User manual CONCORD 3X

CONGRATULATIONS Congratulations on the purchase of your new camera. Your camera has been carefully engineered and manufactured to give you dependable operation. Read this manual before operating the unit to become more familiar with it and obtain the performance that will bring you continued enjoyment for many years. This manual has been written and formatted with such depth and detail so you can maximize the features of your camera, yet easily follow the instructions. 1 TABLE OF CONTENTS Table of Contents.........................................................................................2 Important Information..................................................................................3 FCC Information ......................................................................................3 User Information.....................................................................................3 Precautions...................................................................................................4 Location of Controls.....................................................................................5 Front/Top.................................................................................................5 Bottom/Rear............................................................................................6 Display ....................................................................................................6 Getting Started.............................................................................................7 Loading the Battery................................................................................7 Turning the Camera On and Off .............................................................7 Checking the Battery ..............................................................................8 Setting the Time and Date .....................................................................8 Setting the Flash ...................................................................................11 Setting the Image Quality .....................................................................11 Taking Pictures ...........................................................................................12 Taking Pictures......................................................................................12 Using the Self-Timer..............................................................................14 Pictures Remaining ...............................................................................14 Auto Power Off......................................................................................15 Reviewing/Deleting Pictures .......................................................................16 Reviewing Pictures................................................................................16 Deleting Individual Pictures From Memory...........................................16 Deleting All Pictures From Memory ......................................................18 Computer Connection .................................................................................19 Installing the Eye-Q3X Camera Software ..............................................19 Connecting Your Camera to Your PC and Downloading Pictures.........19 Downloading Your Pictures Directly to Windows using the "My Camera" Device .............................................................................21 Troubleshooting Guide...............................................................................22 Care and Maintenance ...............................................................................24 Software Customer Care ............................................................................25 2 IMPORTANT INFORMATION FCC INFORMATION FCC WARNING: This equipment meets the limits for a class B digital device, pursuant to Part 15 of FCC rules. Only the cable supplied with the camera should be used. Operation with other cables is likely to result in interference to radio and TV reception and could void the user's authorization to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: · This device may not cause harmful interference. · This device must accept any interference received, including interference that may cause undesired operation. Tested To Comply With FCC Standards for HOME OR OFFICE USE Changes or modifications not expressly approved by the manufacturer may void the user's authority to operate this equipment. USER INFORMATION NOTE: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. 3 IMPORTANT INFORMATION Be sure to observe the following precautions when using the camera: · Never try to take pictures or use the built-in display when operating a motor vehicle or while walking. · Never try to open the case of the camera or attempt your own repairs. Always leave service to authorized repair facilities. · Keep the camera away from water and other liquids, and never let it get wet. Never use when it is raining or snowing. · Should foreign matter or water get into the unit, immediately turn the power off and contact your local authorized service center. · Physical damage and malfunction of this unit can cause the image data stored in its memory to be deleted. Be sure to always keep backup copies of data by transferring them to a personal computer. · Under the environment with electrostatic discharge, the unit may require the user to reset · Do not leave the camera in places subject to extremely high temperatures, such as a sealed vehicle or in direct sunlight. · Disconnect the battery when camera is not used for long periods of time. · · · · Use 3V Lithium Battery (CR123A) only. Dispose of battery promptly and in a manner that complies with applicable laws. Do not place the camera in unstable locations, such as a sloping surface or unstable table where the camera may fall. Do not touch or press on the display or lens. 4 LOCATION OF CONTROLS FRONT/TOP 1 2 3 4 5 6 7 11 10 9 8 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Flash Self-Timer LED Indicator Image Quality Button Flash/Infinity Focus Button Zoom In/Up (+) Button Zoom Out/Down (­) Button CAMERA/REVIEW/Power Button Shutter/OK Button Liquid Crystal Display Self Timer Button Lens 5 LOCATION OF CONTROLS (CONTINUED) BOTTOM/REAR 12 13 14 15 12. Viewfinder Sharpness Adjustment Ring 13. Viewfinder DISPLAY 14. Battery Compartment 15. USB Port Connection (To PC) H A A G F E D B C 6 A. Flash Mode Indicators B. Pictures Remaining Indicator C. Mode Indicators D. Time/Date Indicator E. Battery Indicator F. Self-Timer Indicator G. Image Quality Indicator H. Focus Mode Indicator GETTING STARTED LOADING THE BATTERY Before taking pictures, insert a CR123A 3V lithium battery (supplied) into your camera's battery compartment, as follows: 1. Using your fingernail, open 1 the battery compartment. 2. Insert the 3V lithium battery 2­ into the battery compartment, + observing the polarity marks (+ / ­ ) as indicated in fig. 1. 3. Close the battery compartment. FIGURE 1 BATTERY PRECAUTIONS Follow these precautions when using a battery in your camera: 1. Use only the size and type of battery specified. 2. Be sure to follow the correct polarity when installing the battery. A reversed battery may cause damage to your camera. 3. If not using your camera for a long period of time, remove the battery to prevent damage or injury from possible battery leakage. TURNING THE CAMERA ON AND OFF · To turn your camera on, press the CAMERA/REVIEW/Power button; the LCD screen will turn on. · To turn your camera off, press and hold the CAMERA/ REVIEW/Power button for 3 seconds; the LCD screen will turn blank. 7 + A ­ CAMERA REVIEW 1 FIGURE 2 GETTING STARTED (CONTINUED) CHECKING THE BATTERY The camera has a battery indicator that shows the current battery level, regardless of the mode the camera is in. FULL Battery has full power and is ready to use. LOW Battery has low power and will need to be replaced soon. EMPTY Battery has very little power and must be replaced. Do not attempt to use the camera once the "Empty" battery indicator appears in the display. Replace the battery immediately in this case. It is a good idea to always keep a spare battery together with your camera kit. SETTING THE TIME AND DATE 1 + A 2 2 REVIEW 1 + A ­ CAMERA 1 2 ­ CAMERA REVIEW Turn your camera on by pressing the CAMERA/REVIEW/Power button and make sure it is in the CAMERA mode (mode arrow will point to the word CAMERA). If it is not, press the CAMERA/REVIEW/ Power button again so the mode arrow points to the word CAMERA. Press and hold the Self-Timer button for 5 seconds to enter the Clock Set mode; the 12/24 hour setting will start blinking. Press the Zoom In/Up + or Zoom Out/Down ­ button to cycle between the 12 or 24 hour mode. 8 GETTING STARTED (CONTINUED) 3 2 2 + A 1 4 2 2 1 + A ­ CAMERA REVIEW ­ CAMERA REVIEW Press the Self-Timer button and the minutes will blink. Press the Zoom In/Up + or Zoom Out/Down ­ button to adjust the minute setting until the present minute appears. Press the Self-Timer button and the hours will blink. Press the Zoom In/Up + or Zoom Out/Down ­ button to adjust the hour setting until the present hour appears. Make sure to set the correct AM/PM setting when setting the hours. 5 2 2 1 + A 6 2 2 + A 1 ­ CAMERA REVIEW ­ CAMERA REVIEW Press the Self-Timer button and the date format will blink. Press the Zoom In/Up + or Zoom Out/Down ­ button to adjust the date format until the desired format appears. m/d/y is the standard format in the US. Press the Self-Timer button and the year will blink. Press the Zoom In/Up + or Zoom Out/Down ­ button to adjust the year setting until the present year appears. 9 GETTING STARTED (CONTINUED) 7 2 2 + A 1 8 + A 1 ­ CAMERA REVIEW ­ CAMERA REVIEW Press the Self-Timer button and the months will blink. Press the Zoom In/Up + or Zoom Out/Down ­ button to set the present month. Repeat this procedure to set the present day. Press the Self-Timer button and the time and date will be set. Your camera will return to the Camera mode. NOTES: · Your camera must be in the Camera mode (arrow pointing at the word CAMERA) to set the time and date. · After entering the Clock Set mode, a button must be pressed within 30 seconds, or the unit will revert back to the Camera mode. · While setting, press and hold the Zoom In/Up + and/or Zoom Out/Down ­ buttons for faster setting. This is useful when setting the hours and minutes. · When setting the day, your camera will automatically know how many days are in the selected month and cycle back to 1 when it has been reached. For example, if the month set is July and you try to increase the day past 31, the day will cycle back to 1. 10 GETTING STARTED (CONTINUED) SETTING THE FLASH Your camera is equipped with an automatic sensor flash, which eliminates the need of turning it on or off depending on light conditions. The flash range is approximately 18 inches to 6 feet (50cm to 2m). The shooting range is approximately 18 inches to infinity (50cm to infinity). The flash is programmed for 3 different settings, as follows: A AUTO FLASH Flash fires automatically, as needed. FLASH OFF Flash is off. FLASH OFF / INFINITY FOCUS Flash off, camera set to infinity focus. Flash Off is a great feature that allows you to utilize only existing light, such as a sunset. This feature is also called "museum mode", as many museums do not allow flash photography inside their premises. SETTING THE IMAGE QUALITY The higher the image quality, the larger the file size, thus reducing the number of pictures you will be able to store into the camera's internal memory. Select from the 3 Image Quality Settings: : Standard Quality photo saved at high compression, and at 640 x 480 resolution. Use this setting if you are going to use the pictures online or e-mail them (storage capacity: approximately 81 pictures). : Fine Quality photo saved at medium compression and at 640 x 480 resolution. Use this setting for everyday pictures (storage capacity: approximately 58 pictures). : Super Fine Quality (1280 x 960) photo saved at standard compression and at 1280 x 960 resolution. Use this setting when a very detailed picture is needed (storage capacity: approximately 42 pictures). NOTE: The Flash Mode and Image Quality settings will revert back to the factory default (Auto Flash and Fine Quality mode) every time the camera is turned off. 11 TAKING PICTURES 1 + A 2 + 1 A 2 ­ CAMERA REVIEW ­ CAMERA REVIEW 1 Turn your camera on and make sure it is in the CAMERA mode (mode arrow will appear over the word CAMERA). If it is not, press the CAMERA/REVIEW/Power button again so the mode arrow appears over the word CAMERA. If desired, press the Flash button to set the flash mode of your choice (see previous page). If desired, press the Image Quality button to set the image quality of your choice (see previous page). 3 1 4 1 + A For added convenience, your camera is equipped with a diopter (Viewfinder Sharpness Adjustment Ring). Look through the viewfinder and if the image you see appears blurred, rotate the diopter ring left or right until the image is focused to your satisfaction. This adjustment has to be done only once, however, if another person uses your camera, they may need to readjust it to their vision. You will then have to readjust the viewfinder to your preferred setting once again. 1 ­ CAMERA REVIEW Look into the viewfinder and use the Zoom In/Up + or Zoom Out/Down ­ button to zoom in or out and frame the subject as desired. 12 TAKING PICTURES (CONTINUED) While looking into the viewfinder, observe the red LED status. The red LED indicates the following: LED IS OFF: OK to proceed. LED IS BLINKING: - Indicates that Flash is Charging. Wait until LED turns completely off (approx. 4 seconds) before taking your picture Note: (The Flash Icon on the LCD Display will also be blinking while the flash is being charged). LED IS LIT: This indicates one of the two possibilities (or both): A: Memory is Full. Download Pictures to the PC or delete a few pictures from memory before continuing. B: Battery is weak. Replace the battery with a new one before continuing. 1 1 5 A ERA REVIEW 2 Now you are ready to take your picture! Press the SHUTTER/OK button all the way down and release: - The viewfinder will then temporarily turn black while the camera is focusing your picture and capturing it into memory. - The image just captured will then be displayed on the Microdisplay (Review mode) for about 5 seconds, and then the camera will revert to "Camera Mode". You are now ready to shoot another picture! IMPORTANT: Do not move the camera while the viewfinder is black,. Wait until the image just taken appears on the Microdisplay. 13 TAKING PICTURES (CONTINUED) USING THE SELF-TIMER 1 + A 2 A 1 ­ CAMERA REVIEW 1 CAMERA REVIEW 2 Turn your camera on and make sure it is in the CAMERA mode (mode arrow will point to the word CAMERA). If it is not, press the CAMERA/REVIEW/Power button again so the mode arrow points to the word CAMERA. Press the Self-Timer button ; the Self-Timer indicator ( ) will appear. Press the SHUTTER/OK button to start the Self-Timer. 3 4 The Red LED inside and on the front of the camera will blink to indicate the camera is set to take a picture. When 4 seconds are left, the LED will blink faster. When the countdown reaches 1 second, the RED LED will light solid and then take the picture. 14 TAKING PICTURES (CONTINUED) PICTURES REMAINING The leftmost number in the display indicates how many pictures are available in the selected Image Quality mode. As pictures are taken, this number decreases. If "0" is blinking, it indicates that the memory is full and there is no more space for additional pictures (at any image quality mode). If "0" is lit solid, then there are still more pictures available at a lower level of quality. It is normal for the picture counter not to decrease when taking a picture. This is because the Image Quality setting did not take up sufficient memory space to decrease the remaining number counter. AUTO POWER OFF In order to extend the battery life, your camera is equipped with an auto-shut off circuitry that will automatically shut off the power when the camera is left unattended or untouched for more than 30 seconds. 15 REVIEWING/DELETING PICTURES REVIEWING PICTURES 1 + ­ CAMERA REVIEW 2 1 Turn the unit on and press the CAMERA/REVIEW/Power button so the mode arrow points to the word REVIEW. Look into the viewfinder, the last picture taken will be displayed, first as a rough image, and then as a sharper version in a vertical sweep motion. Use the Zoom In/Up + or Zoom Out/Down ­ button to scroll through the pictures stored in memory to review them. DELETING INDIVIDUAL PICTURES FROM MEMORY 1 + A 2 FILE INFO DELETE DELETE ALL DONE ­ CAMERA REVIEW 1 34 KB SVI_0007 Repeat the "Reviewing Pictures" steps 1 and 2 above . Once you have found the picture you want to delete, press the Shutter/OK button once. The file menu will appear. The white arrow will point to the active menu selection. To SCROLL through the menu choices, use the Zoom In/Up + or Zoom Out/Down ­ buttons. The arrow will move up or down through the choices. To EXECUTE it, press the Shutter/OK button when the arrow is pointing to the desired function. 16 REVIEWING/DELETING PICTURES (CONTINUED) 3 FILE INFO DELETE DELETE ALL DONE 4 CONTINUE DELETE? OK CANCEL 34 KB SVI_0007 Select DELETE: Erases the frame shown in the bottom right of the screen. A Confirmation screen will appear. Select OK to proceed, or to go back, select CANCEL. 5 FILE INFO DELETE DELETE ALL DONE 34 KB SVI_0007 Once the picture is erased, the previous menu will appear. Select DONE to exit. Repeat the process if you wish to delete more individual pictures. 17 REVIEWING/DELETING PICTURES DELETING ALL PICTURES FROM MEMORY 1 2 2 + 2 FILE INFO DELETE DELETE ALL DONE ­ CAMERA REVIEW 1 34 KB SVI_0007 On Picture Review mode, press the Shutter/OK button once and the File Info menu will appear. While looking into the viewfinder, select a picture to delete using the Zoom In/Up + or Zoom Out/Down ­ button . Select DELETE ALL:Erases the picture displayed plus ALL PICTURES stored in memory. 3 CONTINUE DELETE OF ALL IMAGES? 4 DELETING IMAGES A Confirmation screen will appear. Select OK to proceed, or to go back, select CANCEL. While the pictures are being erased, the message "DELETING PICTURES" will be displayed on the screen. This process should last 15 seconds, then the camera will revert to CAMERA MODE. You are now ready to take pictures again! Note: If you press the REVIEW button after deleting all pictures, the viewfinder will display the "NO IMAGES" message, indicating that the memory is clean. 18 COMPUTER CONNECTION INSTALLING YOUR EYE-Q3X CAMERA SOFTWARE: You must first install the Eye-Q 3x software before you can download pictures from your camera into your PC. 1. Insert the Eye-Q 3x CD-ROM into your computer's CD-ROM Drive. 2. The installation screen will appear. Follow the software installation instructions on your screen to install the software. If your computer has the CD-ROM automatic installation disabled, click on START, select MY COMPUTER and locate the CD-ROM Drive. Then, Double-Click on the CD-ROM Drive icon to show its contents, double-click on the file named SETUP.EXE and follow the instructions on your screen. CONNECTING YOUR CAMERA TO YOUR PC AND DOWNLOADING PICTURES Before you can use your camera to download images to your computer, you need to install the Eye-Q 3x Software on your computer (see "Installing Your Eye-Q 3X Camera Software" section above). Once you have taken a few pictures with your Eye-Q 3X camera or as soon as the camera's memory is full, you can download the pictures into your computer to print, e-mail, store or to manipulate them in creative and fun ways, utilizing the bonus imaging software that accompanies your Eye-Q 3x. First, connect your camera to the PC, following these simple steps: 1. Using your fingernail, open the USB port door to access your camera's USB cable connector. 2. Plug the square end of the (supplied) USB cable to the USB connector in your camera. 3. Plug the rectangular end of the USB cable to your PC's USB port (please refer to your PC's documentation if TO COMPUTER you do not know where the USB port is located). 4. Turn your Eye-Q 3x Camera's power on. 19 COMPUTER CONNECTION (CONTINUED) 5. Launch ArcSoft PhotoImpression software by clicking on Start­Programs and choose PhotoImpression from the application list on your screen. 6. Follow these steps to retrieve your pictures from the camera: A- Click on GET PHOTOS icon. B- Click on the CAMERA/ SCANNER button C- Click on drop-down list under SELECT SOURCE and choose Concord EYE-Q. D- Click on the Camera /Scanner Icon. A second window will appear showing the contents (pictures) of your camera's memory, and options on how to handle them. E- Select the picture(s) you want to retrieve, by pressing the Ctrl key on your keyboard and clicking once on each thumbnail. OR F- Click on SELECT ALL (all pictures displayed will be retrieved). G- Click on GET PHOTOS. H- The pictures just retrieved will be placed as thumbnails on the bottom of your application window. To open them, just double-click on the thumbnail. You are now ready to print, store or further enhance /manipulate your pictures. Refer to ArcSoft 's Software Guide for a tutorial on all the features PhotoImpression offers. 20