (DISP) in the Voice Recording REC mode toggles the monitor screen on ("indicators on") and off. While a Voice Recording file is displayed in the PLAY mode, pressing [ ] (DISP) toggles between "indicators on" and "indicators off". · When playing back the content of a Voice Recording file while "indicators off" is selected (Voice Recording file icon only on the monitor screen), the monitor screen will go black about two seconds after you press [SET] to start playback. The Voice Recording file icon (indicators off) will reappear after playback is complete. Attaching the Strap Attach the strap to the strap ring as shown in the illustration. Strap ring IMPORTANT! · Be sure to keep the strap around your wrist when using the camera to protect against accidentally dropping it. · The supplied strap is intended for use with this camera only. Do not use it for any other purpose. · Never swing the camera around by the strap. 31 GETTING READY Power Requirements Your camera is powered by a rechargeable lithium ion battery (NP-40). 2. While pulling the stopper in the direction indicated by the arrow in the illustration, align the arrow mark on the battery with the arrow mark on the camera and slide the battery into the camera. Loading the Rechargeable Battery 1. Slide the battery cover in the direction indicated by the arrow, and then swing it open. Stopper Arrow marks Camera: Battery: NP-40 · Push the bottom of the battery, and make sure that the stopper securely locks the battery in place. 32 GETTING READY 3. Swing the battery cover closed, and then slide it in the direction indicated by the arrow. To charge the battery 1. Connect the bundled AC adaptor to the [DC IN 5.3V] connector of the USB cradle, and then plug it in to a household power outlet. · Note the shape of the AC adaptor depends on the area where you purchased the camera. [DC IN 5.3V] USB Cradle IMPORTANT! · Use only the special NP-40 rechargeable lithium ion battery to power this camera. Use of any other type of battery is not supported. The battery is not fully charged when you use the camera for the first time after purchasing it. You need to charge the battery before using the camera for the first time. AC power cord AC Adaptor 33 GETTING READY NOTE · The bundled AC adaptor is designed for operation with any power supply in the range of 100V to 240V AC. Note, however, that the shape of the AC power cord plug varies according to country or geographic area. If you plan to use the AC adaptor in a geographic area where the power receptacle shape is different from that in your area, replace the AC power cord with one of the other ones that comes with the camera, or purchase a commercially available AC power cord that is compatible with the power outlets in that area. · Never use the AC adaptor with a voltage converter. NOTE · The AC adaptor is designed for operation on power ranging from 100V AC to 240V AC. Note, however, that the shape of the power cord plug varies according to country or geographic area. It is up to you to find out if the shape of the AC adaptor power cord plug is compatible with local power outlets when traveling abroad. · Never use the AC adaptor with a voltage converter. 2. Turn off the camera. 3. With the camera positioned with the monitor screen facing forward as shown in the illustration, place it onto the USB cradle. · Do not place the camera onto the USB cradle while it is turned on. [CHARGE] lamp USB Cradle AC Adaptor [DC IN 5.3V] 34 GETTING READY · The [CHARGE] lamp on the USB cradle should turn red, indicating that charging has started. When charging is complete, the [CHARGE] lamp will turn green. · It takes about 180 minutes to achieve a full charge. Actual charging time depends on current battery capacity and charging conditions. IMPORTANT! · Use only the USB cradle (CA-29) that comes with the camera or the optionally available charger (BC-30L) to charge the special NP-40 rechargeable lithium ion battery. Never use any other charging device. · Use only the bundled AC adaptor. Never use any other type of AC adaptor. Do not use optionally available AD-C30, AD-C40, AD-C620 and AD-C630 AC adaptors with this camera. · Make sure that the camera connector of the USB cradle is securely inserted into the camera's connector as far as it will go. · The [CHARGE] lamp may remain amber colored and the charge operation may not start right away if you try to charge immediately after using the camera (which causes battery to become warm) or when it is too hot or too cold where you are performing the charge operation. If this happens, simply wait until the battery reaches normal temperature. The [CHARGE] lamp will turn red and charging will start when the battery temperature returns to the allowable charging temperature range. 4. After charging is complete, remove the camera from the USB cradle. 35 GETTING READY · If the [CHARGE] lamp starts flashing red, it means that an error occurs while charging. An error can be caused by any of the following: a problem with the USB cradle, a problem with the camera, or a problem with the battery or how it is loaded. Remove the camera from the USB cradle and see if it works normally. · The only operations that can be performed while the camera is on the USB cradle are: battery charging, Photo Stand, image output to a TV, and USB data communication. I If the camera does not work normally This can mean there is a problem with how the battery is loaded. Perform the following steps. 1. Remove the battery from the camera and check the battery contacts for dirt. If the contacts are dirty, wipe them clean with a dry cloth. 2. Check to make sure that the AC adaptor's power cord is connected securely to the power outlet and USB cradle. · If the same symptoms occur again when you place the camera on the USB cradle after taking the above steps, contact a CASIO authorized service center. 36 GETTING READY I Low Battery Indicator The following shows how the battery capacity indicator on the monitor screen changes as battery power is used. The indicator means that remaining battery power is low. Note that you will not be able to record images while the battery indicator is . Charge the battery immediately whenever either of these indicators appears. Battery Level Indicator High Low I Tips to Make the Battery Last Longer · If you do not need the flash while recording, select (flash off) for the flash mode. See page 62 for more information. · Enable the Auto Power Off and the Sleep features (page 43) to protect against wasting battery power when you forget to turn off the camera. · Use the "0" monitor screen brightness setting to consume less power (page 165). IMPORTANT! · Due to differences in the power requirements of each mode, the battery indicator may show a lower level in the PLAY mode than what it shows in the REC mode. This is normal, and does not indicate malfunction. 37 GETTING READY To replace the battery