CITIZEN AUTOMATIC DAY / DATE · INSTRUCTION MANUAL Calibers No. 8200, 8210, 66 69 CTZ-P6911 STARTING THE WATCH This watch has a high self-winding mechanism that winds the mainspring with a light motion of your wrist. However, to obtain best performance, it is recommended that the crown be wound manually 5 to 10 times at the normal position 0. If the watch does not start yet, wind the crown 5 to 10 times further or give a shock slightly to the watch. How to look at the type Type No. of watch is carved on a back cover as shown in the chart below. Setting instruction [Setting The Date] (1) The date changes instantly when the crown is pulled out from position 1 to 2 . Set to required date by performing a reciprocation motion between 1 and 2 positions. [Setting The Time] (1) Pull out crown to position 1 and turn to set hands to correct time. For calendar-equipped watches, do not confuse AM and PM settings. (2) When crown is returned to position 0 , watch will begin to keep accurate time. Note: Avoid performing the calendar quick setting operation between the below listed times: For watches equipped with date display 9:00 PM 10:00 AM For watches equipped with both date and day display 9:00 PM 4:30 AM If the calendar quick setting operations is performed between these times the calendar could be incorrectly set to the date of the previous day. After setting watch hands during these times, set time, day and date accordingly. Special Handling Instruction 1. Water-resistant Check the chart to determine the water-resistant properties of this watch. · Always set the crown in the normal position. · Do not operate the crown when the watch is wet. · Tighten screw-lock crown completely. (Screwlock type crown) 2. Avoid extreme temperature 3. Avoid strong shocks 4. Avoid strong magnetic fields 5. Avoid chemicals and gases Avoid wearing your watch in the presence of chemicals and gases. If mercury or any chemical (such as fuel gasoline, thinner, alcohol, spray liquid of cosmetics or the like), attaches, discoloration, deterioration or damage to case, band or other components may occur. 6. Keep the watch clean It may become difficult to pull out the crown due to dirt and dust getting caught between the crown and the case when the watch is worn for long periods of time. To prevent it, turn the crown freely back and forth occasionally, any dirt left on the case or band may cause skin rash. A watchband will easily become soiled with dust and perspiration because it is in direct contact with the skin. Even a stainless steel or gold plated band may begin to corrode if it has not been cleaned for a long period of time. 7. Periodic inspection Getting your watch checked once every year or two is recommended to endure long use and trouble-free operation. In the case of screw lock-type crown, release the crown screw lock at first. [Setting The Time] (1) Pull out crown to position 1 and turn to set hands to correct time. · If watch is calendar equipped, pull out crown to position 2 . · For calendar-equipped watches, do not confuse AM or PM settings. (2) When crown is returned to position 0 , watch will begin to keep accurate time. [Setting The Calendar} (1) Pull out crown to position 1 . (2) Set date by turning crown to the left. (3) Set day by turning crown to the right. · For watches equipped with date display only, date is set by turning crown to the right. (4) Return crown to 0 position. [Setting The Day] (1) Set the day by performing a reciprocating motion between 9:00PM and 4:30AM with the crown at 1 position. Indication Protect water for splashed (rain/face washing) Classification Specifications Dial Case Back Water-related Use Protect water Protect water for swimming for water sports and washing work and skin diving (car/kitchen) use Protect water for scuba diving use No water resistance Water resistance for daily life Upgraded everyday-use waterresistant watch Upgraded everyday-use waterresistant watch 3 bar No indication Water Resistant water resistance 5 bar Water Resistant Water Resistant water resistance 5 bar or no 5 bar indication 10 bar/20 bar Water Resistant Water Resistant water resistance 10 bar/20 bar 10 bar/20 bar or no indication NO OK OK NO NO OK NO NO NO NO NO NO OK OK OK NO Specification Caliber No. 8200, 8210 1. Oscillation of balance 21,600 oscillations/hour (6 beats) 2. Additional functions An automatic winding mechanism Date (with quicksetting mechanism) Day of week (with quicksetting mechanism) / 8200 only Day indication in two languages / 8200 only