User manual COBRA ESD9110

Operating Instructions for Your Cobra® 10 BandTM Extra Sensory Detection® DETECTOR MODEL E S D ­ 9 1 1 0 RADAR/LASER Nothing comes close to a CobraTM DETECTOR MODEL E S D ­ 9 1 1 0 RADAR/LASER Congratulations You've made a smart choice by purchasing the ESD-9110 radar/laser detector from Cobra.® Just look at some of the sophisticated features and capabilities your new unit includes: · Detects and provides separate alerts for: radar signals (X, K, and Ka bands, with signal strength indicated) laser signals emergency vehicle safety and strobe alert signals VG-2 signals · LASEREYE® for 360° detection of laser and strobe signals · "INSTANT-ON" speed monitoring detection · TONE ALERTS with adjustable volume · ULTRABRIGHTTM DATA DISPLAY is easy-to-read with adjustable brightness · CITY or HIGHWAY modes to reduce false alerts · SAFETY ALERT ® Traffic Warning System · STROBE ALERTTM · MANUAL MUTE or AUTO MUTE of audio alerts · SMARTMUTETM a mute function which automatically reduces false alerts by sensing engine RPMs · Distinguishes important safety alerts, from other K band signals · Mounts easily on windshield or dashboard This booklet describes the simple steps for mounting and setting up your ESD-9110. It also provides helpful information about how radar and laser guns are used and how you can interpret the alerts you receive. 12V DC POWER JACK ON-OFF/VOLUME control allows you to adjust the volume of the TONE alerts. SMARTMUTETM engine RPM-sensing mute function which reduces false alerts. Button turns SmartMuteTM on and off. (Also sets rev point. ) * MUTE button for MANUAL MUTE or AUTO MUTE of audio alerts. LASEREYE ® for 360° detection of laser and strobe signals. 12V DC POWER JACK ON-OFF/VOLUME control SPEAKER CITY button for CITY or HIGHWAY modes to reduce false alerts. X K Ka V S signal strength, laser and CITY/HIGHWAY mode indicators windshield bracket mount DIM button allows you to adjust the UltraBrightTM Data Display brightness for easy reading. (Also turns VG-2 Alert® on and off.*) radar, VG-2 and safety/strobe indicators SmartMuteTM indicator *Press and hold for 2 seconds to access these functions Important Information Important information about... Table of Contents Security of Your Vehicle Federal Laws, Safety Alert ® /Strobe AlertTM Safe Driving, , Security of Your Vehicle, Customer Support.................................................................................. A1 Installation .................................................................................................................................. 2-4 Operation­Getting Started ............................................................................................................ 5 Operation­Settings ...................................................................................................................... 6-12 Highway/City Mode ................................................................................................................ 6 UltraBrightTM Data Display Brightness .......................................................................................... 7 Muting an Alert ...................................................................................................................... 8 Auto Mute Mode .................................................................................................................... 8 SmartMuteTM............................................................................................................................ 9-11 VG-2 Alert ® Audio Setting ........................................................................................................ 12 Detection .................................................................................................................................... 13-16 Signals Detected .................................................................................................................... 13 Audio Alerts ............................................................................................................................ 13 Visual Display ........................................................................................................................ 13-15 Instant-On Detection ................................................................................................................ 16 Responding to Alerts ................................................................................................................ 16 Understanding Radar and Laser ...................................................................................................... 17-19 Maintenance and Service .............................................................................................................. 20-21 Limited 1-Year Warranty ................................................................................................................ 22 Specifications .............................................................................................................................. 23 Optional Accessories .................................................................................................................... 24 Order Form .................................................................................................................................. 25 Important information about... Federal Laws Governing the Use of Radar Detectors It is not against federal law to receive radar transmissions with your Cobra® radar detector. The Communications Act of 1924 guarantees your right to receive radio transmissions on any frequency. Local laws that contravene this Act, while illegal, may be enforced by your local law enforcement officials until and unless they are prohibited from doing so by federal court action. Safety Alert® Before leaving your vehicle, always remember to conceal your radar detector in order to reduce the possibility of break-in and theft. Customer Support In this user's manual, you should find all the information you need to install and operate your ESD-9110. If you require further assistance after reading through this manual, Cobra® Electronics offers the following customer support services: Automated Help Desk is available 24 hours a day, 7 days a week at 773-889-3087. Customer Service Operators are available at 773-889-3087 Monday through Friday, 8:00 a.m. to 6:00 p.m. CST. Questions can be faxed to 773-622-2269. Automated Technical Assistance is available 24 hours, 7 days a week via e-mail at: productinfo@cobra.com On-line answers to frequently asked questions can be found at: www.cobra.com. Use of this product is not intended to, and does not, ensure that motorists or passengers will not be involved in traffic accidents. It is only intended to alert the motorist that an emergency vehicle equipped with a Cobra® Safety Alert ® transmitter is within range as defined by that product. Please call local fire and police departments to learn if coverage exists in your area. Safe Driving Motorists, as well as operators of emergency or service vehicles, are expected to exercise all due caution while using this product, and to obey all applicable traffic laws. A1 WARNING Modifications or parts substitutions not approved by Cobra Electronics Corporation may violate FCC Rules and void your authority to operate this equipment. 1 I N S TA L L AT I O N I N S TA L L AT I O N 1 Where to Mount Your Unit You will get optimum performance from your ESD-9110 if you mount it at a point approximately in the center of the vehicle, as low as possible on the front windshield without obstructing the unit's view of the road either to the front or rear. You can also mount it directly on the dashboard. Radar and laser signals pass through glass but not through other materials and objects. Objects that can block or weaken incoming signals include: windshield wiper blades mirrored sun screens dark tinting at the top of the windshield heated windshields currently available on some vehicles (Instaclear for Ford,® ® Electriclear for GM, consult your dealer to see if you have this option) Windshield Mounting 1. Attach the rubber cups to the bracket. 5. To adjust the angle if necessary, gently push or pull on the bracket to bend it. DO NOT use the detector to bend the bracket. 2. Make sure the rubber cups and your windshield are clean. 3. Push the bracket firmly onto the windshield. 6. Plug the power cord into the detector. Windshield mounting Dashboard mounting The unit's lenses must not be blocked and the LaserEye® should have a clear view out the back window to allow 360° detection. 4. Attach the detector to the bracket. Check the angle of the unit. 7. Plug the cigarette lighter adapter on the power cord into your vehicle's cigarette lighter. 8. You can temporarily remove the detector whenever you wish by sliding it off of the bracket. 2 Instaclear for Ford ® is a registered trademark of Ford Motor Company, Inc. Electriclear for GM ® is a registered trademark of General Motors Corporation. 3 1 I N S TA L L AT I O N O P E R AT I O N · G E T T I N G S TA R T E D 2 Dashboard Mounting 1. Place the detector on the dashboard to find a location where the unit has a clear, level view of the road. The angle can NOT be adjusted after mounting. 2. Remove the paper backing from one side of the hook-and-loop fastener. 4. Attach the detector to the hook-and-loop fastener. You can remove and reattach the unit as often as you like. 1. Turn on the unit and adjust audio volume by rotating the ON-OFF/VOLUME CONTROL DIAL clockwise (away from you). 2. You will hear 3 beeps and the letter "h" will appear in the display indicating that the power is on. X K Ka V S 5. Plug the power cord into the detector. NOTE: In some vehicles, power is supplied to the cigarette lighter even while the ignition is off. If this is the case with your vehicle, you should turn off or unplug your ESD-9110 when parking for lengthy periods. 3. Attach the pad to the dashboard at your chosen location and remove the other paper backing. 6. Plug the cigarette lighter adapter on the power cord into your vehicle's cigarette lighter. 4 5 3 O P E R AT I O N · S E T T I N G S O P E R AT I O N · S E T T I N G S 3 When changing the settings on your ESD-9110, please keep in mind: · Buttons can have multiple functions. · All settings will be stored in memory when the power is turned off and recalled when the power is turned back on. signals such as microwave towers and automatic door openers. To change settings, follow the procedure in the table below, which indicates what you will see and hear as you complete each step. The factory setting is Highway mode. CITY button UltraBrightTM Data Display Brightness You can choose from three settings for brightness of the display. You can cycle through the settings by repeatedly pushing the DIM button The factory setting is Bright. Highway/City Mode Setting your ESD-9110 to City mode delays all X band audio alerts until the signal strength reaches level 3. (A single beep will sound when the signal is first detected.) This will reduce false alerts while you are driving in or near urban areas where there are many sources for conflicting X band Procedure Tone 1 beep appears in the display 2 beeps appears in the display Press and release Bright RELEASE SS AND PRE IM BUTTON D PRESS AN DIM BU D RELE TTO AS N Dark DIM button Visual Display Procedure Tone 1 beep Press and release EA REL N PRESS ANDUTTO MB DI To change from Highway mode to City mode To change from City mode back to Highway mode Press and release the CITY button. Press and release the CITY button again. Visual Display Display dims To change the brightness to Dim To change the brightness to Dark Highway mode Press and release the DIM button once. Press and release the DIM button again. Press and release the DIM button a third time. 1 beep Display remains dim (No visual alerts will be seen) Display returns to full brightness X K Ka V S City mode X K Ka V S To change the brightness to Bright 2 beeps SE E Dim 6 7 3 O P E R AT I O N · S E T T I N G S O P E R AT I O N · S E T T I N G S 3 Muting an Alert Your ESD-9110 allows you to quickly turn off an audio alert by momentarily pressing the MUTE button. If you press the MUTE button a second time during the alert, the audio alert will be turned back on. Auto Mute Mode Auto Mute will automatically reduce the audio volume of all alerts after 4 seconds for as long as the signal is detected. The factory setting for Auto Mute is ON. SmartMuteTM SmartMuteTM is a unique new feature of the ESD-9110 that allows you to avoid alerts you don't need to hear because you are stopped or moving slowly. By sensing the "revs" (RPMs) of your engine, SmartMuteTM knows when you are at low speed and automatically mutes alerts (except for strobe signals from emergency vehicles). Before SmartMuteTM will work, you must set an activation point for your engine's revs (see page 11). Whenever the revs are below that point, SmartMuteTM will begin muting. The activation point will be stored in memory and recalled each time the power is turned on. The factory setting is SmartMuteTM OFF. NOTE: SmartMuteTM may not work with some vehicles because it cannot sense the engine's revs. In such cases, you can reduce unwanted audio alerts by using Auto Mute and City mode when appropriate. MUTE button Press and release SMARTMUTETM button Press and release Procedure Tone 1 beep Visual Display none Procedure Tone 2 beeps Visual Display dot appears next to the large character on the right none To turn Auto Mute off To turn Auto Mute on Press and release the MUTE button while no alert is occurring. Press and release the MUTE button again while no alert is occurring. To turn SmartMuteTM on To turn SmartMuteTM off Press and release the SMARTMUTETM button. Press and release the SMARTMUTETM button again. 2 beeps 1 beep none X K Ka V S 8 9 3 O P E R AT I O N · S E T T I N G S O P E R AT I O N · S E T T I N G S 3 What to Remember While Using SmartMuteTM SmartMuteTM works with both City and Auto Mute modes. Whenever your engine revs are below the activation point, the dot next to the large character on the right side of the display will remain lit. Above the activation point, the dot will blink twice every 2 seconds. If, for any reason, the unit stops sensing your engine's revs, SmartMuteTM will indicate an error and automatically turn off. The rev point you set will be stored in the unit's memory when power is turned off, and recalled each time the power is turned on. The rev point must be reset if you use your ESD-9110 in a different vehicle. Important: When initially choosing your SmartMuteTM activation point, a setting of approximately 300 to 600 RPMs above idle is recommended. You can reset the activation point at any time to fit your individual preferences and driving style. Setting the SmartMuteTM Activation Point Your ESD-9110 must be installed in your vehicle. Caution: Do not attempt to set the rev point while driving. Your vehicle should be parked and idling. SmartMuteTM must be turned on. You will hear a series of beeps as you follow these steps: 1. Procedure Press and hold the SMARTMUTETM button for 2 seconds. Tone 2 beeps Visual Display none X K Ka V S 2. Procedure Rev your engine to the level you wish to set. Rev the engine slightly above idle and hold revs steady for 2 seconds. NOTE: If the unit is unable to sense usable pulses within three seconds, SmartMuteTM will indicate an error and automatically turn off. Tone none Visual Display three bars flash in succession 1 2 3 Tone 1 beep Visual Display appears 3. Procedure At the desired rev level, press and release the SMARTMUTETM button. NOTE: If you do not set a rev point within 20 seconds of beginning these steps, SmartMuteTM will indicate an error and automatically turn off. Tone 3 beeps Visual Display all three bars flash three times Tone 1 beep Visual Display appears 10 11 3 O P E R AT I O N · S E T T I N G S ® DETECTION 4 VG-2 Alert Audio Setting The ESD-9110 is undetectable by police VG-2 detection devices, and will alert you when such a device is in use near your vehicle. During the alert, the unit continues to detect other signals. You can choose whether or not you want your unit to sound VG-2 alerts. The factory setting is VG-2 Audio On. DIM button Press and hold for 2 seconds Signals Detected The tables on the following pages show you the types of signals your ESD-9110 will detect, as well as the visual alerts it provides for each one. During laser alerts the letter "L" will appear, instead of the signal strength indication. X K Ka V S Audio Alerts A distinctly different alert tone is used for each type of signal detected (including separate tones for each laser signal). For X, K, and Ka band radar signals, the tones will repeat faster as you approach the signal source. The repeat rate of the tones gives you useful information about the signal detected. (See Responding to Alerts, page 16.) During VG-2 Alert ® the letter "V" will appear. X K Ka V S During Safety Alert® and Strobe AlertTM the letter "S" will appear. X K Ka V S Procedure Tone 1 beep Visual Display V will blink once in the display To turn off VG-2 audio alert While no signal is being detected, press and hold the DIM button for two seconds. While no signal is being detected, press and hold the DIM button for two seconds again. Visual Display An indication of the type of signal detected will appear in the UltraBrightTM Data Display. During X, K and Ka alerts, a number will also appear, indicating the strength of the signal detected. (1 = weakest, 5 = strongest) X K Ka V S To turn on VG-2 audio alert 2 beeps V will blink twice in the display. X K Ka V S X K Ka V S X K Ka V S 12 13 4 DETECTION Type of Signal Radar X band radar K band radar Ka band radar Visual Display X plus signal strength K plus signal strength Ka plus signal strength Safety Alert ® DETECTION 4 Type of Signal emergency vehicles road hazards trains Visual Display S S S X K Ka V S X K Ka V S X K Ka V S PLEASE NOTE: There are different tones for each Safety Alert ® X K Ka V S Type of Signal Laser* LTI 20-20TM* LTI Ultra-LyteTM* Kustom Signals ProLaserTM* Kustom Signals ProLaser IIITM* Visual Display L L L L Type of Signal VG-2 Alert ® Visual Display V Interceptor VG-2TM PLEASE NOTE: Beep rate changes with different laser alerts Type of Signal Strobe AlertTM* 3M OpticomTM or Tomar® X K Ka V S X K Ka V S Visual Display S X K Ka V S 20-20TM and Ultra-LyteTM are trademarks of Laser Technology, Inc. ProLaserTM and ProLaser IIITM are trademarks of Kustom Signals, Inc. 10 BandTM, Strobe AlertTM and SmartMuteTM are trademarks of Cobra Electronics Corporation. * your ESD-9110 provides LaserEye® 360° detection of these signals OpticomTM is a trademark of 3M Corporation. Tomar ® is a registered trademark of TOMAR Electronics, Inc Interceptor VG-2TM is a trademark of TechniSonic Industries LTD. 14 Safety Alert ® Traffic Warning System, VG-2 Alert ® and LaserEye ® are registered trademarks of Cobra Electronics Corporation. 15 4 DETECTION U N D E R S TA N D I N G R A D A R & L A S E R 5 Instant-On Detection Your ESD-9110 is designed to detect instant-on speed monitoring signals, which can suddenly appear at full strength. You should take appropriate action immediately whenever an alert is given. Radar Speed Monitoring Systems Three band frequencies have been approved by the Federal Communications Commission (FCC) for use by speed monitoring radar equipment: X band 10.525 GHz K band 24.150 GHz Ka band 33.400-36.00 GHz emergency vehicle or train, or a stationary road hazard. Because these microwave signals are within the K band frequency, most conventional radar detectors will detect Safety Alert ® signals as standard K band radar. Your ESD-9110, however, is designed to differentiate between standard K band and Safety Alert ® signals, and give separate alerts for each. Safety Alert ® technology is relatively new. Safety Alert ® transmitters can be found in limited numbers in all 50 states, but the number is growing. Depending on your location, you may not receive these alerts regularly and may often encounter emergency vehicles, trains, and road hazards without being alerted. As the number of transmitters increases, these alerts will become more common. When you receive such an alert, please watch for emergency vehicles ahead of you, on cross streets, and behind you. If you see an emergency vehicle approaching, please pull over to the right side of the road and allow it to pass. 17 Responding To Alerts Description tone repeats slowly at first, then speeds up rapidly tone sounds one time only tone instantly begins repeating rapidly tone repeats slowly as you approach a hill or bridge, then speeds up sharply as you reach it tone repeats slowly for a short period any type of laser alert any Safety Alert ® or Strobe AlertTM Interpretation probably police radar probably a false alarm, but possibly pulsed radar radar or VG-2 nearby has been activated suddenly probably police radar beyond the hill or bridge probably a false alarm laser alerts are never false alarms you are nearing an emergency vehicle, railroad crossing, or road hazard (construction, accident, etc.) Recommended Response FULL ALERT exercise caution FULL ALERT FULL ALERT Your ESD-9110 detects signals in all three radar bands. VG-2 VG-2 is a "detector detector" that works by detecting low-level signals emitted by most radar detectors. Your ESD-9110 does not emit signals that can be detected by VG-2, but does detect VG-2 signals and will alert you when a device is in use near your vehicle. exercise caution FULL ALERT exercise caution Safety Alert® Traffic Warning System FCC- approved Safety Alert ® transmitters emit microwave radar signals that indicate the presence of a safety-related concern. Depending on the frequency of the signal emitted, it can indicate a speeding 16 5 U N D E R S TA N D I N G R A D A R & L A S E R U N D E R S TA N D I N G R A D A R & L A S E R 5 Strobe AlertTM Special strobes mounted on the light bars of authorized emergency vehicles (fire trucks, police cars, ambulances) automatically change traffic signals as the vehicle approaches an intersection. These strobes and the special strobe detectors located on the traffic signals, introduced fairly recently by 3M and Tomar, are already in use in more than 1000 cities nationwide. Cobra's exclusive Strobe AlertTM detector will detect these special strobes and give an Emergency Vehicle alert. When you receive such an alert, please watch for an approaching emergency vehicle and pull over to allow it to pass. To inquire about coverage in your area, contact your local fire and police departments. LIDAR (laser) The correct name for the technology that most people refer to as laser is actually LIDAR, which stands for Light Detection and Ranging. LIDAR operates much like radar. Its signal spreads out like a radar signal, though not as quickly. Unlike radar, LIDAR must have a clear line of sight to its target vehicle throughout the entire measurement interval. Obstructions such as sign posts, utility poles, tree branches, etc., will prevent valid speed measurement. Some common questions about LIDAR include: Does weather have any affect on LIDAR? Yes. Rain, snow, smoke, fog, or airborne dust particles will reduce the effective range of LIDAR and can, if dense enough, prevent its operation. Can LIDAR operate while in motion? No. Because LIDAR operates by line of sight, the person using it cannot drive the vehicle, aim, and operate the gun all at the same time. Is LIDAR legal to use? Can LIDAR operate through glass? Yes. It is legal in all 50 states. Yes. Newer LIDAR guns can obtain readings through most types of glass. However, the laser pulse also can be received through glass to trigger an alarm by your ESD-9110. 18 19 6 MAINTENANCE & SERVICE MAINTENANCE & SERVICE 6 Maintenance of Your Radar Detector Your ESD-9110 is designed and built to give you years of trouble-free performance without the need for service. No routine maintenance is required. If your unit does not appear to be operating properly, please follow these troubleshooting steps: Make sure the power cord is properly connected. Make sure the socket of your vehicle's cigarette lighter is clean and free of corrosion. Make sure the power cord's cigarette lighter adapter is firmly seated in your cigarette lighter. Check the power cord fuse. (Unscrew the ribbed end cap of the cigarette lighter adapter and examine the fuse. If required, replace it with a 1-amp fuse only.) Service You can receive technical assistance with your unit through one of our customer support services: Automated Help Desk is available 24 hours a day, 7 days a week at 773-889-3087. Customer Service Operators are available at 773-889-3087 Monday through Friday, 8:00 a.m. to 6:00 p.m. CST. Questions can be faxed to 773-622-2269. Automated Technical Assistance is available 24 hours, 7 days a week via e-mail at: productinfo@cobra.com On-line answers to frequently asked questions can be found at: www.cobra.com. If you suspect that your unit requires service, please call 773-889-3087 BEFORE shipping it to Cobra.® This will ensure that you receive service as quickly as possible. If you are asked to send your unit to the Cobra® factory, please follow these steps: 1. Send the complete unit, including power cord. (It is not necessary to include the mounting bracket.) 2. For warranty repair, enclose some form of proof-of-purchase, such as a photocopy or carbon copy of a sales receipt. If you send the original receipt, it cannot be returned. 3. Enclose a typed or clearly written description of the problem you are having with your unit, plus the name and address where you want the unit returned. 4. Pack the unit securely to prevent damage during transit. If possible, use the original packing materials. 5. Ship prepaid and insured using a traceable carrier such as United Parcel Service (UPS), Federal Express, or first class mail with delivery confirmation. Ship to: Cobra Factory Service Cobra Electronics Corporation 6500 West Cortland Street Chicago, IL 60707 USA 6. Please allow 3 to 4 weeks before contacting us about the status of your service. Call 773-889-3087 for assistance. If your unit is under warranty, it will either be repaired or replaced upon receipt, depending on the model. If your unit is out of warranty, you will receive a letter informing you of the repair or replacement charge. 20 21 7 WA R R A N T Y S P E C I F I C AT I O N S 1 Ye Wa ar rra 8 QUALITY SEAL Cobra Electronics Corporation 6500 West Cortland Street, Chicago, Illinois 60707 www.cobra.com QUALITY SEAL nty COBRA ELECTRONICS CORPORATION warrants that its Cobra® 10 BandTM Radar/Laser Detectors, and the component parts thereof, will be free of defects in workmanship and materials for period of one (1) year from the date of first consumer purchase. This warranty may be enforced by the first consumer purchaser, provided that the product is utilized within the U.S.A. Cobra® will, without charge, repair or replace, at its option, defective 10 BandTM Radar/Laser Detectors, products or component parts upon delivery to the Cobra® Factory Service Department, accompanied by proof of the date of first consumer purchase, such as a duplicated copy of a sales receipt. You must pay any initial shipping charges required to ship the product for warranty service, but the return charges will be at Cobra's expense, if the product is repaired or replaced under warranty. This warranty gives you specific rights, and you may also have other rights which vary from state to state. 22 Exclusions: This limited warranty does not apply; 1) to any product damaged by accident; 2) in the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs; 3) if the serial number has been altered, defaced or removed; 4) if the owner of the product resides outside the U.S.A. All implied warranties, including warranties of merchantability and fitness for a particular purpose are limited in duration to the length of this warranty. Cobra® shall not be liable for any incidental, consequential or other damages; including, without limitation, damages resulting from loss of use or cost of installation. Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you. Band X band K band Safety Alert ® Traffic Warning System 10.525 24.125 24.070 24.110 24.190 24.230 Ka band Laser Strobe 34.700 910 700 Frequencies ± 0.050 ± 0.125 ± 0.010 ± 0.010 ± 0.010 ± 0.010 ± 1.300 ± 50 ± 300 GHz GHz GHz GHz GHz GHz GHz nm nm Unit Dimensions & Weight Dimensions Weight 3"W x 1 1/4"H x 4 1/4"D 140 grams This radar detector is covered by one or more of the following U.S. patents: 5,497,148; 5,594,432; 5,612,685; 6,078,279; 6,094,148. Additional patents may be listed inside the product or pending. 23 9 OPTIONAL ACCESSORIES ORDER FORM 10 You can find these fine accessories at your local Cobra® dealer. If you wish, you can order directly from Cobra.® To order by phone Call 773.889.3087 (Press 1 from the main menu 8 a.m.-6 p.m. M-F CST. ) To order by mail or fax Please fill out order form on next page, and mail/fax directly to Cobra.® To order online Go to www.cobra.com and click on "shop Cobra.®" Windshield Mounting Bracket Includes suction cups 545-139-N-001 Item # 420-030-N-001 420-026-N-001 545-139-N-001 CLP-2B Description Straight 12V Power Cord Curled 12V Power Cord Windshield Mounting Bracket Dual Port Power Adapter Cost Ea. Qty. Amount Prices subject to change without notice. Straight 12V DC Power Cord Includes plug and fuse 420-030-N-001 Tax Table Illinois residents add 8.75% Indiana residents add 5% Michigan residents add 6% Ohio residents add 5% Wisconsin residents add 5% Subtotal (Tax if applicable) Shipping/handling Total $4.00 For credit card orders fill out order form and fax to: 773.622.2269 or call 773.889.3087 (Press 1 from the main menu) 8:00 am - 6:00 pm, M-F, CST. Please print clearly Make check or money order payable to: Cobra Electronics 6500 West Cortland Street Chicago, IL 60707 USA Attn: Accessories Dept. To order online, please visit our website at: www.cobra.com and click "shop Cobra®" Name Address (No P.O. Box) City Zip Telephone ( ) Exp. Date MasterCard Discover State Dual Port Power Adapter Includes adjustable plug (upto 90°) and fuse CLP-2B 24 Curled 12V DC Power Cord Includes plug and fuse 420-026-N-001 Credit Card No. Circle One: Visa Customer Signature Allow 2-3 weeks for delivery. Offer valid in Continental U.S. only. 25 The Cobra® line of quality products includes: CB radios microTALK radios Radar/Laser Detectors Safety Alert Traffic Warning Systems Accessories HighGearTM Accessories For more information or to order any of our products, please visit our website: ® ® www.cobra.com Click "shop Cobra®" Nothing comes close to a CobraTM Printed in Korea Part No. 480-015-P ©2002 Cobra Electronics Corporation 6500 West Cortland Street Chicago, IL 60707 USA