Bi-Directional SDI to DV Converter DAC-5 User's Guide http://www.datavideo-tek.com Table of contents Warnings and Precautions --------------------------------------------------------------- 2 Warranty and Tech support -------------------------------------------------------------- 3 Introduction ---------------------------------------------------------------------------------- 4 Features -------------------------------------------------------------------------------------- 5 Installation ------------------------------------------------------------------------------------ 6 Editing with a DV NLE System and a DVCPRO Studio Editing VTR---- 7 Transferring from DV to SDI+AES------------------------------------------------ 8 Transferring from SDI+AES to DV ------------------------------------------------ 9 Transferring from DV to Betacam Deck --------------------------------------- 10 Operation ------------------------------------------------------------------------------------11 Front Panel ---------------------------------------------------------------------------11 Rear Panel -------------------------------------------------------------------------- 12 Dip Switches for Mode setting ------------------------------------------------- 12 Specifications ----------------------------------------------------------------------------- 15 Trouble Shooting ------------------------------------------------------------------------- 16 1 Warnings and Precautions 1. Read all of these warnings and save them for later reference. 2. Follow all warnings and instructions marked on this unit. 3. Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this unit in or near water. 5. Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing serious damage. 6. Slots and openings on the cabinet top, back, and bottom are provided for ventilation. To ensure safe and reliable operation of this unit, and to protect it from overheating, do not block or cover these openings. Do not place this unit on a bed, sofa, rug, or similar surface, as the ventilation openings on the bottom of the cabinet will be blocked. This unit should never be placed near or over a heat register or radiator. This unit should not be placed in a built-in installation unless proper ventilation is provided. 7. This product should only be operated from the type of power source indicated on the marking label of the AC adapter. If you are not sure of the type of power available, consult your Datavideo dealer or your local power company. 8. Do not allow anything to rest on the power cord. Do not locate this unit where the power cord will be walked on, rolled over, or otherwise stressed. 9. If an extension cord must be used with this unit, make sure that the total of the ampere ratings on the products plugged into the extension cord do not exceed the extension cord's rating. 10. Make sure that the total amperes of all the units that are plugged into a single wall outlet do not exceed 15 amperes. 11. Never push objects of any kind into this unit through the cabinet ventilation slots, as they may touch dangerous voltage points or short out parts that could result in risk of fire or electric shock. Never spill liquid of any kind onto or into this unit. 12. Except as specifically explained elsewhere in this manual, do not attempt to service this product yourself. Opening or removing covers that are marked "Do Not Remove" may expose you to dangerous voltage points or other risks, and will void your warranty. Refer all service issues to qualified service personnel. 13. Unplug this product from the wall outlet and refer to qualified service personnel under the following conditions: a. When the power cord is damaged or frayed; b. When liquid has spilled into the unit; c. When the product has been exposed to rain or water; d. When the product does not operate normally under normal operating conditions. Adjust only those controls that are covered by the operating instructions in this manual; improper adjustment of other controls may result in damage to the unit and may often require extensive work by a qualified technician to restore the unit to normal operation; e. When the product has been dropped or the cabinet has been damaged; f. When the product exhibits a distinct change in performance, indicating a need for service. 2 Warranty and Tech support Datavideo warrants that the equipment it manufactures shall be free from defects in material and workmanship for a period of 12 months from the date of product purchased. If equipment fails due to such defects, Datavideo will, at its option, repair or provide a replacement for the defective part or product. Equipment that fails after the warranty period, has been operated or installed in a manner other than that specified by Datavideo, or has been subjected to abuse or modification, will be repaired for time and material charges at the Buyer's expense. All out-of-warranty repairs are warranted for a period of ninety days (90) from the date of shipment from the factory. Datavideo maintains six offices worldwide to support this and other products. Datavideo Corporation (USA) 12300-U East Washington Blvd., Whittier, CA 90606 USA Tel: +1 562 696 2324 www.datavideo.us Datavideo Technologies Europe BV Californiedreef 263565 BL Utrecht, The Netherlands Tel: +31 30 261 9656 Datavideo UK Limited Unit 2 Waterside Business Park, Hadfield, Glossop, Derbyshire SK131BE UK Tel: +44 1457 851000 www.datavideo.info Datavideo Technologies Co., Ltd. 10F, 176 Jian-Yi Rd, Chung Ho City, Taipei Hsien, Taiwan 235 Tel: +886 2 8227 2888 www.datavideo.com.tw Datavideo Technologies China Co. 2F-D, 2 Lane 777, West Guangzhong Rd, Zhabei District, Shanghai, China Tel: +86 21 5603 6599 www.datavideo.cn Datavideo Technologies (S) PTE Ltd. 100 Lor 23, Geylang Rd, #01-03 D'Centennial, Singapore 388398 Tel: +65 6749 6866 www.datavideo.sg www.datavideo.info 3 Introduction DAC-5 is designed to convert SDI video and AES/EBU audio to and from compressed DV audio/video. It encodes SDI, AES/EBU digital Audio to the DV format and sends the DV stream on the IEEE-1394 interface and it decodes the DV stream arriving on the IEEE-1394 interface and converts it to SDI and AES/EBU Digital Audio output. Features Video/Audio output of component YUV, Y/C, composite video and unbalanced stereo audio for monitoring. What's in the Package Item 1 2 3 4 5 6 7 8 9 10 Description DAC-5 unit 1.2M BNC to BNC 30 cm Cable adaptor D-Sub 15 Pin to BNC-Male x 2 1.2m Y/C Cable s-plug to s-plug Stereo Audio RCA 2R to 2R IEEE 1394 6Pin to 4Pin + 2 Core 1.8m IEEE 1394 6Pin to 6Pin Cable 1.8M AC cord Switching Adaptor 12V / 2.0A User's Guide Q'ty 1 4 1 1 1 1 1 1 1 1 Features Bi-directional DV to SDI/AES-3id converter SDI video compliant with SMPTE 259M standard at 270Mbps Data transfer rate Encodes 4:2:2 SDI video and AES-3id audio to DV stream Decodes DV stream to 4:2:2 (SDI) video and AES-3id digital audio Dual IEEE-1394 6-pin FireWire (iLink) I/O ports. Available in DV25 NTSC 4:1:1/ PAL 4:2:0 format AES-3id audio input and output for interconnection with professional audio equipments Convenient NTSC/PAL Component YUV, Y/C, composite Video and analog audio outputs for monitoring and backup recording Selectable PAL/NTSC video system Locked or Unlocked DV audio and 12-bit/16bit audio encode mode selectable Fully compatible with existing Operating System software of Windows 98, ME, XP, 2000 and MAC OS and hardware for DV/i.Link processing 4 - Installation Connection: 1 DV In/Out Connect a DV source to one of the DV connectors at the rear of the DAC-5 for input and output. Source must comply with IEEE-1394 (i.Link) standard. Two 6-pin DV connectors effectively provide active loop-through when the unit is turned on. 2 SDI In/Out Connect an SDI signal to the SDI input BNC connector (left-hand side) labeled SDI. The DAC-5 accepts 4:2:2 serial digital video signals in either 525 or 625 line formats. The input signal must conform to the SMPTE 259M standard. Connect destination equipment to the SDI output BNC connector (right-hand side). The DVITC timecode in the output signal respects the same standard as the one in the input signal. 3 AES In/Out Connect an unbalanced AES signal to the AES input BNC connector labeled AES. DAC-5 supports 48 kHz digital audio sample rates. This signal must comply with the AES-3id-1995 (SMPTE 276M) standard. Connect destination equipment to the AES output BNC connector. 4 Monitoring Output Connect analog destination equipment to the connectors at the rear of the DAC-5. Use the BNC labeled Composite or the mini-Din labeled S-Video for video output; use the two RCA labeled R and L for audio output. 5 Application Examples The following figures show typical set-ups for using the DAC-5. Figure 1. Editing with a DV NLE System and a DV Cam Studio Editing VTR Non-Linear Editing System Broadcast Monitor DAC-5 Rear Panel SDI AES Source Digital Betacam 6 The following figures show typical set-ups for using the DAC-5. Figure 2. Transferring from DV to SDI+AES DV Camcorder OR DV VTR OR Broadcast Monitor Non-Linear Editing System Video Source DAC-5 Rear Panel SDI AES Destination Digital Betacam 7 The following figures show typical set-ups for using the DAC-5. Figure 3. Transferring from SDI+AES to DV DV Camcorder OR DV VTR OR Broadcast Monitor Non-Linear Editing System DAC-5 Rear Panel SDI AES Input Digital Betacam Video Source 8 The following figures show typical set-ups for using the DAC-5. Figure 4. Transferring from DV to Betacam Deck DV Camcorder OR DAC-5 Rear Panel DV VTR OR Y.U.V Output to Betacam XLR Balanced Audio Non-Linear Editing System Video Source BAC-03 Betacam Deck Broadcast Monitor 9 Operation: Front Panel Select Video Input source SDI or DV Input Select 16 Bit or 12 Bit DV Audio Encode Select the DV audio encoding frequency. 10 Operation: Rear Panel Dip Switches for Mode setting: *. Note1Mode DIP switch (Reboot the DAC-5 if you change a DIP Switch) S1. PAL or NTSC (PAL-ON, NTSC-OFF) S2. PAL: Select DV-25 PAL 4:2:0 NTSC: 7.5 IRE / 0 IRE (0 IRE-ON, 7.5 IRE-OFF) ON PAL S1 OFF NTSC S2 S2 ON DV25 4:2:0 OFF Reserved ON 0 IRE OFF 7.5 IRE *. Note: NTSC 0 IRE is most often used in Japan. 7.5 IRE is used elsewhere. S3. DV Locked/Unlocked Audio Mode S3 -- OFF: Locked Audio S3 ­ ON: Unlocked Audio (factory default) S4 & S5 for NTSC and PAL video system ON S5 OFF S4 S4 ON MAC OS OFF Windows 2000 and Windows 98 ON Windows XP and Windows ME (Factory default) OFF Camera Mode S6. Factory setting (OFF), please do not change. 11 Dual IEEE-1394 6-pin FireWire (iLink) I/O ports: Available in DV25 NTSC 4:1:1 or PAL 4:2:0 format Please Note: As long as DAC-5 is connected to a PC thru one of the IEEE1394 port, PC will disable the loop thru function and work only peer to peer in between DAC-5 & PC. Analog Video Out for Monitoring Monitor your video in composite, Component or S­Video. Analog: Component Video Y, U, V with Black Burst output Analog Audio Out for Monitoring: There are two channels unbalanced Audio output (RCA connectors Left and Right. SDI Digital Video Input and Output 4:2:2 Video SMPTE 259 M-C standard at 270 Mbps 12 AES/EBU Digital Audio Input and output Two channels AES/EBU Ch1/Ch2 In and Out thru the D­Sub 15 pin to BNC adaptor. Please refer to the pin assignment below. AES-3id unbalanced Audio Cable adaptor ch1 / ch2 In and Out AES-3id cable adaptor, connecting D-Sub 15 Pin to unbalanced 75 Ohm BNC connectors Pin assignment Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 9 Pin 10 Pin 11 Pin 12 Pin 13 Pin 14 Pin 15 Reserved Reserved BNC in (signal) Reserved Reserved Ground Ground BNC in ground BNC out ground Ground Reserved Reserved BNC out (signal) Reserved Reserved 13 Specifications Selectable Video Standards NTSC/PAL DV Input/Output Two 6-PIN IEEE1394 Fire Wire Ports Support NTSC 4:1:1, DV25 PAL 4:2:0 SDI Input/Output Two BNC Connectors Support 4:2:2 Video SMPTE 259 M-C standard at 270 Mbps Cables length up to 250 meter Return Loss > 15 dB Digital Audio Input/Output Two Channels AES-3id (SMPTE 276M) BNC connectors Impedance: 75 ohm, unbalanced Level: 1.0Vp-p Sample rate: 48KHz DV Locked / Unlocked Audio 2-Channel Locked / Unlocked Option Analog Video out NTSC (525/60) SMPTE 170M PAL (625/50) ITU-R BT.470-6 Composite, S-Video Y/C and Component Return Loss >20dB Upto 5 MHz Black Burst Out BNC 75 ohm Audio Monitoring Stereo unbalanced line out Level: 6 Vp-p Bandwidth: 20HZ ~ 20KHZ S/N Ratio: >60 dB, THD: <0.3% Conversion Delay DV to SDI mode: 1.5 frames SDI to DV mode: 1.5 frames Computers Windows 98, ME, XP, 2000 and MAC OS Dimensions / Weight 8" x 9.8" x 5.2" 203 mm x 249 mm x 132 mm Weight 6 lbs / 2.8kg Power Input DC 12V, 1.5 Amp Accessories (Included) 1.2 m BNC to BNC (4) 30 cm D-Sub 15 Pin to 2 x BNC-Male (1) 1.2m Y/C Cable S-plug to S-plug (1) ...