Compaq MP1600 Microportable Projector User's Guide Notice The information in this guide is subject to change without notice. COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN; NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL. This guide contains information protected by copyright. No part of this guide may be photocopied or reproduced in any form without prior written consent from Compaq Computer Corporation. © 1999 Compaq Computer Corporation. All rights reserved. Printed in Taiwan. Compaq and Deskpro are registered in the U. S. Patent and Trademark Office. Microsoft, MS-DOS, Windows, Windows NT, and other names of Microsoft products referenced herein are trademarks or registered trademarks of Microsoft Corporation. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies. The software described in this guide is furnished under a license agreement or nondisclosure agreement. The software may be used or copied only in accordance with the terms of the agreement. User's Guide Compaq MP1600 Microportable Projector First Edition (May 1999) Part Number 383706-001 Compaq Computer Corporation CONTENTS preface USING THIS GUIDE Symbols and Conventions..................................................................v Warning Messages ............................................................................vi book 1 ENGLISH Product Features ..............................................................................1-1 Introduction .....................................................................................1-2 Setting Up the Projector ..................................................................1-3 Connecting the Projector to a Portable Computer ......................1-4 Connecting the Projector to a Desktop Computer ......................1-5 Connecting the Projector to a Compaq PC Companion .............1-6 Connecting the Projector to Other Video Sources......................1-7 Attaching the Compaq Video Adapter to the MP1600 Microportable Projector ....................................1-7 Connecting the Compaq Video Adapter to a Camcorder or VCR..............................................................1-8 Powering On the Projector..........................................................1-9 Adjusting the Projected Image..................................................1-10 Adjusting the Projector Height ..............................................1-10 Adjusting the Projector Focus................................................1-12 Image Size Adjustment .............................................................1-13 Using the Compaq Software Utility..........................................1-14 Powering Off the Projector .......................................................1-15 Operating the Projector .................................................................1-16 Control Buttons.........................................................................1-16 On-Screen Menu Adjustments..................................................1-17 Adjusting the On-Screen Menu..............................................1-18 Explaining Functions in the On-Screen Menu .......................1-19 Special On-Screen Messages ....................................................1-21 Care and Maintenance ...................................................................1-22 Protecting the Projector ............................................................1-22 Cleaning the Lens .....................................................................1-23 Replacing the Projector Lamp Module .....................................1-24 Contents iii appendix A TROUBLESHOOTING appendix B AGENCY REGULATORY NOTICES Federal Communications Commission Notice .............................. B-1 Modifications............................................................................. B-1 Cables ........................................................................................ B-1 Declaration of Conformity for Products Marked with the FCC Logo - United States Only.............................. B-2 Canadian Notice...................................................................... B-2 Avis Canadien......................................................................... B-2 European Notice ..................................................................... B-3 Japanese Notice ...................................................................... B-3 SPECIFICATIONS Specifications................................................................................. B-4 Preset Display Resolutions Table.............................................. B-5 Color Display Values.............................................................. B-6 Power Cord Set Requirements................................................... B-6 General Requirements ............................................................ B-6 Country-Specific Requirements ............................................. B-7 appendix C USING THE COMPAQ VIDEO ADAPTER Identifying the Buttons and Connectors ........................................ C-1 Attaching the Video Adapter to the MP1600 Microportable Projector ................................................ C-2 Connecting a Video Player ............................................................ C-3 iv Contents preface Using This Guide The User's Guide includes general information about your projector, troubleshooting and diagnostics, and technical specifications. Symbols and Conventions The following words and symbols mark special messages throughout this guide: ! WARNING: Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. Text set off in this manner presents clarifying information, specific instructions, commentary, sidelights, or interesting points of view. Preface v Warning Messages Before operating the projector, please read the following messages. ! WARNING: ,,#To reduce the risk of harm to your eyes, do not look directly into the bright light of the projection lens. ,,#To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. ,,#To reduce the risk of electric shock, do not disassemble the projector other than to replace the lamp module. ,,#To reduce the risk of personal injury, allow the unit to cool down before changing the lamp, and always unplug the power cord first. vi Preface book 1 English Product Features The Compaq MP1600 Microportable Projector generates crisp, clear images onto a projection screen by using Digital Light Processing (DLP) Technology. The features include the following: s s s s s s s s s s s s 120-watt UHP high-efficiency, long-life lamp 1024 × 768 native XGA resolution 1280 × 1024 SXGA resolution Zooms to 32x Weighs less than 4.5 pounds Standard VGA analog connection All digital DFP connection Convenient auto-image adjustment 16.7 million displayable colors Multilingual on-screen adjustment menu Plug and Play capability Compaq utility program for ease of use in setting up the projector with portable computers Carrying case, projector carrying handle, and lens cleaning cloth kit included Security lock slot User replaceable lamp module Optional video adapter s s s s English 1-1 Introduction The Compaq MP1600 Microportable Projector comes with the following items: s s s Projector and lens cap Power cable Two signal cables: t one VGA signal cable for use with computers, portables, and some handheld products one digital DFP (digital flat panel) signal cable for use with compatible digital sources t s s s s s Carrying case and separate projector carrying handle Lens cleaning cloth kit Philip's screwdriver Quick Setup card and this User's Guide CD-ROM containing Compaq utility program If your shipping box does not contain all of the items listed above, please contact your Compaq authorized dealer, reseller, or service provider. 1-2 English Setting Up the Projector Instructions below and on the following pages explain how to set up the projector. Separate setup instructions are described for the following products: s s s portable and desktop computer handheld computers with VGA capability VCR or camcorder (requires optional video adapter) hot and can be connected, The projectortoisthesepluggable while they are poweredwhile powered on, products on. IMPORTANT: Place the projector on a stable desk or table at a distance not less than 3.3 feet and not greater than 35 feet from the projection screen. ! WARNING: To reduce the risk of electric shock or damage to your equipment: · · · · Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times. Disconnect power from the projector by unplugging the power cord from the electrical outlet. Do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the electrical outlet, grasp the cord by the plug. English 1-3 Connecting the Projector to a Portable Computer 1. Connect one end of the projector signal cable to the projector and the other end to the VGA connector 1B or the DFP connector 1A on the portable and tighten the screws. Use the VGA cable OR the DFP cable; do not connect both cables. aligns with Be sure the signal cable connector orthe connector. Do not force the cable onto the you may damage the signal cable or the projector. 2. Connect one end of the power cord 2 into the back of the projector, and the other end to an electrical outlet that is easily accessible and close to the projector. 1-4 English Connecting the Projector to a Desktop Computer 1. Connect one end of the projector signal cable 1 to the projector and the other end to the VGA connector on the desktop computer and tighten the screws. cable aligns the Be sure the signal connector orwith mayconnector. Do not force the cable onto the you damage the signal cable or the projector. 2. Connect one end of the power cord 2 into the back of the projector, and the other end to an electrical outlet that is easily accessible and close to the projector. security purposes, fitted with Foruse with a security this projector has beenpurchased a slot 3 for cable lock that can be separately at most computer stores. English 1-5 Connecting the Projector to a Compaq PC Companion To connect the projector to a Compaq PC companion, the PC companion must have a male connector adapter and a VGA-out PC Card with a 15-pin connector. PC Card with the 15-pin connector is not The VGA-out the Compaq PC companion. It is sold separately. included with For information on purchasing this card, call your Compaq authorized dealer, seller, or reseller. To locate a reseller near you, call Compaq at 1-800-AT-COMPAQ or visit the Compaq web site at http://www.compaq.com. 1. Connect one end of the signal cable 1 to the projector and connect the other end to the VGA-out PC Card. The VGA-out PC Card may be inserted into the PC slot on the Compaq PC companion before or after connecting the signal cable. 2. Connect one end of the power cord 2 into the back of the projector, and the other end to an electrical outlet that is easily accessible and close to the projector. a Compaq Aero To connect the projector to adevice, follow the instructions for connecting portable computer. 1-6 English Connecting the Projector to Other Video Sources To connect the projector to a camcorder or VCR, the Compaq Video Adapter must be connected to the projector. The Compaq Video Adapter has been specifically designed to fit the Compaq MP1600 Microportable Projector. This adapter converts the signals from the camcorder for compatibility with the projector. included with the Compaq The Compaq Video Adapter is not It is sold separately. For MP1600 Microportable Projector. information on purchasing this video adapter, call your Compaq authorized dealer, seller, or reseller. To locate a reseller near you, call 1-800-AT-COMPAQ or visit the Compaq web site at http://www.compaq.com. Attaching the Compaq Video Adapter to the MP1600 Microportable Projector 1. Push in the two buttons 1 on the bottom sides of the video adapter. 2. Insert the hooks on top of the video adapter into the upper slots 2 on the projector and, at the same time, insert the adapter plug into the digital connector 3 on the back of the projector. 3. Release the buttons on the sides of the video adapter to complete the connection. English 1-7 Connecting the Compaq Video Adapter to a Camcorder or VCR 1. Use an RCA cable to connect a VCR to the video connector 1 on the video adapter. Use an S-video cable to connect a camcorder to the S-video connector 2 on the video adapter. 2. Connect one end of the power cord 3 into the back of the projector and the other end to an electrical outlet that is easily accessible and close to the projector. The Compaq Video Adapter can remain attached to the projector, or it can be removed and stored in the carrying case. For more information on using the video adapter, see Appendix C, "Using the Compaq Video Adapter." 1-8 English Powering On the Projector Follow these instructions to power on the projector: 1. Ensure that the power cord and signal cable are securely connected. Make sure the projector is perpendicular to the screen. 2. Remove the lens cap 1 by pulling it straight out. 3. Turn on the Main power switch 2 on the back of the projector and allow the projector to warm up for 1-2 minutes. has warmed up, the screen When the projectorseconds and the LED Compaq startupbutton will display for 30 on the Standby 3 will turn green. When the startup screen disappears, the video from the attached computer will display. If there is no incoming video, the "Check Video Cable" message will display on the projection screen. 4. Power on your source (computer, PC Companion, or VCR, etc.) and launch the software application being used to display images on the projection screen. English 1-9 a delay between the time the startup screen If there isandlong time the presentation software is launched, the displays the lamp may shut off and the projector will automatically go into standby mode. If this happens, press the Standby button 3 to power on the lamp. time is adjustable in the The Compaq startup screen display Management function of Standby Lamp Delay feature in the the on-screen menu. Adjusting the Projected Image There are two ways to adjust the projected image: s s Adjusting the projector height Adjusting the projector focus Adjusting the Projector Height This projector has a built-in elevator foot that can raise the projector approximately one inch. To adjust the height: 1. Turn the foot sideways to balance the projector. 1-10 English 2. Raise the projector to the desired display angle, then press the elevator button 1 on the front of the projector to release the foot 2. 3. To lower the display angle, press the button on the front of the projector again and press down on the projector to lower it. ! WARNING: To reduce the risk of the projector tipping or overturning, always turn the elevator foot 90° from its original position before pressing the elevator button. English 1-11 Adjusting the Projector Focus To focus the projected image, rotate the focus ring 1 until the image is clear. The projector will focus at distances from 3.3 feet to 35.64 feet (1 meter to 10.8 meters). If vertical bars appear on the display after adjusting the focus, press the Resync button 2 to automatically synchronize and track the display. If the button does not correct the display, use the Digital Conversion feature in the on-screen menu to manually adjust the synchronization and tracking (refer to the "On-Screen Menu Adjustments" section). 1-12 English Image Size Adjustment Screen Diagonal Screen Width Screen Height Projection Distance 42.2" 33.8" 25.3" 4.9' 56.2" 45" 33.7" 6.6' 84.3" 67.4" 50.6" 9.8' 112.5" 90" 67.5" 13.1' 140.6" 112.4" 84.4" 16.4' 168.7" 135" 101.2" 19.7' 196.9" 157.5" 118.1" 23.0' 225" 180" 135" 26.2' 253.1" 202.4" 151.9" 29.5' 281.2" 225" 168.7" 32.8' at distance If the projector is used be the maximumusual. in this chart, the display may appear to dimmer than English 1-13 Using the Compaq Software Utility The Compaq software utility included on the CD-ROM is for use with Compaq portable computers with Compaq BIOS only. The purpose of the software utility is to disable power management features of the portable computer while the Compaq MP1600 Microportable Projector is connected to it. The utility also disables the computer's screen savers and auto suspend feature. The software utility does NOT support Compaq portable computers with non-Compaq BIOS, nor does it support Compaq desktop computers or non-Compaq computers. A graphical user interface (GUI) is required to control the MP1600 Projector's resolution settings and enabled/disabled status. The Compaq software utility supports the following GUI operating systems: Microsoft Windows 95, 98, and NT 4.0. To install the software utility onto a Compaq portable computer: 1. Insert the CD-ROM into the computer's CD drive. 2. From Microsoft Windows 95, 98, or NT 4.0 desktop, click STARTÆRUN and type D:\SETUP.EXE in the dialog box. 3. Select OK in the dialog box to install the program. The software utility installs on the hard drive and places a program icon in the Windows system tray. 4. Double-click the program icon to launch the Presentation Properties dialog box. 5. Set the Presentation Mode Duration time in the dialog box. The dialog box has default settings enabled to turn off the computer's power management features and for the video resolution. 6. Select OK or APPLY from the dialog box to execute the default settings. The software dialog box closes and the computer is ready to continue with the presentation. This software utility is provided on the CD-ROM in the following languages: English, Dutch, French, German, Italian, and Spanish. Once Setup is executed, the appropriate language is installed on the computer based on the computer's operating system language. 1-14 English