Model #00887 Digital Thermometer,Clock, and Hygrometer THERMOMETER Normal display shows indoor and outdoor temperature in 1/10 degree increments. Clock Press Temp. Clock Button Indoor Temp Outdoor Temp Indoor Relative Humidity DoubleSided Tape Holes on bracket for screws Easy bracket wall mounting with: · Double-sided tape or · Screws Outdoor Temp Indoor Relative Humidity INSTALLATION INSTRUCTIONS: THE UNIT: Choose a suitable space away from direct sunlight, heating and air conditioning vents. Option 1: Install wall mount bracket with enclosed two screws or double sided tape. Hang unit on mounted bracket. Option 2: Use flip-down stand to display on flat surface. THE OUTSIDE SENSOR: Make sure that the remote sensor wire will reach outside before mounting the unit. Remove the protective paper from sensor, press firmly in position free from direct sunlight and rain. To Read Indoor MIN/MAX Temperature: Press TEMP MIN/MAX MEMORY button once Indoor MAX Temp Indoor MIN Temp Indoor Relative Humidity PressCLEAR butt on to clear indoor MIN/MAX Temperature memory r ecord Press TEMP MIN/MAX button 3 times to return to current temperature readout. To Read Outdoor MIN/MAX Temperature: Press TEMP MIN/MAX button two times Outdoor MAX Temp OUT Battery Replacement: - 1 'AAA' battery - Insert battery as dir ections indicate Folding stand for flat display Outdoor MIN Temp Indoor Relative Humidity PressCLEAR button to clear outdoor MIN/MAX Temperature memory r ecord OUT Operating Instructions: 1. Slide the 12 HR/24 HR switch to choose your desired format. In 12 HR format, an "AM" or "PM" sign will appear indicating AM or PM hours. 2. Slide °F/°C switch to select °F or °C readout. To Set the Clock: 1. On the back, slide the CLOCK SET switch to the CLOCK SET position. 2. Press and release the HR button to set the current hour. Press and hold the HR button for faster setting. 3. Press and release MIN button to set minutes. 4. Slide the CLOCK SET switch to the LOCK position. HYGROMETER: To Read Indoor MIN/MAX Relative Humidity: Press HUMIDITY MIN/MAX button once for maximum relative humidity Indoor MAX Humidity PressCLEAR butt on to clear MAX Humidity memory Press HUMIDITY MIN/MAX button two times for minimum relative humidity LIMITED WARRANTY Any Chaney instrument which proves to be defective in material or workmanship within one year of original purchase will be repaired or replaced. This warranty does not cover damage in shipment or failure caused by tampering, carelessness or abuse. LAKE GENEVA, WI 53147 www.chaneyinstrument.com Indoor MIN Humidity PressCLEAR butt on to clear MIN Humidity memory ...