VDH9600 OWNER'S MANUAL/INSTALLATION GUIDE WARNING! THE CLARION VDH9600 VIDEOCASSETTE PLAYER IS DESIGNED FOR REAR SEAT VIEWING OF VIDEOCASSETTES ONLY. THIS PRODUCT IS NOT INTENDED FOR VIEWING BY THE DRIVER WHILE THE VEHICLE IS IN MOTION SINCE SUCH USE MAY DISTRACT THE DRIVER OR INTERFERE WITH THE DRIVER'S SAFE OPERATION OF THE VEHICLE AND MAY RESULT IN SERIOUS INJURY OR DEATH. SUCH USE MAY ALSO VIOLATE STATE LAW. CLARION DISCLAIMS ANY LIABILITY FOR ANY BODILY INJURY, INCLUDING FATALITIES, OR PROPERTY DAMAGE THAT MAY RESULT FROM ANY IMPROPER OR UNINTENDED USES OF THIS PRODUCT. If you do not have the required knowledge and experience to successfully complete the installation, we strongly recommend consulting an authorized Clarion Pro Audio dealer about professional installation options. TABLE OF CONTENTS Introduction...............................................................2 Precautions And Videocassette Use............................3 Description Of Controls And Indicators.......................5 Description Of Connectors..........................................7 Description Of Remote Control ...................................8 Dew/Heat Sensor Operation .....................................9 Head Cleaning...........................................................9 Description Of On-Screen Programming...................10 Operating The VDH9600 .........................................12 Installation And Wiring............................................14 Troubleshooting ......................................................16 Specifications ..........................................................17 FCC Statement .........................................................17 ABOUT INSTALLATION Installation of mobile audio and video components requires experience with a variety of mechanical and electrical procedures. Even though this manual provides general installation and operation instructions for your new Clarion VDH9600 Videocassette Player/Recorder, it does not show the exact installation methods for your particular vehicle. VDH9600 VIDEOCASSETTE PLAYER/RECORDER INTRODUCTION · 2-speed playback of SP and SLP videocassettes · Diamond Laser Coated (DLC) tape head drum for extended head durability and lessened tape wear · 2-step forward/reverse picture search for quick location of a desired video segment at 5- or 7-times SP speed · Repeat Play function · Dew/Heat sensor to warn of condensation and high internal temperatures About The Manual And Warranty The Clarion VDH9600 is a full-featured VHS videocassette player/recorder specifically created for the mobile environment. It is designed to work through Clarion Multimedia devices and ClarionVideo Monitors for a complete video solution for your vehicle. The VDH9600 includes the following features: · 4-head VHS Hi-Fi stereo system for high-quality playback of NTSC video and near CD-quality audio tracks · Microprocessor-based, full electronic-logic control system with feather-light push-button operation · Motorized front-loading system for fast videocassette loading and removal · Built-in 12 Vdc operation only ­ eliminates need to convert power supply for mobile use · Rear-mounted RCA outputs and input jacks for standard connections to your mobile multimedia system · Infrared Remote Control and Remote Eye Sensor standard for convenient wireless operation 2 To start enjoying your new Clarion VDH9600, please read the remaining instructions listed in this manual. Keep all instructions for future reference. This product is covered by a limited warranty (see the enclosed warranty card). Save the sales receipt to protect your purchase and aid in warranty service. OWNER'S MANUAL/INSTALLATION GUIDE PRECAUTIONS AND VIDEOCASSETTE USE Installation Precautions · This unit operates on an automotive 12-volt negative ground power source and requires additional mobile audio and video components for proper operation. · Before installation, disconnect the (­) negative lead from the vehicle's battery. · Use only supplied screws and hardware. Make sure all connections and components are fastened securely. · At the proposed installation site, make sure there is adequate space to accommodate the unit's dimensions (and mounting brackets) and provide adequate ventilation (see Installation on page 14). · Use extreme caution when drilling around electrical wiring, brake lines, and fuel lines. Check clearances on both sides of a planned installation surface before drilling any holes or installing any screws. Always wear protective eyewear when using power tools. · Use only high-quality RCA cables that are no longer than necessary for direct connections to other components in the system. Extra-length audio and video cables can cause signal loss and act as an "antenna" for noise. · When routing RCA cables, keep them away from power cables and output speaker wires. · If a fuse needs replacement, use the same value as the original. Do not substitute another rating. Operation Precautions · Do not allow liquids or foreign objects to enter the unit or remote control. · If the unit or remote control should become wet, turn off all power and let your authorized Clarion Pro Audio dealer clean or service the equipment. DO NOT ATTEMPT TO OPEN OR SERVICE THE UNIT OR REMOTE CONTROL. THE INTERNAL PARTS ARE NOT USER-SERVICEABLE. DOING SO WILL VOID THE WARRANTY. VDH9600 VIDEOCASSETTE PLAYER/RECORDER · Do not force a videocassette upside down into the unit. · Do not place heavy objects on the unit or remote control. · Do not drop or excessively jar the unit or remote control. · Do not use liquid cleaners on any surfaces. Only use a soft (cotton or other non-static) cloth to wipe off fingerprints or other imprints from the faceplate or remote control. · Do not subject the unit to direct sunlight or an extremely hot environment (e.g., closed windows on a hot summer day, direct path of heater vent, etc.). · Avoid using the unit under the following conditions: ­ After extended parking on an extremely hot or cold day ­ Near strong magnetic fields ­ In an environment with excessive humidity, dust, or vibration (e.g., off-road travel, etc.) · If the unit has accumulated moisture condensation (e.g., after parking the vehicle outside overnight), allow the unit to automatically remove it through a built-in Dew/Heat Sensor circuit before attempting to play a videocassette. See Dew/Heat Sensor Operation on page 9. 4 Videocassette Use · Use only VHS-type (T-30, T-60, or T-120) videocassettes. · Do not repeatedly load or unload a videocassette without interim playback; doing so may cause the tape to slack and become damaged. · Do not directly touch the magnetic tape surface. · Do not disassemble a videocassette. · Avoid exposing a videocassette to direct sunlight and keep it away from heat sources (e.g., heater vent). · Avoid extreme environments such as high humidity, excessive vibrations or jarring, strong magnetic fields (e.g., speaker magnet, etc.) and dust. · Always place a videocassette back in its case after use. OWNER'S MANUAL/INSTALLATION GUIDE DESCRIPTION OF CONTROLS AND INDICATORS Figure 1. The VDH9600's and IR Remote controls and indicators (see descriptions on the next page). VDH9600 VIDEOCASSETTE PLAYER/RECORDER 1 POWER Button Press to power the unit ON or OFF. 0 PLAY Button Press button to play the videocassette. 2 EJECT Button Press to eject a videocassette from the compartment. q FF Button Press FF to fast forward the tape. If PLAY is engaged, press FF to forward search for a desired video segment. 3 CASSETTE Compartment Insert a videocassette which automatically loads the tape. w REW Button Press REW to rewind the tape. If PLAY is engaged, press REW to reverse search for a desired video segment. 4 RECORD Button Engages the RECORD mode. 5 POWER Indicator Illuminates when the player is powered up. e TRACK DOWN Button When a cassette is inserted, the player automatically adjusts the tracking. If manual adjustment is required, press the button to adjust for jitter free still frames. r TRACK UP Button When a cassette is inserted, the player automatically adjusts the tracking. If manual adjustment is required, press the button to adjust for jitter free still frames. 6 RECORD Indicator Illuminates when RECORD mode is ON. 7 DEW/HEAT Indicator When illuminated and flashing the PLAY mode is disabled. Press the EJECT function to remove the internal cassette to prevent damage. See page 9 8 Remote IR Sensor opening Allows the IR to function through the front of the player. t STILL/SLOW Button Press to view a single frame. Hold down the button to slow search for a desired video segment frame by frame. 9 STOP Button Press to stop any play, fast forward, or rewind mode. 6 OWNER'S MANUAL/INSTALLATION GUIDE DESCRIPTION OF CONNECTORS i STEREO L/R INPUT (RCA Jacks) Use a stereo RCA audio cable (not supplied) to connect stereo audio from an alternate A/V source to record using the VDH9600. o VIDEO INPUT (RCA Jack) Use an RCA video cable (not supplied) to connect video signals from an alternate A/V source to record using the VDH9600. p DC IN 12V (4-Pin Molex) Use the supplied dc power cord (with cigarette lighter end) to connect the VDH9600 to the vehicle's 12-volt electrical system. Figure 2. The VDH9600's rear connections. y STEREO L/R OUTPUT (RCA Jacks) Use a stereo RCA audio cable (not supplied) to connect stereo audio from the VDH9600 to the Video Tuner or A/V source switcher. a REMOTE SENSOR INPUT (3.5 mm Plug) Install and connect the remote mount IR Sensor (included) to the back of the VDH9600 when the player is hidden away or mounted under a seat. u VIDEO OUT (RCA Jack) Use an RCA video cable (not supplied) to connect video from the VDH9600 to the Video Tuner, Monitor, or A/V source switcher. VDH9600 VIDEOCASSETTE PLAYER/RECORDER DESCRIPTION OF REMOTE CONTROL 3. Slide the battery holder back into the remote until it locks with a "click". Description of Remote Eye The VDH9600 is supplied with a Remote Eye sensor which allows you to access all the features on the credit card sized Remote Control when the VDH9600 is mounted in another location away from the front panel sensor opening. Simply plug the sensor cable into the rear of the VDH9600. Run the sensor and cable to the front of the vehicle and mount the sensor in a convient location. NOTE: The IR sensor mounted in some Clarion monitors, such as the VMA6491, can be connected directly to the remote sensor input to function as the remote eye for the system. (See page 15) Figure 3. Battery Installation of VDH9600's Remote Control. Inserting Battery Into The IR Remote Control 1. Locate the battery compartment on the back of the IR Remote Control. 2. Remove the battery holder and insert one CR2025 battery (supplied), matching polarity as shown on the battery holder (positive side up). 8 Figure 4. VDH9600 Remote Eye. OWNER'S MANUAL/INSTALLATION GUIDE Using The IR Remote Control Inside the vehicle, simply aim the Remote Control directly at the VDH9600's faceplate and press any desired button. When direct line of sight is impossible, install the remote mount IR sensor in the front of the vehicle. For best results, also note the following: · Aim the Remote Control from no further than 7 feet away and no more than 3 feet on either side of the VDH9600 faceplate or remote mount sensor. · Direct sunlight or very bright light will reduce sensitivity to remote signal commands. Be sure the remote sensor is not located in direct sunlight. · Objects between the VDH9600 faceplate or the remote mounted IR sensor will interfere or block IR remote signal commands. DEW/HEAT SENSOR OPERATION inhibit the drive section to avoid damaging heads due to sticking tape or high internal temperatures that can cause tape damage. The unit will be powered on, but it will not accept a videocassette. NOTE: If a videocassette was left in the VDH9600, press EJECT to avoid damaging the tape during this procedure. If moisture is the problem, leave the power on so the unit can warm up and dry any accumulated moisture. When the Dew/Heat Indicator stops flashing, the unit will return to full operation. HEAD CLEANING The VDH9600 is equipped with a built-in Dew/Heat circuit that automatically detects for moisture condensation and internal temperature. When activated, the DEW/HEAT Indicator will flash red and the Dew/Heat Sensor circuit will Over time the picture may become blurred, interrupted, or noisy. Probably dirt has accumulated on the video heads and the unit will require cleaning. You can verify this symptom by playing several different videocassettes. If the problem is the same, then the heads need to be cleaned. Please consult your nearest Clarion Pro Audio dealer for recommendations on cleaning products and service. VDH9600 VIDEOCASSETTE PLAYER/RECORDER DESCRIPTION OF ON-SCREEN PROGRAMMING ** MAIN MENU ** RECORD SPEED --------- (SP) REPEAT PLAY ...