User manual CLARION OHMD102

INTRODUCTION The Clarion OHMD102 overhead monitor system is designed strictly for rear-seat entertainment. Viewing the monitor while operating a motor vehicle can result in serious injury and/or property damage. Clarion is not responsible for any injury and/or property damage as a result of the improper use or viewing of the monitor. English O H1 0 2 MD WARNING Welcome! Thank you for purchasing the Clarion OHMD102 overhead monitor system. This monitor is engineered with advanced technological designs and components for the best picture quality and convenience. Features: · 10.2" Wide-Screen Flip Down Monitor with TFT Active Matrix Display with 16:9/4:3 format · Selectable screen modes: Normal, Zoom, Full, and Wide Screen · Built-in 1 channel Audio/Video input source selector · Audio/Video Game Port · Video output for additional monitors · Front panel menu, picture, source, and DVD controls · OSD (On-Screen Display) · Built-in IR transmitter for WH104 wireless headphone (2 headphones included) · Built-in dome lights · IR remote control · Supports both NTSC and PAL video formats 2 ohmd 102 2 3/16/05, 6:35 AM INTRODUCTION d le nd/or of the The Clarion OHMD102 is a full-featured overhead entertainment center featuring 10.2 Wide-Screen Flip Down Monitor with TFT Active Matrix Display with 16:9/4:3 format. This system combines flexibility, reliability, and expandability all in one. Designed primarily for rear seat entertainment, the audio from the OHMD102 can be enjoyed privately through wireless headphones and/or incorporated into any head unit. And with the ability to access all the features and functions through an IR remote control, the rear passengers wont have to leave the comfort and safety of their seat. OHMD102 onitor gical venience. Since Clarion has always been an innovator in the mobile entertainment industry, a lot of responsibilities follow suit. One of the major emphasizes incorporated into the OHMD102 is reliability. This was achieved by using high-grade electronic components and heightened electronic connections. As the mobile environment is extremely harsh, these technological advances insure years of unrelenting operation. Given that the OHMD102 is the centerpiece of the entertainment center, it features a built-in A/V switcher allowing for multiple A/V sources to be added. Included with the OHMD102, is a Game Port Station, which also can be used for a temporary device, such as a camcorder or game station, to be enjoyed in the vehicle. With everything that Clarion has to offer with the OHMD102, it truly lives up to Clarion's motto, BE HEARD, BE SEEN! Screen ohmd 102 3 3/16/05, 6:35 AM English O H1 0 2 MD 3 The Clarion OHMD102 have been tested and found to comply within the limits of a Class B digital device, pursuant of Part 15 of the FCC rules. These limitations are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and uses radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to a radio or television reception, turn off the equipment and contact a local Clarion dealer for assistance. Changes or modifications to this product not approved by the manufacturer will void the warranty and violate FCC Approval. 4 ohmd 102 4 3/16/05, 6:35 AM English O H1 0 2 MD FCC Approval TABLE OF CONTENTS OHMD102 GENERAL INFORMATION BASIC OPERATIONS ADVANCED OPERATIONS START-UP MENU SETTINGS REMOTE CONTROL HEADPHONE FUNCTIONS INSTALLATION PACKAGE CONTENT TROUBLESHOOTING GLOSSARY SPECIFICATIONS WARRANTY INFORMATION 6-13 14-21 22-26 27-30 31-33 34 35-42 43 44-45 46-49 50 51-52 ohmd 102 5 3/16/05, 6:35 AM English O H1 0 2 MD 5 OVERHEAD DVD PLAYER and BUTTONS 6-7 OVERHEAD DVD PLAYER OVERHEAD DVD SYSTEM 1 2 1 2 Switch for interior lighting POWER Turns system power on /off 6 ohmd 102 6 3/16/05, 6:35 AM English O H1 0 2 MD OVERHEAD DVD PLAY- OHMD102 OVERHEAD DVD SYSTEM 11 1 2 3 4 5 6 7 8 12 10 9 1 EJECT button DVD: previous chapter; VCD/CD/MP3: previous track menu:move cursor downward 6 Fastreverse for playback Fastforward for playback SOURCE button 10.2 TFT display 2 7 8 3 DVD: next chapter VCD/CD/MP3: next track menu move cursor upwards PLAY/ PAUSE button MENU button 9 10 DVD player disc slot Monitor Autopower ON/OFF (Located on the base) RESET button (Located on the base) 11 4 5 12 ohmd 102 7 3/16/05, 6:35 AM English O H1 0 2 MD English 7 GENERAL INFORMATION · This overhead monitor system is designed for use in 12V DC negative ground vehicles. · Do not operate the overhead monitor system in ways other than described in this manual. Doing so may result in damage to the monitor system and/or the vehicle, voiding the warranty of this product. · SAFETY FIRST! This overhead monitor system is designed for rear-seat entertainment ONLY. Do not install in/on dashboard or anywhere else that would allow the operator of the vehicle to view the monitor. · Do not attempt to disable or modify the overhead monitor system. Doing so may damage the monitor system, and void the warranty. Do not attempt to dis- mantle the monitor you could suffer electric shock as a result. · Keep all liquids away from the overhead monitor system. · Do not leave the overhead monitor system open when not in use. Direct sunlight can cause the monitor not to function properly. · In extreme cold temperatures, the movement of the picture may appear to move slow and dark. The overhead monitor system will function properly once the temperature rises. · Do not hang or hang items from overhead monitor system. · Prior to Installation Disconnect the negative and positive terminals of the battery. · When doing so, please observe the safety notices provided by the vehicle manufacturer. · Before drilling the holes necessary for mounting the equipment for laying cables, please make sure that concealed cables, the fuel tank and lines can not be damaged in the process! If you have any questions or problems concerning the monitor that are not cover in this manual, please consult a local Clarion dealer for assistance. Before installing this overhead monitor system, please check your local traffic laws and regulations. 8 ohmd 102 8 3/16/05, 6:35 AM English O H1 0 2 MD Precautions and Safety Notices GENERAL INFORMATION OHMD102 Keep all liquids away from the OHMD102 overhead monitor system. Liquids inside the monitor will damage the electronics, and can result in electrical shock or fire. In the event that the unit should become wet, turn off the power and contact a local Clarion dealer for assistance. To clean the monitor, use a clean soft cloth and gently wipe the screen. If possible, use specially designed "monitor wipes" to clean the screen. Handling and Cleaning DVDs and CDs · Avoid leaving fingerprints on the discs when handling it, never handle a disc by its edges. · Always store discs in their protective cases. · Always ensure that discs are clean and dry before inserting. · Protect discs from heat and direct sunlight. Dirt, dust, scratches and warped discs will cause unit malfunction. · DO NOT PUT LABELS ON DISCS. Disc Cleaning Use a dry soft cloth to wipe the surface of a disc. If a disc is especially dirty use a soft cloth slightly moistened with rubbing alcohol. Never use solvents such as benzine, or conventional record cleaners as they may mar the surface of the disc. 9 ohmd 102 9 3/16/05, 6:35 AM English O H1 0 2 MD Care And Maintenance GENERAL INFORMATION New disc may have some roughness around the edge. The DVD player may not work properly or the video/sound reproduction may skip if such discs are used. Use a ballpoint pen or pencil to remove roughness from the edges of the disc. NOTE: NEVER USE A KNIFE OR A SHARP OBJECT TO REMOVE THE ROUGHNESS AROUND THE EDGES YOU MAY HARM YOURSELF OR THE DISC! English O H1 0 2 MD Preparing a New Disc Servicing the OHMD102 Overhead Monitor System In the event a problem arises with the OHMD102 overhead monitor system, do not attempt to disassemble or repair the monitor yourself. Opening or attempting to service the monitor will void the warranty; instead, contact a local Clarion dealer for assistance. The internal parts are not serviceable by the user. The OHMD102 is a class I laser product, using a laser which could cause hazardous radiation exposure if improperly disassembled. All warranty service should be performed by an authorized Clarion service center. CAUTION! Changes or modifications to this product not approved by the manufacturer will void the warranty and will violate FCC approval. 10 ohmd 102 10 3/16/05, 6:35 AM GENERAL INFORMATION OHMD102 If the player is used while the interior of the vehicle is very cold, condensation may form on the disc or on the internal optical pickup system and prevent proper playing of the disc. If you suspect that condensation is an issue, eject the disc and inspect the playing surface. If necessary, remove the condensation with a clean soft cloth as described above. If you still experience problems with playback, you will need to wait for approximately one hour to allow the OHMD102 to warm up, and for the condensation to evaporate. If playback issues continue, please see your authorized Clarion dealer. Discs Compatible with OHMD102 This OHMD102 is designed and manufactured to play DVD discs with region code 1. Supported Discs Formats · DVD video 5, 9, 10, and 18 · Video CD · Super Video CD · CD Audio · MP3 (CD-ROM) · JPEG image CD 1 and 0 Unsupported Formats · DVD-ROM · DVD-RW/DVD-RAM · CDV · CD-G · DVDs with Region code · Kodak photo CD (previously CDI format) NOTE: As a rule, even self-burned CDs are supported. However depending on the blank discs and burning program used, playback difficulties may arise. ohmd 102 11 3/16/05, 6:35 AM English O H1 0 2 MD 11 Temperature and Moisture GENERAL INFORMATION user to visible/invisible laser rays which exceed the limits for Class 1 laser products. Do not attempt to repair it yourself refer servicing it to a trained Clarion authorized dealer. English O H1 0 2 MD CAUTION: Any inappropriate use of the device may expose the FILE and S Copyright Protection This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macro vision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macro vision Corporation, and is intended for home and other limited viewing uses only unless other wise authorized by Macro vision Corporation. Reverse engineering or disassembly is prohibited. The folder na MP3 play. Ho alphabetical respectively ( numerals tha with a folder conflict with M impossible. A number of file excess of tha files in each f recorded ont displayed on "Dolby"Digital Manufactured license from Dolby Laboratories. "Dolby" and double-Dsymbolare trademarks of Dolby Laboratories. Confidential unpublished works. 1992-1997 Dolby Laboratories All rights reserved. SOUND QU Some noise m coder softwa OHMD102. BIT RATES The OHMD10 48kHz, and 9 bit rate), the different from VBR ranges ID3V1 and Both ID3V1 a characters pe 12 ohmd 102 12 3/16/05, 6:35 AM GENERAL INFORMATION OHMD102 The folder name and file name can be displayed as the title during MP3 play. However, the title must be within 31 and 27 single-byte alphabetical letters and numerals for the folder name and file name, respectively (not including an extension). Entering more letters or numerals than specified may cause an incorrect display. A disc with a folder having more than 8 hierarchical levels will conflict with MP3 system requirements and playback will be impossible. A total of 255 files and folders are allowed. When the number of files and folders is more than 255, playback of tracks in excess of that number is impossible. There is a maximum of 31 files in each folder. File tracks are played in the order that they were recorded onto a disc. (Files might not always be played in the order displayed on the PC.) SOUND QUALITY Some noise might be audible - this depends on the type of encoder software used while recording. It is not noise created by the OHMD102. BIT RATES The OHMD102 supports the following bit rates: 32kHz, 44.1kHz, 48kHz, and 96kHz. In case of a track recorded at VBR (variable bit rate), the display for the play time of the track may be slightly different from the actual playtime. Also, the recommended value for VBR ranges from 32 kbps to 320 kbps. ID3V1 and ID3V2 TAGS SUPPORTS Both ID3V1 and ID3V2 tags are supported. These allow up to 30 characters per song name and 30 characters per artist name. ohmd 102 13 3/16/05, 6:35 AM English O H1 0 2 MD 13 FILE and STRUCTURE BASIC OPERATIONS Press the OPEN button to release the overhead monitor. Gently push down on the bottom of the monitor until it reaches the desired position. The monitor will turn on automatically when it is fully open. English O H1 0 2 MD OPENING THE OVERHEAD MONITOR OPEN POSITION CLOSING THE OVERHEAD MONITOR Gently push the backside of the monitor until it clicks into the overhead monitor housing. The monitor will turn off automatically when it is returned to the closed position. Note: Do not place any objects between the monitor and the monitor housing, this can result in serious damage to the monitor. 14 ohmd 102 14 3/16/05, 6:35 AM BASIC OPERATIONS OHMD102 · Press the Monitor Setup button once or several times to call up the display settings. · Press the or buttons to change the value of the settings. Press the OK button to exit the display mode. Brightness · Set the brightness between 0 and 32 Color Saturation (AV1 only) · Set the color saturation 0 and 32 Contrasts · Set the contrasts between 0 and 32 Hue Balance (AV1 only) · Set the Color balance between 0 and 32 Image Sharpness (AV1 only) · Set the sharpness between 0 and 32 TV Type · Set the TV standard appropriate to the connected AV source. The options are AUTO, PAL, and NTSC. Display Mode · Set the Display mode according to the current video media. Choose between NORMAL (4:3), FULL (16:9) and WIDE1 (extended 16:9). Mount Mode · Set the installation position to NORMAL (overhead). Note: The Desktop "settings is not supported by the DVD player. ohmd 102 15 3/16/05, 6:35 AM English O H1 0 2 MD 15 DISPLAY SETTINGS BASIC OPERATIONS This function allows the display settings, brightness, contrast, color, tint sharpness to be saved for a specific user and then subsequently restored. · Set the desired values for the display settings. · Select LOADED by pressing the button to save the values as user settings. · Select STORED button pressing the button to restore the values user settings. English O H1 0 2 MD User Settings Default Settings · Select DEFAULT and press the the display to its default settings. and buttons to return Start/Stopping and Playback · Press the button to stop playback. The player will store the current disc position. · Press the button to resume playback at the stored position. · Press the button twice to stop the play back to the initial track/ chapter of the inserted disc. Pause (Still Picture) · Press the button during playback. · Press the button once again to resume normal playback. Fast Forward/Reverse Press the or the button during playback. DVD Speeds DVD: Normal 2x-4x-6x-8x-20x VDC/CD/MP3: Normal 2x-4x-6x-8x 16 ohmd 102 16 3/16/05, 6:35 AM BASIC OPERATIONS OHMD102 Skipping Chapters/Tracks · Press one of the buttons during playback. · Press the button to jump to the next chapter (DVD) or track (VCD/CD). · Press the button to jump to the previous chapter (DVD) or track (VCD/CD). Repeating Chapters/Tracks · Press the REPEAT button once, or more than once to select the REPEAT MODE. The menu will follow in this order. DVD Functions · CHAPTER REPEAT ON The current chapter is repeated. · TITLE REPEAT ON The current title is repeated. · REPEAT OFF The repeat function is switched off. VCD/CD Functions · REP-ON The current track is repeated. · REP-ALL All tracks of the inserted disc will be repeated. · REP-OFF The repeat function is switched off. ohmd 102 17 3/16/05, 6:35 AM English O H1 0 2 MD 17 BASIC OPERATIONS Press the DISP button during playback to display different time information on the screen of the disc that is playing. DVD · Press the DISP button once the following information will be shown on the screen. TITLE 02 / 05 01 : 14 : 39 CHAPTER 001 / 027 Current title number and total number of titles. Current chapter number and total number of chapters, and elapsed total time. Press DISP button again. TITLE REMAIN 01 : 14 : 39 Press DISP button for a third time. CHAPTER ELAPSED 00 : 12 : 24 18 ohmd 102 18 3/16/05, 6:35 AM English O H1 0 2 MD Time Display Functions BASIC OPERATIONS OHMD102 CHAPTER ELAPSED 00 : 12 : 24 Press DISP button for the fifth time: The message on the screen will be cleared. CD/VCD Functions Each time the DISP button is pressed, the time displayed changes in the following order: · SINGLE ELAPSED (track/chapter) · SINGLE REMAIN (track/chapter) · TOTAL ELAPSED (CD) · TOTAL REMAIN (CD) · OFF MP3 Functions Each time the DISP button is pressed, the time displayed changes in the following order: · CHAPTER ELAPSED · CHAPTER REMAIN MENU button · Press the MENU button during playback. The basic menu of the DVD is displayed. If different menu options are available, move the cursor to the desired menu option with the cursor buttons or · Confirm your selection by pressing the ENTER button. ohmd 102 19 3/16/05, 6:35 AM English O H1 0 2 MD 19 Press DISP button for a fourth time. BASIC OPERATIONS If the DVD has multiple titles recorded, you can select the preferred title from the title menu to start playback. · Press the TITLE button during playback. · The title menu is displayed. · Move the cursor to the desired title with the cursor buttons or · Confirm your selection by pressing the ENTER button. English O H1 0 2 MD Title Button Selecting Audio Language DVD: · Press the AUDIO button once or more than once during playback to select the desired audio sound track language. Notes: The number of audio languages is dependent on the inserted DVD. Some DVDs only contain one audio language. If the inserted DVD only contains one audio language, a hand icon will appear in the left top corner of the screen when pressing the AUDIO button. VCD/CD · Press the AUDIO button once or more than once during playback to select between the following modes: · Stereo (L & R) · L only · R only Selecting Subtitle Language (DVD only) Press the SUBTITLE button once or several times during playback to select the required language for subtitles. Notes: The number of subtitle languages is dependent on the inserted DVD. Some discs only contain one subtitle language. If only one language is available on the disc "SUBTITLE OFF" will appear in the left top corner of the screen when pressing the SUBTITLE button. 20 ohmd 102 20 3/16/05, 6:35 AM BASIC OPERATIONS OHMD102 Press the ZOOM button once or several times during playback to select the required amount of zoom. The zoom selection will be in the following order · OFF >1.5X >2X >3X >OFF. Selecting the Viewing Angle (DVD only) When the ANGLE MARK (camera angle) function is activated, the symbol is displayed on the screen when a scene with alternative camera angles is played from a DVD. · Press the ANGLE button once or several times while the symbol is displayed to select the various camera angles. Notes: This function only works with discs having scenes recorded at different angles. The number of viewing angles depends on the individual DVD. To activate ANGLE MARK see General settings. MP3 Disc Playback This player supports the following CD formats for MP3 playback: · Joliet · Romeo · ISO966019 ohmd 102 21 3/16/05, 6:35 AM English O H1 0 2 MD 21 Zoom (magnification)