User manual DAEWOO DTS-42

PLASMA TELEVISION USER MANUAL DTS-42 Proper use guarantees product life. Before using the product, be advised that you read this user manual well and try to operate it. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is lntended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The symbol is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the lierature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION: - TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. - THE STAND INTENDED FOR USE ONLY WITH THIS PDP TV. USE WITH OTHER APPARATUS IS CAPABLE OF RESULTING IN INSTABILITY CAUSING POSSIBLE INJURY. Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a damp cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus(including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use the attachments/accessories specified by the manufacturer. 12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 1. 2. 3. 4. 5. 6. 7. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Features · 42" VGA wide Plasma Panel · Built in Analog Tuner PDP has the analog tuner inside for watching terrestrial broadcasting without the need to purchase a separate broadcasting receiver. · DVD Direct Connection / Outstanding Picture Quality via a Digital Broadcast Receiver A DVD can be directly connected to the unit so that you can view clear digital images. You can enjoy even higher quality images by connecting a digital broadcasting receiver with which digital broadcasts can be viewed. · A PC Direct Connection PC can be connected to the PDP without a separate device and can be used as a TV making it ideal for presentation, various events and exhibitions. o · 160 Wide-Angle Viewing Area · Flat Panel with No Distortion and Color Blurring Since Plasma TV has no problems such as distortion, blurring, flickering unlike existing CRT type displays you can enjoy Home Cinema picture quality and sound. · Various Control Functions - 4 Languages OSD, 20 Step screen zoom function, Full-screen still function, Various aspect ratio, Keypad lock fuction, Sleep timer, and so forth. · Free Volt (100-240V~, 50/60Hz) · DVI (Digital Visual Interface) Connection When connected to a PC, you can receive DVI digital signals as well as the former analog signals by using DVI input and D-Sub input. Furthermore, using the DVI Input, you can receive directly a digital signal from the computer. Consequently, pictures on the screen are much more clear and fresh. · CCF(Capsulated Color Filter) Technology for natural color CCF Technology makes the picture clearer by controlling of the brightness among three different color filters. · MGDI (Meta Genuine Digital Image) Engine MGDI is the image enhancement technology of Daewoo Electronics, which provides more clear, splendid, and delicated images. This User Manual presents safety precautions and how to use the product. After reading it thoroughly, use the product safely. Keep this manual where the user can see it easily. Failure to comply with warnings and cautions for the safe use of electric appliances may cause fire or human injury. 4 F C C R F I N T E R F E R E N C E S TAT E M E N T NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult authorized service centers for help. - Only shielded interface cable should be used. Finally, any changes or modifications to the equipment by the user not expressly approved by the grantee or manufacturer could void the users authority to operate such equipment, Safety Precautions Power Always obey all safety messages. · All the safety and operating instructions should be read before the product is operated. If anything strange happens, unplug this product from the wall outlet. · Do not disassemble or replace any parts of the TV. Refer to a qualified service personnel for repair. During a lightning storm, or when it is left unattended and unused for a long period of time, unplug it from the wall outlet. It can result in fire. When unplugging your TV, always grip plug firmly and pull straight out from the receptacle. It can result in fire or electric shock due to damaged power cord. This product must be properly grounded. · Improper grounding may cause malfunction or electric shock. · When proper grounding is not possible, install circuit breaker. · Do not ground to gas pipe, water pipe, lightning rod, or telephone line. During a lightning storm, unplug the TV from the wall outlet, and do not touch the antenna. It can cause fire or electric shock. WARNING You can be dead or seriously injured if you do not follow instructions. Installation Do not use this product in the neighborhood of a bath or shower. It can result in electric shock or fire. Do not place this TV on an unstable cart, stand, or table It may cause the product and cart to overturn, damaging equipment or causing possible injury. 6 During Use Do not open the cover (or back) because high voltage is present within the TV enclosure. It may cause electric shock. Never push any kind of objects into this product through openings at the back of TV. It may cause fire or electric shock. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Spilled liquids may cause electric shock or fire. Do not allow children to play or hang on the TV. These actions may tip it over, causing personal injury. Do not place a candle or lighted cigarette on the TV. If these fall into the inside of the TV, it may cause a fire or explosion. Do not disassemble batteries, and do not leave around in case children swallow them. Heavy metal may contaminate environment, and can be harmful or detrimental to human health. (If children swallow the batteries, go to hospital and consult with a doctor.) Batteries could explode if Fitted incorrectly. Align the batteries according to the (+) and (-) indication inside the case. Do not spray water Onto the TV or wipe with damp cloth. Unplug the TV from the wall outlet when smoke or a strange smell occurs, then refer to a service personnel. Leaving the TV on in this condition, may cause fire or electric shock. It may cause an electric shock or fire. 7 Safety Precautions Power Always obey all safety messages. · All the safety and operating instructions should be read before the product is operated. When moving your TV, remove the power plug, antenna, and cables, and be sure to move it by using two people.. Failure to follow this instruction can result in electric shock or personal injury. Do not touch the power plug with wet hands when plugging or unplugging it into the wall socket. It can result in a risk of electric shock. CAUTION You can be injured, or this product or any other of your property can be damaged if you don't follow instructions. Installation Do not install the product where there is oil, smog, moist, or dust It may cause malfunction. Do not install the product where it will be exposed to the direct sunlight, and the product should not be near heat sources such as radiators, stoves, etc. It may cause malfunction. For proper ventilation, separate the product from the wall, and keep a distance of more than 10cm (4"). Due to the increase of temperature inside the TV, it may cause fire. Minimum distances around the apparatus for sufficient ventilation. Due to the increase of temperature inside the TV, it may cause fire. If you wish to install this product on the wall or ceiling, refer to a professional. Failure to do so may cause damage to product and injury to human. When using an outside antenna system, do not install it in the vicinity of overhead power lines. If the antenna touches such power lines, it may cause electric shock. 8 During Use Do not wipe the TV using a cloth damped with chemicals (benzene, thinner, etc.). TV appearance may be marred. (Unplug the power plug and wipe with soft cloth.) Do not place heavy objects or heat sources on the power cord. It may damage the power cord, causing fire or electric shock. The plasma television panel consists of fine cells. Although the panels are produced with more than 99.9 percent active cells, there may be some cells that do not produce light or remain lit. Do not allow a still picture to be displayed for an extended period, as this can cause a permanent ghost image to remain on the Wide Plasma Television. Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode. Do not place any object or cover on the TV. In an event of improper ventilation, the TV will be overheated causing fire. When watching the TV, the distance between the TV screen and your eye should be as 5~7 times as the diagonal distance of the TV. Watching the TV for a long time may hurt your eye sight. Warranty does not cover any damage caused by image retention. When cleaning of the inside of the TV is required, consult to the qualified service personnel. When the TV is not cleaned for a long period of time, dust in it may cause fire or malfunction. When the TV is placed on a cart or table, the front side of the TV should not project outward. Unbalance may cause the TV to drop, resulting in personal injury or equipment malfunction and damage. Do not grip speakers when moving the TV attached with speakers. When moving the TV while gripping speakers, speakers may be fallen away from the TV due to its weight, causing personal injury. 9 Checking Accessories Note Supplied Accessories Remote Control POWE R CAT EO/ VID DVD TV SAT V Check to be sure that the following items are packed with your Plasma panel. 1 UNIT Ferrite Core 2UNITS DIS Y PLA MU VID EO CH LTIM EDI A TV/ ZOO M + ZOO M - V O L PR EV CH CH TE MU W SLO F.R/ REC PRE Y PLA STO P SC RE EN V O L F.F/ SIZE N TIO CAP W SLO SE T PAU OSE N/CL V OPE ND SOU DE MO NEX MEN U STI LL E TUR PIC DE MO EP / ADDSE SLE ERA MTS Component Cable 1UNIT Place the small ferrite cores in the speaker cables close to the speaker terminals of the PDP unit. Speaker(2 units) Coaxial Cable 1 UNIT A/V Cable 2 UNITS AC Cable 1 UNIT 10 Note Optional Accessories Speakers The following items are optional accessories. Refer purchasing optional accessories from Daewoo Electronics Local retailer or the retailer from where you purchased the unit. DTS-42SP - Speaker Main Unit Dimension : 100(W) x 628(H) x 83(D) mm 39.37(W) x 24.72(H) x 3.27(D) inch - Dimension Including Speaker Stand : 170(W) x 729(H) x 194(D) mm 6.69(W) x 28.7(H) x 7.64(D) inch - Audio Amplifier : 10W + 10W - Impedance : 8 - Weight : 6.4kg(14.11 Lbs) Table Top Stand DTS-42ST - Dimension : 667(W) x 212(H) x 320(D) mm 26.26(W) x 8.35(H) x 12.6(D) inch - Weight : 7kg(15.43 Lbs) Wall Mounting Unit DSP/DP-HG10, DSP/DP-HG20, DSP/DP-HG22 - Variable Angles : 0 , 10 , 15 , 20 o o o o - Dimension : 601(W) x 592(H) x 35(D) mm 23.66(W) x 23.31(H) x 1.9(D) inch - Weight : 4.5kg(10 Lbs) 11 CONTENTS PREPARATION 6· 10 · 14 · 15 · 16 · Safety Precautions Checking Accessories Panel Controls Remote control Remote Control Setup CONNECTION 17 · 20 · 22 · 28 · 30 · 32 · 34 · 36 · 38 · 40 · 42 · Antenna Connection To Watch TV Channel Setup Watching Digital Broadcasts Watching Cable Broadcasts Watching Satellite Broadcasts Watching a DVD Image Watching a VCR Image Watching a Camcorder/Game Console Image Connecting PC(15Pin D-Sub) Connecting PC(DVI) APPLICATION 45 · 46 · 48 · 50 · 52 · 54 · 55 · 56 · 58 · 60 · Selecting Picture Mode Customizing Picture Adjusting Screen Size Adjusting Screen Size(PC, DVI) Enlarging Screen Size Watching a Still Image Adjusting Auto Sound Mode Customizing Sound Mode Selecting INPUT SIGNAL Checking the Current Input Signal 61 · MENU Background, Languages and Keypad Lock Settings 63 · MGDI (Meta Genuine Digital Image) 65 · Closed Caption Setting 67 · Time Setting 69 · Image Sticking Minimization(ISM) 71 · Parental Lock Setting 75 · Initialize Setting 77 · Setting Sleep Timer MISC. 78 · Before Requesting Service 79 · SPECIFICATIONS 13 Panel Controls Front Panel, Back Panel, Remote Control * Items having same names on Plasma television and the remote control would function in exactly the same way. Front ON/OFF STAND BY/OPERATE · Power control sensor · Power Standby: Red - Standby Green - ON · Power button Select when adjusting volume or select/adjust "MENU." Press when moving "MENU" or "Channel" Rear Position of Ferrite Core Right Speaker Left Speaker DVI-D INPUT ANT DVI-D INPUT PC INPUT(15 pin D-sub) COMPONENT A/V jacks (DTV/DVD INPUT jacks) S-VIDEO, TV out A/V INPUT, Cable Receiver INPUT jacks ANT Used when manufacturing(For manufacturer use only) External Speaker Power 14 Remote Control ) indicates the page in which * The number in ( the function of each button is explained in detail. Note · Use two "AAA" batteries. · Be sure to use replacement batteries of the same type as the original ones. · The life of a battery depends on how much it has been used. POWER TV/VIDEO(DVD)/SAT/CATV TV Power button 20 VIDEO/ DVD SAT CATV 21 Channel number (0~9) Use to select channel directly 0~9 60 Display button Indicates the current state and resolution. DISPLAY Pressing the Power button of the TV allows the Display to be standby. (Red light is shown in the Remote Control Sensor.) At this time, if you press the Power button of the Remote Control, the Display is turned ON (Green light in the Sensor). 58 TV/VIDEO Use this function to make video input selection. It changes in the following sequence TV -> Video1 -> Video2 -> TV 100 MULTIMEDIA CH TV/VIDEO Use it when selecting a channel number of over 100 ZO O M - ZO Multimedia V O L 58 M O + 52 ZOOM button Used to zoom the screen. To enlarge, press the(+) button, and to return to the previous condition, press the(-) button.(Zoom Mode : Zoom 0~20) V O L MENU V CH CH E RE SC Use this function to make video input selection. It changes in the following sequence PC -> DVI -> Component 1-> Component 2 -> PC CH button / Adjusts the channel. N SI ZE E PR 22 Menu button Used to display a desired menu. MUTE F.R/SLOW Volume button CAPTION F.F/SLOW PAUSE / Adjusts the volume. 48 PLAY Screen Size button Previous Channel button It returns to previous channel. REC STOP PREV OPEN/CLOSE NEXT PICTURE SOUND MODE MODE Adjusts the size of the screen (Normal, 16:9, etc.) 20 Mute button Mute sound. STILL Caption button 65 This feature allows you to choose the caption. 45 Picture Mode button Every press of the button cycles through the four different. Normal -> Dynamic -> Cinema -> User. MTS ADD/ ERASE SLEEP VIDEO/DVD Function Still button 54 Used to view a still picture during watching moving images.(Sound can be heard.) 57 MTS button This feature allows you to select the language and stereo sound while broadcasting Sound Mode button 55 Every press of the button cycles through the five different modes: Normal -> Movie -> Music -> News -> User. Sleep Timer button 77 Each time you press this button, a different input mode appears. The sequence is as follows: 15Min. -> 30Min. -> 60Min. -> 90Min. -> 120Min. -> OFF After the time is selected, it automatically becomes standby state. 24 CHANNEL ADD/ERASE The feature either memorizes the current channel or erases a channel that has previously memorized. When Using Remote Control: Installing the Batteries in your Remote Control: · Be sure not to allow the Remote Control to drop or to become wet. · Keep it away from hot or moist locations. · Push to open the cover of the remote controller · Set the batteries in the battery cell after checking the electrode, and then shut the cover. 15 Remote Control Setup Remote control supporting the multi brand devices. - The remote control provided is designed to operate the Daewoo PDP set. - However, using the remote control, you can control the Cable Converter, VCR , DVD and Satellite Broadcasting Receiver of other brands after setting up the remote control. Notices: - All the preset codes are erased when replacing the battery. In this case, you must set the remote control again. - S ome of the products may not be applied because of different signal system. - This is only for the basic control of the devices. HOW TO SET UP THE REMOTE CONTROL FOR US ING OTHER DEVICES . · Turn on the Device. (Cable Converter, VCR , DVD or Satellite Broadcasting Receiver) · P ress the device selection button of remote control until it is flickering. It takes about 3 seconds. · P ress the assigned three digits code of the device using number key button of the remote Control toward the IR receiver of the device. The code number is provided below. Whenever pressing the number, the device selection button will be flicked once. · If the code is set properly, the device will turn off automatically. If not, repeat the process 3. · As the device is turned off, press the flickering device selection button of the remote control once. Then the lamp of the button will be turned off. · Now, the setting-up of the device can be controlled by Daewoo PDP remote control. Remote Control Setup Code VCR (STANDARD : 004) Maker (Brand) Name DAEWOO Code Number (3 digit) List 004 094 104 018 059 019 063 070 224 037 038 095 109 037 003 062 012 014 017 068 069 096 097 098 102 103 037 064 026 065 074 225 039 045 098 231 058 016 080 039 111 049 131 078 048 130 050 223 086 052 054 132 206 053 055 114 125 SAT (STANDARD : 004) Maker (Brand) Name DAEWOO PANASONIC PHILIPS SAMSUNG Code Number (3 digit) List 004 066 075 122 142 JVC MITSUBISHI PANASONIC PHILIPS SAMSUNG For more device codes, contact Daewoo service center. 058 075 087 088 090 091 093 099 101 105 106 129 221 228 037 056 060 061 081 082 129 214 SHARP SONY DVD DAEWOO LG PANASONIC PHILIPS SAMSUNG 352 360 350 368 369 357 370 355 351 363 364 16 Antenna Connection Indoor Antenna Connection 1. Connect the feeder cable of the antenna to the combining adapter. WHEN THE IMAGE IS NOT CLEAR Unclear screen image and bad reception may be a cause of wrong antenna connection. Be sure to check its direction and place when installing. 2. Connect the combining adapter to the antenna input at the back of the TV set. WHEN USING THE COMBINING ADAPTER You may obtain the combining adapter at your closest Service Center. Antenna Input 17 CTV Antenna Connection TV Antenna installation may be found in most. When a coaxial cable is used Plug the coaxial cable to the antenna socket, and fix it firmly. It is recommended to use the provided coaxial cable. ANT/CABLE 1 Provided coaxial cable When a feeder cable is used ANT/CABLE 1 18 Outdoor Antenna Connection Outdoor Antenna connection-such as VHF or/and UHF-may be necessary for installation at private houses Single Antenna Connection. VHF Antenna UHF Antenna ANT/CABLE 1 Separate Antenna Connection. ANT/CABLE 1 19 To Watch TV To Watch TV - The buttons on the keypad in the PDP unit, which have the same name as those on the remote controller, perform the same function as the remote controller. Press the "ON/OFF" button of the PDP unit. ·Power button of the remote control and the keypad on the PDP unit would be operated only when the "AC Power" of the PDP unit is supplied. Otherwise, neither the remote controller nor keypad of the PDP unit can turn on the PDP. TV VIDEO/ DVD POWER SAT CATV When pressing a Channel button ·Select two digits if using the number button for Channel selection. For example, to watch Channel No.9, press the Nnmber buttons 0 and 9. If pressing only number 9, it takes more time than pressing two digits for selecting a channel. DISPLAY TV/VIDEO MULTIMEDIA CH ZO O M - ZO M O + V O L E PR MENU V O L 1. Press the "MUTE" button. 2. No sound is heard if "MUTE" is displayed on the screen. 3. Sound is heard again if pressing the "MUTE" button once again. For example, you can use this button when telephone rings or when guest comes while watching TV. V CH CH E RE SC MUTE F.R/SLOW PLAY CAPTION F.F/SLOW REC STOP PAUSE PREV OPEN/CLOSE NEXT PICTURE SOUND MODE MODE STILL Check of TV operation status · If pressing the "DISPLAY" button, the status of the Channel or broadcasting being currently watched or entry status of video component is displayed on the screen. MTS ADD/ ERASE SLEEP Auto Power Off · If TV broadcast for the day is finished, the TV will automatically turn off after about 30 minutes. However, if the Off-time or Sleep time is operating, it takes precedence. This Auto Power Off feature only operates in the TV mode. 20 N SI ZE To mute the sound 1 Press the "ON/OFF" button. ON/OFF · Press the "ON/OFF" button of the PDP set. · The main power lamp turns on in red color. · Press the "POWER" button of the remote control or any button in the keypad of the main body. · The LED of the PDP set turns on in "green" color and the set turns on. POWER 2 V O L Select Channel. CH ZO O M - ZO M O MENU V O L · Select the desired channel by pressing the " CH " button or the number button. Ex) Channel 09 CH 09 MONO PM 12 : 00 V CH CH E RE SC ZO O 3 Adjust volume. CH M - ZO M O V O L E PR MENU V O L ·Sound reduces if pressing the " VOL" button. · Sound increases if pressing the "VOL " button. V CH CH E RE SC N SI ZE N SI ZE + No Ratings E PR + Vo l u m e 10 4 Press the "POWER" button to turn off the PDP set. POWER · TV turns off and he LED of the PDP set changes to red color. 21 Channel Setup Automatic Channel Memory - This is the function for the TV to memorize the broadcasting channels. If the Auto Setup is done, you can simply find out channels with " CH " buttons and so need not to select channels by pressing each channel number. PO W TV VID E DVDO/ ER SAT CAT V DIS TV/V PLA Y IDE O MU LTIM OM ZO V O L ME PRE CH EDIA + OM ZO NU V O L MU TE F.R /SL OW REC VC H CH E SIZ EN SCRE PLA Y P STO CAP F.F/S TION LOW PAU S E ZO O 1 V O L Press the "Menu" button. CH PRE PIC