COBY DVD228 IMPORTANT PLEASE READ! COMMON TROUBLESHOOTING ISSUES ISSUE #1 NO PICTURE Make sure your TV is turned to the correct Video line (AV Input/Video Input 1,2,3.etc). Consult the TV manufacture if you need help setting the TV to the correct Video line. If you are going through a cable box, contact your cable provider or the cable manufacture. Once your TV is turned to the correct video line, you should see the "COBY" logo. ISSUE #2 ROLLING, COLORLESS SCREEN The DVD has been set to the incorrect broadcast system. NTSC is for the United States TV broadcast system. On the remote, press the N/P button 2-3 times (make sure you do not have a disk in the tray) to select the correct broadcast system. ISSUE #3 NO SOUND Make sure the Red and White wire is connected into the L & R. Make sure the Red and White wire is connected into your TV "AUDIO IN". ISSUE #4 PICTURE FADES DARK TO LIGHT You cannot connect the DVD through your VCR or TV/VCR combo. If you cannot connect the DVD player directly into your TV then you will need to purchase an RF Modulator and a four-foot coaxial wire at your local electronics store. ISSUE #5 HAD PICTURE, NOW RECEIVING A BLACK OR BLUE SCREEN The DVD player may be set to Progressive Scan Mode. You will need to change the DVD player back to the Video Mode by using the remote control. Point the remote control directly at the DVD player, and then press the VIDEO/PSCAN button 2-3 times (make sure you do not have a disk in the tray). If you are still having difficulty setting up your new DVD player, please contact Customer Service or Technical Support, Monday-Friday 8:00 AM ­ 11:00 PM EST, Saturday and Sunday 9:00 AM ­ 5:30 PM EST. You can also reach us online at customerservice@cobyusa.com or techsupport@cobyusa.com 1-800-681-2629 OR 718-416-3197 ...