User manual DAEWOO DV6T811N

DVD-Video(USA)_DV6T811N-LT 02.4.16 4:40 PM `A DVD-VIDEO PLAYER Owner's Manual DV6T811N [Hi-Fi] x In the initial settings, exclusive channel for DVD/Video is set to CH 3. Set the TV channel to CH3 before using it. x Region code of DVD/Video player for home is 1 or ALL. In inserting a disc with other region code, it does not operate. Please only use a disc with region code 1 or ALL. x is a `Prohibition' mark. If this mark is displayed in operating the product, please wait for a while, then use it. If " Prohibition" mark continues to be displayed in pressing a button after that, it means the button does not function in the currently played disc. x Press a product button on the REMOTE then use the product. · DVD operation : [DVD] button · Video operation : [VCR] button DVD-Video(USA)_DV6T811N-LT 02.4.16 2:37 PM `1 Product Information Important Safeguards CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance. WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. IMPORTANT FOR LASER PRODUCTS · LASER : This Digital Video Disc Player employs a Laser System. To ensure proper use of this product please read this owner's manual carefully and retain for future reference. Should the unit require maintenance, contact an authorized service location - see service procedure. Use of control adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure. To prevent direct exposure to the laser beam, do not try to open the enclosure. Visible laser radiation when open and interlocks defeated. DO NOT STARE INTO THE BEAM. · DANGER : Visible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. CLASS 1 · CAUTION : Do not open the top cover. There are no user serviceable parts LASER PRODUCT inside the Unit; leave all servicing to qualified service personnel. FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rule. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception; which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experience radio/TV technical for help. CAUTION: Any changes or modification in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 1 DVD-Video(USA)_DV6T811N-LT 02.4.16 2:37 PM `2 This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that can be repaired by the user. 1 READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2 RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3 HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4 FOLLOW INSTRUCTIONS All operating and use instructions should be followed. 5 CLEANING Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 6 ATTACHMENTS Do not use attachments unless recommended by the unit's manufacturer as they may cause hazards. 7 WATER AND MOISTURE Do not use this unit near water- for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool and the like. Caution : Maintain electrical safety. Powerline operated equipment or accessories connected to this unit should bear the UL listing mark or CSA certification mark on the accessory itself and should not be modified so as to defeat the safety features. This will help avoid any potential hazard from electrical shock or fire. If in doubt, contact qualified service personnel. 8 ACCESSORIES Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The PORTABLE CART WARNING unit may fall, causing serious injury to a child or adult as well as serious (symbol provided by RETAC) damage to the unit. Use this unit only with a cart, stand , tripod, bracket, or table recommended by the manufacturer. 8A A unit and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the unit and cart combination to overturn. 9 VENTILATION Slots and openings in the case are provided for ventilation to ensure reliable operation of the unit and to protect it from overheating. These openings must not be blocked or covered. These openings must not be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat radiator. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 10 POWER SOURCES This unit should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power company. For units intended to operate from battery power, or other sources, refer to the operating instructions. 2 DVD-Video(USA)_DV6T811N-LT 02.4.16 2:37 PM `3 Product Information 11 GROUNDING OR POLARIZATION This unit is equipped with a polarized alternating -current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your obsolete outlet.To prevent electric shock, do not use this polarized plug with an extension cord, receptacle, or other outlet unless the blades can be fully inserted without blade exposure. If you need an extension cord, use a polarized cord. 12 POWER-CORD PROTECTION Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit. Note to CATV system installer This reminder is provided to call the CATV system installer's attention to Section 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. 13 Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70-1984 (Section 54 of Canadian Electrical Code, Part 1) provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See example as shown. 14 Power Lines An outside antenna system should not be located in the vicinity of overhead power lines, other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching or approaching such power lines or circuits as contact with them might be fatal. Installing an outdoor antenna can be hazardous and should be left to a professional antenna installer. 15 LIGHTNING For added protection for this unit during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. 16 DISC TRAY Keep your fingers well clear of the disc as it is closing. It may cause serious personal injury. 17 OVERLOADING Do not overload wall outlets of extension cords as this can result in a risk of fire or electric shock. 18 OBJECT AND LIQUID ENTRY Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or "short-out" parts that could result in a fire or electric shock. Never spill liquid of any kind on the unit. 19 BURDEN Do not place a heavy object on or step on the product. The object may fall, causing serious personal injury and serious damage to the product. 20 DISC Do not use a cracked, deformed or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction. EXAMPLE OF ANTENNA GROUNDING ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS NEC - NATIONAL ELECTRICAL CODE POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250 PART H) 3 DVD-Video(USA)_DV6T811N-LT 02.4.16 2:37 PM `4 21 SERVICING Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 22 DAMAGE REQUIRING SERVICE Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions. A. When the power-supply cord or plug is damaged. B. If liquid has been spilled, or objects have fallen into the unit. C. If the unit has been exposed to rain or water. D. If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to its normal operation. E. If the unit has been dropped or the cabinet has been damaged. F. When the unit exhibits a distinct change in performance-this indicates a need for service. 23 REPLACEMENT PARTS When replacement parts are required, have the service technician verify that the replacements he uses have the same safety characteristics as the original parts. Use of replacements specified by the unit manufacturer can prevent fire, electric shock, or other hazards. 24 SAFETY CHECK Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks recommended by the manufacturer to determine that the unit is in safe operating condition. 25 WALL OR CEILING MOUNTING The product should be mounted to a wall or ceiling only as recommended by the manufacturer. 26 HEAT The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. 4 DVD-Video(USA)_DV6T811N-LT 02.4.16 2:37 PM `5 Product Information Advantages of This Product Are ..... · DVD, VCD, CD, CD-R(MP3), CD-RW, VHS, S-VHS playback function · DVD one-touch record function · Watching DVD for recording broadcast · Integrated REMOTE (VCR, DVD) · Ultra power savings : less than 3W for stand-by mode · VISS function · Multiplex sound playback/record · High Sound Quality of 6 head Hi-Fi · One Touch timer Recording (OTR) · MP3 file playback function (CD-R disc having records of MP3 files) · Various video type-supported (AUTO, NTSC and PAL) · GUI (Graphical User Interface) OSD (On Screen Display) By using the [DISPLAY] button on the remote control, information on the DVD/VCD/CD player and disc, can be displayed on the TV screen. · Screensaver function (DVD) · 3D sound (3D sound effect using 2 speakers) · High bit / high sampling with 27MHz / 10bit video encoder This unit has 27MHz / 10bit capability, that enables the faithful reproduction of fine images. · High bit / high sampling with 96KHz / 24bit audio D/A converter With this 96KHz / 24bit linear Pulse Code Modulated signals, which constitute the highest specifications in the DVD standards, you can enjoy faithfully reproduced sound in all of its various modes. To support 96KHz sampling / 24bit sound, the shaping noise of this multi-level digital sigma type of D/A converter is kept flat up to 44KHz, thus preventing the important audio signals from being affected. · Coaxial, Optical digital output (PCM, Dolby Digital, dts) You can enjoy high-level digital audio by connecting with amp embedded with Dolby Digital / dts decoder. · Built-in Dolby Digital decoder (DVD) · Analog audio 2-channels output for DOWNMIX (x1) · Composite video out (x1) · S-Video out (x1) 5 DVD-Video(USA)_DV6T811N-LT 02.4.16 2:37 PM `6 · Slow Forward / reverse (DVD) playback · Fast Forward / reverse playback · Search of title, chapter, and time in DVD disc, and search of track and time in VCD and CD · Various TV aspect (DVD) 4:3 for Pan and Scan, 4:3 for Letter Box, and 16:9 for Wide · Repeat playback (title and chapter for DVD, track and disc for VCD/CD) · Bookmark function (DVD) Playback position can be made to remember up to 3 positions for speedy search. · Selective Play (DVD/VCD/CD) You can select and play the desired title / chapter of DVD and track of Video CD/CD in STOP mode. · 3 languages OSD (On Screen Display) function (DVD) You can select and display OSD in 3 languages. (English, French, Spanish) · Parental Lock function (DVD) This function can prevent playback of software that may be unsuitable for children. · Multi Audio function (DVD) The audio soundtrack can be heard in up to 8 languages. In the case of SVCD or CVD, it depends on the disc. (The number of audio languages depends on the software.) · Multi Subtitle function (DVD) The subtitle can be seen in up to 32 languages. In the case of SVCD or CVD, it depends on the disc. (The number of subtitle languages depends on the software.) · Multi Angle function (DVD) This function allows you to choose the viewing angle of scenes which were shot from a number of different angles. (The number of angles depends on the software.) · Screen zoom function (DVD/VCD) · Thumbnail view function (in VCD with inactivated PBC) 6 DVD-Video(USA)_DV6T811N-LT 02.4.16 2:37 PM `7 Product Information Read Carefully before Using Cautions in use of DVD-Video player are described below. Please read carefully before using a DVD-Video player. Installation place and handling · When you place this player near other devices, they may affect poorly together. · When you place DVD-Video player and TV in the upper and lower sides, it may cause flickering of pictures or failure (tape is not ejected). · When you place this player near strong magnetic materials, it may affect image or voice poorly or damage recording. · Do not spill volatile liquids like insect spray over the player. Do not leave rubber or plastic products in contact with the player for a long time. They will cause deterioration or paint peel-off. Not in use · When the unit is not in use, be sure to remove the disc or tape and turn off the power. · If you do not use the unit for a long period, remove batteries in REMOTE to prevent leakage. · In case you don't use the unit for a long time, the unit may not function properly in the future. Turn on and use the player occasionally. Moving · Repack the unit as it was originally packed at the factory. Alternatively, pack this product with towel not to be damaged. · Eject any videotape. Cleaning · Dust off dirt in cabinet or control panel part smoothly with a soft cloth. · For heavy dirt, soak the cloth in a weak detergent solution, wring it well and wipe. Use a dry cloth to wipe it out. · Follow instructions in using chemical cleaners. · Do not use any type of solvent such as gasoline or benzene, as they may cause deterioration or paint peel-off. Checking · Video is a high precision device. To obtain a clear screen, we recommend regular inspection and maintenance every 1,000 hours of use by technical engineers. · For checking, contact your dealer or your nearest service center. Checking and Replacement of Antenna · Antenna is subject to change in its direction or damage by wind and rain. For clean screen, contact and consult your nearest service center about checking and replacement. 7 DVD-Video(USA)_DV6T811N-LT 02.4.16 2:37 PM `8 In recording important screen · Be sure to record the screen and check whether recording is performed properly. We beg you to understand compensation of recording if recording is not performed by badness of used tape or video. Copyright · Do not use your recordings without permission of a copyrighter except personal usage. Tape and Disc Handling · Do not use any tape and disc below. Damage of video head or cut/coiling of tape may cause failure. - Tape with mold - Tape or disc stained with juice or attachments - Tape having breakage connection - Disassembled tape - Disc with severe scratch · Moisture condensation may occur in tape. Moisture condensation damages the tape. Please use the tape after the moisture condensation is disappeared. · After use, store tape vertically in a case to prevent loose. · Do not store the following places. - High temperature and humidity - Subject generation of mold - Subject to direct sunlight - Much dirt or dust - Near strong magnetic materials such as speaker 8 DVD-Video(USA)_DV6T811N-LT 02.4.16 2:37 PM `9 Product Information Contents Product Information Important Safeguards .................................................................................................................. 1 Advantages of This Product Are .... ........................................................................................... 5 Read Carefully before Using ...................................................................................................... 7 Contents ....................................................................................................................................... 9 Identification of Controls .......................................................................................................... 11 Remote Control ........................................................................................................................ 14 Installation Connecting with TV.................................................................................................................. 16 Connecting with Cable Box ....................................................................................................18 Connecting with Other VCR or Camcorder .......................................................................... 20 Connecting with Audio ............................................................................................................ 22 Connecting TV with S-Video/Component Jack, Amp with Digital Audio Out Jack .......................................................................................... 23 Basic Operation Clock Set .................................................................................................................................. 24 Output Select ............................................................................................................................ 25 DVD Playback .......................................................................................................................... 26 VCR Playback .......................................................................................................................... 27 Recording .................................................................................................................................. 29 VCR Operation Memorizing TV Channels ...................................................................................................... 32 Timer Recordings .................................................................................................................... 36 Watching and Recording Cable TV ........................................................................................ 40 Using advanced features .......................................................................................................... 41 Indexing VISS Signals / Searching VISS Signals....................................................................... 43 Counter 0 Stop........................................................................................................................... 44 Displaying Clock/Counter ........................................................................................................ 45 Changing the on-screen menu language ............................................................................... 46 Hi-Fi Stereo Playback ............................................................................................................... 47 Recording Stereo or Secondary Audio Programs (SAP) ........................................................ 47 9 DVD-Video(USA)_DV6T811N-LT 02.4.16 2:37 PM ` 10 DVD Operation Skipping from a current scene to a desired scene................................................................... 48 Confirming the current PLAY mode on screen ...................................................................... 55 Selecting an AUDIO language, SUBTITLE language and 3D AUDIO ................................ 56 Selecting ZOOM and Multi Angle .......................................................................................... 57 Memorizing a scene ................................................................................................................. 58 Displaying menus in a disc. ..................................................................................................... 59 Setup Basic SETUP Mode ................................................................................................................... 60 LANGUAGE Setup.................................................................................................................... 61 VIDEO Setup ............................................................................................................................. 62 AUDIO Setup........................................................................................................................... 63 Others Setup ............................................................................................................................. 65 The others About DVD................................................................................................................................ 67 Basic information about VCR and Videotape........................................................................ 70 Before doubting about troubles (DVD) ................................................................................... 72 Before doubting about troubles (VCR)..................................................................................... 74 Specifications ............................................................................................................................ 78 Region Code ............................................................................................................................ 79 10 DVD-Video(USA)_DV6T811N-LT 02.4.16 4:40 PM ` 11 Product Information Identification of Controls Main body (front panel) ! @ # $ % ^ &* ( ) 12 3 4567 8 ! POWER (STANDBY/ON) button Use to power the device on/off if AC power supply is connected. 3 SELECT button Use to change DVD mode to VCR mode, and vice versa. @ Place to insert videotape # COPY button Use to copy contents of disc into a videotape. 4 STOP button Use to stop playing . 5 REWIND button Use to rewind currently being played videotape or disc; or to playback back rapidly. $ % ^ & * ( ) Disc tray VIDEO INPUT jack AUDIO INPUT jack EJECT button RECORD button CHANNEL Up/Down button Operation Display Window Display operation of device. For more information, see "Operation Display Window" in the next page. 6 Playback/PAUSE button Playback videotape or disc. Press this button to pause a screen. 7 FAST FORWARD button Use to wind currently being played videotape or disc; or to playback rapidly. 8 OPEN/CLOSE Tray button 1 DVD operation display lamp 2 VCR operation display lamp 11 DVD-Video(USA)_DV6T811N-LT 02.4.16 2:37 PM ` 12 Operation Display Window ! @ $& ) 135 7 # ^( %* 2 46 ! VCR Operation @ REC and TIMER REC display : Recording , : TIMER Recording , : To be Timer-recorded, : To be Timer-recorded state ERROR (No Tape or Tape without tab) ) Time, Counter and Current Operation : Tray is opened : Tray is closed : Disc is loaded : There is no disc in tray : Disc has some error : Menu screen is displayed : Setup menu is displayed : Power is ON : Power is OFF # Copying Use to copy contents of disc into videotape. $ % ^ & Hi-Fi Videotape AM/PM Recording Speed Parental (Lock) When parental limit in "SETUP" menu is set except "8 UNLOCK" and you set a password, it goes into LOCK status ( ) and this indicator is lighted up. This indicator disappears iif you doesn't set a password. 1 2 3 4 5 Dolby Digital Indicator dts Disc Indicator 3D Sound Indicator MP3 Disc Indicator Disc Type Indicator Currently loaded disc type (SVCD, VCD, DVD etc.) is displayed. * Title This is displayed in VCD and CD disc. 6 Repeat Playback It indicates repeat playback is on now. ONE, ALL, and A-B mean repeat playback between a chapter or track; title or whole contents of disc; and two specific points respectively. ( Chapter This is displayed in DVD disc. 7 DVD Disc Operation 12 DVD-Video(USA)_DV6T811N-LT 02.4.16 2:37 PM ` 13 Product Information Main body (Rear Panel) ! $% ^ * ANT.IN AUDIO OUT R DIGITAL AUDIO OUT S-VIDEO OUT L R L OUT AUDIO VIDEO IN COMPONENT OUT RF OUT @ # & ( ! POWER CORD It is a jack for supplying power to the unit. Connect to outlet in a wall. $ COMPONENT OUT Jack To obtain better screen quality, connect the unit to TV or monitor with COMPONENT(480i) input. @ DIGITAL OUTPUT (COAXIAL, OPTICAL) Jack To enjoy sound quality of theater level in home, connect this jack with amp or unit embedded with digital audio decoder. # S-VIDEO OUT Jack To obtain better screen quality, connect and use the unit to TV or monitor inputted from S-VIDEO. % ^ & * ( AUDIO OUT Jack A/V INPUT Jack A/V OUTPUT Jack Connection to ANTENNA Cable Connection to TV 13 DVD-Video(USA)_DV6T811N-LT 02.4.16 2:38 PM ` 14 Remote Control ! [DVD] MENU button @ POWER button # [DVD] TITLE /PBC button $ [DVD] OPEN/CLOSE button, [VCR] EJECT button % [DVD, VCR] MOVE/SELECT in OSD, [VCR] Channel Up/Down button ^ RETURN button & [DVD] REPEAT Playback button * [DVD] ZOOM button ( [DVD] PREVIOUS button (move into a previous chapter or track) ) REVERSE SEARCH button 1 [VCR] PROGRAM button 2 [DVD, VCR] CLOCK/COUNTER button 3 [DVD] ANGLE, [VCR] Record SPEED button 4 [VCR] Record button 5 [DVD, VCR] NUMBER button , [VCR] S-VHS Playback button, [VCR] TRACKING -/+ button 6 DVD SELECT button 7 VCR SELECT button 8 [DVD, VCR] OSD DISPLAY button 9 OUTPUT Selection button 0 SETUP/ENTER button " CLEAR/3D button ` [DVD] SUBTITLE Select button + [DVD] AUDIO LANGUAGE Select, [VCR] AUDIO Select button = [DVD] NEXT button (Move into a next chapter or track) , [VCR] Frame Advance button in pause mode Q PLAY/PAUSE button q FORWARD SEARCH button W STOP button w [DVD] Chapter/Title/Time SEARCH button E [DVD] BOOKMARK button e [DVD, VCR] TV/VCR button R [VCR] Number 100, [DVD] SYSTEM button (Select Auto/NTSC/PAL) ! DVD 6 VCR @ # $ % ^ & * ( ) 1 2 3 4 MENU TITLE/PBC OPEN/CLOSE CH DISPLAY OUTPUT 7 8 9 0 SETUP RE ENTER TU RN ZOOM CH AUDIO CL EA R /3D " ` + = Q q W w E e REPEAT SUBTITLE PREV. PLAY/PAUSE NEXT PROGRAM CLK/CNT MARK SEARCH REC SPEED/ANGLE TV/VCR TRACKING 100/SYSTEM 5 R /S-VHS Child Lock!!! Press the power [ ] button of the remote for about 8 seconds. No buttons of front panel and remote can be operated now and Lock indicator (" ") will be displayed on window display. To release child lock, press the power [ ] button of the remote control for about 8 seconds. 14 DV6T811N-LT(GB) 02.4.16 5:10 PM ` 15 Product Information Instructions in Using REMOTE · Operate REMOTE within 7m from the unit. · Do not press 2(two) buttons at the same time. · Do not light up sending part of REMOTE. · Do not keep in the place with much dust and humidity. DVD MENU CH VCR OPEN/CLOSE TITLE/PBC DISPLAY OUTPUT SETUP ENTER RE DVD MENU CH TU RN ZOOM CH AUDIO CL EA R/3 D VCR REPEAT PREV. SUBTITLE OPEN/CLOSE TITLE/PBC DISPLAY OUTPUT PLAY/PAUSE NEXT SETUP ENTER PROGRAM CLK/CNT REC MARK SEARCH RE TU RN ZOOM CH AUDIO CL EA R/3 D REPEAT PREV. SUBTITLE SPEED/ANGLE TV/VCR TRACKING PLAY/PAUSE NEXT 100/SYSTEM PROGRAM CLK/CNT REC VCR SEARCH MARK /S-VHS DVD MENU CH SPEED/ANGLE TV/VCR TRACKING OPEN/CLOSE TITLE/PBC DISPLAY OUTPUT SETUP ENTER 100/SYSTEM AR/ 3D RET URN ZOOM CLE CH AUDIO /S-VHS REPEAT PREV. SUBTITLE PLAY/PAUSE NEXT PROGRAM CLK/CNT REC MARK SEARCH SPEED/ANGLE TV/VCR TRACKING 100/SYSTEM /S-VHS Accessories REMOTE OP EN /CL OS E TIT LE/PB C CH SETU P ENTE R CH ME DV NU DIS PLAY OU TPUT D VC R 2 Batteries RF cable Connecting cable to Audio/Video jack Owner's Manual/ Warranty RETUR N PEAT ZO OM RE PR EV. PLAY /PA US E AU DIO CLEAR/3D SU BTITL E PR NE OG XT RA M CLK/C NT RE C SPE ED/AN MA R TRAC GLE RK SEAR KIN TV/VC CH G 100/S /S-VH S YSTE M · To purchase accessories or not supplied parts additionally, contact your nearest dealer or service center. But, owner's manual and warranty are not sold additionally. 15 DVD-Video(USA)_DV6T811N-LT 02.4.16 2:38 PM ` 16 Connecting with TV s In the initial SET, exclusive channel for video is set to CH 3. To change this setting, set again in "CHANNEL SET" screen in VCR operation. s In connecting RF cable to TV, set TV channel to CH3. How to Connect with RF cable REAR PANEL OF DVD-VIDEO REAR PANEL OF TV INPUT 1 INPUT 2 OUTSIDE ANTENNA OR WALL ANTENNA OUTLET ANT IN ¡ TM RF CABLE Remove circular cable (RF cable) (surplus cable) plugged in "ANT.IN" Jack in rear panel of TV. Connect the cable to "ANT.IN" jack in rear panel of DVD-Video. Connect TV to DVD-Video. Connect "RF OUT" jack in DVD-Video with "ANT.IN" jack in TV with RF cable. 16 DVD-Video(USA)_DV6T811N-LT 02.4.16 2:38 PM ` 17 How to Connect with Audio/Video jack Installation REAR PANEL OF DVD-VIDEO REAR PANEL OF TV INPUT 1 INPUT 2 OUTSIDE ANTENNA OR WALL ANTENNA OUTLET ANT IN RF CABLE AUDIO/VIDEO CABLE £ (If there is AUDIO/VIDEO INPUT jack in TV) Connect VIDEO OUT jack in DVD-Video to VIDEO IN jack in TV, and AUDIO OUT jack in DVD-Video to AUDIO IN jack in TV with connecting cable of Audio/Video jack. Select VCR mode by pressing TV/INPUT button in TV, you can view more clear screen and sound than connection with RF cable only. CHECK UP! · VHF: 2 ~13 channels of TV · UHF: 14~69 channels of TV · CATV: Broadcasting is transmitted with cable from broadcasting station by contract with the station and consumers. It does not need any antenna. · In/Out jack in Audio/Video terminal: - In: A jack used to receive signal required in this unit from other units. - Out: A jack used to send signal of this unit to other units. · Connect with Audio/Video terminal, you can enjoy more clear video and audio. (Use OUTPUT button in this REMOTE to select video mode.) 17 DVD-Video(USA)_DV6T811N-LT 02.4.16 2:38 PM ` 18 Connecting with Cable Box s You should install a distributor additionally. How to connect CONVERTER BOX REAR PANEL OF DVD-VIDEO REAR PANEL OF TV INPUT 1 INPUT 2 IN OUT ANT IN RF CABLE RF CABLE AUDIO/VIDEO CABLE A/B Switch SPLITTER (NOT SUPPORTED) RF CABLE OUT IN OUT RF CABLE CABLE ANTENNA If your cable system only requires you to use a converter box for some channels (i.e., pay-TV channels), follow these steps: Find the primary incoming RF cable. Plug this cable into a splitter (available at your local electronics store.) Connect one RF cable between one OUT terminal on the splitter and the IN terminal on the converter box. Connect another RF cable between the other OUT terminal on the splitter and the A-IN terminal on an A/B switch (available at your local electronics store.) Connect a third RF cable between the OUT terminal on the converter box and the B-IN terminal on the A/B switch. Connect a RF cable between the OUT terminal on the A/B switch and the ANT. IN on your DVD-VIDEO. When the A/B switch is in the B position, use the converter box to change channels ; when the A/B switch is in the A position, use the DVD-VIDEO to change channels. 18 DVD-Video(USA)_DV6T811N-LT 02.4.16 2:38 PM ` 19 How to watch general broadcasting with recording CATV ¡ TM £ ¢ Set Channel Select switch of Converter Box to CH 3 or 4 as same as video exclusive channel. Press [SET] button in [VCR] operation to set video exclusive channel in "CHANNEL SET" screen. Press channel button of Converter Box to select channel to be recorded. In this case, if you want to watch CATV to be recorded, press [TV/INPUT] button of TV to select "Out(VCR)". Press [REC] button in DVD-Video. To watch general broadcasting, press channel button in TV to select the desired channel. Installation CHECK UP! · For some types of TV, you should press [TV/INPUT] button in TV REMOTE and convert from Out 1( VCR 1) or Out 2(VCR 2) mode to Broadcasting Channel mode to change TV channel. · Change channel selection of CATV receiver in recording, contents of recording is changed. 19 DV6T811N-LT(GB) 02.4.16 5:13 PM ` 20 Connecting with Other VCR or Camcorder How to Connect with Jack in Front Panel REAR PANEL OF PLAYBACK VCR(CAMCORDER) FRONT PANEL OF DVD-VIDEO VIDEO OUT (L) AUDIO (R) REAR PANEL OF DVD-VIDEO REAR PANEL OF TV INPUT 1 INPUT 2 ANT IN RF CABLE AUDIO/VIDEO CABLE How to Connect with Jack in Rear Panel REAR PANEL OF PLAYBACK VCR(CAMCORDER) REAR PANEL OF DVD-VIDEO REAR PANEL OF TV INPUT 1 INPUT 2 VIDEO OUT (L) AUDIO (R) ANT IN RF CABLE AUDIO/VIDEO CABLE 20 DVD-Video(USA)_DV6T811N-LT 02.4.16 2:38 PM ` 21 ¡ TM £ Connect AUDIO/VIDEO OUT jack in Camcorder(or playback video) to AUDIO/VIDEO IN jack in rear panel (or front panel) of DVD-Video with connecting cable. Connect "ANT. IN" jack in TV to "RF.OUT" jack in DVD-Video with RF cable. To record contents of camcorder or playback video with DVD-Video, insert recording tape attached recording tab in DVD-Video. Installation How to Copy(Edit) Tape with Other VCR or Camcorder ¡ TM £ ¢ Turn on DVD-Video. Press [OUTPUT] button of remote control and adjust DVD-Video to display "External Input 1" or "External Input 2" in TV screen. Press [PLAY] button in Camcorder or playback video. Press [REC] button in DVD-Video if you want to record contents of camcorder or playback video. Press [Pause] button in DVD-Video when unnecessary or undesired scene is displayed in recording. (Caution) Recording is released automatically after 5 minutes since pressing [PAUSE] button. Press [REC] button if you want to record again. How to Playback Chapter Photographed by Camcorder ¡ TM £ Turn DVD-Video on. Press [OUTPUT] button of remote control and adjust DVD-Video to display "External Input 1" or "External Input 2" in TV screen. Insert tape in camcorder and playback it. 21 DVD-Video(USA)_DV6T811N-LT 02.4.16 2:38 PM ` 22 Connecting with Audio How to Connect with Stereo Unit such as Audio REAR PANEL OF STEREO UNIT REAR PANEL OF DVD-VIDEO (L) AUDIO (R) AUDIO CABLE ¡ TM £ Connect Audio jack. Connect AUDIO OUT in rear panel of DVD-Video to IN jack of stereo sound unit. For Input Select in stereo unit, Select "External Input" connected with DVD-Video. Playback DVD disc or Hi-Fi videotape, you can hear sound in speaker of stereo unit. 22 DVD-Video(USA)_DV6T811N-LT 02.4.16 2:38 PM ` 23 Connecting TV with S-Video/Component Jack, Amp with Digital Audio Out Jack s Use in S-VIDEO or COMPONENT In jack attached in TV or amp supporting Dolby Digital. How to Connect Installation REAR PANEL OF DVD-VIDEO CONNECTING CABLE (NOT SUPPORTED) (L) AUDIO IN (R) COMPONENT IN AMPLIFIER OF DOLBY DIGITAL REAR PANEL OF TV ¡ TM £ Select either S-VIDEO IN or COMPONENT IN to connect to TV. You should select "Video Out" type in DVD SET(see 62P) in advance. Select either COAXIAL or OPTICAL to connect to amp of Dolby Digital. ** If you want to know about "Dolby Digital", please refer to [About DVD] in 68p. If screen is broken in connecting COMPONENT OUT to Pr, Pb, Y of TV COMPONENT IN jack , connect to Cr, Cb, Y.