User manual CLARION DXZ535

Owner's manual Mode d'emploi Manual de instrucciones AM/FM CD PLAYER WITH DVD/CD/MD CHANGER CONTROL · RADIO AM/FM-LECTEUR CD AVEC COMMANDE DE CHANGEUR DVD/CD/MD · RADIO-REPRODUCTOR AM/FM DE DISCOS COMPACTOS CON CONTROL DE CAMBIADOR DE DVD/DISCOS COMPACTOS/ MINIDISCOS Clarion Co., Ltd. All Rights Reserved. Copyright © 2002: Clarion Co., Ltd. Printed in China / Imprimé en Chine / Impreso en China 2002/12 (A·C) PE-2552B 280-7884-00 Thank you for purchasing this Clarion product. Please read this owner's manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual. This manual includes the operating procedures of the CD changer, MD changer, DVD changer and TV tuner connected via the CeNET cable. The CD changer, MD changer, DVD changer and TV tuner have their own manuals, but no explanations for operating them are described. 11. ESPECIFICACIONES Sintonizador de FM Gama de frecuencias: 87,9 a 107,9 MHz Sensibilidad útil: 9 dBf Sensibilidad a 50 dB de silenciamiento: 15 dBf Selectividad de canal alternativo: 70 dB Separación entre canales (1 kHz): 35 dB Respuesta en frecuencia (±3 dB): 30 Hz a 15 kHz English Audio Salida máxima de potencia: 208 W (52 W 4 canales) Salida media continua de potencia: 16 W 4, con 4 , de 20 Hz a 20 kHz, 1% de distorsión armónica total Acción de control de graves (60 Hz): ±15 dB Acción de control de agudos (10 kHz): ±12 dB Nivel de salida de línea (CD a 1 kHz): 2V Contents 1. FEATURES ...................................................................................................................................... 2 2. PRECAUTIONS .............................................................................................................................. 3 Flip Down Panel .............................................................................................................................. 3 Handling Compact Discs ................................................................................................................. 4 3. CONTROLS .................................................................................................................................... 5 4. NOMENCLATURE .......................................................................................................................... 6 Names of the Buttons and their Functions ...................................................................................... 6 Major button operations when external equipment is connected to this unit ................................... 6 Display Items ................................................................................................................................... 8 LCD Screen ..................................................................................................................................... 8 5. DCP ................................................................................................................................................. 9 6. REMOTE CONTROL ..................................................................................................................... 10 Inserting the Batteries .................................................................................................................... 10 Functions of Remote Control Unit Buttons ..................................................................................... 11 7. OPERATIONS ............................................................................................................................... 12 Basic Operations ........................................................................................................................... 12 Radio Operations ........................................................................................................................... 14 CD Operations ............................................................................................................................... 16 Operations Common to Each Mode .............................................................................................. 18 8. OPERATIONS OF ACCESSORIES .............................................................................................. 21 CD/MD Changer Operations ......................................................................................................... 21 TV Operations ............................................................................................................................... 23 9. IN CASE OF DIFFICULTY ............................................................................................................ 25 10. ERROR DISPLAYS ....................................................................................................................... 26 11. SPECIFICATIONS ......................................................................................................................... 28 Generales Tensión de alimentación: 14,4 V CC (permisible de 10,8 a 15,6 V), negativo a masa Consumo de corriente: Menos de 15 A Impedancia de los altavoces: 4 (permisible de 4 a 8 ) Peso / Unidad fuente: 2,86 lb. (1,3 kg) Peso / Controlador remoto: 1 oz. (30 g) (incluyendo la pila) Dimensiones / Unidad fuente: 7" (An) 2" (Al) 6-1/6" (Prf) [178 (An) 50 (Al) 157 (Prf) mm] Dimensiones / Controlador remoto: 1-3/4" (An) 4-5/16" (Al) 1-1/8" (Prf) [44 (An) 110 (Al) 27 (Prf) mm] Sintonizador de AM Gama de frecuencias: 530 a 1710 kHz Sensibilidad útil: 25 µV Reproductor de discos compactos Sistema: Sistema audiodigital de discos compactos Discos utilizables: Discos compactos Respuesta en frecuencia (±1 dB): 10 Hz a 20 kHz Relación señal-ruido (1 kHz): 100 dBA Gama dinámica (1 kHz): 95 dB Distorsión armónica: 0,01% 1. FEATURES · · · · · Flip Down Detachable Aluminum Face & High Visibility Multi-Color LC Display Controller for Optional SIRIUS Tuner Modules Z-Enhancer Plus for Sound Creation with 3 Adjustment Modes (2-Band P.EQ) CeNET with Balanced Audio Line Transmission and Dynamic Noise Cancelling 8-Times Oversampling Digital Filter and Dual 1-Bit D/A Converters Nota: · Las especificaciones y el diseño están sujetos a cambio sin previo aviso por motivo de mejoras. 2 DXZ535 DXZ535 85 Display Items English Stereo indication : Disc indication : Scan indication : Repeat indication : Random indication : SIRIUS indication : MAGNA BASS EXTEND indication : Category indication Z-Enhancer Plus indication Operation status indication Titles, frequency, PS names, clock, etc. are displays. : Mute indication : Enter indication : Manual indication 2. PRECAUTIONS 1. When the inside of the car is very cold and the player is used soon after switching on the heater moisture may form on the disc or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc, wipe it off with a soft cloth. If moisture forms on the optical parts of the player, do not use the player for about one hour. The condensation will disappear naturally allowing normal operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to consult the dealer or an experienced radio/TV technician for help. 2. Driving on extremely bumpy roads which cause severe vibration may cause the sound to skip. 3. This unit uses a precision mechanism. Even in the event that trouble arises, never open the case, disassemble the unit, or lubricate the rotating parts. Flip Down Panel English English This unit uses a flip-down structure that makes possible large-size displays. CAUTION When opening and closing the FLIP DOWN PANEL, be careful not to catch your fingers. They could be injured. 1. Always use this unit with the FLIP DOWN PANEL closed. 2. Do not force operations or use this device abnormally when opening or closing the FLIP DOWN PANEL. 3. Do not use the FLIP DOWN PANEL as a tray to place objects on when it is open. 4. When closing the FLIP DOWN PANEL, do not press the [OPEN] button. 5. Strong impacts to the operating or display section can cause damage or deformation. 6. If the FLIP DOWN PANEL does not open fully, gently open it with your hand. CAUTION USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. THE COMPACT DISC PLAYER and MINI DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL. CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. Handling Compact Discs Use only compact discs bearing the mark. or Do not play heart-shaped, octagonal, or other specially shaped compact discs. Some CDs recorded in CD-R/CD-RW mode may not be usable. · Do not use compact discs that have large scratches, are misshapen, cracked, etc. Use of such discs may cause misoperation or damage. · To remove a compact disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges. · Do not use commercially available CD protection sheets or discs equipped with stabilizers, etc. These may damage the disc or cause breakdown of the internal mechanism. Preset channel indication (1 to 6) Disc number indication (1 to 12) Handling INFORMATION FOR USERS:. CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY AND WILL VIOLATE FCC APPROVAL. · Compared to ordinary music CDs, CD-R and CD-RW discs are both easily affected by high temperature and humidity and some of CD-R and CD-RW discs may not be played. Therefore, do not leave them for a long time in the car. · New discs may have Ball-point pen some roughness around the edges. If Roughness such discs are used, the player may not work or the sound may skip. Use a ballpoint pen or the like to remove any roughness from the edge of the disc. · Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen. · Never play a compact disc with any cellophane tape or other glue on it or with peeling off marks. If you try to play such a compact disc, you may not be able to get it back out of the CD player or it may damage the CD player. Storage · Do not expose compact discs to direct sunlight or any heat source. · Do not expose compact discs to excess humidity or dust. · Do not expose compact discs to direct heat from heaters. MODEL 12V GROUND AM 530 -1710kHz /FM 87.9 -107.9MHz TH I S DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS PRODUCTION COMPLIES WITH DHHS RULES 21 CFR SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURE. CLARION CO.,LTD. 50 KAMITODA,TODA-SHI,SAITAMA-KEN,JAPAN MANUFACTURED: Cleaning · To remove fingermarks and dust, use a soft cloth and wipe in a straight line from the center of the compact disc to the circumference. · Do not use any solvents, such as commercially available cleaners, anti-static spray, or thinner to clean compact discs. · After using special compact disc cleaner, let the compact disc dry off well before playing it. LCD Screen In extreme cold, the screen movement may slow down and the screen may darken, but this is normal. The screen will recover when it returns to normal temperature. SERIAL No. PE- Clarion Co.,Ltd. MADE IN Bottom View of Source Unit Be sure to unfold and read the next page. / Veuillez déplier et vous référer à la page suivante. Cerciórese de desplegar y de leer la página siguiente. 8 DXZ535 DXZ535 3 DXZ535 4 3.CONTROLS / LES COMMANDES / CONTROLES Source unit / Appareil pilote / Unidad fuente [ROTARY] [OPEN] 4. NOMENCLATURE Note: · Be sure to read this chapter referring to the front diagrams of chapter "3. CONTROLS" on page 5 (unfold). [T] button · Use the button to input a title in the CD changer mode. · Use the button to scroll the title during CDtext play or MD changer play in the MD changer mode. G When the Sirius Satellite Radio is connected [FNC] button English Français Español English English For details, refer to the Owner's Manual provided with the Sirius Satellite Radio. Names of the Buttons and their Functions [OPEN] button · Deeply push in [OPEN] button to unlock the flip down panel. [UP], [DN] buttons · Select the disc. · Press the button to switch the operation mode among the SIRIUS mode, etc. [DIRECT] buttons · Store a station into memory or recall it directly while in the radio mode. [RDM] button · Perform random play. Also perform disc random play when the button is pressed and held. [ ] button [ROTARY] knob [FNC] [A-M] [BND] [Z+] [SW-VOL] [COLOR] [RDM] button · Perform random play while in the CD mode. · Performs category scan while in the SIRIUS mode. When the button is pressed and held, preset scan is performed. · Adjust the volume by turning the knob clockwise or counterclockwise. · Use the knob to perform various settings. [RPT] button · Perform repeat play. When this button is pressed and held, disc repeat play is performed. [DIRECT] buttons · Stores a station into memory or recall it directly while in the SIRIUS mode. [RPT] button · Repeat play while in the CD mode. [Z+] button · Use the button to select one of the four types of sound characteristics already stored in memory. [SCN] button · Perform scan play for 10 seconds of each track while in the CD mode. [a], [d] button · Press the button to selects a station. [BND] button · Move the next disc in increasing order. [a], [d] [DIRECT] [ ] [SCN] [RPT] [RDM] [DN], [UP] [I] [D] [T] [P/A] [SW-VOL] button · Adjust sub woofer volume. The volume is adjusted in the range ±6. [ ] button [SCN] button · Perform scan play for 10 seconds of each track. Disc scan play is performed when the button is pressed and held. · Play or pause a CD while in the CD mode. What is Sirius Satellite Radio? Sirius is radio the way it was meant to be: Up to 100 new channels of digital quality programming delivered to listeners coast to coast via satellite. That means 50 channels of completely commercial-free music. Plus up to 50 more channels of news, sports, and entertainment from names like CNBC, Discovery, SCI-FI Channel, A&E, House of Blues, E!, NPR, Speedvision and ESPN. Sirius is live, dynamic entertainment, completely focused on listeners. Every minute of every day of every week will be different. All 50 commercial-free music channels are created inhouse and hosted by DJs who know and love the music. Do you like Reggae? How about Classic Rock or New Rock? Sirius has an array of choices spanning a vast range of musical tastes including the hits of the 50's, 60's, 70's, & 80's as well as Jazz, Country, Blues, Pop, Rap, R&B, Bluegrass, Alternative, Classical, Heavy Metal, Dance and many others... From its state-of-the-art, digital broadcasting facility in Rockefeller Center, New York City, Sirius will deliver the broadest, deepest mix of radio entertainment from coast to coast. Sirius will bring you music and entertainment programming that is simply not available on traditional radio in any market across the country. It's radio like you've never heard before. So Get Sirius and Listen Up! For more information, visit siriusradio.com. [a], [d] buttons · Select a station while in the radio mode or select a track when listening to a CD. These buttons are used to make various settings. · Press and hold the button for 1 second or longer to switch the fast-forward/fastbackward. [COLOR] button · Button's color change to multicolor. [ ] button · Play or pause a CD, MD or DVD. [I] button · Recall ISR radio station in memory. · Press and hold for 2 seconds or longer: Store current station into ISR memory (radio mode only). [a], [d] buttons · Select a track when listening to a disc. · Press and hold the button for 1 second or longer to switch the fast-forward/fastbackward. [BND] button · Switch the band, or seek tuning or manual tuning while in the radio mode. · Play a first track while in the CD mode. With the FLIP DOWN PANEL opened / Ouvrez le PANNEAU RABATTABLE Apertura del PANEL ABATIBLE [D] button · Switch the display indication (Main display, Sub display, Clock display). [A-M] button · Use the button to switch to the audio mode (bass/treble, balance/fader Z-Enhancer Plus, Magna Bass Extended adjustment) G When the TV is connected For details, see the section "TV operations". [T] button [ ] [CD SLOT] · Use the button to input a title in the CD mode. · Press and hold the button for 1 second or longer to enter the adjust mode. [P/A] button · Perform preset scan while in the TV mode. When the button is pressed and held, auto store is performed. [FNC] button · Press the button to turn on the power. Press and hold the button for 1second or longer to turn off the power. · Switches the operation mode among the radio mode, etc. [P/A] button · Perform preset scan while in the radio mode. When the button is pressed and held, auto store is performed. [ ] button · Switch the TV picture mode or VTR (external) picture mode. [UP], [DN] buttons · Select the disc. [Q] button · Eject a CD when it is loaded into the unit. [DIRECT] buttons · Store a station into memory or recall it directly. [CD SLOT] · CD insertion slot. [a], [d] buttons · Select a station. [BND] button · Switch the band. · When the button is pressed and held, switch seek tuning or manual mode. Major button operations when external equipment is connected to this unit Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter. Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre. Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas. G When the CD/MD/DVD changer is connected For details, see the section "CD/MD changer operations". For the DVD changer, refer to the Owner's Manual provided with the DVD changer. DXZ535 [D] button · When the button is pressed and held, switches the disc titles or track titles while in the MD changer mode. · When the button is pressed and held, switches the user titles or track titles, etc. while in the CD changer mode. DXZ535 5 DXZ535 6 7 5. DCP The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (DETACHABLE CONTROL PANEL) case to prevent scratches. We recommend taking the DCP with you when leaving the car. English CAUTION Be sure to close the HOLD FLAP for safety when removing the DCP. Attaching the DCP 1. Insert the right side of the DCP into the main unit. 2. Insert the left side of the DCP into the main unit. 2. Removing the DCP 1. Press the [FNC] button for 1 second or longer to turn off the power. 2. Deeply push in [OPEN] button to unlock the flip down panel. If the flip down panel does not open fully, gently open it with your hand. [OPEN] button DCP 1. CAUTION DCP 3. Pull the DCP toward you and remove it. · The DCP can easily be damaged by shocks. After removing it, be careful not to drop it or subject it to strong shocks. · If the FLIP DOWN PANEL is kept open, the DCP may drop due to vibration of the car. This results in damage to the DCP. So close the FLIP DOWN PANEL or remove the DCP to store into the case. · The connector connecting the source unit and the DCP is an extremely important part. Be careful not to damage it by pressing on it with fingernails, screwdrivers, etc. Note: · If the DCP is dirty, wipe off the dirt with a soft, dry cloth only. DCP 4. Close the HOLD FLAP. HOLD FLAP DXZ535 9 6. REMOTE CONTROL (Optional) Receiver for remote control unit English Operating range: 30° in all directions Signal transmitter Remote control unit [FUNC] [ ],[ ] [DUAL ZONE] [ ] [ ],[ ] [BAND] [ISR] [MUTE] [SCN] [RPT] [DISP] [RDM] Inserting the Batteries 1. Turn the remote control unit over, then slide the rear cover in the direction of the arrow. 2. Insert the AA (SUM-3, IECR-6/1.5V) batteries that came with the remote control unit facing in the directions shown in the figure, then close the rear cover. Notes: Using batteries improperly can cause them to explode. Take note of the following points: · When replacing batteries, replace both batteries with new ones. · Do not short-circuit, disassemble or heat batteries. · Do not dispose of batteries into fire or flames. · Dispose of spent batteries properly. AA (SUM-3, IECR-6/1.5V) Batteries Rear cover Rear side 10 DXZ535 Functions of Remote Control Unit Buttons Mode Button [FUNC] [BAND] English Radio CD CD/MD changer DVD changer TV Switches among radio, SIRIUS tuner, CD, CD/MD changer, DVD changer, TV and AUX. Switches reception band. Plays the first track. Top play. Moves the next disc in increasing order. Switches reception band. [ [ ],[ ],[ ] ] Increases and decreases volume (in all modes). Moves preset channels up and down. No function. Turns mute on and off. Recalls ISR radio station in memory. Press and hold for 2 seconds or longer: Stores current station into ISR memory (radio mode only). Switches among main display, sub display, clock display. Preset scan. When pressed and held for 2 seconds: Auto store. Scan play. Scan play. When pressed and held for 1 second: Disc scan play. Preset scan. When pressed and held for 2 seconds: Auto store. Moves tracks up and down. When pressed and held for 1 second: Fast-forward/fast-backward. Switches between playback and pause. Moves preset channels up and down. No function. [ ] [MUTE] [ISR] [DISP] [SCN] [RPT] No function. Repeat play. Repeat play. When pressed and held for 1 second: Disc repeat play. No function. [RDM] No function. Random play. Random play. When pressed and held for 1 second: Disc random play. Switches between TV and VTR. Some of the corresponding buttons on the main unit and remote control unit have different functions. [DUAL ZONE] button is not available. DXZ535 11 7. OPERATIONS Basic Operations CAUTION Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit. Note:Be sure to read this chapter referring to the front diagrams of chapter "3. CONTROLS" on page 5 (unfold). English Adjusting the volume Turning the [ROTARY] knob clockwise increases the volume; turning it counterclockwise decreases the volume. The volume level is from 0 (minimum) to 33 (maximum). Switching the display Press the [D] button to select the desired display. Each time you press the [D] button, the display switches in the following order: Main display Turning on/off the power Note: · Be careful about using this unit for a long time without running the engine. If you drain the car's battery too far, you may not be able to start the engine and this can reduce the service life of the battery. 1. Press the [FNC] button. 2. The illumination and display on the unit light up. The unit automatically remembers its last operation mode and will automatically switch to display that mode. 3. Press and hold the [FNC] button for 1 second or longer to turn off the power for the unit. Note: · System check The first time this unit is turned on after the wire connections are completed, it must be checked what equipment is connected. When the power is turned on, "SYSTEM" and "PUSH PWR" appear in the display alternately, so press the [FNC] button. The system check starts within the unit. When the system check is complete, press the [FNC] button again. Sub display Clock display Main display Once selected, the preferred display becomes the display default. When a function adjustment such as volume is made, the screen will momentarily switch to that function's display, then revert back to the preferred display several seconds after the adjustment. When you have entered a title in a CD, it appears in the sub display. If you have not entered a title, "NO TITLE" appears in the title display instead. For information on how to enter a title, refer to the subsection "Entering titles" in section "Operations Common to Each Mode". Selecting a mode 1. Press the [FNC] button to change the operation mode. 2. Each time you press the [FNC] button, the operation mode changes in the following order: Radio mode SIRIUS mode CD mode CD changer mode MD changer mode DVD changer mode TV mode AUX mode Radio mode... External equipment not connected with CeNET is not displayed. Setting the Z-Enhancer Plus This unit are provided with 4 types of sound tone effects stored in memory. Select the one you prefer. The factory default setting is "Z+ OFF". Each time you press the [Z+] button, the tone effect changes in the following order: 12 DXZ535 Basic Operations English "Z+ OFF" "B-BOOST" "IMPACT" "EXCITE" "CUSTOM" "Z+ OFF" ... · B-BOOST : bass emphasized · IMPACT : bass and treble emphasized · EXCITE : bass and treble emphasized mid de-emphasized · CUSTOM : user custom · Z+ OFF : no sound effect The factory default setting is "B".(Adjustment 1/1.25/1.5/2) 5. When the adjustment is complete, press the [A-M] button several times until the function mode is reached. Adjusting the treble (Gain, Frequency) This adjustment can be performed when the ZEnhancer Plus is set to "CUSTOM". 1. Press the [A-M] button and select "TREBLE". 2. Turning the [ROTARY] knob clockwise emphasizes the treble; turning it counterclockwise attenuates the treble. The factory default setting is "T". (Adjustment range: ­6 to +6) Adjusting the tone Press the [A-M] button and select the item to adjust. Each time you press the [A-M] button, the item changes as following order: GWhen "B-BOOST" is set "B-BOOST" "BAL 0" "FAD 0" Last function mode. GWhen "IMPACT" is set "IMPACT" "BAL 0" "FAD 0" Last function mode. GWhen "EXCITE" is set "EXCITE" "BAL 0" "FAD 0" Last function mode. GWhen "CUSTOM" is set "BASS" "TREBLE" "BAL 0" "FAD 0" Last function mode. GWhen "Z+ OFF" is set "BAL 0" "FAD 0" Last function mode. 3. Press the [d] or [a] button to select "T". Turninng the [ROTARY] knob clockwise or counterclockwise to select the frequency. The factory default setting is "T".(Adjustment 10 kHz/15 kHz) 4. When the adjustment is complete, press the [A-M] button several times until the function mode is reached. Adjusting the balance 1. Press the [A-M] button and select "BAL 0". 2. Turning the [ROTARY] knob clockwise emphasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker. The factory default setting is "BAL 0". (Adjustment range: L13 to R13) Adjusting the bass (Gain, Frequency, Q-curve) This adjustment can be performed when the ZEnhancer Plus is set to "CUSTOM". 1. Press the [A-M] button and select "BASS". 2. Turning the [ROTARY] knob clockwise emphasizes the bass; turning it counterclockwise attenuates the bass. The factory default setting is "B". (Adjustment range: ­6 to +6) 3. When the adjustment is complete, press the [A-M] button several times until the function mode is reached. Adjusting the fader 1. Press the [A-M] button and select "FAD 0". 2. Turning the [ROTARY] knob clockwise emphasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers. The factory default setting is "FAD 0". (Adjustment range: F12 to R12) 3. Press the [d] or [a] button to select "B". Turninng the [ROTARY] knob clockwise or counterclockwise to select the frequency. The factory default setting is "B".(Adjustment 60/100/200 Hz) 4. Press the [d] or [a] button to select "B". Turninng the [ROTARY] knob clockwise or counterclockwise to select the Q-curve. 3. When the adjustment is complete, press the [A-M] button several times until the function mode is reached. DXZ535 13 Basic Operations Radio Operations FM reception ® For enhanced FM performance the tuner includes signal actuated stereo control, Enhanced Multi AGC, Impulse noise reduction curcuits and Multipath noise reduction circuits. English Adjusting the Z-Enhancer Plus 1. Press the [Z+] button and select the Z-Enhancer Plus mode to adjust. 2. Press the [A-M] button and turning the [ROTARY] knob clockwise adjusts in the + direction; tuning it counterclockwise adjusts in the ­ direction. GWhen "B-BST 0" selected, you can adjust the bass in the range of ­3 to 3. GWhen "IMPACT 0" selected, you can adjust the bass and treble in the range of ­3 to 3. GWhen "EXCITE 0" selected, you can adjust the bass and treble in the range of ­3 to 3. When Z-Enhancer Plus is selected, press and hold the [Z+] button for 2 seconds or longer to change to the "CUSTOM" mode. Bass/treble characteristics become flat and the indication "Z+FLAT" is shown in the display. Press the [Z+] button again to change to the "Z+ OFF" mode. Changing the reception area This unit is initially set to USA frequency intervals of 10kHz for AM and 200kHz for FM. When using it outside the USA, the frequency reception range can be switched to the intervals below. GSetting the reception area 1. Press the [BND] button and select the desired radio band (FM or AM). 2. While pressing the [A-M] button and hold the number "2" of the [DIRECT] buttons for 2 seconds or longer, the reception area switches from inside the USA to outside the USA. 3. While pressing the [A-M] button and hold the number "1" of the [DIRECT] buttons for 2 seconds or longer, the reception area switches from outside the USA to inside the USA. Any station preset memories are lost when the reception area is changed. Adjusting MAGNA BASS EXTEND The MAGNA BASS EXTEND does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound. The factory default setting is off. Listening to the radio 1. Press the [FNC] button and select the radio mode. The frequency or PS appears in the display. PS: Programme service name 1. Press and hold the [A-M] button for 1 second or longer to turn on the MAGNA BASS EXTEND effect. "M-B EX" lights in the display. 2. Press and hold the [A-M] button for 1 second or longer to turn off the MAGNA BASS EXTEND effect. "M-B EX" goes on in the display. Adjusting the subwoofer When you default select one of mode (LPF50, LPF80, LPF120). The factory default setting is "S-VOL 0". (Adjustment range: ­6 to +6) 2. Press the [BND] button and select the radio band. Each time the button is pressed, the radio reception band changes in the following order: FM1 FM2 FM3 AM FM1... 3. Press the [a] or [d] button to tune in the desired station. Tuning There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning. 1. Press the [SW-VOL ] button to select the subwoofer volume increases or decreases. 2. Press and hold the [SW-VOL ] button, the subwoofer volume automatically increases or decreases. Seek tuning 1. Press the [BND] button and select the desired band (FM or AM). If "MANU" is lit in the display, press and hold the [BND] button for 1 second or longer. "MANU" in the display goes off and seek tuning is now available. 14 DXZ535 Radio Operations English 2. Press the [a] or [d] button to automatically seek a station. When the [d] button is pressed, the station is sought in the direction of higher frequencies; if the [a] button is pressed, the station is sought in the direction of lower frequencies. Auto store Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains unoverwritten at the memory position. 1. Press the [BND] button and select the desired band (FM or AM). 2. Press and hold the [P/A] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels. If auto store is performed in the FM bands, the stations are stored in FM3 even if FM1 or FM2 was chosen for storing stations. Manual tuning There are 2 ways available: Quick tuning and step tuning. When you are in the step tuning mode, the frequency changes one step at a time. In the quick tuning mode, you can quickly tune the desired frequency. 1. Press the [BND] button and select the desired band (FM or AM). If "MANU" is not lit in the display, press and hold the [BND] button for 1 second or longer. "MANU" is lit in the display and manual tuning is now available. Preset scan Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory. 1. Press the [P/A] button. 2. When a desired station is tuned in, press the [P/A] button again to continue receiving that station. Note: · Be careful not to press and hold the [P/A] button for 2 seconds or longer, otherwise the auto store function is engaged and the unit starts storing stations. 2. Tune into a station. GQuick tuning: Press and hold the [a] or [d] button for 1 second or longer to tune in a station. GStep tuning: Press the [a] or [d] button to manually tune in a station. Recalling a preset station A total of 24 preset positions (6-FM1, 6-FM2, 6FM3, 6-AM) exists to store individual radio stations in memory. Pressing the corresponding [DIRECT] button recalls the stored radio frequency automatically. 1. Press the [BND] button and select the desired band (FM or AM). 2. Press the corresponding [DIRECT] button to recall the stored station. Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store that station into preset memory. Instant station recall (ISR) Instant station recall is a special radio preset that instantly accesses a favorite radio station at a touch of a button. The ISR function even operates with the unit in other modes. GISR memory 1. Select the station that you wish to store in ISR memory. 2. Press and hold the [I] button for 2 seconds or longer. GRecalling a station with ISR In any mode, press the [I] button to turn on the radio function and tune the selected radio station. "ISR" appears in the display. Press the [I] button again to return to the previous mode. Manual memory 1. Select the desired station with seek tuning, manual tuning or preset tuning. 2. Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory. DXZ535 15 CD Operations English Loading a CD 1. Press the [OPEN] button to access the CD SLOT behind the FLIP DOWN PANEL. 2. Insert a CD into the centre of the CD SLOT with the label side facing up. The CD plays automatically after loading. Notes: · Never insert foreign objects into the CD SLOT. · If the CD is not inserted easily, there may be another CD in the mechanism or the unit may require service. or mark and · Discs not bearing the CD-ROMs cannot be played by this unit. · Some CDs recorded in CD-R/CD-RW mode may not be usable. Loading 8 cm compact discs No adapter is required to play an 8 cm CD. Insert the 8 cm CD into the centre of the insertion slot. Displaying CD titles This unit can display title data for CD-text CDs and user titles input with this unit. 1. Press the [D] button to display the title. 2. Each time you press and hold the [D] button for 1 second or longer, the title display changes in the following order: User title (disc) CD-text title (disc) Artist name CD-text title (track) User title (disc)... Note: · If the CD playing is not a CD-text CD or no user title has been input, "NO TITLE" appears in the display. Ejecting a CD 1. Press the [OPEN] button to open the FLIP DOWN PANEL. 2. Press the [Q] to eject the CD. Take it out from the ejected position. 3. Close the FLIP DOWN PANEL. 3. Close the FLIP DOWN PANEL. CAUTION Be careful not to catch your hand or fingers while closing the FLIP DOWN PANEL. Notes: · If the FLIP DOWN PANEL does not open fully, gently open with your hand. · After loading a CD, always close the FLIP DOWN PANEL. CAUTION Be careful not to catch your hand or fingers while closing the FLIP DOWN PANEL. Notes: · If the FLIP DOWN PANEL does not open fully, gently open with your hand. · After taking out the CD, be sure to close the FLIP DOWN PANEL. If a CD (12 cm) is left in the ejected position for 15 seconds, the CD is automatically reloaded (Auto reload). 8 cm CDs are not auto reloaded. Be sure to remove it when ejected. Note: · If you force a CD into before auto reloading, this can damage the CD. Listening to a CD already inserted Press the [FNC] button to select the CD mode. Play starts automatically. If no CD is loaded in the unit, "NO DISC" appears in the display. Pausing play 1. Press the [ ] button to pause play. "PAUSE" appears in the display. 2. To resume CD play, press the [ again. ] button Selecting a track GTrack-up 1. Press the [d] button to move ahead to the beginning of the next track. 2. Each time you press the [d] button, the track advances ahead to the beginning of the next track. GTrack-down 1. Press the [a] button to move back to the beginning of the current track. 2. Press the [a] button twice to move to the beginning of the previous track. 16 DXZ535 CD Operations English Fast-forward/fast-backward GFast-forward Press and hold the [d] button for 1 second or longer. GFast-backward Press and hold the [a] button for 1 second or longer. Repeat play The repeat play continuously plays the current track. This function continues automatically until it is cancelled. 1. Press the [RPT] button. "RPT" lights in the display and the current track is repeated. 2. To cancel the repeat play, press the [RPT] button again. "RPT" goes off from the display and normal play resumes. Top function The top function resets the CD player to the first track of the disc. Press the [BND] button to play the first track (track No. 1) on the disc. Random play The random play selects and plays individual tracks on a disc in no particular order. This function continues automatically until it is cancelled. 1. Press the [RDM] button. "RDM" lights in the display, an individual track is selected randomly and play begins. 2. To cancel the random play, press the [RDM] button again. "RDM" goes off from the display and normal play resumes. Scan play The scan play locates and plays the first 10 seconds of each track on a disc automatically. This function continues on the disc until it is cancelled. The scan play is useful when you want to select a desired track. 1. Press the [SCN] button to start scan play. "SCN" lights in the display. 2. To cancel the scan play, press the [SCN] button again. "SCN" goes off from the display and the current track continues to play. DXZ535 17 Operations Common to Each Mode English Setting LOW PASS FILTER The factory default setting is "LPF 120". Setting the method for title scroll Set how to scroll in CD-TEXT or MD. The factory default setting is "ON". 1. Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select "SW LPF". 3. Turn the [ROTARY] knob clockwise or counterclockwise to select the setting. Each time you turn the [ROTARY] knob, the setting changes in the following order: REAR LPF 50 LPF 80 LPF 120 4. Press the [T] button to return to the previous mode. Dimmer control You can setting the dimmer control on or off. The factory default setting is "ON". 1. Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select "SCROLL". 3. Turn the [ROTARY] knob clockwise or counterclockwise and select "ON" or "OFF". G ON: To scroll automatically. G OFF: To scroll just 1 time when the title was changed or the title key was pressed. 4. Press the [T] button to return to the previous mode. 1. Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select "DIMMER". 3. Turn the [ROTARY] knob clockwise to "ON" or counterclockwise to "OFF". 4. Press the [T] button to return to the previous mode. AUX function This system has an external input jack so you can listen to sounds and music from external devices connected to this unit. Selecting AUX IN sensitivity Make the following settings to select the sensitivity when sounds from external devices connected to this unit are difficult to hear even after adjusting the volume. The factory default setting is "MID". Adjusting the display contrast You can adjust the display contrast to match the angle of installation of the unit. The factory default setting is "5". (Adjustment level:1to 8) 1. Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select "CONTRAST". 3. Turn the [ROTARY] knob clockwise or counterclockwise to adjust the contrast. 4. Press the [T] button to return to the previous mode. 1. Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select "AUX SENS". 3. Turn the [ROTARY] knob clockwise or counterclockwise as needed and select from "HIGH", "MID" or "LOW". 4. Press the [T] button to return to the previous mode. Setting the clock 1. Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select "CLOCK". 3. Press the [ ] button. 18 DXZ535 Operations Common to Each Mode English 4. Press the [a] or [d] button to select the hour or the minute. 5. Turn the [ROTARY] knob clockwise or counterclockwise to set the correct time. The clock is displayed in 12-hour format. Entering MESSAGE INFORMATION Message up to 30 characters long can be stored in memory and displayed for CD, CD changer and TV stations. * The factory default setting is "WELCOME TO CLARION". 6. Press the [ ] button to store the time into memory. 7. Press the [T] button to return to the previous mode. Note: · You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the car's battery or take out this unit, the clock is reset. While setting the clock, if another button or operation is selected, the clock set mode is canceled. Turning the screen saver function on or off This unit is provided with the screen saver function which allows you to show various kinds of patterns and characters in the Operation Status indication area of the display in a random order. You can turn on and off this function. If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display. The factory default setting is "SS". 1. Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select "INPUT". 3. Press the [ ] button. 4. Press the [a] or [d] button to move the cursor. 5. Press the [D] button to select a character. Each time you press the [D] button, the character changes in the following orders: Numbers Symbols Capital letters Numbers... 6. Turn the [ROTARY] knob to select the desired character. 7. Repeat step 4 to 6 to enter up to 30 characters for message. 8. Press and hold the [ ] button for 2 seconds or longer to store the message in memory and cancel input message. Setting the button illumination Press the [COLOR] button to select a color type. Each time you press the [COLOR] button, the type changes in the following orders: CLR SCAN RED MANDARIN ORANGE AMBER YELLOW Y-GREEN LIME GREEN D-GREEN USER CLR SCAN... GSetting CLR SCAN mode As selecting "CLR SCAN", the color automatically changes in the following orders: CLR SCAN RED MANDARIN ORANGE AMBER YELLOW Y-GREEN LIME GREEN D-GREEN USER CLR SCAN... The factory default setting is "CLR SCAN". During change the color's name not appear. After 3 second the color change to the other. 1. Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display. 2. Press the [a] or [d] button to select "SCRN SVR". 3. Press the [ ] button. 4. Turn the [ROTARY] knob clockwise or counterclockwise to select the setting. Each time you turn the [ROTARY] knob, the setting changes in the following order: OFF SS MESSAGE 5. Press the [ ] button to store the setting. 6. Press the [T] button to return to the previous mode. The following illustration presents one of the patterns which are shown when the screen saver function is turned on. DXZ535 19 Operations Common to Each Mode English GSetting USER mode The factory default setting is "R>8 G>3". As selecting "USER", press and hold the [COLOR] button 1 second or longer "R>8 G>3" appears in the display. 1. Press the [a] or [d] button to move the cursor. 2. Turn the [ROTARY] knob clockwise or counterclockwise to select from 0 to 8. 3. Press and hold the [ ] button for 2 seconds or longer to store the color in memory and cancel setting mode. Clearing titles 1. Select and play a CD in the CD changer or tune in to a TV station for which you want to clear the title. 2. Press the [D] button and display the sub. 3. Press the [T] button. The display switches to the title input display. 4. Press the [BND] button. 5. Press and hold the [ ] button for 1 second or longer to clear the title and cancel title input mode. Entering titles Titles up to 8 characters long can be stored in memory and displayed for CD, CD changer and TV stations. The number of titles that can be entered for each mode are as follows. Mode CD mode TV mode CD changer mode CDC655z connected CDC655Tz connected CDC1255z connected Number of titles 50 titles 20 titles Number of titles 60 titles 100 titles 50 titles Triggered audio mute for cellular telepones This unit requires special wiring to mute the audio signal automatically when a cellular telephone rings in the car. This function is not compatible with all cellular telepones Contact your local authorized Clarion dealer for information on proper installation and compatibility. 1. Press the [FNC] button to select the mode you want to enter a title (CD, CD changer or TV). 2. Select and play a CD in the CD changer or tune in to a TV station for which you want to enter the title. 3. Press the [D] button and display the sub. 4. Press the [T] button. 5. Press the [a] or [d] button to move the cursor. 6. Press the [D] button to select a character. Each time you press the [D] button, the character changes in the following order: Numbers Symbols Capital letters Numbers... 7. Turn the [ROTARY] knob to select the desired character. 8. Repeat steps 5 to 7 to enter up to 8 characters for the title. 9. Press and hold the [ ] button for 2 seconds or longer to store the title into memory and cancel title input mode. 20 DXZ535 8. OPERATIONS OF ACCESSORIES CD/MD Changer Operations CD/MD changer functions When an optional CD/MD changer is connected through the CeNET cable, this unit controls all CD/MD changer functions. This unit can control a total of 2 changers. Press the [FNC] button and select the CD(MD) changer mode to start play. If 2 CD(MD) changers are connected, press the [FNC] button to select the CD(MD) changer for play. If "NO MAG" appears in the display, insert the magazine into the CD changer. "DISC CHK" appears in the display while the player loads (checks) the magazine. If "NO DISC" appears in the display, eject the magazine and insert discs into each slot. Then, reinsert the magazine back into the CD changer. If "NO DISC" appears in the display, load MDs into the MD changer. Note: · Some CDs recorded in CD-R/CD-RW mode may not be usable. English Notes: · If the CD playing is not a CD-text CD or no user title has been input, "NO TITLE" appears in the display. · If a CD-text CD is not input its disc title or a track title, "NO TITLE" appears in the display. Switching disc titles and track titles (MD) This unit can display disc titles and track titles already entered on MDs. Titles cannot be entered for MDs with this unit. 1. Press [D] button to display the title. The disc title or track title is displayed. 2. Each time you press and hold the [D] button for 1 second or longer, the display toggles between the disc title and the track title. Note: · If an MD is not input its disc title or a track title, "NO TITLE" appears in the display. CAUTION CD-ROM discs cannot be played from every CD changer, it's depended on the model. Procedure to scroll a title Set "SCROLL" to "ON" or "OFF". (The factory default setting is "ON". Refer to the subsection "Turning the screen saver function on or off" in section "Operation common to each mode".) GWhen set to "ON" The title is automatically kept scrolling. GWhen set to "OFF" Press the [T] button to scroll the title. Pausing play 1. Press the [ ] button to pause play. "PAUSE" appears in the display. 2. To resume play, press the [ ] button again. Displaying CD titles This unit can display title data for CD-text CDs and user titles input with this unit. Title data for CD-text CDs can be displayed with this unit only when it is connected to CDC655Tz. Selecting a CD [DN] or [UP] button correspond to a disc load in the magazine. Press the [DN] or [UP] button to select the desired disc. If a CD is not loaded in a slot of magazine, "NO DISC" appears in the display. GWhen connected to CDC655z or CDC1255z. Press the [D] button to display the title. GWhen connected to CDC655Tz 1. Press the [D] button to display the title. 2. Each time you press and hold the [D] button for 1 second or longer, the title display changes in the following order: User title (disc) CD-tect title (disc) Artist title CD-text title (track) User title (disc)... DXZ535 21 CD/MD Changer Operations English Selecting a MD [DN] or [UP] button correspond to a MD load in the MD changer. Press the [DN] or [UP] button to select the desired disc. If a MD is not loaded in a slot of MD changer, "NO DISC" appears in the display. 2. To cancel disc scan play, press the [SCN] button again. "DISC" and "SCN" go off from the display and the current track continues to play. Repeat play Repeat play continuously plays the current track. This function continues automatically until it is cancelled. 1. Press the [RPT] button. "RPT" lights in the display and the current track is repeated. 2. To cancel repeat play, press the [RPT] button again. "RPT" goes off from the display and normal play resumes. Selecting a track GTrack-up 1. Press the [d] button to move ahead to the beginning of the next track. 2. Each time you press the [d] button, the track advances ahead to the beginning of the next track. GTrack-down 1. Press the [a] button to move back to the beginning of the current track. 2. Press the [a] button twice to move to the beginning of the previous track. Disc repeat play After all the tracks on the current disc have been played, disc repeat play automatically replays the current disc over from the first track. This function continues automatically until it is cancelled. 1. Press and hold the [RPT] button for 1 second or longer. "DISC" and "RPT" light in the display and disc repeat play starts. 2. To cancel disc repeat play, press and hold the [RPT] button again. "DISC" and "RPT" go off from the display and normal play resumes on the current track. Fast-forward/fast-backward GFast-forward Press and hold the [d] button for 1 second or longer. GFast-backward Press and hold the [a] button for 1 second or longer. Scan play Scan play locates and plays the first 10 seconds of each track on a disc automatically. This function continues on the disc until it is cancelled. The scan play is useful when you want to select a desired track. Random play Random play selects and plays individual tracks on the disc in no particular order. This function continues automatically until it is cancelled. 1. Press the [RDM] button. "RDM" lights in the display and random play begins. 2. To cancel random play, press the [RDM] button again. "RDM" goes off from the display and normal play resumes. 1. Press the [SCN] button to start track scanning. "SCN" lights in the display. 2. To cancel the scan play, press the [SCN] button again. "SCN" goes off from the display and the current track continues to play. Disc random play The disc random play selects and plays individual tracks or discs automatically in no particular order. This function continues automatically until it is cancelled. 1. Press and hold the [RDM] button for 1 second or longer. "DISC" and "RDM" light in the display and disc random play starts. 2. To cancel disc random play, press and hold the [RDM] button again. "DISC" and "RDM" go off from the display and normal play resumes from the current track. Disc scan play Disc scan play locates and plays the first 10 seconds of the first track on each disc in the currently selected CD (MD) changer. This function continues automatically until it is cancelled. Disc scan play is useful when you want to select a desired CD (MD). 1. Press and hold the [SCN] button for 1 second or longer. "DISC" and "SCN" light in the display and disc scan play starts.