User manual COMPAQ MP1400

Notice © 2000 Compaq Computer Corporation. Compaq, the Compaq logo, and Deskpro are registered in the U. S. Patent and Trademark Office. Microsoft, Windows, and Windows NT are registered trademarks and Visual C++ is a trademark of Microsoft Corporation in the United States and/or other countries. All other product names mentioned herein may be trademarks or registered trademarks of their respective companies. Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information in this guide is subject to change without notice. This guide contains information protected by copyright. No part of this guide may be photocopied or reproduced in any form without prior written consent from Compaq Computer Corporation. The limited warranties for Compaq products are exclusively set forth in the documentation accompanying such products. Nothing herein should be construed as constituting a further or additional warranty. The software described in this guide is furnished under a license agreement or nondisclosure agreement. The software may be used or copied only in accordance with the terms of the agreement. User's Guide Compaq MP1400 Microportable Projector Second Edition (June 2000) Part Number 177284-002 Compaq Computer Corporation CONTENTS preface USING THIS GUIDE Symbols and Conventions.................................................................vi Warning Messages ...........................................................................vii Chapter 1 GETTING STARTED Product Features..............................................................................1-1 Introduction .....................................................................................1-2 Setting Up the Projector ..................................................................1-3 Balancing the Projector...............................................................1-5 Connecting the Projector to a Portable Computer ......................1-6 Connecting the Projector to a Desktop Computer ......................1-7 Connecting the Projector to a Compaq PC Companion .............1-9 Connecting the Projector to Other Video Sources....................1-10 Powering On the Projector ............................................................1-11 Powering Off the Projector ...........................................................1-12 Adjusting the Projected Image ......................................................1-13 Adjusting the Projector Height .................................................1-13 Adjusting the Projector Focus...................................................1-15 Image Size Adjustment .............................................................1-16 Using the Compaq Presentation Utility.........................................1-17 Using the Compaq Projector Display Assistant ............................1-18 Chapter 2 USING THE PROJECTOR Identifying the Projector Buttons ....................................................2-1 Introducing the On-Screen Menu....................................................2-2 Analog On-Screen Menu Adjustments .......................................2-2 Adjusting the On-Screen Menus ..............................................2-4 Explaining Functions in the On-Screen Menu .........................2-5 Special On-Screen Messages ......................................................2-7 Contents iii Chapter 3 USING THE OPTIONAL COMPAQ MULTIMEDIA ADAPTER Identifying the Multimedia Adapter Components.......................... 3-1 Attaching the Optional Multimedia Adapter to the Projector ... 3-3 Connecting a Camcorder, VCR, or DVD Player to the Optional Multimedia Adapter............................................... 3-4 Connecting a Video Player......................................................... 3-6 Video On-Screen Menu Adjustments......................................... 3-6 Explaining Functions in the Video On-Screen Menu.............. 3-8 Chapter 4 USING THE OPTIONAL REMOTE CONTROL Identifying the Remote Control Buttons......................................... 4-1 Calibrating the Mouse ................................................................ 4-3 Remote Control Functions.......................................................... 4-4 Picture-in-Picture On-Screen Menu Adjustments...................... 4-5 Explaining Functions in the PIP On-Screen Menu.................. 4-7 Chapter 5 CARE AND MAINTENANCE Protecting the Projector .................................................................. 5-1 Cleaning the Lens ........................................................................... 5-3 Replacing the Projector Lamp Module........................................... 5-4 iv Contents appendix A TROUBLESHOOTING Solving Display Problems..............................................................A-1 Solving Lamp Problems .................................................................A-5 Solving Miscellaneous Problems ...................................................A-6 appendix B AGENCY REGULATORY NOTICES Federal Communications Commission Notice...............................B-1 Modifications .............................................................................B-1 Cables.........................................................................................B-1 Declaration of Conformity for Products Marked with the FCC Logo--United States Only ..................................B-2 Canadian Notice.........................................................................B-2 Avis Canadien ............................................................................B-2 European Notice.........................................................................B-3 Japanese Notice..........................................................................B-3 SPECIFICATIONS Specifications .................................................................................B-4 Preset Display Resolutions Table ..............................................B-5 Power Cords...............................................................................B-6 appendix C FLASH ROM UPGRADE Contents v preface Using This Guide The User's Guide includes general information about your projector, troubleshooting and diagnostics, and technical specifications. Symbols and Conventions The following words and symbols mark special messages throughout this guide: ! WARNING: Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. Text set off in this manner presents clarifying information, specific instructions, commentary, sidelights, or interesting points of view. Preface vi Warning Messages Before operating the projector, please read the following messages. ! WARNING: To reduce the risk of harm to your eyes, do not look directly into the bright light of the projection lens. To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. To reduce the risk of electric shock, do not disassemble the projector other than to replace the lamp module. To reduce the risk of personal injury, allow the unit to cool down before changing the lamp, and always unplug the power cord first. vii Preface Chapter 1 Getting Started Product Features The Compaq MP1400 Microportable Projector generates crisp, clear images onto a projection screen by using Digital Light Processing (DLP) technology. The features include: s s s s s s s s s s s s 800 × 600 native SVGA resolution Maximum input resolution: 1024 × 768 (XGA) User replaceable 120-watt high-efficiency, long-life lamp Electronic zoom to 32× Standard VGA analog connection All digital DFP connection Convenient auto-image adjustment 16.7 million displayable colors Multilingual on-screen adjustment menu Plug and Play capability Flash ROM upgradeable Compaq Presentation utility for ease of use in setting up the projector with portable computers Compaq Projector Display Assistant utility to adjust screen settings Carrying case and projector carrying handle included Security lock slot Optional multimedia adapter and remote control s s s s MP1400 Microportable Projector 1-1 Introduction Before setting up your Compaq MP1400 Microportable Projector, be sure your shipping box includes the following items: 1 2 3 Projector and lens cap 10-foot power cable Two signal cables s s One VGA signal cable for use with computers, portables, and some handheld products One DFP (digital flat panel) to DVI (digital video information) upgrade cable for use with compatible digital sources 4 5 6 One RS232 (serial) to DVI upgrade adapter Carrying case and separate projector carrying handle Phillips screwdriver 1-2 MP1400 Microportable Projector 7 8 Quick Setup card and other documentation CD-ROM containing the Compaq Presentation utility program, Compaq Projector Display Assistant utility, and a User's Guide in ten languages If your shipping box does not contain all of the listed items, please contact your Compaq authorized dealer, reseller, or service provider. Setting Up the Projector To set up the projector, follow the instructions below and on the following pages. Separate setup instructions are described for the following products: s s s Portable and desktop computers Handheld computers with VGA capability VCR, DVD, or camcorder (requires optional Multimedia Adapter) The projector is hot pluggable and can be connected, while powered on, to these products while they are powered on. IMPORTANT: Place the projector on a stable desk or table at a distance not less than 3.3 feet and not greater than 35 feet (1 meter to 10.8 meters) from the projection screen. MP1400 Microportable Projector 1-3 ! WARNING: To reduce the risk of electric shock or damage to your equipment: Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times. Disconnect power from the projector by unplugging the power cord from the electrical outlet. Do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the electrical outlet, grasp the cord by the plug. 1-4 MP1400 Microportable Projector Balancing the Projector The projector has a built-in elevator foot used to balance and elevate the projector. Always balance the projector before connecting anything to it. To balance the projector, turn the foot sideways. ! WARNING: To reduce the risk of the projector tipping or overturning, always turn the elevator foot 90 degrees from its original position when the projector is being set up or before pressing the elevator button. MP1400 Microportable Projector 1-5 Connecting the Projector to a Portable Computer 1. Rotate the elevator foot to balance the projector. 2. Connect one end of the projector signal cable to the projector and the other end to the VGA connector 1B or the DFP connector 1A on the portable computer and tighten the screws. Use the VGA cable OR the DFP cable; do not connect both cables. aligns with Be sure the signal cable connector orthe connector. Do not force the cable onto the you may damage the signal cable or the projector. 3. Connect one end of the power cord 2 into the back of the projector, and the other end to an electrical outlet that is easily accessible and close to the projector. 4. Turn on the projector first, then turn on the computer. 1-6 computer, see the white paper included on the CD-ROM. MP1400 Microportable Projector For more information on setting up the projector with a portable Connecting the Projector to a Desktop Computer 1. Rotate the elevator foot to balance the projector. 2. Connect one end of the projector signal cable 1B to the projector and the other end to the VGA connector on the desktop computer and tighten the screws. the digital flat panel (DFP) signal cable 1A to the digital If your computer has a digital connector, connect one end of connector on the projector and the other end to the digital connector on the computer. Connect either the VGA cable OR the DFP cable; do not connect both cables. aligns with Be sure the signal cable connector orthe connector. Do not force the cable onto the you may damage the signal cable or the projector. 3. Connect one end of the power cord 2 into the back of the projector, and the other end to an electrical outlet that is easily accessible and close to the projector. 4. Turn on the projector first, then turn on the computer. MP1400 Microportable Projector 1-7 has been fitted with a For security purposes, this projectorleft, front side) for use with security lock slot 3 (located on the a security cable lock that can be purchased separately at most computer stores. 1-8 MP1400 Microportable Projector Connecting the Projector to a Compaq PC Companion To connect the projector to a Compaq PC Companion, the PC Companion must have a male connector adapter and a VGA-out PC Card with a 15-pin connector. The VGA-out PC Card with the 15-pin connector is not included with the Compaq PC Companion. It is sold separately. For information on purchasing this card, call your Compaq authorized dealer, or reseller. To locate a reseller near you, call Compaq at 1800-AT-COMPAQ or visit the Compaq web site at http://www.compaq.com/products. 1. Connect one end of the signal cable 1 to the projector and connect the other end to the VGA-out PC Card. The VGA-out PC Card may be inserted into the PC slot on the Compaq PC Companion before or after connecting the signal cable. 2. Connect one end of the power cord 2 into the back of the projector, and the other end to an electrical outlet that is easily accessible and close to the projector. MP1400 Microportable Projector 1-9 aligns with Be sure the signal cable connector orthe connector. Do not force the cable onto the you may damage the signal cable or the projector. 3. Turn on the projector first, then turn on the computer. Refer to the "Powering On the Projector" section later in this chapter for instructions on turning on the projector. Connecting the Projector to Other Video Sources To connect the projector to a camcorder, DVD player, or VCR, the optional Compaq Multimedia Adapter must be connected to the projector. The optional Compaq Multimedia Adapter has been specifically designed to fit the Compaq MP1400 Microportable Projector. This adapter converts signals from the camcorder, DVD, or VCR, for compatibility with the projectors. The optional Compaq Multimedia Adapter is not included with the Compaq MP1400 Microportable Projector. It is sold separately and includes a remote control. For information on purchasing the optional Multimedia Adapter and remote control, call your Compaq authorized dealer, or reseller. To locate a reseller near you, call 1-800-AT-COMPAQ or, to purchase directly from Compaq, visit the Compaq web site at http://www.Compaq.com/products/projectors. For information on attaching and using the optional Compaq Multimedia Adapter, refer to Chapter 3, "Using the Optional Multimedia Adapter." 1-10 MP1400 Microportable Projector Powering On the Projector Follow these instructions to power on the projector: 1. Ensure that the power cord and signal cable are securely connected. Make sure the projector is perpendicular to the projection screen. 2. Remove the lens cap 1 from the projector by pulling it straight out. 3. Turn on the Main power switch 2 on the back of the projector and allow the projector to warm up for one to two minutes. When the projector has warmed up, the Compaq startup turns screen displays, and the LED on the STANDBY button 3 green. MP1400 Microportable Projector 1-11 4. Power on your source (computer, PC Companion, or VCR, etc.) and launch the software application being used to display images on the projection screen. If applicable, press the Function key on the computer designated for external display. displays and the time the presentation software is launched, the lamp may shut off and the projector will automatically go into standby mode. If this happens, press the Standby button 3 to power on the lamp. startup the video from When thecomputerscreen disappears, is no incoming the the attached displays. If there video, "Check Video Cable" message will display on the projection screen. If there is a long delay between the time the startup screen Powering Off the Projector Follow these instructions to power off the projector. 1. Press the Standby button to turn off the projector lamp. The message "Going to Standby" displays, and the LED on the Standby button blinks amber. IMPORTANT: Allow the projector to cool down for about five minutes before turning it off. 2. Turn off the Main power switch on the back of the projector. 3. Disconnect the power cord from the electrical outlet and the projector. CAUTION: After the projector is turned off, wait at least one minute before turning the projector back on. Failure to follow this caution can result in damage to the projector. 1-12 MP1400 Microportable Projector Adjusting the Projected Image There are two ways to adjust the projected image: Adjusting the projector height Adjusting the projector focus Adjusting the Projector Height This projector has a built-in elevator foot that can raise the projector approximately one inch. To adjust the height: 1. Ensure the foot is turned sideways to balance the projector. MP1400 Microportable Projector 1-13