What would you like to do ? -------------------------- Help us find the most requested user's guides Upload your
user manual Search for a user manual Register Login and access your manuals Reset your password

	Browse all user guides
	The DAEWOO 103FH product forum
	Upload your user manual
	Sign-up Log in
	Help us find the most requested user's guides
	Include the add-on to download manuals from your site, forum or blog
	Frequently Asked Questions
	Contact Diplodocs team
ALL GUIDES BY CATEGORY Domestic Appliance TV & Audio Car & Motorcycle Phone Computer Camera & Video Music Sport Gardening & Housekeeping Video Game & Software Jewelry & Watch Baby & Toys Hygiene & Health Other

USER'S GUIDE COLOR MONITOR Model No : 103FH http://display.dwe.co.kr IMPORTANT SAFEGUARDS 1. Read all of these instructions. 2. Save these instructions for later use. 3. Unplug this monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use attachments not recommended by the monitor manufacturer as they may cause hazards. 5. Do not use this monitor near water, e.g., near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc. 6. Do not place this monitor on an unstable cart, stand, or table. The monitor may fall, causing serious injury to a child or adult, and serious damage to the appliance. 7. Slots and openings in the cabinet and the back or bottom are provided for ventilation, to ensure reliable operation of the monitor, and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the monitor on a bed, sofa, rug, or other similar surface. This monitor should never be placed near or over a radiator or heat register. This monitor should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided. 8. This monitor should be operated only from the type of power source indicated on the marking label. If you are not sure of the power supplied to your home, consult your monitor dealer or local power company. 9. This monitor is equipped with a 3-wire grounding-type plug, That is, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the purpose of the grounding-type plug. 10. Do not allow anything to rest on the power cord. Do not locate this monitor where the cord will be abused by people walking on it. 11. Follow all warnings and instructions marked on the monitor. 12. For added protection for this monitor during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the monitor and/or the computer due to lightning and power line surges. 13. Do not overload wall outlets and extension cords as this can result in fire or electric shock. 14. Never push objects of any kind into this monitor through cabinet slots, as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the monitor. 15. Do not attempt to service this monitor yourself, as opening or removing covers may expose you to dangerous voltages or other hazards. Refer all servicing to qualified service personnel. 16. Unplug this monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the monitor. c. If the monitor has been exposed to rain or water. d. If the monitor does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore normal operation. e. If the monitor has been dropped or the cabinet has been damaged. f. When the monitor exhibits a distinct change in performance, this indicates a need for service. 17. When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 18. Upon completion of any service or repairs to this monitor, ask the service technician to perform routine safety checks to determine that the monitor is safe to operate. FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cuase harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures : - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio or TV technician for help. CAUTION : Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CANADIAN NOTICE This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. AVIS CANADIEN Cet appareil numérique de la Class B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. WICHTIGE INFORMATIONEN Bitte lesen Sie alle diese Informationen, bevor Sie das Gerät in Betrieb nehmen! Lesen Sie sich außerdem die Bedienungsanleitung komplett und sorgfältig durch, da nur in diesem Fall eine problemlose Inbetriebnahme erwartet werden kann. · · · · · · · Achten Sie darauf, daß das Gerät nur in eine 230V SchukoSteckdose eingesteckt wird. Die Steckdose sollte jederzeit frei zugänglich sein um bei einem evtl. auftretenden Notfall das Gerät schnell vom Netz zu trennen. Achten Sie desweiteren darauf, daß die Netzanschlußleitung nicht mechanisch beansprucht oder sonstwie beschädigt wird. Offnen Sie das Gerät niemals! Im Inneren befinden sich Teile mit gefährlicher Spannung. Bevor Sie das Gerät reinigen, ziehen Sie bitte den Netzstecker aus der Steckdose. Säubern Sie dann das Gerät mit einem feuchten (keinesfalls tropfnassen) Lappen. Die in diesem Gerät entstehende Röntgenstrahlung ist ausreichend abgeschirmt (Ortsdosisleistung in 0.1m Abstand weniger als 1.0µ Sv/h). Beschleunigungsspannung maximal 29kV. Stellen Sie das Gerät an einem ergonomisch günstigen Ort auf und sorgen Sie dafür, daß der Monitor mit nach GS-VW-SG7 geprüfter Peripherie betrieben wird, da nur unter diesen Umständen ein optimaler ergonomischer Betrieb des Gerätes sichergestellt ist. DECLARATION OF CONFORMITY We, Manufacturer / Importer DAEWOO ELECTRONICS CO., Ltd 541, 5-Ga, Namdaemoon-Ro, Jung-Gu Seoul, Korea declare under our sole responsibility that the product, Color Display monitor 103FH to which this declaration relates is in conformity with the following standard(s) or other normative document(s) Safety : EN60950/1992/A1:1993/A2:1993 A3:1995/A4:1997 EMC : EN 55022/8.1994, EN 50082-1/1992 EN 60555 Part 2, 3/1987 following the provisions of 89/336 EEC-EMC Directive and the provisions of 73/23 EEC-Low Voltage Directive. Handed over by : S.Lee, Managing Director. Display Business Division Falls Sie dennoch Fragen haben, auf die die Bedienungsanleitung keine hinreichende Antwort geben kann, so kontaktieren Sie bitte den nächsten Fachhändler. Maschinenlärminformationsverordnung 3. GSGV, 18.01 1991: Der arbeitsplatzbezogene Schalldruckpegel beträgt 70 dB (A) oder wenigergemäß ISO 7779. Aug, 2000 Seoul Signature: S.Lee, Managing Director. Display Business Division. DAEWOO ELECTRONICS Co., Ltd Emission Characteristics Tested by SEMKO A sample of this type has been tested and has shown compliance with theguidelines in the swedish document MPR II. This product is also designed for IT power system with phase to phase voltage of 230V. The power cord is used as a main disconnect device. Disconnect the power cord before servicing. The outlet must be installed near the monitor and must be easily accessible. As an ENERGY STAR® Partner, Daewoo Electronics Co., Ltd. has determined that this product meets the Energy Star® guidelines for energy efficiency. The appliance is not intended for use by young children or infirm persons without supervision ; Young children should be supervised to ensure that they do not play with the appliance. CONTENTS Introduction ............................................................................. 1 Product Features ................................................................. 2 Setup ......................................................................................... 3 Connecting the D-sub Signal Cable .................................... 3 Connecting the BNC Signal Cable ..................................... 4 Connecting the Power Cord ................................................ 5 Power Management System ............................................... 5 DDC for Plug & Play ......................................................... 5 Operation & Adjustment ...................................................... 6 Specifications ......................................................................... 12 Factory Preset Timings ......................................................... 12 Troubleshooting ..................................................................... 13 Appendix Description for D-sub Connector INTRODUCTION This manual explains how to correctly install, operate and get the best performance from your monitor. Please read this user's guide carefully before installing your monitor, then keep it near your monitor for quick reference. First, please check that the contents of the box corresponds with the following checklist : · · · · · Color monitor Power cord Signal cable User's guide Warranty card (Optional) If any item is missing or damaged, please contact your dealer. Please keep the box and packing materials so that you may properly store or transport your monitor. English - 1 PRODUCT FEATURES SETUP CONNECTING THE D-SUB SIGNAL CABLE 1. Turn off the computer and monitor. 2. Connect the 15 pin D-sub connector to the output port of the video card in your computer and monitor. 3. Tighten the screws of connector. · · · The convenient and user-friendly on-screen display allows for easy and accurate adjustments of horizontal and vertical screen size and position, geometry and screen color. The monitor supports a safe working environment in strict compliance with the MPR II standard for low emissions (TCO optional). The monitor complies with the VESA Display Data Channel (DDC) specification for Plug and Play compatibility. Advanced microcircuitry makes setup and configuration fast and effortless. The monitor features Advanced Color Controls for fine-tuning to meet your own personal tastes or application requirements. Use the on-screen controls to adjust the color temperature, RGB gain value for the best possible screen color and intensity. Press the menu button and activate the Self-Diagnosis menu to determine whether your monitor is functioning normally, not receiving a signal or is receiving a signal that is out of scanning range. Activate the higher refresh rates of the monitor to stabilize the screen and eliminate the annoying flicker that contributes to eye-strain and headaches. The "borderless" full-screen display capability works under all graphic modes and provides a larger viewing area than conventional monitors, giving you a better picture with more workspace. · · · · D-sub signal cable English - 2 English - 3 CONNECTING THE BNC SIGNAL CABLE 1. Turn off the computer and monitor. 2. Connect the 5 BNC connectors from the signal cable to the monitor. 3. Push in and turn the connectors clockwise until they are locked in place. CONNECTING THE POWER CORD 1. Plug the power cord into the AC receptacle located at the back of the monitor. 2. Plug the other end of the power cord into the AC outlet. If your power cord is PC-to-Monitor type, plug the other end of the power cord into the AC receptacle in the computer. POWER MANAGEMENT SYSTEM If you use the monitor with a computer that complies with the power-saving program, you can set the monitor to go blank when the system has remained unused for a period of time. To specify the period or to disable this feature, set the system timeout field of the computer's system setup program or use special software for power-saving. See the computer user's manual for the details of using the system setup. While the monitor is in power-saving mode (blank screen), it consumes less power than when it is in its normal state. The color of the power LED will indicate the state. To restore the screen image, press any key of your keyboard or move your mouse. If the signal cable is connected loosely or disconnected, the power-saving feature will not operate. R G B HS/HVS VS BNC signal cable (Optional Accessory) DISPLAY DATA CHANNEL FOR PLUG AND PLAY If you use the monitor with a computer that complies with DDC1/2B/CI of VESA, the host video card automatically configures itself without your intervention in a way that best fits the attached monitor. The Display Data Channel(DDC) allows the monitor to inform the host system about configuration information for optimum use of the monitor. Use of the video card utility is not required to match the resolutions and refresh rates of the monitor and video card. English - 4 English - 5 OPERATION & ADJUSTMENT Control Panel Key Process ENGL SH DEUTSCH ESPAÑOL FRANCA S TAL ANO · · · · · · · · · Hot Key Move cursor to the right window on the OSD window. Increase the value of any selected function. Move cursor to the left window on the OSD window. Decrease the value of any selected function. Launch OSD(On-Screen Display) MENU window. MENU Move cursor to the high window on the OSD window. Increase the value of V.size or V.center. Move cursor to the low window on the OSD window. Decrease the value of V.size or V.center. Start BRIGHTNESS CONTRAST · English - 6 When you choose the icon OSD screen. on the OSD window, you can exit the English - 7 OSD Functions ICON CONTROL LANGUAGE H. CENTER & V. CENTER FUNCTION ICON CONTROL H. MOIRE FUNCTION Select language for OSD (5 languages). Adjust the position of the display horizontally(left or right) and vertically (up or down). Choose different preset color temperatures or set your own customized color parameters. Adjust the red gain. Adjust the green gain. Adjust the blue gain. Adjust the red bias. Adjust the horizontal picture moire cancellation. Adjust the vertical picture moire cancellation. Adjust the focus image. V. MOIRE COLOR TEMP FOCUS RED GAIN H.CONVERGENCE Adjust the horizontal convergence image. GREEN GAIN V.CONVERGENCE Adjust the vertical convergence image. BLUE GAIN ZOOM Adjust the display width & height at the same time. Adjust the left and right margins for more convex or more concave margins. Adjust the trapezoid of the screen by moving the lines inward or outward. Adjust the side balance when the sides of the screen are bowed towards left or right. Adjust the parallelogram when the screen is leaning left or right. RED BIAS PINCUSHION GREEN BIAS Adjust the green bias. TRAPEZOID BLUE BIAS H. SIZE & V. SIZE H. LINEARITY Adjust the blue bias. Adjust the width (horizontal size) and the height (vertical size) of the display. Adjust the horizontal linearity. PIN BALANCE PARALLELOGRAM V. LINEARITY Adjust the vertical linearity. PIN S CONTROL Adjust the pin S control when the sides of the screen are in a S shape. English - 8 English - 9 Self Diagnosis ICON CONTROL PIN W CONTROL FUNCTION Adjust the pin W control when the sides of the screen are in a W shape. Adjust the rotation when the screen is tilted left or right. Degaussing keeps the monitor free from unwanted magnetism that can result in color impurity. Display horizontal & vertical frequency and polarity. YES : VESA DPMS operation. NO : NO DPMS operation. Display a RGB Color Bar to determine whether the screen color is expressed normally or not. Select a input signaling type between Dsub and BNC connector. Reset the screen to the Factory Preset Display Settings. When the monitor doesn't display, if you press any key, Self Diagnosis screen is displayed. Self Diagnosis function checks if the status of the monitor is No Signal or Out of range. No Signal screen is displayed when the D-Sub signal connector is not connected or the status of the monitor is on DPMS mode. Out of Range screen is displayed when the applied frequency is under or over normal range. Normal range H : 30 - 107 KHz V : 50 - 160 Hz ROTATION DEGAUSS STATUS POWER SAVER TEST PATTERN BNC/D-SUB RECALL English - 10 English - 11 SPECIFICATIONS CDT Size Diagonal visible image area Dot Pitch Synchronization Horizontal Vertical Plug and Play Power Saving Power Source Power Consumption Dimension-W x H x D (set with stand) Weight-unpacked (lbs/Kg) Operating Temperature 21-inch 20-inch 0.25 mm 30 - 107 KHz 50 - 160 Hz DDC1/2B/CI EPA, VESA DPMS, Nutek Compliant 100-240 Vac, 50/60Hz (Free Voltage) 135 W 494 x 500 x 518mm 61.7/28.0 10 ~ 40°C /50 ~ 104°F TROUBLESHOOTING Symptom No picture. Check Check if power switch and computer power switch are in the on position. Check if the signal cable is correctly connected to the video card. Check if the pins of D subconnector are not bent. Check if the computer is in the power- saving mode. POWER LED is not Check if power switch is in the on position. lit. Check if the power cord is correctly connected. Image is unstable. Image is not centered, too small or too large. Check if the signal cable is suitable to the video card. Adjust H &V Size or H&V Center to get the proper image. * The specifications are subject to change without notice. FACTORY PRESET TIMINGS Mode VGA 480 VGA 400 VESA 43K VESA 46K VESA SVGA 85 VESA 60K VESA 1024/85 VESA 1280/75 VESA 1600/70 VESA 1280/85 VESA 1600/75 VESA 1600/85 Resolution (dots X lines) 640 X 480 720 X 400 640 X 480 800 X 600 800 X 600 1024 X 768 1024 X 768 1280 X 1024 1600 X 1200 1280 X 1024 1600 X 1200 1600 X 1200 H.Freq (KHz) 31.5 31.3 43.0 46.9 53.7 60.0 68.7 80.0 87.5 91.1 93.8 106.3 V.Freq(Hz) 60 70 85 75 85 75 85 75 70 85 75 85 Remark Non-interlaced Non-interlaced Non-interlaced Non-interlaced Non-interlaced Non-interlaced Non-interlaced Non-interlaced Non-interlaced Non-interlaced Non-interlaced Non-interlaced Picture bounces or a Keep the devices that may cause electrical wave pattern is interference away from the monitor. present in the picture. See the FCC information at the front cover of the manual. Color looks blotchy. Picture is blurred. Operate Degauss once. Adjust Contrast and Brightness. Operate Degauss once. Edges of available area on the screen are not straight. Adjust Geometry Control (Pincushion, Trapezoid..). English - 12 English - 13 APPENDIX DESCRIPTION FOR D-SUB CONNECTOR Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 Signal Red Green Blue GND GND GND-Red GND-Green GND-Blue +5Vdc GND-H.Sync GND-V.Sync Bi-directional Data(SDA) Horizontal Sync Vertical Sync(VCLK) Data Clock(SCL) 6 15 10 * GND=Ground TABLE DES MATIERES Introduction ............................................................................. 1 Résumé des caractéristiques ............................................... 2 Installation ............................................................................... 3 Raccordement du câble de signal D-sub ............................. 3 Raccordement du câble de signal BNC .............................. 4 Raccordement du cordon d'alimentation ............................ 5 Gestion de l'alimentation .................................................... 5 Display Data Channel pour le prêt à jouer .......................... 5 Opération et Ajustement ....................................................... 6 Spécifications .......................................................................... 12 Caractéristiques du signal .................................................... 12 Dépannage .............................................................................. 13 INTRODUCTION Ce manuel décrit les procédures d'installation et d'utilisation de votre écran et indique comment optimiser ses performances. Lisez toutes les sections du manuel attentivement avant d'installer l'écran et gardez-le à portée de main pour pouvoir y faire référence au besoin. Assurez-vous de la présence de tous les éléments suivants: · · · · · Écran couleur Cordon d'alimentation Câble de signal Manuel de l'utilisateur Carte de garantie (Optionnel) En cas d'élément manquant ou endommagé, contactez votre fournisseur. Conservez le carton et les emballages d'origine; vous en aurez besoin si vous transportez l'écran vers un autre site dans l'avenir. Français - 1 RESUME DES CARACTERISTIQUES INSTALLATION RACCORDEMENT DU CABLE DE SIGNAL D-SUB 1. Mettez l'ordinateur et l'écran hors tension. 2. Reliez le connecteur 15 broches à la sortie vidéo de votre ordinateur. 3. Serrez les vis du connecteur. · À la fois pratique et convivial, l'affichage à l'écran permet de régler facilement et précisément la dimension et la position horizontale ou verticale, la géométrie et la couleur de l'affichage. Ce moniteur favorise un environnement de travail sain car il est rigoureusement conforme aux normes MPR II relatives aux radiations électromagnétiques (TCO Optionnel). Ce moniteur est conforme à la spécification VESA Display Data Channel (DDC) pour la compatibilité au standard Plug and Play (Prêt à jouer). Les microcircuits permettent une installation et une configuration simple et rapide. Ce moniteur permet un contrôle précis des couleurs selon vos goûts ou les exigences de vos applications. Utilisez les commandes à l'écran pour régler la température de la couleur, le gain RVB afin d'obtenir la couleur et l'intensité optimales à l'écran. Appuyez sur le bouton Menu et choisissez le menu d'autodiagnostic (Self-Diagnosis) afin de déterminer si votre moniteur fonctionne normalement, s'il reçoit un signal ou si ce signal est en dehors de la gamme normale de fréquences. Activez une fréquence de régéneration plus élevée afin de stabiliser l'image et éliminer le scintillement responsable de la fatigue oculaire et des maux de tête. L'affichage plein écran (sans bordure) fonctionne dans tous les modes graphiques et offre une plus grande zone de visualisation que les moniteurs conventionnels, permettant ainsi une meilleure image et un espace de travail plus important. · · · · · · Câble de signal D-Sub Français - 2 Français - 3 RACCORDEMENT DU CABLE DE SIGNAL BNC 1. Mettez l'ordinateur et l'écran hors tension. 2. Reliez 5 connecteurs BNC de la câble de signal à le moniteur. 3. Tordez les connecteurs avant que ils ont serréz. RACCORDEMENT DU CORDON D'ALIMENTATION 1. Branchez le cordon d'alimentation a la prise situee au dos du moniteur. 2. Branchez l'autre extremite du cordon a la prise secteur. Si votre cordon d'alimentation est PC-to-Monitor type, branchez l'autre extrémité du cordon au connecteur d'alimentation de votre ordinateur. GESTION DE L'ALIMENTATION Si vous utilisez l'écran avec un ordinateur conforme aux programmes d'économie d'énergie, vous pouvez le régler de sorte que l'affichage soit interrompu après un délai d'inactivité prédéfini. Pour définir ce délai ou désactiver la fonction, vous devez soit positionner le paramètre de délai d'attente du programme de configuration(setup) de votre ordinateur, soit recourir à un logiciel de gestion d'alimentation spécialisé. Pour plus d'informations sur l'utilisation du programme de configuration, reportez-vous au manuel de votre ordinateur. Lorsque le mode d'économie d'énergie est actif(écran noir), l'écran consomme moins d'électricité que lorsqu'il fonctionne en mode normal. L'état de la consommation électrique est indiqué par le voyant d'alimentation. Pour rétablir l'image affichée, il suffit d'appuyer sur une touche quelconque du clavier ou sur un bouton de la souris. La fonction d'économie d'énergie n'est pas activée automatiquement si le câble vidéo est mal branché ou débranché. R G B HS/HVS VS Câble de signal BNC (Accessoire Optionnel) DISPLAY DATA CHANNEL POUR LE PRET A JOUER (PLUG AND PLAY) Si vous utilisez l'écran avec un ordinateur conforme à la norme DDC1/2B/CI de VESA, le maître de la carte vidéo automatiquement configue soimême sans votre intervention en forme conforme au mieux avec l'écran attaché. Display Data Channel(DDC) donne à l'écran la permission d'informer le maître-système en ce qui concerne l'information configuré pour l'usage optimal de l'écran. L'emploi de l'utilité de la carte vidéo n'exige pas d'harmonie avec la résolution et la vitesse de régénération de l'écran et la carte vidéo. Français - 4