User manual CLARION DB415

Owner's manual Mode d'emploi Manual de instrucciones 1. PRECAUTIONS 1. When the inside of the car is very cold and the player is used soon after switching on the heater, moisture may form on the disc or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc, wipe it off with a soft cloth. If moisture forms on the optical parts of the player, do not use the player for about one hour and the condensation will disappear naturally to allow normal operation. 2. Driving on extremely bumpy roads which cause severe vibration may cause the sound to skip. 3. This unit uses a precision mechanism. Even in the event that trouble arises, never open the case, disassemble the unit, or lubricate the rotating parts. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to consult the dealer or an experienced radio/TV technician for help. s Contents English 1. PRECAUTIONS...........................................................2 2. CONTROLS.................................................................3 3. BUTTON TERMINOLOGY ..........................................4 4. FEATURES..................................................................5 5. HANDLING COMPACT DISCS...................................6 6. DCP .............................................................................7 7. REMOTE CONTROLL ................................................8 8. OPERATION..............................................................10 9. TROUBLESHOOTING ..............................................14 10.ERROR DISPLAYS ...................................................15 11.SPECIFICATIONS.....................................................16 English s Table des matières Français 1. PRÉCAUTIONS.........................................................17 2. COMMANDES.............................................................3 3. NOMENCLATURE DES TOUCHES .........................18 4. CARACTÉRISTIQUES..............................................19 5. MANIPULATION DES DISQUES COMPACTS ........20 6. CLAVIER DE COMMANDE AMOVIBLE (DCP) .......21 7. TÉLÉCOMMANDE....................................................22 8. FONCTIONNEMENT.................................................24 9. DÉPISTAGE DES PANNES ......................................29 10.AFFICHAGE DES ERREURS...................................30 11.SPÉCIFICATIONS.....................................................31 DB415 AM/FM CD PLAYER · RADIO AM/FM-LECTEUR CD · RADIO AM/FM Y REPRODUCTOR CD CAUTION USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL. MODEL DRX5675 12V GROUND AM 530-1710kHz/FM 87.9-107.9MHz THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. s Índice Español 1. PRECAUCIONES......................................................33 2. CONTROLES ..............................................................3 3. NOMENCLATURA DE LOS BOTONES ...................34 4. CARACTERÍSTICAS ................................................35 5. MANEJO DE LOS DISCOS COMPACTOS ..............36 6. PANEL DE CONTROL DESMONTABLE (DCP) ......37 7. CONTROLADOR REMOTO......................................38 8. OPERACIÓN .............................................................40 9. SOLUCIÓN DE PROBLEMAS..................................45 10.INDICACIONES DE ERROR ....................................46 11.ESPECIFICACIONES ...............................................47 THIS PRODUCTION COMPLIES WITH DHHS RULES 21 CFR SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURE. CLARION CO.,LTD. 50 KAMITODA,TODA-SHI,SAITAMA-KEN,JAPAN 051 722 877 Bottom View of Source Unit MANUFACTURED: SERIAL No. PE-2310B 286- 324-00 Clarion Co.,Ltd. MADE IN CHINA INFORMATION FOR USERS: CHANGES OR MODIFICATIONS TO THIS PRODUCT WILL VOID THE WARRANTY AND WILL VIOLATE FCC APPROVAL. Clarion Co., Ltd. 2001/1 (D· C) All Rights Reserved. Copyright © 2001: Clarion Co., Ltd. Printed in China / Imprimé en Chine / Impreso en China PE-2389B 280-7597-00 Be sure to unfold and read the next page. Veuillez déployer et vous référer à la page suivante. Cerciórese de desplegar y de leer la página siguiente. DB415 2 2. CONTROLS / LES COMMANDES / CONTROLES Main unit / Appareil principal / Unidad principal 3. BUTTON TERMINOLOGY Note: · Be sure to read this chapter referring to the front diagrams of chapter 2. CONTROLS on page 3 (unfold). 12 3 4 1 Open Button 2 A-M (Audio Mode) Button LD (Loudness) Button 3 POWER Button FNC (Function) Button English English $# @ !0 9 87 6 5 With the FLIP DOWN PANEL opened / Ouvrez le PANNEAU RABATTABLE / Apertura del PANEL ABATIBLE 4 ISR (Instant Station Recall) Button 5 DISP (Display) Button 6 RDM (Random) Button 7 RPT (Repeat) Button 8 SCN (Scan) Button PS/AS (Preset Scan/Auto Store) Button 9 Preset Buttons (1 to 6) Français Español 3 % ¥ Direct Buttons (1 to 6) 0 Z-EHCR (Z-enhancer) Button ! BND (Band) Button TOP (Top Play) Button @ SRCH (Search) Left and Right ( # Rotary Knob $ Play/Pause ( MUTE Button ) Button and ) Buttons Display / Afficheur / Visualizador % Eject ( ) Button ¥ CD insertion slot Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter. Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre. Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas. DB415 4 DB415 DB415 49 4. FEATURES s Rotary Encoder Volume Control s DIN Chassis with Detachable Control Panel s Z-Enhancer with 3 Mode Sound Selector s ® FM Reception System s AM/FM Bands-1 AM, 3 FM/18 FM/6 AM Touchbutton Memory s 8-Times Oversampling Digital Filter and Dual 1-Bit D/A Converters s Zero-Bit Detector Mute Circuit s Repeat/Random Play/Intro Music Scan s Multi-Color LC Display s 4-Channel RCA Line Level Output with Fader Control s 180 W (45 W × 4) Maximum Power Output s IR-Remote Control Capability E glis Flip Down Panel This unit uses a flip-down structure that makes possible large-size displays. CAUTION When opening and closing the FLIP DOWN PANEL, be careful not to catch your fingers. They could be injured. 1. Always use this unit with the FLIP DOWN PANEL closed. 2. Do not force operations or use this device abnormally when opening or closing the FLIP DOWN PANEL. 3. Do not use the FLIP DOWN PANEL as a tray to place objects on when it is open. 4. When closing the FLIP DOWN PANEL, do not press the Open button 1. 5. Strong impacts to the operating or display section can cause damage or deformation. 6. If the flip down panel does not open fully, gently open it with your hand. DB415 5 5. HANDLING COMPACT DISCS This unit has been designed specifically for playback of compact discs bearing the mark. No other discs can be played. To remove the compact disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges. Removing the disc Proper way to hold the compact disc Note on Compact Discs Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen. No English Always handle the compact disc by the edges. Never touch the surface. To remove fingermarks and dust, use a soft cloth, and wipe in a straight line from the center of the compact disc to the circumference. No Do not use any solvents such as commercially available cleaners, anti-static spray, or thinner to clean compact discs. No Do not use compact discs that have large scratches, are misshapen, or cracked, etc. Use of such discs will cause misoperation or damage. No New discs may have some roughness around the edges. The unit may not work or the sound may skip if such discs are used. Use a ball-point pen, etc. to remove roughness from the edge of the disc. Ball-point pen Roughness Do not expose compact discs to direct sunlight or any heat source. No Note: · Do not use commercially available CD protection sheets or discs equipped with stabilizers, etc. These may get caught in the internal mechanism and damage the disc. 6 DB415 6. DCP The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (DETACHABLE CONTROL PANEL) case to prevent scratches. We recommend taking the DCP with you when leaving the car. Removing the DCP 1. Hold down POWER button 3 for 1 second or longer to switch off the power. Attaching the DCP 1. Insert the right side of the DCP into the main unit. 2. Insert the left side of the DCP into the main unit. E glis 2. DCP 2. Deeply push in Open button 1 to unlock the FLIP DOWN PANEL. If the FLIP DOWN PANEL does not open fully, gently open it with your hand. DCP Release button 1 1. CAUTION · The DCP can easily be damaged by shocks. After removing it, be careful not to drop it or subject it to strong shocks. · If the FLIP DOWN PANEL is kept open, the DCP may drop due to vibration of the car. This results in damage to the DCP. So close the FLIP DOWN PANEL or remove the DCP to store into the case. · The connector connecting the unit and the DCP is an extremely important part. Be careful not to damage it by pressing on it with fingernails, screwdrivers, etc. 3. Pull the DCP toward you and remove it. DCP Note: · If the DCP is dirty, wipe off the dirt with a soft, dry cloth only. 4. Close the HOLD FLAP. HOLD FLAP CAUTION Be sure to close the HOLD FLAP for safety when removing the DCP. DB415 7 7. REMOTE CONTROL If you buy the RCB-130, sold separately, you can enjoy the use of the remote control function. Receiver for remote control unit Operating range: 30° in all directions Remote Control Unit Signal transmitter English & ( ¡ ) * £ TM § ¢ ¶ Inserting the Batteries 1. Turn the remote control unit over, then slide the rear cover in the direction of the arrow. 2. Insert the AA (SUM-3, IECR-6/1.5V) batteries that came with the remote control unit facing in the directions shown in the figure, then close the rear cover. AA (SUM-3, IECR-6/1.5V) Batteries Notes: Using batteries improperly can cause them to explode. Take note of the following points: · When replacing batteries, replace both batteries with new ones. · Do not short-circuit, disassemble or heat batteries. · Do not dispose of batteries into fire or flames. · Dispose of spent batteries properly. Rear cover Rear side 8 DB415 Functions of Remote Control Unit Buttons Mode Button & FUNC * BAND DISC UP PROG TOP ( VOLUME ) SEARCH Radio CD Turns power on and off. When pressed and held for 1 second: Turns power off. Switches between radio and CD. Switches reception band. Plays the first track. Top play. E glis Increases and decreases volume (in all modes). Moves preset channels up and down. Moves tracks up and down. When pressed and held for 1 second: Fast-forward/ fast-backward. Switches between playback and pause. Switches between playback and pause. ¡ PLAY/PAUSE TM MUTE £ ISR Turns mute on and off. Turns mute on and off. Recalls ISR radio station in memory. Press and hold for more than 2 seconds: Stores current station into ISR memory (radio mode only). Switches among main display, sub display and clock display. Preset scan. When pressed and held for 2 seconds: Auto store. No function. No function. Scan play. ¢ DISP SCAN PS/AS § RPT BLS ¶ RDM MONI Repeat play. Random play. * Some of the corresponding buttons on the source unit and remote control unit have different functions. DB415 9 8. OPERATION Note: · Be sure to read this chapter referring to the front diagrams of chapter 2. CONTROLS on page 3 (unfold). Basic Operations CAUTION When this unit is turned on, starting and stopping the engine of a car with its volume raised to the maximum level may harm your hearing. Be careful about adjusting the volume. Adjusting the Treble 1) Press A-M button 2 and select "TREB". 2) Turning the Rotary knob # clockwise emphasizes the treble; turning it counterclockwise attenuates the treble. * The factory default setting is "0". (Adjustment range: ­6 to +6) Turning ON the Power and Adjusting the Volume 1) Press the POWER button 3. 3) When the adjustment is complete, press A-M button 2 several times until the function mode is reached. English * To turn off the power, press the POWER button 3 for 1 second or longer. Adjusting the Balance 1) Press A-M button 2 and select "BAL". 2) Turning the Rotary knob # clockwise emphasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker. 2) Press the FNC button 3 and select another operation mode. Every time the FNC button 3 is pressed, the display changes the operation mode as: Radio § CD § Radio Notes: * The factory default setting is "0". (Adjustment range: L9 to R9) · The operation mode not connected to the unit will not · be selected. If the CD mode is selected when no disc is inserted, the display shows " NO DISC". 3) When the adjustment is complete, press A-M button 2 several times until the function mode is reached. 3) Turning the Rotary knob # clockwise increases the volume; turning it counterclockwise decreases the volume. Adjusting the Fader 1) Press A-M button 2 and select "FAD". 2) Turning the Rotary knob # clockwise emphasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers. * The volume level is from 0 (minimum) to 33 (maximum). Audio Mode Adjustments Press the A-M button 2 to select the adjustment mode. The mode switches as follows each time the A-M button is pressed: BASS § TREB § BAL § FAD § Previous mode * The factory default setting is "0". (Adjustment range: F9 to R9) 3) When the adjustment is complete, press A-M button 2 several times until the function mode is reached. Adjusting the Bass 1) Press A-M button 2 and select "BASS". 2) Turning the Rotary knob # clockwise emphasizes the bass; turning it counterclockwise attenuates the bass. Setting the Z-enhancer This unit comes with three types of sound tone effects stored in memory. Select the one you prefer. Each time you press Z-EHCR button 0, the tone effect changes in the following order. "Z-ENHANCER 1" § "Z-ENHANCER 2" § "Z-ENHANCER 3" § "Z-EHCR OFF" § "Z-ENHANCER 1"... · Z-ENHANCER 1: bass emphasized · Z-ENHANCER 2: treble emphasized * The factory default setting is "Z-EHCR OFF". * The factory default setting is "0". (Adjustment range: ­6 to +6) 3) When the adjustment is complete, press A-M button 2 several times until the function mode is reached. 10 DB415 · Z-ENHANCER 3: bass and treble emphasized · Z-EHCR OFF: no sound effect Radio Mode Operations FM Reception ® For enhanced FM performance the tuner includes signal actuated stereo control and Multipath noise reduction circuits. Loudness Effect In order to turn on/off the loudness effect, use the LD button 2 for 1 second or longer. Every time the LD button 2 is pressed and held for 1 second or longer, the loudness effect switches on and off. Listening to the Radio 1) Press the FNC button 3 to select the radio mode, then the radio will be on. 2) To select a preset band, press the BND button !, then select one of the preset bands such as FM1, FM2, FM3, or AM. Every time the BND button ! is pressed, the display will change as: FM1 § FM2 § FM3 § AM § FM1 3) Press the SRCH Left/Right button @, then the station at which there is a broadcast will be selected (Seek selection). * When the loudness effect is on, the display will show "LD". E glis Switching the Display Every time the DISP button 5 is pressed, the display will change between the main display and the clock display. Main display Clock display Mute Use this function to turn off the sound immediately. Press the MUTE button $. The sound turns off and "MUTE" appears on the display. Press the MUTE button again to cancel the mute mode. Main display ... Manual Tuning Setting the Clock 1) Press the DISP button 5 to display the clock display. 2) Press and hold the DISP button 5 for 1 second or longer. 3) Press the SRCH Left button @, then set the current hour. 4) Press the SRCH Right button @, then set the current minute. 5) Press the DISP button 5, then the clock is set. 1) Press the BND button !, then select FM1, FM2, FM3 or AM. 2) Press and hold the BND button ! for 1 second or longer, then the display will show "MANU", which means that a manual selection function is on. 3) Press the SRCH Left/Right button @ and select the right station. Seek Tuning 1) Press the BND button !, then select FM1, FM2, FM3 or AM. 2) If the "MANU" on the display is on, press and hold the BND button ! for 1 second or longer. When the "MANU" display is off, the Seek Selection function is on. 3) Press the SRCH Left/Right button @, then when it selects the station in which there is a broadcast, it automatically stops. DB415 Notes: · If · you select another operation mode while you are setting the clock, the clock setting operation will be canceled. If you remove the vehicle's battery for a check or repair, the clock will be reset, so you must set it again. 11 Preset Memory Function Preset Memory Function can store up to 24 stations: six stations for each of FM1, FM2, FM3 and AM. 3) Press and hold the ISR button 4 for 2 seconds or longer. Recalling ISR Press the ISR button 4 then the display will show "ISR", then the radio station previously memorized will be selected. Press the ISR button 4 again to disengage the unit from the Recalling ISR function. Note: · When the present memory function is used, all the content of the memory will be erased. Manual memory function 1) Press the BND button !, and select the band you want to store in the memory. 2) Press the SRCH Left/Right button @ then select the station you want to store in the memory. 3) Press and hold the Preset button 9 for 2 seconds or longer, then the station will be stored in the memory. Auto store function (Automatic Station Store) 1) Press the BND button !, then select the band you want to store in the memory. 2) Press and hold the AS button 8 for 2 seconds or longer, then the station at which the reception is the strongest will be automatically stored in the memory. Area Change Use this function when you are using the car stereo anywhere outside the U.S. Switchable frequency spacing This car stereo is initially set to tune in frequency intervals of 10 kHz for AM and 200 kHz for FM, the standard calibrations in the U.S. When using the unit outside the U.S., use the following procedure to switch the frequency range. The table below lists the frequency specifications for the U.S. and other countries. Initial Setting New Setting (U.S. standard) (outside U.S.) Frequency spacing AM Frequency range Frequency spacing FM Frequency range English 10 kHz 530 to 1,710 kHz 200 kHz 87.9 to 107.9 MHz 9 kHz 531 to 1,629 kHz 50 kHz 87.5 to 108 MHz Note: · When the number of stations stored is less than six, the previous content of the memory for each direct button will be retained. Preset Scanning (Preset Station Scan) When the PS button 8 is pressed, the preset memory numbers flash and the stations are tuned in for 7 seconds each in the order in which they were stored. Press the PS button again to cancel the preset scanning mode. Instant Station Recall (ISR) With this function, a specific radio station can be recalled from any mode. ISR memory 1) Press the FNC button 3, then select the radio mode. 2) Select the radio station which you want to store in the memory. Switching the area change Outside U.S. (New Setting) While pressing the BND button !, press the SRCH Left button @, then "outside U.S." will be selected. Inside U.S. standard (Initial Setting) While pressing the BND button !, press the SRCH Right button @, then the "U.S. standard" will be selected. 12 DB415 CD Mode Operations Loading a Disc 1. Press Open button 1 to access the CD insertion slot behind the FLIP DOWN. 2. Insert the disc into the CD insertion slot with its label side up, then the CD will start playing. For 5-inch (12 cm) CD For 3-inch (8 cm) single CD Ejecting the CD 1. Press Open button 1 to open the FLIP DOWN PANEL. 2. Press Eject button % to eject the CD. Take it out from the ejected position. 3. Close the FLIP DOWN PANEL. CAUTION Be careful not to catch your hand or fingers while closing the FLIP DOWN PANEL. Notes: · If the FLIP DOWN PANEL does not open fully, gently open with your hand. · After taking out the CD, be sure to close the FLIP DOWN PANEL. If a CD (12 cm) is left in the ejected position for 15 seconds, the CD is automatically reloaded (Auto reload). 8 cm CDs are not auto reloaded. Be sure to remove it when ejected. E glis * When inserting a single CD (3"(8 cm)), insert it from the center of the slot. * When inserting a single CD (3"(8 cm)), do not connect an adapter. Note: · If you force a CD into before auto reloading, this can damage the CD. Notes: · Some · CDs recorded in CD-R mode may not be usable. Even when recorded in CD-R/W mode, some CDs may not be usable. Top Function Press the TOP button !, then the CD will start playing from the first song (track number 1). 3. Close the FLIP DOWN PANEL. CAUTION Be careful not to catch your hand or fingers while closing the FLIP DOWN PANEL. Note: · If the FLIP DOWN PANE, does not open fully, gently open with your hand. · After loading a CD, always close the FLIP DOWN PANEL. Selecting Tracks (songs) Press the SRCH Left/Right button @. : Playback will start from the next track. : Playback will start from the beginning of the track currently playing. When this button is pressed again, the CD will play from the previous track. Listening to the Disc already Inserted Press the FNC button 3 to select the CD mode, the CD will start playing. Fast-Forward and Fast-Backward Press and hold the SRCH Left/Right button @. : To fast-forward : To fast-backward Stopping (pausing) Playback Press the Play/Pause button $. "PAUS" appears on the display. Press the Play/Pause button $ again to resume playback. * Pressing the SRCH Left/Right button for 1 second or longer will move forward or backward 5 times faster than normal play, and pressing it for 3 seconds or longer will do the operation 30 times faster. DB415 13 Scan Play (Intro Music Scan) Press the SCN button 8, then the display shows "SCN", then the CD will play the first 10 seconds of each track of the whole disc. Press the SCN button 8 again to disengage the unit from scan play. Repeat Play Press the RPT button 7, then the display shows "RPT", then the track currently playing will be played repeatedly. Press the RPT button 7 again to disengage the unit from repeat play. * A scan play will start from the track following the one currently playing. Random Play Press the RDM button 6, then the display will show "RDM", then the entire tracks on the disc will be played at random. Press the RDM button 6 again to disengage the unit from random play. 9. TROUBLESHOOTING Problem Power does not turn on. (No sound is produced.) No sound output when operating the unit with amplifiers or power antenna attached. Cause Fuse is blown. Incorrect wiring. Measure Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Consult your store of purchase. General CD English 1. Turn the unit off. Power antenna lead is 2. Remove all wires attached to the power antenna shorted to ground or lead. Check each wire for a possible short to excessive current is required ground using an ohm meter. for remote-on the amplifiers 3. Turn the unit back on. or power antenna. 4. Reconnect each amplifier remote wire to the power antenna lead one by one. If the amplifiers turn off before all wires are attached, use an external relay to provide remote-on voltage (excessive current required). The microprocessor has malfunctioned due to noise, etc. Turn off the power, then press the Open button 1 and remove the DCP. Press the reset button for about 2 seconds with a thin rod. Nothing happens when buttons are pressed. Display is not accurate. Reset button DCP or main unit connectors Wipe the dirt off with a soft cloth moistened with cleaning alcohol. are dirty. Compact disc cannot be loaded. Sound skips or is noisy. Another compact disc is already loaded. Compact disc is dirty. Compact disc is heavily scratched or warped. Sound is bad directly after power is turned on. Water droplets may form on the internal lens when the car is parked in a humid place. Eject the compact disc before loading the new one. Clean the compact disc with a soft cloth. Replace with a compact disc with no scratches. Let dry for about 1 hour with the power on. 14 DB415 10. ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. Error Display CD ER2 Cause A CD is caught inside the CD deck and is not ejected. A CD cannot be played due to scratches, etc. Measure This is a failure of CD deck's mechanism and consult your store of purchase. Replace with a non-scratched, non-warped disc. CD CD ER3 E glis CD ER6 A CD is loaded upside-down inside Eject the disc then reload it the CD deck and does not play. properly. If an error display other than the ones described above appears, press the reset button. If the problem persists, turn off the power and consult your store of purchase. DB415 15 11. SPECIFICATIONS FM Tuner Frequency Range: 87.9 MHz to 107.9 MHz Usable Sensitivity: 11 dBf 50 dB Quieting Sensitivity: 17 dBf Alternate Channel Selectivity: 75 dB Stereo Separation (1 kHz): 35 dB Frequency Response (±3 dB): 30 Hz to 15 kHz General Power Supply Voltage: 14.4 V DC (10.8 V to 15.6 V allowable), negative ground Current Consumption: Less than 15 A Speaker Impedance: 4 (4 to 8 allowable) Weight: 3.97 lb. (1.8 kg) Dimensions: 7" (178 mm) Width × 2" (50 mm) Height × 6-1/8" (155 mm) Depth 7" (178 mm) 6-1/8" (155 mm) 2" (50 mm) AM Tuner Frequency Range: 530 kHz to 1,710 kHz Usable Sensitivity: 25 µV English CD Player System: Compact disc audio system Usable Discs: Compact disc Frequency Response: 10 Hz to 20 kHz (±1 dB) Signal-to-Noise Ratio: 100 dB (1 kHz) IHF-A Dynamic Range: 95 dB (1 kHz) Harmonic Distortion: 0.01% 7-3/8" (188 mm) 2-1/4" (58 mm) Notes: Audio Maximum Power Output: 180 W (45 W × 4 ch) Continuous Average Power Output: 17 W × 4, into 4 , 20 Hz to 20 kHz,1%THD Bass Control Action (30 Hz): ±13 dB Treble Control Action (10 kHz): ±10 dB Line Output (with CD 1 kHz, 10 k): 1.8 V · Specifications comply with EIA Standards. · Specifications and design are subject to change without notice for further improvement. 16 DB415