User manual D-LINK DI-624M

DI-624M User's Manual Table of Contents Table of Contents Package Contents ............................................................................... 4 Minimum System Requirements .............................................................. 4 Introduction ...................................................................................... 5 Features and Benefits .......................................................................... 6 Hardware Overview ............................................................................. 7 Connections ....................................................................................................... 7 LEDs ................................................................................................................... 8 Wireless Basics .................................................................................. 9 Standards-Based Technology .......................................................................... 10 Installation Considerations .............................................................................. 10 Getting Started ................................................................................. 11 Using the Configuration Menu .............................................................. 12 Home ................................................................................................................ 13 Wizard ......................................................................................................... 13 Wireless ...................................................................................................... 14 WAN ............................................................................................................ 16 Dynamic IP Address .............................................................................. 16 Static IP Address ................................................................................... 17 PPPoE .................................................................................................... 19 LAN ............................................................................................................. 21 DHCP ........................................................................................................... 22 Advanced .......................................................................................................... 23 Virtual Server .............................................................................................. 23 Applications ................................................................................................ 25 Filters .......................................................................................................... 27 IP Filters ................................................................................................ 27 MAC Filters ............................................................................................ 28 Parental Control .......................................................................................... 29 URL Blocking ......................................................................................... 29 Domain Blocking ................................................................................... 30 Firewall ........................................................................................................ 31 DMZ............................................................................................................. 32 Performance ............................................................................................... 33 Tools ................................................................................................................. 35 Admin .......................................................................................................... 35 Time ............................................................................................................ 37 D-Link Systems, Inc. 2 DI-624M User's Manual Table of Contents System ........................................................................................................ 38 Firmware ..................................................................................................... 39 Misc. ........................................................................................................... 40 Tools ................................................................................................................. 42 Device Info .................................................................................................. 42 Log .............................................................................................................. 44 Log Settings .......................................................................................... 45 Stats ............................................................................................................ 46 Wireless ...................................................................................................... 46 Troubleshooting ............................................................................... 47 Technical Specifications ..................................................................... 53 Frequently Asked Questions ................................................................. 56 Appendix ........................................................................................ 90 Securing Your Network ..................................................................................... 90 Glossary ........................................................................................................... 91 Contacting Technical Support ............................................................... 99 Warranty ....................................................................................... 100 Registration ................................................................................... 104 D-Link Systems, Inc. 3 DI-624M User's Manual Package Contents Package Contents D-Link DI-624M Super G MIMO Wireless Router CAT-5 Ethernet Cable (All the DI-624M's Ethernet ports are Auto-MDIX) Power Adapter (5.0V, 2.5A) Vertical Stands Mounting Kit CD-ROM with Software and Manual Quick Installation Guide Note: Using a power supply with a different voltage than the one included with your product will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller. Minimum System Requirements Ethernet-Based Cable or DSL Modem Computers with Windows, Macintosh, or Linux-based operating systems with an installed Ethernet adapter and CD-ROM Drive Internet Explorer Version 6.0 or Netscape Navigator Version 7.0 and Above D-Link Systems, Inc. 4 DI-624M User's Manual Introduction Introduction The D-Link DI-624M Super G MIMO Wireless Router is an 802.11g high-performance, wireless router that supports high-speed wireless networking at home, at work or in public places. Unlike most routers, the DI-624M provides data transfers at up to 108 Mbps* (compared to the standard 54 Mbps) when used with other D-Link Super G MIMO products. The 802.11g standard is backwards compatible with 802.11b products. This means that you do not need to change your entire network to maintain connectivity. You may sacrifice some of 802.11g's speed when you mix 802.11b and 802.11g devices, but you will not lose the ability to communicate when you incorporate the 802.11g standard into your 802.11b network. You may choose to slowly change your network by gradually replacing the 802.11b devices with 802.11g devices . In addition to offering faster data transfer speeds when used with other 802.11g products, the DI-624M has the newest, strongest, most advanced security features available today. When used with other 802.11g WPA (WiFi Protected Access) compatible products in a network, the security features include: WPA: Wi-Fi Protected Access authorizes and identifies users based on a secret key that changes automatically at a regular interval. WPA uses TKIP (Temporal Key Integrity Protocol) to change the temporal key every 10,000 packets (a packet is a kind of message transmitted over a network.) This insures much greater security than the standard WEP security. (By contrast, the older WEP encryption required the keys to be changed manually.) *Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead lower actual data throughput rate. D-Link Systems, Inc. 5 DI-624M User's Manual Features and Benefits Features and Benefits Fully compatible with the 802.11g standard to provide a wireless data rate of up to 108Mbps Backwards compatible with the 802.11b standard to provide a wireless data rate of up to 11Mbps WPA (Wi Fi Protected Access) authorizes and identifies users based on a secret key that changes automatically at a regular interval, for example: Pre Shared Key mode means that the home user, without a RADIUS server, will obtain a new security key every time the he or she connects to the network, vastly improving the safety of communications on the network Utilizes OFDM technology (Orthogonal Frequency Division Multiplexing) User-friendly configuration and diagnostic utilities Operates in the 2.4GHz frequency range Connects multiple computers to a Broadband (Cable or DSL) modem to share the Internet connection Advanced Firewall features: Supports NAT with VPN pass-through, providing added security, MAC Filtering, IP Filtering, URL Filtering, Domain Blocking, and Scheduling DHCP server enables all networked computers to automatically receive IP addresses Web-based interface for Managing and Configuring Access Control to manage users on the network Supports special applications that require multiple connections Equipped with 4 10/100 Ethernet ports, 1 WAN port, Auto MDI/MDIX D-Link Systems, Inc. 6 DI-624M User's Manual Hardware Overview Hardware Overview Connections All Ethernet Ports (WAN and LAN) are auto MDI/MDIX, meaning you can use either a straight-through or a crossover Ethernet cable. Reset Button Pressing the reset button restores the router to its original factory default settings. Auto MDI/MDIX LAN Ports These ports automatically sense the cable type when connecting to Ethernetenabled computers. DC Power Connector The DC power input connector is labeled DC 5V with a single jack socket to supply power to the DI-624M. Auto MDI/MDIX WAN Port This is the connection for the Ethernet cable to the Cable or DSL modem D-Link Systems, Inc. 7 DI-624M User's Manual Hardware Overview LEDs WAN LED A solid light indicates connection on the WAN por t. This LED blinks during data transmission. WLAN LED A solid light indicates that the wireless segment is ready. This LED blinks during wireless data transmission. LOCAL NETWORK LED POWER LED A solid light indicates a proper connection to the power supply. STATUS A blinking light indicates that the DI-624M is ready. A solid light indicates a connection to an Ethernetenabled computer on ports 1-4. This LED blinks during data transmission. D-Link Systems, Inc. 8 DI-624M User's Manual Wireless Basics Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. D-Link wireless products will allow you access to the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking brings. A WLAN is a cellular computer network that transmits and receives data with radio signals instead of wires. WLANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. People use wireless LAN technology for many different purposes: Mobility - Productivity increases when people have access to data in any location within the operating range of the WLAN. Management decisions based on real-time information can significantly improve worker efficiency. Low Implementation Costs ­ WLANs are easy to set up, manage, change and relocate. Networks that frequently change can benefit from WLANs ease of implementation. WLANs can operate in locations where installation of wiring may be impractical. Installation and Network Expansion - Installing a WLAN system can be fast and easy and can eliminate the need to pull cable through walls and ceilings. Wireless technology allows the network to go where wires cannot go - even outside the home or office. Scalability ­ WLANs can be configured in a variety of topologies to meet the needs of specific applications and installations. Configurations are easily changed and range from peer-to-peer networks suitable for a small number of users to larger infrastructure networks to accommodate hundreds or thousands of users, depending on the number of wireless devices deployed. Inexpensive Solution - Wireless network devices are as competitively priced as conventional Ethernet network devices. D-Link Systems, Inc. 9 DI-624M User's Manual Wireless Basics Standards-Based Technology The DI-624M Super G MIMO Wireless Router utilizes the 802.11g standard. The IEEE 802.11g standard is an extension of the 802.11b standard. It increases the data rate up to 54Mbps within the 2.4GHz band, utilizing OFDM technology. This means that in most environments, within the specified range of this device, you will be able to transfer large files quickly or even watch a movie in MPEG format over your network without noticeable delays. This technology works by transmitting highspeed digital data over a radio wave utilizing OFDM (Orthogonal Frequency Division Multiplexing) technology. OFDM works by splitting the radio signal into multiple smaller sub-signals that are then transmitted simultaneously at different frequencies to the receiver. OFDM reduces the amount of crosstalk (interference) in signal transmissions. The DI-624M is backwards compatible with 802.11b devices. This means that if you have an existing 802.11b network, the devices in that network will be compatible with 802.11g devices at speeds of up to 11Mbps in the 2.4GHz range. Installation Considerations The D-Link DI-624MSuper G MIMO Wireless Router lets you access your network, using a wireless connection, from virtually anywhere within its operating range. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines: 1 Keep the number of walls and ceilings between the DI-624M and other network devices to a minimum - each wall or ceiling can reduce your D-Link wireless product's range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized. 2 Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception. 3 Building Materials can impede the wireless signal - a solid metal door or aluminum studs may have a negative effect on range. Try to position wireless devices and computers with wireless adapters so that the signal passes through drywall or open doorways and not other materials. 4 Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate extreme RF noise. D-Link Systems, Inc. 10 DI-624M User's Manual Getting Started Getting Started Setting up a Wireless Infrastructure Network Please remember that D-Link Super G MIMO wireless devices are pre-configured to connect together, right out of the box, with their default settings. For a typical wireless setup at home (as shown above), please do the following: 1 2 3 4 5 6 You will need broadband Internet access (a Cable or DSL-subscriber line into your home or office) Consult with your Cable or DSL provider for proper installation of the modem. Connect the Cable or DSL modem to the DI-624M Wireless Broadband Router (see the printed Quick Installation Guide included with your router). If you are connecting a desktop computer to your network, install the D-Link AirPlus Xtreme G DWL-G520 wireless PCI adapter into an available PCI slot on your desktop computer. You may also install the DWL-520+, or the DWL-520. (See the printed Quick Installation Guide included with the network adapter.) Install the D-Link DWL-G650M wireless Cardbus adapter into a laptop computer. (See the printed Quick Installation Guide included with the DWL-G650M.) Install the D-Link DFE-530TX+ adapter into a desktop computer. The four Ethernet LAN ports of the DI-624M are Auto MDI/MDIX and will work with both Straight-Through and Cross-Over cable. (See the printed Quick Installation Guide included with the DFE-530TX+.) D-Link Systems, Inc. 11 DI-624M User's Manual Using the Configuration Menu Using the Configuration Menu Whenever you want to configure your DI-624M, you can access the Configuration Menu by opening the Web-browser and typing in the IP Address of the DI-624M. The DI-624M's default IP Address is shown below: http://192.168.0.1 Open the Web browser. Type in the IP Address of the Router (http://192.168.0.1). Note: if you have changed the default IP Address assigned to the DI-624M, make sure to enter the correct IP Address. Type admin in the User Name field. Leave the Password blank. Click OK. D-Link Systems, Inc. 12 DI-624M User's Manual Using the Configuration Menu Home The Advanced tab provides the following configuration options: Wizard, Wireless, WAN, LAN, and DHCP. Wizard The Home>Wizard screen will appear. Please refer to the Quick Installation Guide for more information regarding the Setup Wizard. The DI-624M is a Super G MIMO wireless router ideal for home networking and small business networking. The setup wizard will guide you to configure the DI-624M to connect to your ISP (Internet Service Provider). The DI-624M's easy setup will allow you to have Internet access within minutes. Please follow the setup wizard step by step to configure the DI624M. Home > Wizard These buttons appear on most of the configuration screens in this section. Please click on the appropriate button at the bottom of each screen after you have made a configuration change. D-Link Systems, Inc. 13 DI-624M User's Manual Using the Configuration Menu Wireless Home > Wireless SSID: Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID's factory default setting is default. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. 6 is the default channel. All devices on the network must share the same channel. (Note: The wireless adapters will automatically scan and match the wireless setting.) Super G is a group of performance enhancement features that increase end user application throughput in an 802.11g network. Super G is backwarsd compatible to standard 802.11g devices. For top performance, all wirelss devices on the network should be Super G capable. Select either Disabled, Super G without Turbo, Super G with Dynamic Turbo, or Super G with Static Turbo. Standard 802.11g support, no enhanced capabilities. 14 Channel: Super G Mode: Disabled: D-Link Systems, Inc. DI-624M User's Manual Using the Configuration Menu Capable of Packet Bursting, FastFrames, Compression, and no Turbo mode. Capable of Packet Bursting, FastFrames, Compression, and Dynamic Turbo. This setting is backwards compatible with nonTurbo (legacy) devices. Dynamic Turbo mode is only enabled when all nodes on the wireless network is Super G with Dynamic Turbo enabled. Capable of Packet Bursting, FastFrames, Compression, and Static Turbo. This setting is not backwards compatible with nonTurbo (legacy) devices. Static turbo mode is always on and is only enabled when all nodes on the wireless network is Super G with Static Turbo enabled. Select this mode to restrict your network to only those devices that employ the 802.11g standard. Enabling this mode will ensure that you maintain the highest connectivity rate, unhampered by any connection to an 802.11b device. Choose Enabled to broadcast the SSID across the network. All devices on a network must share the same SSID (Service Set Identifier) to establish communication. Choose Disabled if you do not wish to broadcast the SSID over the network. Select None, WEP, WPA, or WPA-PSK encryption. Select Open System or Shared Key authentication. Wired Equivalent Privacy (WEP) is a wireless security protocol for Wireless Local Area Networks (WLAN). WEP provides security by encrypting the data that is sent over the WLAN. Select Enabled or Disabled. Disabled is the default setting. (Note: If you enable encryption on the DI-624M make sure to also enable encryption on all the wireless clients or wireless connection will not be established.) Select the level of encryption desired: 64-bit, or 128-bit. Select HEX or ASCII. Input up to 4 WEP keys; select the one you wish to use. Super G without Turbo:: Super G with Static Turbo:: Super G with DynamicTurbo:: 802.11g Only Mode: SSID Broadcast: Security: Authentication: WEP Encryption: Key Type: Keys 1-4: D-Link Systems, Inc. 15 DI-624M User's Manual Using the Configuration Menu WAN Dynamic IP Address Home > WAN > Dynamic IP Address Dynamic IP Address: Choose Dynamic IP Address to obtain IP Address information automatically from your ISP. Select this option if your ISP does not give you any IP numbers to use. This option is commonly used for Cable modem services. The Host Name is optional but may be required by some ISPs. The default host name is the device name of the Router and may be changed. The default MAC Address is set to the WAN's physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. Host Name: MAC Address: D-Link Systems, Inc. 16 DI-624M User's Manual Using the Configuration Menu Clone MAC Address: The default MAC address is set to the WAN's physical interface MAC address on the Broadband Router. You can use the "Clone MAC Address" button to copy the MAC address of the Ethernet Card installed by your ISP and replace the WAN MAC address with the MAC address of the router. It is not recommended that you change the default MAC address unless required by your ISP. Enter a DNS Address if you do not wish to use the one provided by your ISP. Enter an MTU value only if required by your ISP. Otherwise, leave it a the default setting. Primary/Secondary DNS Address: MTU: Static IP Address Home > WAN > Static IP Address D-Link Systems, Inc. 17 DI-624M User's Manual Using the Configuration Menu Choose Static IP Address if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format. IP Address: Subnet Mask: Input the public IP Address provided by your ISP. Input your Subnet mask. (All devices in the network must have the same subnet mask.) Input the public IP address of the ISP to which you are connecting. Input the primary DNS (Domain Name Server) IP address provided by your ISP. This is optional. Enter an MTU value only if required by your ISP. Otherwise, leave it at the default setting. ISP Gateway Address: Primary DNS Address: Secondary DNS Address: MTU: D-Link Systems, Inc. 18 DI-624M User's Manual Using the Configuration Menu PPPoE Home > WAN > PPPoE Please be sure to remove any existing PPPoE client software installed on your computers. Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Select Dynamic PPPoE to obtain an IP address automatically for your PPPoE connection. Select Static PPPoE to use a static IP address for your PPPoeE connection. D-Link Systems, Inc. 19 DI-624M User's Manual PPPoE: Using the Configuration Menu Choose this option if your ISP uses PPPoE. (Most DSL users will select this option.) Dynamic PPPoE: Receive an IP Address automatically from your ISP. Static PPPoE: You have an assigned (static) IP Address. User Name: Retype Password: Service Name: IP Address: Primary DNS Address: Secondary DNS Address: MTU: Your PPPoE username provided by your ISP. Re-enter the PPPoE password. Enter the Service Name provided by your ISP (optional). This option is only available for Static PPPoE. Enter the static IP Address for the PPPoE connection. Primary DNS IP address provided by our ISP. This option is only available for Static PPPoE. Enter the static IP Address for the PPPoE connection. Maximum Transmission Unit-1492 is the default setting-you may need to change the MTU for optimal performance with your specific ISP. If enabled, the DI-624M will automatically connect to your ISP after your system is restarted or if the PPPoE connection is dropped. Auto-reconnect: D-Link Systems, Inc. 20 DI-624M User's Manual Using the Configuration Menu LAN Home > LAN LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DI-624M. These settings may be referred to as Private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet. IP Address: The IP address of the LAN interface. The default IP address is: 192.168.0.1. The subnet mask of the LAN interface. The default subnet mask is 255.255.255.0. This field is optional. Enter in the local domain name. Subnet Mask: Local Domain Name: D-Link Systems, Inc. 21 DI-624M User's Manual Using the Configuration Menu DHCP Home > DHCP DHCP stands for Dynamic Host Control Protocol. The DI-624M has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to "Obtain an IP Address Automatically." When you turn your computers on, they will automatically load the proper TCP/IP settings provided by the DI-624M. The DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool. DHCP Server: Starting IP Address: Ending IP Address: Lease Time: Select Enabled or Disabled. The default setting is Enabled. The starting IP address for the DHCP server's IP assignment. The ending IP address for the DHCP server's IP assignment. The length of time for the IP lease. Enter the Lease time. The default setting is one hour. D-Link Systems, Inc. 22 DI-624M User's Manual Using the Configuration Menu Advanced The Advanced tab provides the following configuration options: Virtual Server, Applications, Filters, Parental Control, Firewall, DMZ, and Performance. Virtual Server Advanced > Virtual Server The DI-624M can be configured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically redirected to local servers in the LAN (Local Area Network). The DI-624M firewall feature filters out unrecognized packets to protect your LAN network so all computers networked with the DI-624M are invisible to the outside world. If you wish, you can make some of the LAN computers accessible from the Internet by enabling Virtual Server. Depending on the requested service, the DI-624M redirects the external service request to the appropriate server within the LAN network. The DI-624M is also capable of port-redirection meaning incoming traffic to a particular port may be redirected to a different port on the server computer. Each virtual service that is created will be listed at the bottom of the screen in the Virtual Servers List. There are pre-defined virtual services already in the table. You may use them by enabling them and assigning the server IP to use that particular virtual service. D-Link Systems, Inc. 23 DI-624M User's Manual Select Enabled or Disabled. Using the Configuration Menu Virtual Server: Name: Private IP: Enter the name referencing the virtual service. The server computer in the LAN (Local Area Network) that will be providing the virtual services. The protocol used for the virtual service. The port number of the service used by the Private IP computer. The port number on the WAN (Wide Area Network) side that will be used to access the virtual service. The schedule of time when the virtual service will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. If it is set to Time, select the time frame for the service to be enabled. If the system time is outside of the scheduled time, the service will be disabled. If you have a Web server that you wanted Internet users to access at all times, you would need to enable it. Web (HTTP) server is on LAN (Local Area Network) computer 192.168.0.25. HTTP uses port 80, TCP. Name: Web Server Private IP: 192.168.0.25 Protocol Type: TCP Private Port: 80 Public Port: 80 Schedule: always Protocol Type: Private Port: Public Port: Schedule: Example #1: Click on this icon to edit the virtual service. Click on this icon to delete the virtual service. D-Link Systems, Inc. 24 DI-624M User's Manual Using the Configuration Menu If you have an FTP server that you wanted Internet users to access by WAN port 2100 and only during the weekends, you would need to enable it as such. FTP server is on LAN computer 192.168.0.30. FTP uses port 21, TCP. Name: FTP Server Private IP: 192.168.0.30 Protocol Type: TCP Private Port: 21 Public Port: 2100 Schedule: From: 01:00AM to 01:00AM, Sat to Sun Example #2: All Internet users who want to access this FTP Server must connect to it from port 2100. This is an example of port redirection and can be useful in cases where there are many of the same servers on the LAN network. Applications Advanced > Applications D-Link Systems, Inc. 25 DI-624M User's Manual Using the Configuration Menu Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others. These applications have difficulties working through NAT (Network Address Translation). Special Applications makes some of these applications work with the DI-624M. If you need to run applications that require multiple connections, specify the port normally associated with an application in the "Trigger Port" field, select the protocol type as TCP or UDP, then enter the public ports associated with the trigger port to open them for inbound traffic. The DI-624M provides some predefined applications in the table on the bottom of the web page. Select the application you want to use and enable it. Note: Only one PC can use each Special Application tunnel. Name: Trigger Port: This is the name referencing the special application. This is the port used to trigger the application. It can be either a single port or a range of ports. This is the protocol used to trigger the special application. This is the port number on the WAN side that will be used to access the application. You may define a single port or a range of ports. You can use a comma to add multiple ports or port ranges. This is the protocol used to trigger the special application. Trigger Type: Public Port: Public Type: D-Link Systems, Inc. 26 DI-624M User's Manual Using the Configuration Menu Filters IP Filters Advanced > Filters > IP Filters Filters are used to deny or allow LAN (Local Area Network) computers from accessing the Internet. The DI-624M can be setup to deny internal computers by their IP or MAC addresses. The DI-624M can also block users from accessing restricted Web sites. IP Filters: Use IP Filters to deny LAN IP addresses from accessing the Internet. You can deny specific port numbers or all ports for the specific IP address. The IP address of the LAN computer that will be denied access to the Internet. The single port or port range that will be denied access to the Internet. Select the protocol type. This is the schedule of time when the IP Filter will be enabled. 27 IP: Port: Protocol Type: Schedule: D-Link Systems, Inc. DI-624M User's Manual Using the Configuration Menu MAC Filters Advanced > Filters > MAC Filters Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing the Network. You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the Broadband Router. Filters: Select the filter you wish to use; in this case, MAC filters was chosen. Choose Disable MAC filters; allow MAC addresses listed below; or deny MAC addresses listed below. Enter the name here. Enter the MAC Address. Select a DHCP client from the pull-down list; click Clone to copy that MAC Address. MAC Filters: Name: MAC Address: DHCP Client: D-Link Systems, Inc. 28 DI-624M User's Manual Using the Configuration Menu Parental Control URL Blocking Advanced > Parental Control > URL Blocking URL Blocking is used to deny LAN computers from accessing specific web sites by the URL. A URL is a specially formatted text string that defines a location on the Internet. If any part of the URL contains the blocked word, the site will not be accessible and the web page will not display. To use this feature, enter the text string to be blocked and click Apply. The text to be blocked will appear in the list. To delete the text, just highlight it and click Delete. Parental Control Filters: URL Blocking: Keywords: Select the filter you wish to use; in this case, URL Blocking was chosen. Select Enabled or Disabled. Block URLs which contain keywords listed below. Enter the keywords in this space. D-Link Systems, Inc. 29 DI-624M User's Manual Using the Configuration Menu Domain Blocking Advanced > Parental Control > Domain Blocking Domain Blocking is used to allow or deny LAN (Local Area Network) computers from accessing specific domains on the Internet. Domain blocking will deny all requests to a specific domain such as http and ftp. It can also allow computers to access specific sites and deny all other sites. Parental ControlFilters: Domain Blocking: Select the filter you wish to use; in this case, Domain Blocking was chosen. Disabled: Select Disabled to disable Domain Blocking. Allow: Allows users to access all domains except Blocked Domains. Deny: Denies users access to all domains except Permitted Domains. Enter the Permitted Domains in this field. Enter the Blocked Domains in this field. 30 Permitted Domains: Blocked Domains: D-Link Systems, Inc. DI-624M User's Manual Using the Configuration Menu Firewall Advanced > Firewall Firewall Rules is an advanced feature used to deny or allow traffic from passing through the DI-624M. It works in the same way as IP Filters with additional settings. You can create more detailed access rules for the DI-624M. When virtual services are created and enabled, it will also display in Firewall Rules. Firewall Rules contain all network firewall rules pertaining to IP (Internet Protocol). In the Firewall Rules List at the bottom of the screen, the priorities of the rules are from top (highest priority) to bottom (lowest priority.) Note:The DI-624M MAC Address filtering rules have precedence over the Firewall Rules. Firewall Rules: Name: Action: Source: Destination: Schedule: Enable or disable the Firewall. Enter the name. Select Allow or Deny. Enter the IP Address range. Enter the IP Address range, the Protocol, and the Port Range. Select Always or enter the Time Range. D-Link Systems, Inc. 31 DI-624M User's Manual Using the Configuration Menu DMZ Advanced > DMZ If you have a client PC that cannot run Internet applications properly from behind the DI-624M, then you can set the client up for unrestricted Internet access. It allows a computer to be exposed to the Internet. This feature is useful for gaming purposes. Enter the IP address of the internal computer that will be the DMZ host. Adding a client to the DMZ (Demilitarized Zone) may expose your local network to a variety of security risks, so only use this option as a last resort. DMZ: Enable or Disable the DMZ. The DMZ (Demilitarized Zone) allows a single computer to be exposed to the internet. By default the DMZ is disabled. Enter the IP Address of the computer to be in the DMZ. IP Address: D-Link Systems, Inc. 32 DI-624M User's Manual Using the Configuration Menu Performance Advanced > Performance Note: These features will be available in future firmware releases. TX Rate: Transmit Power: Beacon Interval: Auto is the default selection. Select from the drop down menu. 100% is the default selection. Select from the drop down menu. Beacons are packets sent by an Access Point to synchronize a wireless network. Specify a value. 100 is the default setting and is recommended. This value should remain at its default setting of 2432. If inconsistent data flow is a problem, only a minor modification should be made. The fragmentation threshold, which is specified in bytes, determines whether packets will be fragmented. Packets exceeding the 2346 byte setting will be fragmented before transmission. 2346 is the default setting. RTS Threshold: Fragmentation: D-Link Systems, Inc. 33 DI-624M User's Manual DTIM Interval: Using the Configuration Menu (Delivery Traffic Indication Message) 3 is the default setting. A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages. Select Short or Long Preamble. The Preamble defines the length of the CRC block (Cyclic Redundancy Check is a common technique for detecting data transmission errors) for communication between the wireless router and the roaming wireless network adapters. Note: High network traffic areas should use the shorter preamble type. CTS (Clear To Send) is a function used to minimize collisions among wireless devices on a wireless local area network (LAN). CTS will make sure the wireless network is clear before a wireless client attempts to send wireless data. Enabling CTS will add overhead and may lower wireless throughput. None: CTS is typically used in a pure 802.11g environment. If CTS is set to "None" in a mixed mode environment populated by 802.11b clients, wireless collisions may occur frequently. Always: CTS will always be used to make sure the wireless LAN is clear before sending data. Auto: CTS will monitor the wireless network and automatically decide whether to implement CTS based on the amount of traffic and collisions that occurs on the wireless network. Preamble Type: CTS Mode: D-Link Systems, Inc. 34 DI-624M User's Manual Using the Configuration Menu Tools The Advanced tab provides the following options: Admin, Time, System, Firmware, and Misc. Admin Tools > Admin At this page, the DI-624M administrator can change the system password. There are two accounts that can access the Broadband Router's Web-Management interface. They are admin and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot make any changes. D-Link Systems, Inc. 35 DI-624M User's Manual Administrator: Password: User: Password: Remote Management: Using the Configuration Menu admin is the Administrator login name. Enter the password and enter again to confirm. user is the User login name. Enter the password and enter again to confirm Remote management allows the DI-624M to be configured from the Internet by a web browser. A username and password is still required to access the Web-Management interface. In general, only a member of your network can browse the builtin web pages to perform Administrator tasks. This feature enables you to perform Administrator tasks from the remote (Internet) host. The Internet IP address of the computer that has access to the Broadband Router. If you input an asterisk (*) into this field, then any computer will be able to access the Router. Putting an asterisk (*) into this field would present a security risk and is not recommended. The port number used to access the Broadband Router. http://x.x.x.x:8080 where x.x.x.x is the WAN IP address of the Broadband Router and 8080 is the port used for the WebMangement interface. IP Address: Port: Example: D-Link Systems, Inc. 36 DI-624M User's Manual Using the Configuration Menu Time Tools > Time Time Zone: Default NTP Server: Select the Time Zone from the pull-down menu. NTP is short for Network Time Protocol. NTP synchronizes computer clock times in a network of computers. This field is optional. To manually input the time, enter the values in these fields for the Year, Month, Day, Hour, Minute, and Second. Click Set Time. To select Daylight Saving time manually, select enabled or disabled, and enter a start date and an end date for daylight saving time. Set the Time: Daylight Saving: D-Link Systems, Inc. 37 DI-624M User's Manual Using the Configuration Menu System Browse Tools > System The current system settings can be saved as a file onto the local hard drive. The saved file or any other saved setting file can be loaded back on the Broadband Router. To reload a system settings file, click on Browse to browse the local hard drive and locate the system file to be used. You may also reset the Broadband Router back to factory settings by clicking on Restore. Save Settings to Local Hard Drive: Load Settings from Local Hard Drive: Restore to Factory Default Settings: Click Save to save the current settings to the local Hard Drive. Click Browse to find the settings, then click Load. Click Restore to restore the factory default settings. D-Link Systems, Inc. 38 DI-624M User's Manual Using the Configuration Menu Firmware Tools > Firmware You can upgrade the firmware of the Router here. Make sure the firmware you want to use is on the local hard drive of the computer. Click on Browse to browse the local hard drive and locate the firmware to be used for the update. Please check the D-Link support site for firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard drive from the D-Link support site. Firmware Upgrade: Click on the link in this screen to find out if there is an updated firmware; if so, download the new firmware to your hard drive. After you have downloaded the new firmware, click Browse in this window to locate the firmware update on your hard drive. Click Apply to complete the firmware upgrade. Browse: D-Link Systems, Inc. 39 DI-624M User's Manual Using the Configuration Menu Misc. Tools > Misc. D-Link Systems, Inc. 40 DI-624M User's Manual Ping Test: Using the Configuration Menu The Ping Test is used to send Ping packets to test if a computer is on the Internet. Enter the IP Address that you wish to Ping, and click Ping. Click Reboot to restart the DI-624M. If you choose to block WAN Ping, the WAN IP Address of the DI-624M will not respond to pings. Blocking the Ping may provide some extra security from hackers. Discard Ping from WAN side: Click Enabled to block the WAN ping. Restart Device: Block WAN Ping: UPNP: To use the Universal Plug and Play feature click on Enabled. UPNP provides compatibility with networking equipment, software and peripherals of the over 400 vendors that cooperate in the Plug and Play forum. Gaming mode allows a form of pass-through for certain Internet Games. If you are using Xbox, Playstation2 or a PC, make sure you are using the latest firmware and Gaming Mode is enabled. To utilize Gaming Mode, click Enabled. If you are not using a Gaming application, it is recommended that you Disable Gaming Mode. Dynamic Domain Name System is a method of keeping a domain name linked to a changing IP Address. This is a useful feature since many computers do not use a static IP address. The DI-624M supports VPN (Virtual Private Network) passthrough for both PPTP (Point-to-Point Tunneling Protocol) and IPSec (IP Security). Once VPN pass-through is enabled, there is no need to open up virtual services. Multiple VPN connections can be made through the DI-624M. This is useful when you have many VPN clients on the LAN network. Gaming Mode: Dynamic DNS: VPN Pass Through:: D-Link Systems, Inc. 41 DI-624M User's Manual Using the Configuration Menu Tools The Advanced tab provides the following options: Device Info, Log, Stats, and Wireless. Device Info Status > Device Info This page displays the current information for the DI-624M. It will display the LAN, WAN and MAC address information. If your WAN connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed. Use Release to disconnect from your ISP and use Renew to connect to your ISP. If your WAN connection is set up for PPPoE, a Connect button and a Disconnect button will be displayed. Use Disconnect to drop the PPPoE connection and use Connect to establish the PPPoE connection. D-Link Systems, Inc. 42 DI-624M User's Manual Using the Configuration Menu This window will show the DI-624M's working status: WAN: IP Address: WAN/Public IP Address Subnet Mask: WAN/Public Subnet Mask Gateway: WAN/Public Gateway IP Address Domain Name Server: WAN/Public DNS IP Address WAN Status: WAN Connection Status LAN: IP Address: LAN/Private IP Address of the DI-624M Subnet Mask: LAN/Private Subnet Mask of the DI-624M Wireless: MAC Address: Displays the MAC address SSID: Displays the current SSID Channel: Displays the current channel WEP: indicates whether WEP is enabled or disabled D-Link Systems, Inc. 43 DI-624M User's Manual Using the Configuration Menu Log Status > Log The Broadband Router keeps a running log of events and activities occurring on the Router. If the device is rebooted, the logs are automatically cleared. You may save the log files under Log Settings. View Log: First Page - The first page of the log. Last Page - The last page of the log. Previous - Moves back one log page. Next - Moves forward one log page. Clear - Clears the logs completely. Log Settings - Brings up the page to configure the log. D-Link Systems, Inc. 44 DI-624M User's Manual Using the Configuration Menu Log Settings Status > Log > Log Settings Not only does the Broadband Router display the logs of activities and events, it can setup to send these logs to another location. SMTP Server/ IP Address: Email Address: The address of the SMTP server that will be used to send the logs. The email address to which the logs will be sent. Click on Send Mail Now to send the email. D-Link Systems, Inc. 45 DI-624M User's Manual Using the Configuration Menu Stats M Status > Stats The screen above displays theTraffic Statistics. Here you can view the amount of packets that pass through the DI-624M on both the WAN and the LAN ports. The traffic counter will reset if the device is rebooted. Wireless Status > Wireless The wireless client table displays a list of current connected wireless clients. This table also displays the connection time and MAC address of the connected wireless client. Click on Help at any time, for more information. D-Link Systems, Inc. 46 DI-624M User's Manual Troubleshooting Troubleshooting This Chapter provides solutions to problems that can occur during the installation and operation of the DI-624M Wireless Broadband Router. We cover various aspects of the network setup, including the network adapters. Please read the following if you are having problems.Note: It is recommended that you use an Ethernet connection to configure the DI-624M Wireless Broadband Router. Note: It is recommended that you use an Ethernet connection to configure the DI-624M Wireless Broadband Router. 1. The computer used to configure the DI-624M cannot access the Configuration menu. Check that the Ethernet LED on the DI-624M is ON. If the LED is not ON, check that the cable for the Ethernet connection is securely inserted. Check that the Ethernet Adapter is working properly. Please see item 3 (Check that the drivers for the network adapters are installed properly) in this Troubleshooting section to check that the drivers are loaded properly. Check that the IP Address is in the same range and subnet as the DI-624M. Please see Checking the IP Address in Windows XP in the Networking Basics section of this manual. Note: The IP Address of the DI-624M is 192.168.0.1. All the computers on the network must have a unique IP Address in the same range, e.g., 192.168.0.x. Any computers that have identical IP Addresses will not be visible on the network. They must all have the same subnet mask, e.g., 255.255.255.0. Do a Ping test to make sure that the DI-624M is responding. Go to Start>Run>Type Command>Type ping 192.168.0.1. A successful ping will show four replies. Note: If you have changed the default IP Address, make sure to ping the correct IP Address assigned to the DI-624M. D-Link Systems, Inc. 47 DI-624M User's Manual Troubleshooting 2. The wireless client cannot access the Internet in the Infrastructure mode. Make sure the wireless client is associated and joined with the correct Access Point. To check this connection: Right-click on the Local Area Connection icon in the taskbar> select View Available Wireless Networks. The Connect to Wireless Network screen will appear. Please make sure you have selected the correct available network, as shown in the illustrations below. default Check that the IP Address assigned to the wireless adapter is within the same IP Address range as the access point and gateway. (Since the DI-624M has an IP Address of 192.168.0.1, wireless adapters must have an IP Address in the same range, e.g., 192.168.0.x. Each device must have a unique IP Address; no two devices may have the same IP Address. The subnet mask must be the same for all the computers on the network.) To check the IP Address assigned to the wireless adapter, double-click on the Local Area Connection icon in the taskbar > select the Support tab and the IP Address will be displayed. (Please refer to Checking the IP Address in the Networking Basics section of this manual.) If it is necessary to assign a Static IP Address to the wireless adapter, please refer to the appropriate section in Networking Basics. If you are entering a DNS Server address you must also enter the Default Gateway Address. (Remember that if you have a DHCP-capable router, you will not need to assign a Static IP Address. See Networking Basics: Assigning a Static IP Address.) D-Link Systems, Inc. 48 DI-624M User's Manual Troubleshooting 3. Check that the drivers for the network adapters are installed properly. You may be using different network adapters than those illustrated here, but this procedure will remain the same, regardless of the type of network adapters you are using. Go to Start > My Computer > Properties. Select the Hardware Tab. Click Device Manager. D-Link Systems, Inc. 49 DI-624M User's Manual Double-click on Network Adapters. Troubleshooting Right-click on D-Link DWL-G650M Super G MIMO Wireless Notebook Adapter. (In this example we use the DWL-G650M; you may be using other network adapters, but the procedure will remain the same.) Select Properties to check that the drivers are installed properly. D-Link Super G MIMO DWL-G650M Look under Device Status to check that the device is working properly. Click OK. D-Link Super G MIMO DWL-G650M Wireless Cardbus Adapter D-Link Super G MIMO DWL-G650M Wireless Cardbus Adapter D-Link Systems, Inc. 50