Detailed instructions for use are in the User's Guide.
Keg Cooler
The model number can be found on the serial plate located on the back panel of the unit. All repair parts available for purchase or special order when you visit your nearest service depot. To request service and/or the location of the service depot nearest you, call the TOLL FREE NUMBER. When requesting service or ordering parts, always provide the following information: · Product Type · Model Number · Part Description
Model · Modèle· Modelo
DKC445BL
For service, contact your nearest service depot or call:
1-800-26- Danby (1-800-263-2629)
to recommend a depot in your area.
Glacière de bière en fût Le numéro du modèle se trouve sur la plaque d'identification située sur le panneau arrière de l'appareil.
En cas de réparation, veuillez contacter votre service après-vente le plus près ou communiquez au:
1-800-26- Danby (1-800-263-2629)
pour connaître le service après-vente le plus proche.
Il est possible d'acheter les pièces de rechange ou de les obtenir par commande spéciale en vous rendant à votre service après-vente le plus proche. Pour effectuer des réparations ou obtenir l'adresse du service après-vente le plus proche, veuillez composer le NUMÉRO SANS FRAIS. Pour effectuer des réparations ou commander des pièces de rechange, veuillez donner les renseignements suivants : · Type de modèle · Numéro du modèle · Description des pièces
Para obtener servicio, comunÃquese con el establecimiento de servicio más cercano o llame al:
Barril refrigerador El número de modelo se encuentra en la placa de serie, ubicada en el tablero posterior de la unidad. Puede comprar todos los repuestos o hacer un pedido especial visitando el establecimiento de servicio más cercano a su domicilio. Llame al TELÉFONO GRATUITO para obtener servicio de mantenimiento o la dirección del establecimiento de servicio más cercano a su domicilio. Siempre, al solicitar servicio de mantenimiento o hacer un pedido de repuestos, debe suministrar la siguiente información: · Tipo de artefacto · Número de modelo · Descripción del repuesto
1-800-26- Danby (1-800-263-2629)
para que le recomendemos un establecimiento de su zona..
Danby Products Limited, Guelph, Ontario Canada N1H 6Z9 Danby Products Inc., Findlay, Ohio USA 45840
Printed in China (P.R.C.)
OWNER'S MANUAL MANUEL D'UTILISATION MANUAL DEL PROPIETARIO
Model · Modèle· Modelo
DKC445BL
CAUTION: Read and follow all safety rules and operating instructions before first use of this product.
PRÉCAUTION: Veuillez lire attentivement les consignes de sécurité et les instructions d'utilisation avant l'utilisation initiale de ce produit.
Keg Cooler
Owners Manual
Glacière de bière en fût
Guide d'utilisation
PRECAUCIÓN: Lea y observe todas las reglas de seguridad y las instrucciones de operación antes de usar este producto por primera vez.
Barril Refrigerador
Manual del propietario
Danby Products Limited, Guelph, Ontario Canada N1H 6Z9 Danby Products Inc., Findlay, Ohio USA 45840
DKC445BL.11.00.
TABLE OF CONTENTS
Before putting appliance into use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 We care for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Tips for energy savings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Disposal of worn out appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Instructions for setting up the Chill `n Tap Keg Cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Chill `n Tap Keg cooler accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 "Warning" CO2 can be dangerous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Chill `n Tap assembly instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 How to replace and empty CO2 cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Setting the refrigerator temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Helpful hints on setting the refrigerator temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Cleaning and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Changing the direction of the door opening (swing) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Helpful hints to assist you in serving the perfect glass of cold beer . . . . . . . . . . . . . . . . . . . . . .10 Keg sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Dispensing beer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Cleaning beer lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Converting the Chill `n Tap Keg Cooler to a basic "All Refrigerator" . . . . . . . . . . . . . . . . . . . . . .12 Optional accessories available for Keg Cooler and/or All Refrigerator . . . . . . . . . . . . . . . . . . . .12 Additional information on CO2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
INTRODUCTION
Thank you for buying a Danby Millennium appliance. This unique appliance is designed to offer you two separate functions. The primary function of this appliance is that of a "Chill'n Tap" Draft Beer Dispensing unit. When this unit is not being used as a Draft Beer Dispensing unit, it's secondary function allows for fast and easy conversion to a compact "All Refrigerator" application. This refrigerator is for domestic use only and is intended for storing fresh foods at temperatures higher than 32ºF / 0ºC Model Number: ___________________________ Serial Number: ______________________________
Date of Purchase: ________________________________________________________________________ Dealer's Name and Address: _______________________________________________________________ This information will be required if your unit requires servicing and/or for general inquiries. To contact a Customer Service Representative, call Danby TOLL FREE. 1-800-26-Danby CAREFULLY READ AND SAVE THESE INSTRUCTIONS These instructions for use are intended for the user. They describe the appliance and correct installation and operating procedures for safe use. IMPORTANT NOTICE: Beer is easily available with Danby's new Keg Cooler Refrigerator, however, it is not intended to be available to people under the legal age to consume beer. One of the options Danby offers is a lock so that access to the ice cold beer can be limited. Danby does not assume liability for the unlawful use or consumption of the beer. DON'T DRINK AND DRIVE! NOTE: This appliance was carefully packed and thoroughly inspected before leaving our factory. Responsibility for its safe delivery was assumed by the carrier upon acceptance of the shipment. Claims for loss or damage sustained during transit must be made directly to the carrier. 1
BEFORE PUTTING APPLIANCE INTO USE
· Before connecting the appliance to any electrical power supply, leave it standing (upright) for about 2 hours. This will reduce the possibility of malfunctions in the cooling system due to transport handling. · Clean the appliance thoroughly, both interior and exterior. (See Cleaning and Maintenance)
WE CARE FOR THE ENVIRONMENT
· Our products use environmentally friendly (recyclable) materials. To this end, individual packaging materials are clearly identified with a recycling symbol. Always use proper disposal methods. · When any appliance finally wears out, always use safe and proper disposal methods. (i.e. use authorized land fill sites only)
TIPS FOR ENERGY SAVINGS
· Try not to open the door too often, especially when the weather is hot and humid. Once you open the door, close it as soon a s possible. · Every now and then check the appliance to make sure it is receiving sufficient ventilation. (adequate air circulation) behind the appliance. · Set the thermostat from higher to lower settings as soon as possible (this will depend on loaded conditions and ambient temperatures etc.,) · Before loading the appliance with fresh foods, make sure they are cooled to ambient room temperature. (excluding soups) · If the door gasket is damaged or the door seal is poor, energy efficiency is lost and energy consumption is substantially higher. To restore energy efficiency, replace the door gasket and/or adjust the door.
IMPORTANT
· This appliance must be connected to a properly "grounded" electrical outlet (see Grounding Instructions) · If food or beverage has a strange smell or color, throw it away, because it is likely that it has spoiled and therefore dangerous to consume. · Always disconnect the appliance from the power supply before cleaning and/or attempting repairs/servicing. WARNING: Repairs should be performed by qualified service personnel only. · Do not defrost this appliance using other electric appliances (i.e. hair dryer) and never attempt to scrape/remove ice/frost from the evaporator (cold plate) with sharp objects. · The rating plate containing Model No/Serial No. and other technical data specific to this unit, is located on the exterior rear wall of the refrigerator cabinet.
DISPOSAL OF WORN OUT APPLIANCES
· When your appliance finally wears out, dispose of it in a safe and harmless manner. If you have bought this appliance to replace an old one equipped with a door lock that cannot be opened from the inside, (lock bolt) make sure the lock is removed, disabled or destroyed before discarding. This will make it impossible for children to accidentally lock themselves inside the appliance and suffocate. · The refrigerator system of this appliance is filled with refrigerant and insulating substances which should be treated and processed separately. Call your nearest service agent or specialized servicing center. If you are unable to locate one, contact your local authorities for proper disposal instructions. Be careful not to damage the any of the refrigeration lines of the appliance.
2
WARNING
Instructions pertaining to the risk of fire, electric shock, or injury to persons. GROUNDING INSTRUCTIONS For your personal safety, this appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a power cord having an equipment grounding conductor and grounding plug. The plug must be plugged into an appropriate wall outlet that is installed and grounded in accordance with all existing local codes and ordinances. Consult a qualified electrician or serviceman if the grounding instructions are not clearly understood, or if doubt exist as to whether your electrical wall outlets are properly grounded.
LOCATION
· Selecting the proper location will ensure peak performance levels of your appliance. Choose a location where the unit will not be exposed to direct sunlight and away from heat emitting sources. · This appliance is designed for "indoor" use only and should not be used "outdoors". · This appliance is inclusive of an in-wall "static" (type) condenser and should not be built-in (recessed) unless adequate ventilation is provided to maintain proper cooling. (minimum 2~3 inches clearance required on all sides) · If the unit (as a Keg Cooler application) is to be built-in, remember this will hamper; 1. Removal of the CO2 cylinder when it needs to be re-filled. 2. Reading/Monitoring/Adjustment of the low pressure CO2 regulator to maintain proper operating pressure.
INSTRUCTIONS FOR SETTING UP THE CHILL'N TAP KEG COOLER
Please read and understand these instructions thoroughly before attempting assembly, installation and operation of your Chill 'n Tap Keg Cooler. Remove and inspect all internal accessories (components) supplied with this unit are present and in good condition. A check list of accessories is listed below for reference purposes. In the event any accessory is missing and /or not in good condition, please contact our after sales service department and ask for customer assistance. TOLL FREE NUMBER "1 800 ...