AUTOMATIC COMMUTATOR-2 INPUTS WITH SCART SOCKETS COMline 2A+ - Automatically connects (no need of manual intervention) two video or RGB sources to your TV set. - Allows you to record one or the other source on your VCR with automatic connection. - 100% compatible 16/9. 1 - INSTALLATION - Connect the "OUTPUT (TV)" scart socket of your COMline 2A+ to your TV set with the scart cable included. Using suitable cables (21-PIN scart/scart cable): connect to the "VCR / C+" socket the source N°1 (VCR, DVB-T receiver, digital or analog satellite, DVD...). - Connect to the "AUX (TNT, DVD, SAT...)" socket the source N°2 (DVB-T receiver, digital or analog satellite, DVD, VCR). - Plug the 12V power adaptor into the front of the COMline 2A+. 2 - HOW TO USE - Switch ON the video source which you want to watch on your television set. COMline 2A+ will automatically establish a connection towards this one. - When you switch OFF your source N°1, the television set will show your source N°2 automatically and vice versa. - If your video device does not have slow switching, please connect it in priority on the "VCR / C+" socket. - "Hi-Fi OUTPUT": You can connect your video appliances to your Hi-Fi system with a "3.5 Jack mm/RCA" cable (not supplied). - To record on your VCR the appliance connected to "AUX (TNT, DVD, SAT...)", just switch it on. It will be automatically routed to the VCR. - To record the TV (connected on "OUTPUT (TV)") just switch off the appliance connected to "AUX (TNT, DVD, SAT...)". 3- TECHNICAL FEATURES Adaptator : Power adaptator 230V/12V-50Hz. Diaphoty : >50 dB Dimming of the RGB signals: < 0,5 dB 2 RGB fully-wired scart connectors Commutation of all video, audio, RGB, SC, between both scart sockets. COMPAGNIE GENERALE DE VIDEOTECHNIQUE OSTWALD - www.cgv.fr ...